Multi Cam Not Working For Me

I'm running Final Cut Pro X 10.1.1 on a new 2013 Mac Pro. I'm sure it's a user error, but here's the problem. When I create a multi cam clip, I'm not seeing two camera angles in my viewer. I am definitley turning "view angles" on. Here's what I'm seeing.
Trey

entrevon wrote:
Luis,
I'm not sure what you mean by extended view but here is a look at each of the original clips inside inspector.
I mean at the bottom of the Inspector, where you see "Basic", click and choose "Extended".
The fact that you are not sure suggests to me that maybe the angle names are not set right after all.
See the picture below. You need different angle names to tell FCP X that the clips must be in different angles.
(Sometimes the software figures it out on its own, sometimes it doesn't - so I always tell it specifically :-))

Similar Messages

  • Camera not working for macbook air

    It's a macbook air A1370, iOS 10.8.3. The build-in camera is not working. Both Facetime and photobooth show that the camera is not connected. I checked the system info, under the usb session, the build-in camera is there. I followed some posts and reset the SMC, not helping.
    What should I do?
    Any help is greatly appreciated!

    tdingsh wrote:... Is there a way to re install the camera driver? ...
    Yes.  Follow the instructions for reinstalling your Mac OS X.  All necessary drivers are automatically installed by the OS X installer.
    tdingsh wrote:... Apparently ... computer is not detecting the in-built camera ...
    By using your Mac''s (option) > System Information... menu command, you can be certain whether your Mac detects its camera.
    When the System Information window opens, click on "USB" under "Hardware" in the sidebar.  Then look in the USB Device Tree window pane that opens when you select "USB". Click ALL right-facing triangles ( ▶) so they point down (▼) and reveal all individual items.
    If your camera is nowhere in the USB Device Tree window pane, your Mac does NOT recognize the cam.
    Resetting the SMC using the instructions for your specific Mac model may restore camera function.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • Camera not working for my omni10

    i have problem with camera. When i click icon it shows back sreen only.

    Hey @ganeshglone ,
    Welcome to the HP Forums!
    I understand the front facing camera is not working on your Omni 10 tablet.
    Can you tell me which model you are using? You should see this etched on the back of the tablet.
    Also if you swipe up from the bottom of the tablet screen you should see a Change Camera button. This only works in the camera app. If you are using another program please tell me which program or app it is and I will do my best to find the feature for you.
    Thanks.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Front facing camera not working for video chat on Revolution

    How come the front facing camera doesn't work on Tango? I wanted a new phone with FFC to use on Tango and for when Skype goes video on phones and it seems it don't work on Tango. Is it just Revolution or is it the same on all phones? I don't need a FFC phone to take pics of myself I have had no problem doing that on other phones, would love the feature to do what it is supposed too.

    AdamE_VZW wrote:
    Hi bulldog69!
    To answer your question, some of those video chat applications have additional 'plug-ins' that need to be downloaded from the Market as well. Just search for "tango" in the Market and see if anything pulls up. If this is not the case, try to uninstall and re-install the application from the Market.  I recommend trying another video chat app to see if that works as well. If you can take photos and video with the FFC, there's no issue with the device.
    Hope that helps! Keep us posted.
    Thank you!
    Well we have two Revolutions and i tried the uninstall and reinstall and no good. Couldn't find any plug ins.
     What other video chat apps do you know of that might work? Tried Fring and tha was junk. Thanks for any of your help that you give me

  • Camera not working for nextbook

    my friend just bought a nextbook ares 8 and the camera won't turn on when he calls. but his camera works fine in the Hangouts app or just on regular camera, can anyone help us figure out what's wrong?

    Hope info from this article is helpful.
    http://support.apple.com/kb/HT2090
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • Facetime Camera not working for Google Hangouts due to recent update. Will Apple fix this problem?

    Hi,
    My FaceTime camera no longer works in Google hangouts due to a recent update from Apple. Will Apple fix this bug soon? Unfortunately, I do not have time machine.

    I am having the same problem. Can this be fixed?

  • Why does my camera not work for Skype?

    I downloaded Skype from the app store but for some reason my camera does not turn on.  I have seen several responses on other various forums.  I guess part of my problem is also the fact that I am not as technically sound as others and I get lost in the verbage being used.  I tune out when the dialogue response gets too long. 

    in sted of using the Skype app from the app store i would do it munualy from the website. befor using the camera though on some apps or websites it should/might ask you to use the camera you will need to enter the password (if you have on) and click yes its a small box looks like something from windows. Hope that helped let me know if you have any further questions!!

  • Camera is not working for Skype in Mac OS Maverics

    Hi,
    I have MacBook Pro (Mid 2012).  I have updated it to MAC OS Maverics.
    Since then camera is not working for Skype (Version 6.8.0.351)- only at the start it works for few seconds and then it freezes.
    It was working fine with Mac OS Lion.
    Please suggest some wayout from this.

    Shirsendu wrote: ... not working for Skype (Version 6.8.0.351....
    Install Skype Update: Skype_6.9.0.517
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

    Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

    I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week. 
    Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
    Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
    Fix:
    With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
    It also supported AOL, AIM, Google Talk, Jabber.
    Guess I miss it frist time... hope this helps...

  • IPad caméra is not working for yahoo.messenger

    iPad caméra is not working for yahoo

    Yahoo messenger is a 3rd party app. You have to go to Yahoo messenger forum and see if you can find a solution.

  • Will apple replace phone for iphone 5 camera not working if older than 12 months.

    Iphone 5 main camera not working on iphone 5. Many folks comment on apple replacing phone.  Mine is older than 12 months.  Will they still replace phone?

    No. You can get an out of warranty replacement or buy a new phone. A an out if warranty replacement will be cheaper than buying a new one.

  • Iphone 6 plus front camera not working in whatsapp

    iphone 6 plus 64GB iOS 8.1 front camera not working in whatsapp

    It seems the facetime camera does not work for whatsapp only it works normally.

  • Iphone 6 plus facetime camera not working after 8.1 upgrade

    iphone 6 plus facetime camera not working after ios 8.1 upgrade, also while making calls the voice on the other side sounds distant. Any pointers.

    It seems the facetime camera does not work for whatsapp only it works normally.

  • Form Designed in LiveCycle will not work for End User

    Please Help!
    I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms.  After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help.  So here's the deal:
    I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms.  The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera.  The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken.  The second subform is basically an image field and text fields used as photo captions/photo compilation pages.  When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)).  Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells.  I was able to find a script to correctly populate those fields for each instance of the table.  Wish I had the form here, but it's at work at the moment.
    My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview.  I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X).  I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly.  However, once they save it, it gets all jumbled and they can't even print it.  We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work.  I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
    Anyone have any thoughts on my long explanation??  Please HELLLLPPPP!

    The error(s) occur when trying to save the document.  I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:"  ---> Then click the "Submit" cmd button.  That should expand the table.  Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table.  Then the user will populate each cell of the table on page 1 with data.  The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1. 
    The problem is in the distributing of the form to the user so they can save the form after populating the data.  I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos).  However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document.  Then re-opened the copy in Acrobat Pro X.  The new copy:
    -had 5 additional rows added to Page 1
    -Duplicates of some of the fields
    -Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
    Again, this all works fine in the LiveCycle Preview but not anywhere else.  I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons.  I also do not want to distribute this form to end users and then collect the data back from them.  I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

  • Wake on Demand: Not working for some services, others OK

    I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
    While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
    I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
    Any thoughts... hints... suggestions?
    One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
    Thanks in advance.

    I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

Maybe you are looking for