Multi camera problems- red screens

I'm almost seven min. into an 18 min. edit and PPCC keeps hanging up and then giving me these red screens. I've never seen this before. Anyone know what the problem is???

Hi Patrick,
I would suggest that you rollback to CS6, or whatever version you were previously using - emphatically!
Click on that little red "x" in the bottom right of your screen and check out the error messages - perhaps some sort of "media read error?" Since 8.1, users of Canon MXF media have been howling about just the sort of red-frame hang-up that you are experiencing. I personally have been having terrible audio dropouts as well. I wouldn't be surprised to learn that some flavors of Sony media might be affected as well. Adobe staff have been working on this set of bugs for about 4 weeks, and recently have simply stopped responding to the forums on the topic (the problem seems to have something to do with the metadata [xmp?] "sidecar" files that work alongside many current types of media) - it seems they have learned what they can from us and are laying low while trying to engineer a fix. Needless to say, there is an impatient mood.
If you are at liberty to roll back and start-over with your project in CS6, I urge you to do so before investing any more work into the project on PrPro8.1. Hopefully the next release will focus on stability instead of features (and highlight colors).
Good Luck,
Eric D - CoralVision

Similar Messages

Multi-Camera Problems in Premiere CC v7.1.0 (141)

I have the CC edition of Premiere and it automatically updated a couple days ago to v.7.1.0 (141), but ever since the update, I've tried to create multi-camera sequences, nest it in a target sequence and instead of just showing 1 layer of vidoe and 1 layer of audio in the target sequence, it shows all videos and all audio from the multi-camera sequence. Because of it, I can no longer enable multi-camera editing. Can someone help or anyone else having similar problems? I'm using a MBP OSX (v10.9), 2.7 GHz Intel Core i7, 16 GB RAM.

Is the "linked selection" icon selected or not? You can find that on the top right of your timeline. Toggling it allows you to drop a nested sequence (eg. multicam) on a timeline as either one single nested clip or as the expanded view with all the clips showing which it sounds like you are referring to. It's the middle icon here:
Good luck!

Red screen when switching the camera.

Hi When I switch my camera from normal shooting to face me, it appears with a red screen. when i look at the lens on the front of the phone it appears to to red inside, but the back lens is normal.
Please any info will be appreciated.
Marc.

stants66 wrote:
Hi,
Yes the screen turns red when switching the camera. No it does not stabilize & I canot see myself when switching the cam.
Yes restart your phone as suggested above. Then use BlackBerry Virtual Epert to run a camera test.
Update us with the result
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

FR: Full Screen Preview of Multi-Camera Angles

The Program monitor can be viewed in Full Screen mode, as we all know, but when the Program monitor is displaying Multi-camera angles, it can only viewed in windowed mode. Full Screen mode no longer works in this situation. This is inconsistent, illogical and unproductive, thus my new FR for Adobe to allow the Program Monitor to be viewed in Full Screen mode, regardless of what it's displaying:
(feel free to copy/paste and send as your own FR here: www.adobe.com/go/wish)
How would you like the feature to work?
*******Enhancement / FMR*********
Brief title for your desired feature: Full Screen Preview for Camera Angles
How would you like the feature to work?
The Program and Source Monitors can both be toggled in/out of Full Screen mode with a single keyboard shortcut, a fantastic feature. Why then can't the Program Monitor display in Full Screen when it's displaying Camera Angles, either with the Multi-Camera Preview Monitor on or off? A window that can be viewed in Full Screen should always allow full screen preview, regardless of what it is displaying!
Why is this feature important to you?
Consistency and a logical, productive UI is beneficial to all editors. The fact that the Program Monitor window can be viewed in Full Screen in one instance but not another, is illogical, inconsistent, and a productivity hindrance that should be fixed.
Ideally, Adobe could give us a separate, Full Screen capable window for displaying Camera Angles. This way users could display their Camera Angles on one monitor, and their Program Monitor on a second monitor, all in Full Screen mode, without the visual polution of a windowed interface whenever that interface does not contribute to the editing task at hand! Here is my thread regarding that request: Help Improve Premiere! FR: Separate, maximizable Multi-camera view. However, should Adobe be unable or unwilling to provide us with the suggested interface that would provide maximum customizability/flexibility, at the very least having the option to view our Program Monitor in Full screen mode when viewing Camera Angles would be useful.

The iSight is either 640x480 (older MBPs) or 1280x1024 (newer MBPs). Displaying it 'full screen' especially in an older MBP (which is what you have if you're posting in the correct forum) would result in a horribly pixelated image, not 'high resolution'. The apps that show the iSight feed are showing it at its native resolution, and that's a limitation of the hardware. If you need higher resolution, you can attach a higher resolution video camera (for example, my Panasonic DV camcorder connects via FireWire and can be used as a webcam).

Camera problem app, its giving me this purple images then the app freezes i press home button its goes fine back home screen it just the CAMERA APP ITSELF. i did RESTORE

camera problem app, its giving me this purple images then the app freezes i press home button its goes fine back home screen it just the CAMERA APP ITSELF. i did RESTORE

I've found a new way .. I restart the phone manually. And it works. But sometimes , the Problem reappears and sometimes it doesn't . But when it does , its just too annoying. Therefore, restarting the phone manually is a temporary solution. But what's the permanent solution for it? Let's wait and hope that someone comes up with one.
And I hope this restarting hint solves your problem too.
P.S- instagram or any other app won't make a difference. That's what i think .. Cz I don't have that app on my iPhone.

My 808 got screen and camera problems. I need new ...

My 808 got so many problem..the camera did not working well and the screen has problem..
The camera problem when recording the video, i used to use touch to focus, but the when listen to the video the weird sound was produced while i focused on something..the screen has problem when looked at the dark pictures especially on grey colour...it was not the noises but it the screen problem..
Please Nokia i need new replacement..i just used this phone, and dissapointed with this..
I bought this phone for the camera, if the camera didn't working well, what the point i bought this phone..
Please one again Nokia, I NEED THE NEW REPLACEMENT..

@Rafi808
Have you installed any third party applications to account for the sound of the continuous auto focus (CAF) mechanism?
You probably need to visit Nokia Care facility so that device can be reset to "factory settings" and completely re-install device software, before pointing towards hardware issue with camera module itself.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Problem with Multi-camera function

Hi!
I have three camera angles - I put them each on different stage but since one guy had a problem and had to stop recording the whole thing got a little messy and I had to divide audio and video tracks to compensate with audio, however two of my tracks are now splitted in two (with blank space inside) and if I use group function - "Set clip marker" is no longer working and I cannot synchronize the video and prepare it for multi-camera editing.
I hope you understand what I mean and thanks in advance for any advise!
Thanks :)

Colin,
I did a multi camera edit of Act 1 of a taped performance and all went well. Moved on to Act 2, which ran longer and each camera needed a tape change. So I matched the clips from each camera on each video track and tried to move on to the sync & then create a multi camera sequence stage of the project. That's when I hit a road block. I could not sync the four video tracks. So I consulted Adobe's on line help and this was all I could find about my predicament:
Note: Adobe Premiere Pro uses an overlay edit when synchronizing clips. Take care not to overwrite adjacent clips if you have multiple clips on the same track.
So what was I to do next? I found your post and now know exactly what to do. Thanks for a great explaination and saving me a lot of head scratching.
Why couldn't Adobe explain it as well?
Thanks,
Angelo

TS4436 Iphone 4 camera worked fine for 2 years then turned all flash photos red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Problem with the red screen

Hello everyone.
Im looking into buying a Lumia 1020, and I found one in good condition for 120e. The only problem is that it is stuck on a red screen with a Nokia logo. The only usefull thing that the sellers says is that it is stuck in on that screen, no further info.
Can someone tell me if that is a hardware issue, or a software issue, and if its software related, can it be fixed?
I want to be sure before buying the phone.
Thanks in advance.
Moderator's note: This post is edited. Please note that any form of advertisement is not allowed in the forum.

Thanks for your interest on buying a Lumia 1020, Gzgzone. The only way we can confirm the possible cause of an issue is to have the phone checked by an licensed technician at an authorized service center. Aside from that, we have support pages and FAQs that could help isolate the issues with your Lumia. Here's an example: FAQ - My Lumia phone does not work or respond as expected.
However, we recommend buying Lumia products from authorized retailers. In that way, you're assured that you will enjoy all support and warranty services we offer in case your device isn't working properly. This link will lead you to our local support finder in case you are interested to visit an authorized local retailer: MS Mobile - Change locale.
Let us know if this information has helped you decide for good. BTW, welcome to the Microsoft Mobile community!

My ipad 2 suddenly show red screen during start up and on ordinary screen show red colure fill the screen , I think it is hardware problem mostly screen. This problem didn't happen after fall or only accident ,what shall I do .

My ipad 2 suddenly show red screen during start up and on ordinary screen show red colure fill the screen , I think it is hardware problem mostly screen. This problem didn't happen after fall or only accident ,what shall I do ?

You could try a reset and see if that fixes it : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If it doesn't then you could try restoring to your last backup and/or resetting back to factory defaults. But if it's a hardware issue then you will need to contact Apple.

Multi camera synchronization problems on Premier CC

Hi
I'm working on PC. I've encountered a lot of problems in working on multi camera in Adobe Premiere CC. Could anybody could help me solve these problems?
1- when I work on Multi camera, after doing some edits, when I put some inserts in upper layers, the synchronization (sound-film) gets lost.
2- In working on Multi camera, after lots of edit and choosing of different cameras, when I close and reopen the project, the edit points are still there, but the image is from elsewhere (not sync at all) and you've actually lost all the time you made edits.
3- In another example: after using some cameras and doing some edits on Multi camera, when I closed and then reopened the project, all of that layer was back on one camera (camera 3).
Thanks, Jim.

Is the "linked selection" icon selected or not? You can find that on the top right of your timeline. Toggling it allows you to drop a nested sequence (eg. multicam) on a timeline as either one single nested clip or as the expanded view with all the clips showing which it sounds like you are referring to. It's the middle icon here:
Good luck!

Multi camera synchronization problems on Premier CC 5 minutes ago

HiI've encountered a lot of problems in working on multi camera in Adobe Premiere CC. Could anybody could help me solve these problems?
1- when I work on Multi camera, after doing some edits, when I put some inserts in upper layers, the synchronization (sound-film) gets lost.
2- In working on Multi camera, after lots of edit and choosing of different cameras, when I close and reopen the project, the edit points are still there, but the image is from elsewhere (not sync at all) and you've actually lost all the time you made edits.
3- In another example: after using some cameras and doing some edits on Multi camera, when I closed and then reopened the project, all of that layer was back on one camera (camera 3).

Aah, looked a bit further and it seems to be a bug in the program! Looks like I have to start again!!!

Massive problems with nested multi-cam sequences

Hey all,
I'm absolutely pulling my hair out over some issues I'm having and hope somebody out there might have an answer. I'm creating a short interview project, including interviews of two people individually, with two separate cameras and external sound capture. My goal is to cut between their separate answers to each question. For each interview I created a multi-cam sequence within its own timeline. Then, in my master sequence, I used the source monitor to pull out the specific clips from each interview sequence which I wanted to include, and assembled them into the master timeline.
I'm having two difficulties. First, for whatever reason, I'm experiencing audio glitching when the cuts between sequence clips occur. The glitch is like an audio "scramble," lasts about a half second, plenty of time to be distracting and detract from the whole of the project. There are no such audio glitches present when viewing the interview sequences specifically. I had applied effects to the audio tracks both within the interview sequences and the master sequence. I've since disabled every effect but the problem persists, and it is still present upon rendering the master timeline. I have absolutely no idea what to do about this.
The second issue is more general. I've got my media cache on an internal SSD, and I'm pulling my media from an internal HDD, with Premiere Installed on a different SSD with my operating system. The two interview sequences play back wonderfully, no delays whatsoever. The master timeline, however, with all the clips extracted from the interview sequences, plays slow as molasses. It takes 10-15 seconds for the play head to even start moving once I click 'play', which has made this entire process excruciatingly difficult. Is this a known issue? Why would my performance be so completely degraded working with nested sequences? Isn't everything referencing the exact same files?
Ugh, long night working on this. Thank you for any help.

Well, I've come up with a terrible, but comical solution for the second issue which doesn't involve reworking anything. It turns out that, upon launching premiere, I can play the master sequence with nested multi-cam sequences a grand total of ONCE with minimal delay. If I stop the play through, then it will take 3-4 minutes to get the sequence playing again. Of course, the Premiere decides to hang when I try to close it after playing this master timeline, so I'm finding that I can inch my way through this project by (1) launching premiere, (2) playing the master sequence, (3) make the edits I need, (4) forcibly crash Premiere, and (5) relaunch Premiere and repeat. It's a terrible way to work, but the project is so close to completion that I'm willing to suffer through it.
As to issue 1, I've taken each offending clip, extending the audio track one or two frames in the beginning of each clip, and then use those frames to ramp the volume up from silent to 0db. This seems to avoid the brief moment of distortion at the beginning. Notably I did try your suggestion by going back to the original, source audio, but I was still getting the same issue. My work-around is the only solution I've been able to come up with.

Dynamic link problem, PPro cs5 - AE cs5, multi-cam sequence

This is odd. I'm working on a two camera interview in Production Premium CS5. Did the standard stuff - a source sequence with both cameras, did some rough editing here (syncing the two cameras, trimming the clips, etc.). Then nested the source sequence into a multi-cam edit sequence. Used the multi-cam monitor to switch back and forth between cameras, etc. All is good.
But my editor wants to make three separate videos from this interview. So the logical thing (so I thought anyway) would be to nest this muiti-cam edit squence into three separate target sequences. Then I could get the camera switching done just once, and slice-'n-dice the three target sequences to make the short-'n-sweet individual videos that make my editor happy. Did this for the first target (a single question and answer). The result looks fine in PPro, and editor approves. All that's left is adding the lower thirds.
Everything fine until I go to export to AE via dynamic link so I can add lower thirds and finish up. What PPro sends to AE isn't just my target sequence, but it also sends the multi-cam edit sequence and the source sequence as well. But.... it ignores it all and will only show me the Acam footage. Bcam doesn't show up at all. Clearly this isn't working. But now I find that I can't even break the links. So I can't even start over. Sigh...
Two questions: First, how does one export a multi-cam edit sequence via dynamic link from PPro to AE, and have it show up in AE looking like it does in PPro? In other words, what did I do wrong?
Second, how can I recover from this? Do I really have to delete my target sequence in PPro and start over (and by extension, delete the AE project also)? Is there no way to sever a dynamic link once it's made?
Bruce Watson

Um.... didn't work. Seems that AE and PPro have different ideas of what "transparency" mean. The lower thirds composition in AE has a transparent (black) background which works fine in AE (I've used this lower thirds quite a bit in AE so I know it works pretty well), but when I import it into PPro it shows as white, and is completely opaque. Lettering doesn't show up either (but the letters are white so that's not such a surprise given the background), but the motion is still there. None-the-less, either way I tried it (copy and paste, or export from AE as a PPro project, then import it in PPro and drag the AE built sequence to the timeline) didn't work.
Trying to export just the lower third comp from AE through dynamic link as a PPro project didn't work either. Failed weirdly. It popped up the right sequence creation box in PPro, so I could pick AVCHD 1080p30 as the sequence type (matching the other sequences in the project), and created the new sequence with the correct name. But the sequence was empty. It wouldn't let me drag the lower third sequence anywhere either, so I couldn't put it on a timeline.
Sigh... this isn't supposed to be this difficult. But hey, if it was easy anyone could do it, yes?

Create Multi-Camera Source Sequence Options Box Problem in CS6

Hello there; it seems in my CS6 i dont the complete box as the below:-
i only have in points, Out points and Time codes ( I dont have the Audio and the remain box) as the above.
Is anyone able to en-light me? as i have to do Multicam project as as possible
Regards & Thanks

that seems to be exclusive to the CC version. so you would either have to upgrade or find a work around. you can manually sync the footage using markers or in points, or if doing this alot and you dont want to upgrade might look at pluraleyes.
manual by in points: Setting up multi-camera Sequences in Premiere Pro CS6 | lynda.com - YouTube
by marker: Adobe Premiere Pro CC Tutorial | Performing Multi-Camera Editing - YouTube
pluraleyes: Multicam edits in Premiere Pro CS5 using PluralEyes - YouTube

Multi camera problems- red screens

Similar Messages

Maybe you are looking for