Multi channel access on SSO enviroment

Hi,
someone can tell me if OID and SSO Server can support multi channel access?
I want that the users that comes from Internet must do a strong authentication (with Security Certified), but i want that intranet users can log with a light Authentication (only Username and password). It's possible

Hi Andreas,
in the document they speech about different application. But if the application is the same with a different reference for a different channel? Do you think that it work fine? If i assign to application A ip=x.x.x.x for intranet users and i define MediumSecurity_AuthPlugin and, for the same application A assign a virtual host ip=y.y.y.y for internet users i define HighSecurity_AuthPlugin.
Another question, in the manual they refers to a partner application, Is it the same for External application?
Thanks for you attention
Regards
Stefano

Similar Messages

Multi-channel audio? How ? (Dolby Digital, PCM etc.)

So,
Take 2 now support 5.1 channels audio out, at least for some HD rentals.
I am wondering if anyone has gotten that to work.
I have Apple TV connected via HDMI to my receiver (which can decode both the bitstream as well as linear PCM for multi-channel tracks).
However, I don't seem to get any multichannel, and the Dolby Digital toggle in Apple tunes makes no difference.
Has anyone gotten 5.1 to work, and if so, which which movie/tv show/trailer?
Thanks,
Dan

1. Not a great fan of detaching audio except in multicam clips. Generally I'd suggest using the expand audio components function to access the channels.
2. Yes. Switch off the auto tracks in the browser and only turn them back on for the clips you need in the project. With expanded audio components, if you turn the channels back on they will reappear in the timeline.
3. You use roles for this. I know time is tight for news, but taking a few moments to assign roles to the clips in the borwser, which you can do in globally, will allow you to export with separate tracks.

How can I use all tracks from multi-channel source audio with Multicam clips?

I cannot figure this out. Working in Premiere I'm prepping for a 2 camera show, with typically 4 to 6 track dual-system audio recorded by the sound guy. I can sync, and make multicam clips any number of ways–whether sync by timecode, sync by audio, or eyeballing–but whenever I edit using the MC clip, Premiere mixes down all the audio channels into a stereo single track, and I cannot pick and choose which audio track from the original to use. With 2-5 people mic'd on lavs, I need to be able to choose which audio is either cut in or heard at any given shot.
Is there any way to have control in multicam clips over which track of audio gets edited into the timeline, or even: that all tracks of audio get cut in? It's very important for the editors to be able to see waveform (which also disappears for some reason in the mixdown) and pick and choose which audio is heard?
I'm sure this might be a simple fix, but I cannot get my head around it for workflow purposes for my assistant editors. We need to use multicam, but this audio thing is driving all of us crazy. None of us can figure out how to have a multicam clip and use it with control over what audio is cut in.

True, but what I need to be able to do is have my multicam sequence in the source monitor, and cut into my working sequence with either just the audio I need from the sound guy's multi-channel WAV, OR cut in all the sound and from then I can just enable or disable what I need or don't need. But also be able to match back to the Multicam source from my working sequence.
I don't want to have to open the synced sequence, and razor blade the things I need and have to copy and paste into my working sequence in order to have the full spectrum of my multi-channel mono lav WAV files...with their waveforms visible.
Essentially, I want my Multicam clips to load in the source monitor, and the ability to cut them into the working sequence without it mixing down the audio into a single track with no visible waveform–which is what it is doing currently. Can I choose to edit in either ALL of the tracks of the WAV file along with the camera shot I want, or control which audio gets cut in?

Important question: I have got a PXI-4472 and I am able to do single-channel acquisition. How does multi-channel acquisition work?

Look at the VI: it is quite eleborate, but the crucial point is Data Acquisition and Trigger&Gate (and, consequentely, Write to File operation).
I can add plot on the Waveform Graph DATA, this is rather easy, simply adding the channel numbers in the channel control (es. writing 0,3,7 will collect data from the three channels).
First question: is this operation of adding plots correct?
Second question: does the sampling rate dwindle when I consider multi-channel acquisition? I mean: 1 channel-->100KHz ; 2 channels-->50 KHz
More over, and MORE IMPORTANT: is it possible to set different trigger conditions for different channel
s? How can I control this operation?
Third: can you have a look at the VI as all (the appearence, the functionality, the logical sequence...). I am looking forward to get your advice. In particular:
Look at the frontal panel: what do you suggest to make it "smaller"? More tab controls?
Look at the Block Diagram: do I have to connect ERROR IN and ERROR OUT to every suVI or function that makes this connection possible (as Trigger&Gate and Write File)?
Attachments:
Start&StopTrig_SpectralMeas_style+image.vi ‏700 KB

First: yes, the operation is correct.
Second: yes again. When you consider a multi-channel acquisition, your sampling rate must be shared among the channels.
Third: when you specify a list of channels you want to acquire from, the channel considered for analog triggering is the first you put in the list.
Connect the error clusters whenever you can,in particular when you are dealing with I/O operations.
Bye!

How to handle and manage a multi Database access in runtime with LCDS?

Hello there
I got several customer working with the same application and I wonder how, with LCDS, to manage in a runtime a multi dataBase access; without creating a configuration "mxl" file in
the folder catalina for each database.
Indeed, each customer have their own dataBase, and so far, I did not find out how to avoid creating a config xml file in catalina for every single database; which force me to create as well for each customer a folder application, since the name of the config file in catalina require a folder application to be ran under tomcat....
Thus, my question is :
Is there anyway to create only one configuration mxl file in catalina (in the server side) and then from the client side (application) let the user select its environment (meaning its database) to run the application.... this technic can be also used for multi database environment such as : Dev / Test / Prod environment (or database) where the same application can access to.
Please if any one have an idea or already delt with; just let me know, because I'm entering in a bootle neck and the situation is getting serioulsy critical....
Regards

Hello Ulrich,
with compact and repair I mean the MSAccess function "Compact and Repair".
Please follow the link below for more details:
http://office.microsoft.com/en-us/access-help/compact-and-repair-an-access-file-HP005187449.aspx
Normally you can execute this function directly in Access or with the Windows ODBC Data Sources Administrator => "Control Panel" => "Administrative Tools" => "Data Sources (ODBC)"...
I want to execute this function via cvi code and not by hand ;-).
Thank you for your support.
Frank

ESYU: R12 - Order Management를 위한 Multi Org Access Control(MOAC) setup 방법

Purpose
Oracle Order Management - Version: 12.0 to 12.0
Information in this document applies to any platform.
R12의 Order Management에 대핸 Multi Org Access Control(MOAC) setup 방법에 대해 알아본다.
Solution
일반적인 MOAC Setup:
1. HRMS에서 Security Profile을 정의:
a. HRMS Management responsibility 선택
b. HRMS Manager> Security> Profile로 이동
c. Security Profile이 정의되어 있는지 확인 (OM responsibility 혹은 Site level로)
d. 만일 아직 setup 되어져 있지 않다면 Operating Units를 입력
e. 저장
Note: 만일 위 d step과 같이 새로운 security profile을 생성하였다면 concurrent program 'Security List Maintenance'를 꼭 실행해야 한다.
그렇지 않으면 multiple operating units가 OM forms의 LOV에 나타나지 않을 것이다.
이 program은 multi-org access를 validating 하기 위해 사용하는 table에 data를 생성한다.
Navigation: HRMS Management> HRMS Manager> Processes & Reports> Submit Process & Report> Security List Maintenance
2. MO Profile Options setup:
a. MO: Security Profile - 이 profile setting은 MOAC functionality를 활성화 한다.
b. MO: Default Operating Unit - 이 Operating Unit는 OM forms과 report에서 default가 될 것이며, 이를 clear 하거나 변경하기 위해 LOV를 사용할 수 있다.
Keep the MO profiles in sync:
MO: Security Profile은 site와 responsibility level로 setting 할 수 있다.
MO: Default Operating Unit은 site, responsibility, user level로 setting 할 수 있다.
Application이 원하는대로 동작되지 않는것을 발견하면 이 profile options의 setting 값을 확인한다.
3. OM setup:
R12 upgrade 시 OM Profile에서 migrate 된 새로운 OM System Parameters를 확인:
Order Management Super User> Setup> System Parameters> Values
(See <<NOTE 393646.1>>-R12 Readiness Cheat Sheet: Migrated OM Profile Options)
4. Form에서 hidden field 'Operatin Unit'를 활성화시키고 default folder로 저장:
Sales Order and Order Organizer forms
Quick Sales order and Organizer forms
Sales Agreement forms
Pricing and Availability form
Other forms
Note: Sales Order form에서 hidden field 'Operating Unit'를 'Show' 하기 전에 fotm안에 이 field를 위한 공간을 만들어 놓아야 한다.
예를 들면 Customer Number field를 짧게 하거나 Operating Unit field로 이 field를 덮어씌울수 있다.
Reference
Note 393634.1

Hi Larry,
Have you considered adding the exec apps.mo_global.set_policy_context call to your connection's start-up script?
Tools -> Preferences -> Database -> Filename for connection startup scriptNot the most flexible approach, so I'm not sure if it is appropriate for your application, but just a thought. You might create distinct connection names with different start-up scripts for each org_id.
Regards,
Gary
SQL Developer Team

How to handle and Manage Multi DataBase access with LCDS in runtime ?

Hello there
I got several customer working with the same application and I wonder how, with LCDS, to manage in a runtime a multi dataBase access; without creating a configuration "mxl" file in
the folder catalina for each database.
Indeed, each customer have their own dataBase, and so far, I did not find out how to avoid creating a config xml file in catalina for every single database; which force me to create as well for each customer a folder application, since the name of the config file in catalina require a folder application to be ran under tomcat....
Thus, my question is :
Is there anyway to create only one configuration mxl file in catalina (in the server side) and then from the client side (application) let the user select its environment (meaning its database) to run the application.... this technic can be also used for multi database environment such as : Dev / Test / Prod environment (or database) where the same application can access to.
Please if any one have an idea or already delt with; just let me know, because I'm entering in a bootle neck and the situation is getting serioulsy critical....
Regards

Hello Ulrich,
with compact and repair I mean the MSAccess function "Compact and Repair".
Please follow the link below for more details:
http://office.microsoft.com/en-us/access-help/compact-and-repair-an-access-file-HP005187449.aspx
Normally you can execute this function directly in Access or with the Windows ODBC Data Sources Administrator => "Control Panel" => "Administrative Tools" => "Data Sources (ODBC)"...
I want to execute this function via cvi code and not by hand ;-).
Thank you for your support.
Frank

Communications Express doesn't create access Manager SSO session

Hi all,
I'm running Communications Express, Sun Access Manager and Sun messaging server, each on seperate hosts.
Single Sign On works i.e. when users have a valid session and point their browser at the Communications Express URL they can access their mail, calendar and addressbooks without further ado.
When they don't have a valid session though and the users go to the Communications Express URL they get a username and password prompt. If they enter valid credentials they will be logged in, but the session created is only a local session, not an Access Manager SSO session. This behaviour has changed from the previous versions of Comm Exp which wouldn't work at all without SSO.
Is it possible to configure communications express to either redirect users to the Access Manager's authentication page or have Comm Exp create the SSO session on the users behalf?
TIA
Herman
Versions:
- Communications Express 6.3 update 1
- Sun Java(tm) System Messaging Server 6.3-4.01 (built Aug 3 2007; 32bit)
libimta.so 6.3-4.01 (built 17:13:29, Aug 3 2007; 32bit)

Hi Shane,
as always your anwer is better then I could have expected. A more or less complete manual
just hours after asking my question. Thanks!
shane_hjorth wrote:
The cleanest solution I could develop to address the behavioural change was to
leverage a web-server policy agent to perform the redirections.
I wrote up a guide but never received any feedback unfortunately so results-may-vary.
I have republished this guide externally - feedback is welcome:
http://msg.wikidoc.info/index.php/AM_redirection_using_Policy_AgentTook me some time to implement, test and write feedback:
The setup we have is a little more complex then the a single box scenario you
have tested on:
From the internet working inwards we have load balanced
SSL accelerators (apache+SSL doing reverse proxy) in front of
dedicated application servers running communications express.
Mail is retrieved from separate mail-store clusters.
Access manager is configured similarly: load balanced SSL accelerators
in front of application servers running the login page (disributed
authentication UI). Those then talk to the access manager cluster.
Firewalls and access lists between each of those layers. None of the
applications can be accessed directly from the internet and they are
limited in what they can access in the DMZ as well.
I followed your recipe to the letter. After a bit of tweaking everything
worked like a charm. Policy agent installed and configured on the
SUN webserver where communications express is deployed.
Instructions were very good on detail and easy to follow.
We deploy uwc in the root of the server not in /uwc. Something I didn't notice right away.
It would seem that the policy agent expects the values com.sun.am.naming.url
(The URL for the Access Manager Naming service) and
com.sun.am.policy.am.login.url (The URL of the login page on the Access Manager
where users should enter their credentials) to be the same host.
In our setup the URL/host users have to use to log in can't be accessed by the policy agent.
The policy agent should verify sessions directly against the access manager cluster.
I played with some of the override settings in the policy agent configuration file but
without much success. Eventually I used the hostname our users have to use to log
in and abused the /etc/hosts file to map the external hostname to the internal address
of the access manager cluster. Users end up on the correct login page, and the policy
agent can verify the sessions. Ugly, but it works.
The other issue is that the policy agent redirects to:
com.sun.am.policy.am.login.url?goto=URL_Protected_by_Policy_Agent
When a users enters incorrect credentials they get the default login url, without the
goto parameter. (May be bug in access manager or by design...) After entering their
credentials correctly on their second or third try users won't be redirected back to UWC,
but will end up on the default page defined by their iplanet-am-user-success-url LDAP attribute.
I solved that in the policy agents configuration file by adding the gotoOnFail=URL in the
definition of com.sun.am.policy.am.login.url:
com.sun.am.policy.am.login.url = https://login.domain.com:443/amserver/UI/Login?gotoOnFail=https://uwc.domain.com:443When you enter incorrect credentials you'll be redirected back to uwc (where the policy agent
will again intercept you and send you on to the login page for your next try). May be more of
an issue in the policy agent then your manual.
Regards,
Herman

File structure and Multi-user access/control

Hi All
Currently evaluating RH. Our plan is to use RH HTML with RoboServer and either SourceSafe or Team Foundation for source control. We will be producing the "printed" manual (PDF) and publishing online help (hopefully html via RH server) from the single source layout
Given that we will edit content in RH's XHTML editor, I'm not clear on when we should create new files or the granularity of multi-user access. We have 17 apps and I plan to use a master project and merging (because we need to link to related topics in other apps).
I'm really not sure what should constitute a file in RH. First off, is access controlled at the file level?
I want to have multiple authors editing the same manual at the same time, so do I need to break the manual into multiple small files (currently it's a single word doc)?
If I do break it into multiple files, what's the best approach: 1 file per topic (or is this a requirement)?
Finally, when I come to generate the PDF, will the files be combined. (i.e. can I have different page-breaks than I have in the RH project)?
Any pointers greatly appreciated
Regards
Mark

Hi,
First off, is access controlled at the file level?
Not sure what you mean by that. In source control, you can check in/out ever file independent. Sometimes dependent files will be automatically checked out, for instance images used in the css when you check out the style sheet.
I want to have multiple authors editing the same manual at the same time, so do I need to break the manual into multiple small files (currently it's a single word doc)?
That be the idea. Anyway, it's not a good idea to have an entire RoboHelp project in a single topic. You probably want to cut up your contents into the small chunck: topics.
If I do break it into multiple files, what's the best approach: 1 file per topic (or is this a requirement)?
In RoboHelp a topic is a HTML file. RoboHelp doesn't force you to split up content into one or more topics. If you are creating help for the web, you want the information to be organized in relatively small chunck so users can quickly scan through it.
Finally, when I come to generate the PDF, will the files be combined. (i.e. can I have different page-breaks than I have in the RH project)?
Not sure what you mean by page breaks. As RoboHelp creates HTML files, there are no page breaks such as in paper manuals. When you create a PDF, you combine the topics you need into a single document.
If a PDF is required for you, you may want to consider not using RoboHelp for your sources. A PDF created by RoboHelp is useful for internal use, but it never seems to get good enough to give to customers. Personally, when a PDF version of a manual is required, I create the manual in FrameMaker and link or import the book into RoboHelp. You can also link Word documents, so you may want to play around with that before deciding whether to use Word, RoboHelp or FrameMaker for your source.
Greet,
Willam

How to display multi-channel image in the 'proxy'?

There're many examples to show how to display composite channels in the 'proxy'. But I don't find any example to show how to display multi-channel image in the 'proxy'. I found that I can use PSPixelOverlay to display alpha channel data like this:
int nSpotChannel = gChannelCount - 4;
PSPixelOverlay* overlay = new PSPixelOverlay[nSpotChannel];
for(int i = 0; i < nSpotChannel; i++){
       if( i != (nSpotChannel - 1) )
             overlay[i].next = overlay + i + 1;
       else
       overlay[i].next = NULL;
       overlay[i].data = gChannelData + (4 + i) * nPlaneBytes;
       overlay[i].rowBytes = gProxyRect.Width() * gDocDesc->depth / 8;
       overlay[i].colBytes = 1;
       overlay[i].r = 230;
       overlay[i].g = 161;
       overlay[i].b = 174;
       overlay[i].opacity = 255;
       overlay[i].overlayAlgorithm = kStandardAlphaOverlay;
pixels.pixelOverlays = overlay;
Then, Seeing red part, it will trigger a new problem, that is how to get the color value of the alpha channel by plung-in itself? It seems that no channel color value info is in FilterRecord.
If you have other solution, please tell me. Many thanks!

This is what I've been doing - was just curious if there was a way to see a more cohesive image.
If the individual EQ plugins are in fact the answer, is there any way to smooth how the Analyzer displays? The image I posted above, all of the tonal curves are very smooth. The analyzer tool shows a lot of peaks and valleys within the overall curve and it's hard to pinpoint each instrument's "sweet spot." Vocals for example are very hard to spot.
- Morgan

This is a very simple question about multi-channel audio playback

I have an mp4 file that i made and i made it 7.1 surround sound, and i'm pretty sure that this 7.1 surround sound works, as it can be played in VLC. i'm using netstream to load my files now. How do i make it so that flash can playback all 8-channels of sound? I suppose kglad would know the answer

Flash doesn't support multi-channel audio (yet?)

An application for multi-channel measurements

Does NI have a software solution for multi-channel measurements? I mean systems for measurements, tests and monitoring which contain numerous DAQ devices with thousands of sensors.
I suppose the software for such system should have the following features:
Instrument control
Sensor management (type, s/n, accuracy, calibration data, next calibration date, measurement limits, etc.)
Data acquisition
Storing data in databases
Data visualisation and analysis
Report generation
Tools for creating custom user interfaces / data visualisations for monitoring
As far as I know the DIAdem is great for data analysis, visualisation and report generation but it's not suitable for other tasks. With LabVIEW you can do anything but it's not an "out-of-the-box" solution.
Just to clarify what I'm talking about, here's an application that seems to fit the description. It's the HBM catman. Maybe someone worked with it? Do you know any analogues for it?

Just to add to Hooovahh's comments.
NI has flat out stated that they do not want to make turn-key solutions. That would take away from them being able to make tools for people to create the solutions. That is why they have alliance partners. These partners take the tools made by NI and make really cool stuff. My latest project was a software package that helped a technician build a jet engine correctly so that the turbine blades do not come out and destroy the engine (just slightly important). I have also done some test systems for space craft avionics.
So if you are really serious about this, I highly recommend finding an Alliance Partner to help you out. If you want, give me a PM and I can work on getting you and a few people on my side to discuss your requirements and proceed from there.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Can PCM multi-channel wav (not DD or DTS) be sent over SPDIF

<Can PCM multi-channel wav (not DD or DTS) be sent over SPDIF? --- X-Fi Elite Pro SB055A and Audio Creation Mode ---
If I understand correctly, SPDIF format can support uncompressed MULTICHANNEL wav format (within the limitations of its bandwidth) as well as the more usual DD or DTS encoded format on SPDIF.
One of the neat things about Creative's Audio Creation Mode in the Recorder section is the ability to actually record to a multi-wav format (but the sample size seems to be fixed at 24 bit). This means it is quite simple to have several mixer inputs and record a mixed multi-channel wav file in one go. Great and this works as expected with a 5. ?24 bit/48 kHz recorded test file.
My question is when one plays this recorded multi-channel wav file back, the mixer monitor (playback) shows the various 5. (say) channels with their separate content. Can this multi-channel *uncompressed* wav data? be sent over the SPDIF output as is to preserve the PCM quality? (so no DD or DTS encoding used)? I have tried this and I?ONLY seem to be able to get a STEREO (2 channel mixed down) version received at another SPDIF-in sound card (my Audigy 2ZS PCMCIA). I tried almost all selections at both ends involving SPDIF.

@? In answer to my own question, and I think I had known this a while back, SPDIF standard only supports transmission of either 2 channel PCM (uncompressed) stereo with up to 24 bit resolution per channel and up to as much as 92 kHz sampling frequency, or compressed (DD or DTS) multichannel audio up to 5..
Since each frame of SPDF is 64 bits in length (with a single sample of L and R channels plus extra bits of status in each frame), at 92 kHz max sampling rate, this translates to about 3 Mbits/sec bit rate. However most SPDF don't support the 92 kHz rate (which for 24 bit would be the stereo rate for DVD-Audio) for various copyright protection reasons.
Here is short demonstration of SPDIF transmission of 24bit/96 kHz between two sound cards with and without "bit accurate for playback" enabled:
? http://www.jensign.com/spdif/

Multi-Channel (more than stereo) Audio Editing

Hi, is there a way of setting Audition, to when opening multi-channel WAVs, to open them all in one display?
Currently, if you open a stereo WAV, you get both channels visible so you can edit both channels as one.
However, if you open a 5.1 WAV, you get six separate mono WAV files listed.
This is a bit of a serious challenge to me as I'm trying to edit some surround SFX!

I'm afraid that currently, Audition is two channels per track max. I have no idea whether this will change in the future - a lot of other DAWs these days can certainly cope with more than two channels per track - I think Reaper does, for instance.

Multi-Channel output audio from Quick Time (or iTunes)

Hello all,
I am trying to get multi-channel AC3 audio output from QT and can only get two channel stereo. I have seen lots of related posts but can't quite get it.
I am trying to configure a Mac Mini to output properly via the TOS link port to my audio system. I get surround sound fine playing a DVD but not when playing a .m4v file that does give me surround sound when played on my Apple TV.
Should this be possible?

I appreciate the link Brent! I also had someone point me here http://fplanque.com/dev/mac/ac3-ac-3-5-1-surrond-sound-apple-mac-osx and all is good now.
Thanks!

Multi channel access on SSO enviroment

Similar Messages

Maybe you are looking for