Multi clip editing

First Multi Clip edit - I can;t find how to adjust a portion of a clip. If I revert back to original media and change a select part - the entire clip changes too.
Mmm, what am I missing/doing wrong, please.
Keith

The place to do color correction is in the Angle Editor.
Here is a brief support doc summary.
There are also several good video tutorials and demos on the subject. Here's one of them.
Russ

Similar Messages

Mpeg streamclip and multi clip editing

I am working on a project in which I have two pieces of video. My main camera for talent and mp4 files from a software that captures video screen movement.. similat to camtasia.
My Talent cam settings are frame size 1440 x 1080i @ 29.97 fps.
I'm trying to run the mp4's through streamclip to make them into a file that will work with my talent cam.
I'm wanting to do multi clip editing but I cannot get the file from streamclip to work with my talent cam. I get warrnings that the frame sizes don't match... so I fix that, then I get warnings that the video rate doesn't match and I get that fixed. then I get warnings that the codec types don't match.
I've used pro res 422, apple dv- dvc ntsc with the same frame and fps settings, AVI settings etc... to many tries to remember them all.
Can anyone tell me a good setting from streamclip that will work to do a multi cam edit?
R

Have you tried using compressor? Has a lot more controls and it might do the trick.
Wondering if a difference in field dominance could be causing this.
What do you mean by avi settings? avi files are not gonna work in fcp.
If you have 2 short clips from each source and want to send them to me, I'll see if I can figure what's up.
My email is in my profile.

Multi-clip editing not working

Hello everyone,
I need help with the multi-cam editing feature, I have done everything I know to be correct to setup my multi-cam editing.
1. setting a common in point with my 3 cameras
2. selecting each and creating my multi-clip
3. setting my RT settings for multi-clip editing
4. making sure open is set
The blue marks show up as I switch from angle to angle( I'm using the number pad as my switcher). The problem comes in when i stop and press the spacebar. The blue markers disappear and the cuts don't show up. Please help me understand what I could be doing wrong.

Thank you all for answering my question. Yet I have done all these things you both mentioned. Its as if there is a glitch. Prior to this post I found that I was switching and not cutting my selections, the adjustment was made and finally I thought I could edit in peace. When I hit the space bar after my cuts (no longer just selection) do not conform to my multi-cam timeline. I mean is there an order I should be doing things in to have this work. The crazy part is that it works sometimes and other times it just doesn't want to function correctly.
steps taken:
1. Setting a common in point with my 3 cameras
2. Selecting each and creating my multi-clip
3. Setting my RT multi-clip settings for multi-clip editing on timeline
4. Loading my keyboard layout (which Cut video to angle etc.)
5. Making sure Gang is set to Open
6. Double click on multi clip in sequence to load onto viewer
7. Setting my audio to center and other two to video only
-play the sequence, start switching and hope/ pray my cuts conform to the Seq.
I'm I doing something out of order here ?
thanks in advance
-Jay

Multi Clip Editing Suddenly Stopped Working

I have a very strange situation and I wonder if anybody else has encountered this. I have a G5 running OS X 10.4.11. It's a 1.8GHz processor with 1.5 GB RAM. I have two 17" monitors connected to it: an older Apple Studio Display and a new Apple Cinema Display. I might add that this computer has been a completely reliable workhorse for me when it comes to Final Cut Pro, After Effects and Photoshop. A recent upgrade to Final Cut Studio 2, however, left me unable to run Motion very effectively if at all. I was also unable to run any of the Noise Industry plugins that I really wanted to use. After seeking advice, I installed a Radeon X800XT graphics card. Visually I didn't notice any striking difference in the images on my screens, BUT I was able to run Motion in real time they way it's supposed to run AND the Noise Industry plugins that I downloaded to demo worked great.
At the same time I installed the graphics card I also decided to move a FC Pro project and all the related media off of an external LaCiie porsche drive (250GB) and onto my second internal drive (150GB). Prior to the move, I had been working on the project—a concert shot with four cameras—using multi clip editing without a single hitch.
All of a sudden, FC wouldn't even launch. Click on the icon — nothing. Neither would Soundtrack. All the other components of the Studio worked fine. So I removed ALL the Final Cut elements — and yes, I got them ALL. Re-installed the software and accompanying media. Same problem. So then I moved the previously mentioned FC project back on to the La Cie drive, did a clean install of the OS on my other internal drive, did all the appropriate upgrades, did a clean install of FC Studio on THAT drive and all the appropriate upgrades. This time FC (and Soundtrack) launch like they're supposed to — but when I go into my multi clip project and double click on the track in the timeline to "send" the 4-camera view to the the viewer, I consistently get the spinning beach ball of death.
I apologize for such a long preamble to my problem, but I wanted to convey as much information as possible. Has anyone ever encountered anything like this before? I know the next step is probably to swap my old graphics card back in, but before I do that I wanted to see if the esteemed forum had any suggestions,
Any ideas or suggestions would be greatly appreciated.
Cheers,
John

bummer.
Moving multiclip projects from the desktop may have resulted in some sort of corruption dunno... Media manager might have done a better job of this, but I've never moved a project that had multiclips in it.
Only thing I can suggest is a rebuild of the timeline? Maybe just copy and paste it all to a new sequence and/or to a new project file?
Jerry

Tutorial DVD for Multi-clip editing

Hello,
Can anyone suggest a reasonably priced Tutorial DVD, that takes you through Multi-clip editing? And/or perhaps a website that has tutorials? I've seen a few, but as expected, it only shows a few of the steps - many thanks.

here you go...
http://www.kenstone.net/fcphomepage/multicam_editingmartin.html
and...
http://www.rippletraining.com/finalcut_pro5.html
Mac OS X (10.4.8)

Line Up Clips for a Multi-clip Edit

Hi I am editing a dance video, when it was recorded at the event a few of the camera people decided to pause after every song - this has made it a hassle to edit. I am trying to line up the clips to get them all in sync for a multi-clip. The only way I could think of to do this was give each camera angle a track and line them up that. I almost have them all lined up, but I have no idea how to make it back into one clip, since it is currently cut into tons of pieces. How do I combine them back into one clip? The closest I could find was Nesting, but that creates a sequence, and I can't make a Multi-clip out of sequences.
Each video track is a different angle, the screenshot I posted doesn't show all of the clips lined up, because I didn't get quite that far. How can I make this into a multi-clip
I just started using Final Cut about a week ago and I don't really know how it all works....yet.
Any help would be appreciated.
Screenshot: http://arch.kimag.es/share/16064428.png

http://discussions.apple.com/thread.jspa?threadID=1207003&tstart=25
Thrillcat (and others) posted a great solution to your situation in the above thread...
K

Computer stops during multi-clip editing

I have plenty of RAM and am utilizing a 200G external HD but when I begin editing in multi-clip mode the program stops. Is there an optimum setting I should know about?

What do you mean it stops? More details please...
Patrick

Nikon SLR video to multi clip editing

I did a multi cam video shoot for fun and one of my camera's was a SLR Nikon 300s. I recorded it onto a CF card & it was recorded as AVI files. I imported the AVI file into the browser along with the other video which was shot on sony z5 cams. When I click on make multi clip I get a warning that the Frame rates don't match. and I notice the Nikon is shot at 24fps with a frame size of 640x424.
OK, I thought, so I exported out the AVI as a QT file (exported both from FCP and QT player) with a setting of dv/dvcpro-ntsc best quality, 29.97 fps, aspect ratio 4:3 and 720x480 dimensions.
When the file is finished and I import the new QT file into FCP browser it still doesn't open a multi clip. Seems the browser fps setting is reading 30fps even though it was set to 29.97fps in export.
Question is... any idea how to get this file to be 720 x 480 with a 29.97 fps setting to show up in the browser?

Well...your Z5 is an HDV camera...HDV, 1440x1080. That still doesn't match the DV 720x480. They need to match EXACTLY...in every possible way.
Or...make life easy and get PluralEyes to sync this up. No need for FCPs multicam.
Shane

Showing Multi clip editing in timeline (track by track)

I think I saw a tutorial where a person was showing how to multi edit and at the end he pressed a short cut to reveal all the separate camera tracks on the timeline. How is this done?
Example ... of course when multi editing in the timeline, there is only 1 track of video even those your choosing multiple sources in the viewer. How do you show all the clips in the timeline of you wanted to see all of them?

Does my question make sense?
Can this be done?

HOW CAN I DO MULTI CAM EDITING, OR MULTI CLIP EDITING

I want to know how i could do mulit cam editing or multiclip editing with final cut express.

Here's how I did it a few times:
1. Add video tracks (and audio tracks if needed) to your timeline to equal the number of cameras you have. Of course if you have more than 4 this will start to get impractical.
2. Edit in your clips from your different camera angles, one to each video track.
3. Double click each clip in turn to get it into the viewer and click the Motion tab. Change its scale to 50%.
4. Select each clip in turn in the timeline and move it to one corner of the canvas. You need to have "image + wireframe" selected in the Canvas popup menu in order to move it with the mouse.
You should now have up to 4 different camera angles shown at the same time in the Canvas, each in its own quadrant.
5. Now the hard part is to align each clip according to time. Hopefully you have some sort of visual cue you can use to align the clips.
6. Then play through the timeline and use the razor tool to cut the clips where you want a camera angle change.
7. Select each camera angle piece you want from each cut you made and change its scale back to 100% and center it at 0,0. Delete the unused clips.
8. If you want, you can move all the clips that remain back to v1 so that you can use transitions between them.
What to do with all the various audio is another question. I usually use the audio from the best source all the way through, only changing to the other camera angle's audio when necessary.

Multi Clip editing problems -Final Cut Studio 2.0

When I have the split screen for the two video tracks I'm editing in the left box and I select either number one or number two,to become the msster, the master video screen on the rightside of my monitor turns green snd the picture becomes fragmented. This phenomena seems to occur on a random basis with either subclip. The program will quit within a minute or two after this occurs. I've reinstalled the system, reinstalled the program with no luck. Everything works up to the point when I merge the two subclips into a master clip.

What format are you editing? AND what do you mean it all works until you merge subclips into a master clip? Are you talking about making a multiclip? Also post what system you're running i.e. Mac? Drives? Graphics card? OS and version of QT?
Jerry

How edit DVCPro HD and HDV footage in the same multi-clip project?

Dear All
I am to edit a music video material shot with two cameras. I received the footage as .mov files, but one file is a DVCPro HD 1080i50 codec and the other is a HDV 1080i50 codec. - It seems the music concert was recorded on two different cameras (I guess one was Panasonic the other Sony).
How can I edit the music video using multi-clip editing? - I guess I will have to reconvert one of the footage-format to match the other format. If so, which conversion assures the best quality: from DVCPro HD to HDV or vice versa?
Or should I ask for the original tapes and then import all as a HDV codec (is that possible with the DVCPro?)?
I have never worked with the DVCPro codec before. So any links further explanations and tutorials are appreciated.
Many thanks,
Hynek

Dear Tom
Thank you for the tip. I converted the DVCPro footage into a HDV file and it looks good. The new file is only 9BG compared to the DVCPro file of 39GB. Quite surprising that such a down-conversion still results in a rather good quality.
Hynek

Insert source clip after multi-cam editing, how?

hello
I created a sequence using multiple clips and did all my colour corrections. Then I created a new sequence by dragging on new items, sequence is now green. Enabled Mulit-cam editing and started the process.
After i finished, I noticed two clips have blown highlights. Looking at original source I accidentally add two levels. I tried deleting the blown highlight clips and replace them with the original, this did not work too well.
Is there a method I can insert clips after multi-cam editing?
I hope all this makes senses.

Here's how I did it a few times:
1. Add video tracks (and audio tracks if needed) to your timeline to equal the number of cameras you have. Of course if you have more than 4 this will start to get impractical.
2. Edit in your clips from your different camera angles, one to each video track.
3. Double click each clip in turn to get it into the viewer and click the Motion tab. Change its scale to 50%.
4. Select each clip in turn in the timeline and move it to one corner of the canvas. You need to have "image + wireframe" selected in the Canvas popup menu in order to move it with the mouse.
You should now have up to 4 different camera angles shown at the same time in the Canvas, each in its own quadrant.
5. Now the hard part is to align each clip according to time. Hopefully you have some sort of visual cue you can use to align the clips.
6. Then play through the timeline and use the razor tool to cut the clips where you want a camera angle change.
7. Select each camera angle piece you want from each cut you made and change its scale back to 100% and center it at 0,0. Delete the unused clips.
8. If you want, you can move all the clips that remain back to v1 so that you can use transitions between them.
What to do with all the various audio is another question. I usually use the audio from the best source all the way through, only changing to the other camera angle's audio when necessary.

Multi-cam edit issues with multiple DSLR clips

Hello,
Working in CC. I have 2 camera angles that were filmed with 2 DSLRs, and mic'd audio that was recorded into a Zoom H4N. Audio recording never stopped, but due to the nature of DSLRs, the 2 cameras would stop recording every 12 +/- minutes. In this end, I have:
Camera 1 - 16 clips
Camera 2 - 17 clips
Zoom H4N - 1 track
When using the multi-cam source sequence option, it understandably thinks each clip is a new camera/angle. However, that's not very helpful for me when I have 17 angles (15 of which are blank) showing up in the program monitor. Any suggestions on how to better tackle this dilemma?
Thank You.

Thanks, Mark. Appreciate the quick response. After messing around, I combined your method with PluralEyes (seemed less tedious that syncing 17 clips manually). There might be a faster/easier way, but this is what I did, in case any one is curious (sounds more tedious than it actual is):
1. Select cam 1 clip 1, cam 2 clip 1 and external audio in the Browser.
2. Left-click, "create Multi-Camera Source Sequence." Two angles and audio are now in a multi-cam sequence. Rename as Multicam_Source_Sequence
3. Create new sequence, called Sequence_01 and open in timeline.
3. Excluding cam 1 clip 1 and cam 2 clip 1, drag all remaining clips of cam 1 to V1, all remaining cam 2 clips to V2, and single external audio to A3 into Sequence_01 timeline.
4. Launch Sequence_01 into PluralEyes 3. Sync and Export.
5. Open PluralEyes' "Sequence_01_synced" (not "Sequence_01_synced Replaced") in timeline.
6. Find a good marker point toward the beginning of the audio where it has synced cam 1 clip 2 and cam 2 clip 2. Cut at that point.
7. Copy all video tracks (exclude audio tracks).
8. Find Multicam_Source_Sequence and open in timeline (un-nested, so that all tracks are revealed).
9. Manually find the same audio marker point where you cut in Sequence_01_synced. Place playhead directly at cut point.
10. Paste video clips. All tracks are now synced in a multi-cam sequence.
From here, it's the usual steps for preparing multi-cam editing, like you mentioned.
11. Create new sequence, called Multicam_Working_Sequence. Open in timeline.
12. Make sure nesting button is turned on in timeline.
13. Drag Multicam_Source_Sequence into Multicam_Working_Sequence.
14. Right-click the nested sequence>Multi-Camera>Enable.
15. Enable Multi-camera view in Program Monitor's panel menu.
Voila! Took me awhile, but this works.And no 17 angles popping up in the program monitor. Let me know if you'd add (or remove) anything. Thanks, again!

PLEASE help with multi-cam edit issue (head about to explode...)

PLEASE believe me when I say I've watched 20 YouTube videos on the subject, read the manual, reinstalled FCS on a new machine (in the event that the install or my last MBP was at fault), etc., etc....
JUST can't get FCP to make the cuts for me when I click on the angles in the viewer.
Despite making a multi-clip, open synch, green/blue boarder for audio/video angle and blue boxes for video only, rendering, etc., the same thing always happens...
When I hit the space-bar, making all the angles play @ same time in the browser, and then I click on an angle to make a real-time cut, the in-point of the selected angle pops onto the canvas (a still frame) and everything STOPS.
Happy to describe any other details; can begin to tell you how stoked I'll be if I can get past this...
(I've been reduced to trying to use iMovie to cut this 3 angle live-music performance video, which is taking HOURS for a single song...with terrible results...)
:-/

Starting over:
1) Import 3 .dv clips (all same frame size, vid rate, compression, etc.)
2) Create new bin for footage, assign angle numbers to clips
2) Add in-point for synchronization
3) Make multiclip (and synch in-points)
4) Double-click on multiclip (and it then shows in viewer)
5) Press "overwrite" to bring multiclip into timeline
6) Open playhead sync
7) Assign blue and green 'boxes' in viewer (audio/video, and video only)
8) Click into timeline, make sure playhead is to the front of the sequence
9) hit space bar to start editing.
10) NOW, whenever I click on an angle in the viewer to make an edit, playback stops and a still frame for the selected angle shows in the canvas.
ANY THOUGHTS??

Multi clip editing

Similar Messages

Maybe you are looking for