Multi-clip help!!!!
I have a project with 17 seperate multiclips. I first started making 1 multi-clip then editing it, then making the next and editing that and so on..... After making the 2nd multi-clip, when i try to edit it, the viewer locks up and wont let me change angles or between open and sync off. I get a message saying..
"Sequence error: Unable to add clip to sequence.
Possible media limits problem in clip or sequence."
Now this problem is solved by restarting FCP, but it persists after i edit one multi-clip??????? Will trashing preferences help???? Maybe I have some setting wrong???? Any help would be appreciated. Thank you.
If the problem goes away with a restart of FCP it does sound like trashing prefs could help. If it only happens on one certain multi-clip you might have to identify a bad clip that is in that multi-clip. But be aware FCP multi-clip/multi-cam is very powerful but very strange in its operation and behavior. You must research, read and do tutorials before expecting to operate without error.
Similar Messages
-
Line Up Clips for a Multi-clip Edit
Hi I am editing a dance video, when it was recorded at the event a few of the camera people decided to pause after every song - this has made it a hassle to edit. I am trying to line up the clips to get them all in sync for a multi-clip. The only way I could think of to do this was give each camera angle a track and line them up that. I almost have them all lined up, but I have no idea how to make it back into one clip, since it is currently cut into tons of pieces. How do I combine them back into one clip? The closest I could find was Nesting, but that creates a sequence, and I can't make a Multi-clip out of sequences.
Each video track is a different angle, the screenshot I posted doesn't show all of the clips lined up, because I didn't get quite that far. How can I make this into a multi-clip
I just started using Final Cut about a week ago and I don't really know how it all works....yet.
Any help would be appreciated.
Screenshot: http://arch.kimag.es/share/16064428.pnghttp://discussions.apple.com/thread.jspa?threadID=1207003&tstart=25
Thrillcat (and others) posted a great solution to your situation in the above thread...
K -
** lost multi clip ability...
Hi
I seemed to have lost multi clip ability...
I have a multi clip in timeline, i dbl click its in the viewer showin two feeds.
Yesterday when I synced I could play the timeline and the viewer would follow.
I cannot do this today, not sure why also my (play multi clip) from the RT drop down is not there. I do not know if I have done something that has change the settings.
Is there something I am missing?
I need to somehow get this working as it was before, any ideas?
Please any help would be grateful
TeeFX3 Questions for you:
1. Where is the source media located?
2. Has your timeline been completely rendered?
3. Can you verify that the "Show Multiclip Angles" in the View menu is checked?
Some other threads which may help you:
http://discussions.apple.com/message.jspa?messageID=5032772
http://discussions.apple.com/message.jspa?messageID=5003461 -
Multi-clip - number pad makes marks, but no actual cuts?
4 cameras. Set up as multi-clip. The toggle buttons work to cut the angles just fine. But I can't get the keypad (number pad) to make the cuts. It makes the marks on the fly. When I stop the play the marks disappear and there are no actual cuts. I've done this successfully many times before. Can't figure out why it isn't working this time, why the marks don't become cuts when I stop the play.
I bet I've mis-clicked something somewhere.
Any ideas out there?
BenI gave you a 'This helped me ...' when in fact you deserved a 'This solved my question'. Thank you mucho Michael. I work days, weeks, months on FCP ... and forget that I can actually 'set' things differently. I'm always amazed and pleased when I discover a new keystroke or something ... or rather, when someone introduces me to it. And immediately incorporate it into my routine. But I hardly ever go looking for the things. I just want to get the film cut. And in FCP, one can go on learning the techno forever it seems ... so many ways to do something.
Really do appreciate your help. This will very much speed up my day with a deadline looming.
All the best,
Ben
P.S. If there is any way I can go back and give you a "This solved my question," I would do it in a flash. -
So im editing an 18 multi cam music video... Each clip I didn't sync by time code, but I made a sync mark at each beginning track so I have a basic rough outline reference point. I marked in each clip so it syncs up to that sound marker... And then I multi clip all of them. They are all roughly in sync...
Now im scrubbing the first individual camera 1 so it could be perfectly in-sync with the main song.... Moments later,Camera 1 is all synced up...
Now I check lets say Camera 2 and its completely out of sync its like in the middle of the song, how did it catch up to that point when I didnt even touch/move any other cameras? What do I do?
Its like when I synced the first one clip everything else bounced way out of sync even though I didn't touch it...
I also tried less cameras like 15 and still did it...
Any idea? Help?
Thanks guys!
-BWell it was a 1 camera shoot project. I just organized each input to match my sound sync... but if i scrub to perfect the clips, the other clips some how go way out of sync, really strange.
Im running on the most up to date quicktime, FCP and OS system... But have a Duel G5 Tower.
What im doing is, Im not perfecting the multiclip file, just gonna cut it together then scrub it on the timeline when its all set in... -
I am new to Mac and Final Cut Pro.
I am trying to use multi-clip for a music video.
I have imported 4 video clips (put them on my desktop) into Final Cut Pro,
rendered each one.
Modified the clips to start at the same, started a new bin, put the clips there,
then I selected them all and Made a Multiclip...it was created.
I started a new sequence, put the new multiclip in the sequence
the problem is here, all the four clips appear in the viewer box but when i push play, they play very, very slow and choppy. When i select a different clip while these choppyness is playing (it does not modify the multiclip in the timeline). Also another thing I noticed is that the multiclip in the sequence is not high-lighted in green.
How can I get the multiclips to play smoothly and change screens?
sorry for the poor description, help is greatly appreciated.Thank you both. I will try to answer the questions to my best.
The video was recorded with Canon60D
The format is .MOV
Sequence Preset
DVC PRO HD 1080i50 FireWire
Michael, how do I check if the scratch disk is formatted mac OS extended?
Thank you both. -
Multi-clip editing not working
Hello everyone,
I need help with the multi-cam editing feature, I have done everything I know to be correct to setup my multi-cam editing.
1. setting a common in point with my 3 cameras
2. selecting each and creating my multi-clip
3. setting my RT settings for multi-clip editing
4. making sure open is set
The blue marks show up as I switch from angle to angle( I'm using the number pad as my switcher). The problem comes in when i stop and press the spacebar. The blue markers disappear and the cuts don't show up. Please help me understand what I could be doing wrong.Thank you all for answering my question. Yet I have done all these things you both mentioned. Its as if there is a glitch. Prior to this post I found that I was switching and not cutting my selections, the adjustment was made and finally I thought I could edit in peace. When I hit the space bar after my cuts (no longer just selection) do not conform to my multi-cam timeline. I mean is there an order I should be doing things in to have this work. The crazy part is that it works sometimes and other times it just doesn't want to function correctly.
steps taken:
1. Setting a common in point with my 3 cameras
2. Selecting each and creating my multi-clip
3. Setting my RT multi-clip settings for multi-clip editing on timeline
4. Loading my keyboard layout (which Cut video to angle etc.)
5. Making sure Gang is set to Open
6. Double click on multi clip in sequence to load onto viewer
7. Setting my audio to center and other two to video only
-play the sequence, start switching and hope/ pray my cuts conform to the Seq.
I'm I doing something out of order here ?
thanks in advance
-Jay -
Problem with multi-clip... viewing angles during playback
Hi everyone, this is my first post here.
I'm having trouble with my multi-clips. I create the clip with three clips, and set it up to view 4 angles at once. However, sometimes during play-back, the viewer will revert to a single view of whichever view is currently selected. How do I keep this from happening? I made sure it's set to "open", and still set on 4-up. I have no idea what's causing it.Welcome to the forum,
My guess is you've allowed the multiclip to render (causes single frame viewing only)...
I'll usually...dbl-click multiclip in timeline, then set it for open with viewer window button, then single click in an empty space in the timeline.
So, try deleting renders and the second suggestion...see if that helps.
Further, I've set a keyboard shortcut for the 'open' function, so now all I have to do is dbl-click multiclip, hit the '/' key, then click in open space in timeline.
Hope that helps,
K -
Multi-clip almost never works for me on the first attempt
Anybody know why when setting up a multi-clip, I can almost
never get it to work the first time I hit the timeline to start playing.
All my settings are correct, but either the viewer or timeline doesn't move on the first time try.
All I do is take my playhead back to the beginning of
timeline, hit play again, and usually it then starts working correctly. Sometimes I have better results if I hit the play in the Viewer instead of the Timeline, but it's not a consistent thing.
Again, I'm in open sync in Viewer and Canvas/Timeline, I'm in Unlimited RT, dynamic video quality and frame rate, multiclip activated there, turned off high quality scrubbing, ect.
I'm usually doing this with (3) short 3 minutes DV clips
on a mac book pro.
When I do get it going after the second, third or fourth attempt, I haven't changed any of the settings,...I've just confirmed that they were right to begin with.
Anybody else experience this and any ideas on how to get it to work correctly first time out?
Thanks.so effectively it's on a different drive, sort of
But still using the same reader heads as your primary drive. So technically, it's still the same drive.
I just cut a 4 angle music video last week using my MacPro at work, and even with the source media on a FW800 G-Raid, I was still getting delayed playback and couldn't even view the 4-up display when playing back. So I moved the project to our XSAN, and with the fibre backbone there, bandwidth was definitely increased.
So the other variable in this problem is bandwidth as well as RAM. I know that a fibre based storage system isn't in everyone's budget, but I'd recommend trying out an eSATA based drive, given that I had trouble with 4 streams over FW800. -
Multi-language Help in a multi-language web app
Hello!
I had posted this on the RH HTML forum but removed that and
posted here for a wider audience...
***Please note: this question is not specific to RH but is
applicable now that RH 7 is unicode enabled. If you have experience
that does not relate to RH, please share anyway!
Once I have developed WebHelp (for example) in multiple
languages, how do I connect the help files to the web application
that the help is about? How does the correct language output get
displayed? For example, the application (that the help documents)
changes its interface based on browser language. Can the
appropriate help content be displayed based on browser language?
How is multi-language help generally implemented for an end user?
And, equally important, how does context-sensitive help
(mapping) work with multiple languages?
I have never been involved in a multi-language development
effort and so I have no experience to relate this to. Any guidance
will be greatly (and gratefully
) appreciated!
KathyThat's how our developers do it, but I just want to throw in
one other detail. The help output for each language has to be in a
separate directory. So if you have 5 languages, you'll have 5
directories. It's up to the developers to code the app so it
detects the browser language, then looks in the appropriate help
directory when the user clicks your help link or icon.
--Ben -
How edit DVCPro HD and HDV footage in the same multi-clip project?
Dear All
I am to edit a music video material shot with two cameras. I received the footage as .mov files, but one file is a DVCPro HD 1080i50 codec and the other is a HDV 1080i50 codec. - It seems the music concert was recorded on two different cameras (I guess one was Panasonic the other Sony).
How can I edit the music video using multi-clip editing? - I guess I will have to reconvert one of the footage-format to match the other format. If so, which conversion assures the best quality: from DVCPro HD to HDV or vice versa?
Or should I ask for the original tapes and then import all as a HDV codec (is that possible with the DVCPro?)?
I have never worked with the DVCPro codec before. So any links further explanations and tutorials are appreciated.
Many thanks,
HynekDear Tom
Thank you for the tip. I converted the DVCPro footage into a HDV file and it looks good. The new file is only 9BG compared to the DVCPro file of 39GB. Quite surprising that such a down-conversion still results in a rather good quality.
Hynek -
Only one angle is playing in multi clip sent back to FCP from Color
2 camera Multiclip edited and rendered in FCP 6, sent to color, played ok after color adjustment.
Rendered in color, and sent back to FCP; second angle in the clip is blank (black).
tried different settings in color prior to sending, same result.
The multi clip plays ok in FCP prior to sending to color, and plays ok in color prior to sending to FCP.
Any idea what is being missed here to make second camera show?The fix you can try is to Media Manage the project exporting the active Multiclip selection as independent. With that, you might even be able to create a new COLOR prj and import color corrections, so not much repeated labour.
jPo -
Multi-clip with different video codecs. Can it be done?
Is it possible to create a multi-clip when using different video codec (i.e. HDV 1080i50 & HDV 1080p25)?
Thanks.Nope. Convert one to match the other using Compressor. Or better yet, convert them both to matching ProRes 422 files.
Message was edited by: thrillcat editorial -
I'm using Multi-clip in FCP 7 to edit a two cam shoot. I've noticed that after rendering a Multi-clip video track, the independent camera views no longer show in the Viewer. They show when playback is stopped but when playback starts, the Viewer appears just as the Canvas appears and the two run in sync. There is no way to, that I know of, to get back the independent camera displays in the Viewer.
Is there a way to get the Viewer to show the multi-cam displays in the Viewer after a Multi-clip video track is rendered in the timeline?Delete your renders.
Multiclip timelines should NEVER be rendered. For a good explanation why, read through the section on multiclip editing in the manual.
x -
Multi clip won't open, get general error message
I have a multi clip that contains only 2 clips. When I double click the multi clip, I get a "General Error" "Out of Memory" message. I threw away the preferences and restarted, not sure what else to do. FCP 5.0.6
Probably something to do with having a non-existant version of FCP
Of the 5.0 series, 5.0.4 was the last.
What do you really have?
Seriously though, what video format are you using, what is your Easy Setup and Sequence Setting?
Where is the source material located on your computer?
Maybe you are looking for
-
Having strange issues with kbmap and utc/localtime
Hello, I've been using Archlinux for a month or so, never had any problems until now. 1. Setting the keymap doesn't stick. At first I had the German keymap selected in System-Preferences-Keyboard, and at reboot it would switch back to the standard US
-
My computer asked to what I want the ipod to do. Now it only looks for videos and photos, which it does not find. I can't sync my podcasts or music to the device. Not sure how to fix it. It is an ipod touch.
-
CC 2014 update extraction error on Mac
When attempting to update to CC 2014 on Mac OS 10.9.3, I'm repeatedly met with "Update Failed: Unable to extract the downloaded files. Press Retry to download again. (U44M1I210)." Strange enough, Adobe Media Encoder and Adobe After Effects updated to
-
Prompt for filename - not happening
I am running Windows 7 & AA8. Every time I print to PDF the file is automatically saved to "My Documents" with the default file name. On my previous machine (Windows XP) I was prompted for the filename and save location. I cannot find the setting to
-
Nano 2nd. Gen. on PC AND MAC
I have the Mac at home and have to work on a PC for work, can the 2nd gen nano run on both at the same time? I know I can format the nano to work for a PC, but will I have to format it again to work at home on the mac and reload everything? And is th