Multi devlepers to work through remote desktop on mac power?

Hello.
is it possible 2~3 devlepers to develop the iPhone application through remote desktop on a mac power?
if it is possible, please let me know the way.
thanks

Hi,
A connection was forcibly closed by a peer. This normally results from a loss of the connection on the remote socket due to a timeout or a restart. On a datastream socket, the
connection was reset. This reset could be generated locally by the network system when it detects a connection failure, or it might be received from the remote host (in TCP terms, the remote host sent an RST packet). This error is also possible on a datagram
socket; for instance, this error could result if your application sends a UDP datagram to a host, which rejects it by responding with an ICMP Port Unreachable.
Please check the following:
1. Ping the remote host you were connected to. If it does respond, this problem might have been a transient one (so you can reconnect now), or the server application you were
connected to might have terminated (so you might not be able to connect again).
2. Type tracert at the command prompt to determine the path to the host you were connected to. This won't reveal too much unless you know the router addresses at the remote end,
but it might help to identify if the problem is somewhere along the way.
3. Check if there is any related error log in the server side.
Thanks.
Jeremy Wu
TechNet Community Support

Similar Messages

2~3 devlepers to work through remote desktop on a mac pro?

Hello.
is it possible 2~3 devlepers to develop the iPhone application through remote desktop on a mac pro?
if it is possible, please let me know the way.
thanks

It's ok, found this
http://lists.apple.com/archives/macnetworkprog/2008/Feb/msg00070.html

HP Laserjet 1020 not working through remote desktop

I have a hp laserjet 1020 that I am vpn and remote desktop to a computer at work. I am suupose to be able to print from remote desktop to my local printer (the hp laserjet 1020) using the microsoft terminal Easy Print. The printer is showing up in the printer list, but when I try to print I get an error of Printer not ready. The printer is working fine on the local machine, just not through the remote desktop. I have install the printer drivers on the machine that I am remoting into , just to make sure. Is there anything else I can try. I am not finding any firewalls on either end blocking it?

After many months of frustration and 7 1/2 hours with Microsoft advanced prof support I've finally pinned down this printer and a slew of others. This problem as far as I have come across deals exclusively with HP printers. In simple terms: the drivers are flawed. This 1022 is a prime example. It prints locally and via TCP/IP just fine. I have about 7 other printers and dummy printers in my printer folder. Enter a remote desktop session and ALL of them populate except the 1022. This shows that the hooks and RDT finders are locating your printers and installing them properly as remote printers. All except the 1022.
Log out of your RDT session: goto the local 1022 setup and change the printer driver to a PCL driver. I used a 1200 PCL driver. Now log back into your RDT server and hockus pocus! there is your printer. Totally un-usable because the driver will not run this printer. Caveat: each time I did this XP crashed (I couldn't get to the properties TAB anymore -- I had to un-install the 1022 and then re-install it with at least 1 reboot in the process)
Moving on we go to the HP OfficeJet/LajerJet2840. Same thing. It won't pass through as remote printer in RDT. Go local. Set the printer driver to AppleLaserWriter8500 and boom. (same logout, change, back in steps) and your LJ2840 shows up and works.
While I will have to wait until tomorrow I am betting that this will fix the exact same problem with the HP Officejet 8500A all in one with the exact same problem.
Hey HP? Whats with the drivers??
Another work around if you have a static enough environment is to install your local printer that will not show up under RDT on the server, and then point the port to your fixed IP on your router, and passthru port 9100 to your locally installed printer that is failing. You can now be on RDT and chooses the network printer that is printing to the TCP address of your home (or office) router.

Allow log on through Remote Desktop Services Group Policy for Domain Controllers

Hello,
We want to allow our Helpdesk Operators to be able to connect to Domain Controllers with the Remote Desktop Services. This is by default not allowed but according to many sites, it should be able to configure by using a Group Policy.
We made a new Group Policy with the setting 'Allow log on through Remote Desktop Services' and 'Allow log on locally' (as an extra for testing) and applied Security Filtering to only use it for a specific Security Group. Our test user is a member of this
security group and should be able to access the Domain Controllers now. However this isn't working.
The error message we receive upon trying to connect:
The connection was denied because the user account is not authorized for remote login.
For troubleshooting, we also applied the Security Group for that setting in the Default Domain Controllers Policy but that doesn't seem to work either. We want to avoid customization on our Default Domain Controllers Policy but this was just a test case
for solving our problem.
What should we do to solve our problem?
I hope to hear from you soon.
Thanks in advance.

Hi, I just found out what the problem was. This site helped me alot:
http://blogs.technet.com/b/askperf/archive/2011/09/09/allow-logon-through-terminal-services-group-policy-and-remote-desktop-users-group.aspx
In my case, I had the group added to the Allow Logon Through Remote Desktop Services but was not added to the Builtin\Remote Desktop Users group. After knowing this I made some changes to our situation and are now using the builtin\Remote Desktop Users group
rather than a new self made Security Group. I also added the Remote Desktop Users to the Allow Logon Through Remote Desktop Service in the Default Domain Controllers Policy as this is not done by default. By default only the Domain Administrators are able
to logon through remote desktop services.
You do not need the 'Log on Locally' permission within the Group Policies.
In short:
Add the desired users/groups to the 'Builtin\Remote Desktop Users' security group.
Add the 'Builtin\Remote Desktop Users' security group to the 'Allow Logon Through Remote Desktop Services' within the 'Default Domain Controllers Policy'.
Thank you anyway for the fast reply.
Have a nice day!

How to enable users to access windows 2012 through remote desktop client on windows XP SP3

Hi I have just installed Windows Server 2012 and trying to give access to the users. The users are on windows XP Pro SP3 remote desktop client (Shell and control version 6.1.7600 with Remote Desktop Protocol 7.0 support).
I have enabled the windows server 2012 remote desktop users through "control panel -> systems and security -> Remote access" for the users. When I try to connect to the windows server as administrator, it is getting connected.
But when I try to connect as other users I get the following message.
"To sign in remotely, you need the right to sign in through Remote Desktop Services. By default members of the Administrators group have this right. If the group you're in does not have the right, or if the right has been removed from the Administrators
group, you need to be granted the right manually."
Is there any other setting to be done to eanble the Remote Desktop for the users.

Hi I have just installed Windows Server 2012 and trying to give access to the users. The users are on windows XP Pro SP3 remote desktop client (Shell and control version 6.1.7600 with Remote Desktop Protocol 7.0 support).
I have enabled the windows server 2012 remote desktop users through "control panel -> systems and security -> Remote access" for the users. When I try to connect to the windows server as administrator, it is getting connected.
But when I try to connect as other users I get the following message.
"To sign in remotely, you need the right to sign in through Remote Desktop Services. By default members of the Administrators group have this right. If the group you're in does not have the right, or if the right has been removed from the Administrators
group, you need to be granted the right manually."
Is there any other setting to be done to eanble the Remote Desktop for the users.
Have you tried adding those users to the "Remote Desktop Users" group? It's in Active Directory Users and Computers and it's a Built-In group. Might want to give that a try ...
- JJ

Sign-in through remote Desktop Services

To sign in remotely you need the right to sign through remote Desktop Services. By Defaults members of the administrators
Group have this right, if the group you are in doesnot have this right or if the righthas been removed from the
administrators group you need to be granted this right manually

Actually, the user needs to be member of "Remote Desktop Users" group to have this right, is not necessary to do this editing the user rights.
Jesús Peñaranda| MCP,MCT,MCTS,MCITP,MCSA,MCSE

MS Remote Desktop for Mac (v8.0.9 - 8.0.12): issue with "Session (ID #) remote control failed."

Hello,
I'm a SysAdmin for a small-med business in CO. We use a cluster of 3 RDS servers that are load-balanced with round-robin DNS and an RD Gateway. When I remote in from a PC, all works as expected. However, when I remote in from my MacPro (my main machine at home)
and try to remote control a user's session, I get this error:
Note the ID number is unique to the user's RDP session, so will vary each time.
This is 100% a bug in the "Microsoft Remote Desktop for Mac" program; I am positive of it at this point.
Does anyone from MS actually monitor these threads at all, or am I wasting my time? Thanks...

Hi,
As this happens with him specific from MRD MAC check whether he is taking RDP with IP address or hostname. Also try to uncheck the Option "Bypass RD Gateway for local address" under RDSH configuration and verify the result.
Also for more detail he can collect log from MAC side by following path.
Microsoft Remote Desktop>About Microsoft Remote Desktop>Send log via email
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Microsoft Remote Desktop for Mac and Win 2000 Server

Hello guys,
Could you please confirm that the latest version 8.0.15 is compatible with WIN 2000 Server connections? If not, could you please advise which version of Microsoft Remote Desktop for Mac is the match in order to connect to a WIN 2000 server.
Thank you in advance,
Bogdan

Hello Bogdan
WIN 2000 is supported. See a complete list of supported Windows SKUs here:
https://technet.microsoft.com/en-us/library/dn473006.aspx
Go to the AppStore and download Microsoft Remote Desktop.

Remote desktop for mac decryption using standard RDP Security mechanisms failed code 4498

Remote desktop for mac decryption using standard RDP Security mechanisms failed code 4498
i see this error when accessing an email server and it freezes the screen. This is happening every 2 minutes or so. any idea what is happening?

Hi,
Would you please provide us the log file after the issue occurs for further research.
Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email -> Post the log here.
Thanks.
Jeremy Wu
TechNet Community Support

Can't Print In App through Remote Desktop

Some users are stating that they are unable to print through a certain application when they are connected to an RDP server. When they try to print, this log comes up and the application crashes:
“Print driver host for 32bit applications has stopped working”
Problem Event Name:                          APPCRASH
Application Name:                             splwow64.exe
Application Version:                           6.1.7601.17777
Application Timestamp:                     4f35fbfe
Fault Module Name:                          mxdwdrv.dll
Fault Module Version:                        0.3.7601.17514
Fault Module Timestamp:                  4ce7c883
Exception Code:                                  c0000005
Exception Offset:                                000000000004e891
OS Version:
6.1.7601.2.1.0.16.7
Locale ID:
1033
Additional Information 1:                  0f86
Additional Information 2:                  0f86ddcc0aa605af31ef1b7f5abedf57
Additional Information 3:                  539e
Additional Information 4:                  539e0f43d86d39f144fdb012e341ed8d
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi,
Are they able to print from other applications while connected via Remote Desktop to the same server?
Are you using RD Easy Print driver for your redirected printers? If yes it may be that this specific application is incompatible with the RD Easy Print printer driver for some reason. One possible workaround may be to Disable Use RD Easy
Print printer driver first group policy setting and then install a matching printer driver on the server for each client printer.
-TP

Time machine is invisible but working via remote desktop - magic

Hello,
Time Machine is backing up properly an external firewire-disk of the server and the internal drive. If I run time machine on the server and restore the external volume - or internal volumes - time machine works but stays invisible. The finder window moves and resizes, the screen seems to be frozen - but it´s time machine invisibly running and I cannot see the stars and the space nor the buttons. But I can click them - I can abort time machine and get back to the finder. I also could try to find the place to click to scroll through time and change the windows´ content. I think I could also restore a file successfully but I did not try. But I cannot see time machine. It worked before I updated to 10.5.3 I think. It´s not the screen resolution in Apple Remote Desktop. And I cannot test the Macmini with a screen because it has no screen - it only is accessable via Remote desktop. It seems to me that the remote desktop client on the server does not send screen data of time machine.
What can I do?
Thank you.

Hello,
I made some more tests. I plugged a Screen adaptor for the TV at the mac mini to have a screen attached. The resolution in remote desktop was PAL and very small but time machine was working and it showed up well.
The result is that time machine needs a monitor to run properly or is it Remote Desktop that needs a monitor? The macmini is brand new and leopard server is 10.5.4.
Are there some ideas to solve this issue.
Thank you.
Best regards

Kinect application doesn't work over remote desktop but it works over TeamViewer

I have a use case where I need to use Kinect attached to a remote computer.
I tried to run an app on the remote computer via RDP but It turns out that it's not possible.
FPS drops to 0 (I get no data), for few seconds (LEDs on kinect device disappear) and then after few seconds kinect restarts to work for next few seconds (I can see LEDs on the device again). After few seconds that history repeats over and over (LEDs disappear,
I get no data from device....).
It's reproducible with all types of applications (WPF, DirectX, WinRT). I use RDP between two laptops with Windows 8.1.
However, everything is ok when I connect to the remote computer using TeamViewer.
Do you have any solution to that? If needed I'll be happy to provide you with more info on that problem.

See known issues and troubleshooting guide on remote desktop:
https://msdn.microsoft.com/en-us/library/dn758677.aspx
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk
You must disable audio remoting to ensure the audio data is running through Kinect runtime on the host machine.
Carmine Sirignano - MSFT

Hp laser jet 1102 printer dosen't work on remote desktop

i have a problem on printer HP laserjet 1102 on printing on remote desktop .
my printer connected to my computer and work ok but when i open anther computer remote it appear on it but not printing
if this printer dosen't support this option what is the model you advice me
many thanks for you

Try to run the print and scan doctor and check the results.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03275041
Does it gives you an error message when you try to print from the remote desktop?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Cut/Paste not working in Microsoft Remote Desktop for Mac

Sirs,
I am using Microsoft Remote Desktop V8.05 build 24428 on a Mac under the latest Mavericks OS, and I find that Cut and Paste are not working. When I paste on Remote Desktop Windows always pastes the last thing cut/copied under the Windows remote session,
rather than whatever I just cut/copied in another Mac window.
I am well aware that the keystrokes are different, and I tried to follow the instructions on another question which indicated that I should select the console session checkbox on Remote Desktop's 'Connection' configuration window. However Remote
Desktop no longer seems to have that option ... the topmost line now shows 'Admin Console' and checking it did not help with cut/paste.
I hope you can tell me how to get this working as cut/paste is a great convenience.
Thanks

Hi,
Clipboard redirection is not supported in current versions of Microsoft Remote Desktop. However, I will help to submit this as customer wish to the product team.
Thanks for your understanding.
Jeremy Wu
TechNet Community Support

Files creating through remote desktop is not updating in office computer

Hi,
we are currently using windows 2008 standard server for terminal service. colleagues are allowed to work through rdp. Recently one of my colleague said, when he is accessing the terminal server through remote, the files, folders and whatever he creates in
his home computer is not updating in office computer. what ever he creates, he is attaching them through email and come back to office and working.
can anyone please help to resolve this problem.? if you need more details I will update it.

we are currently using windows 2008 standard server for terminal service. colleagues are allowed to work through rdp. Recently one of my colleague said, when he is accessing the terminal server through remote, the files, folders and whatever he creates
in his home computer is not updating in office computer. what ever he creates, he is attaching them through email and come back to office and working.when he uses his home PC and logs on via Terminal Server it isn't showing the changes he made when he is in
the office.Terminal Server isn't syncing between logons.

Multi devlepers to work through remote desktop on mac power?

Similar Messages

Maybe you are looking for