Multi display options imac

I take it from the configuration of the new imacs that the option to have a second display running on my imac has disappeared, is there a work around for this?

I'm using a brand new hdmi cable (works fine with my pc!) and a belkin thunderbolt adapter.
Please don't insult me by assuming I didn't follow the instructions-- which include using the tabs that don't appear!!!
Yes, I connected the tv as instructed. Unfortunately the problem is that the tv doesn't recognize the macbook pro and, yes, I did try both of the solutions -- plugging in the connection before powering up the computer, and putting it to sleep and then making the connections. I usually try any and all suggestions before posting a request for help.
As I stated above, the cable works fine with my acer laptop. The only difference is that I need the adapter for my macbook pro - and purchased one from Belkin. It fits perfectly and the connections are secure and tight. I cannot choose the detect display, since it is not there. I cannot choose the arrangements tab, since it is not there, either.

Similar Messages

Multi display options for MBP using USB - Diamond BVU195 vs Sewell Minideck

I have narrowed my search for a multidisplay option for my MBP down to 2 devices;
Diamond BVU195
http://www.diamondmm.com/BVU195.php
http://www.amazon.com/Diamond-BVU195-Display-Adapter-included/dp/B002GHBW4S
and
Sewell Mindeck
http://sewelldirect.com/Sewell-Minideck-USB-to-DVI-Display-Adapter.asp
Has anyone had a chance to check out both of these?
There is no easy comparison, any opinions? thanks!

The obvious drawback of USB video adapters like these is that they tie up USB ports you may need for other purposes. If you intend to connect one or more such adapters to a USB hub instead of directly to the computer, be sure to use a hub that has its own AC power supply, and check with the adapter's manufacturer to make sure it has been tested with hubs and found to work that way.
The less obvious disadvantage of USB video adapters is slowness. If you don't use your multiple displays for gaming or other high-speed, demanding video applications, you may not be disappointed. If you do, you probably will be.

How can I operate multi displays on my Imac 21.5 quad core 2.5 and have each display function independently?

how can I operate multi displays on my Imac 21.5 quad core 2.5 using Lion and have each display function independently?

Below are some converters/adapters to look at. If these look like they may work:
USB 2.0 to HDMI Audio Video 1080P Adapter for Windows and Macbook
Matrox DualHead2Go D2G-A2D-IF (or look here)
These should allow you to run multiple displays in extended display mode. Note that these use HDMI as an output so you would need some additional adapter to conver HDMI to whatever your displays require. Of course these suggestions are all academic if such an adapter doesn't exist.
Update:
I just reread your last post and I am confused. Is it only your TV that you are trying to run in extended display mode? I thought you wanted more than two displays. If only the TV it should just work if you are not using mirrored displays. Your Displays Arrangement tab should show both your main screen (one with the little whith menu bar) and the TV. Set the proper resolution and refresh rate for the TV using it's Displays preference window. That is all you need to basically do (ignoring overscan/underscan problems).
Note, if you are using Lion then I have heard that when using full screen mode in Lion additional screens show nothing.

Using Boxes or Compact display option in Messages

Is there a way to return to the Boxes display option in Messages under Mavericks? I was never a fan of the Balloons, which appears to be the only display option now.

HI,
Open a Finder window.
Go to the View Menu and chose View Options
In here chose to display the Modified column.
Now use the Go Menu and hold down the ALT key and select the Library that appears.
Now navigate to the Preferences folder
Find the com.apple.ichat.plist item and highlight it.
In a view that display the columns such as Cover Flow check the date (and possibly time) that the files was last Modified.
Now open Messages.
If the setting in Mesaages > Preferences > Viewing have Changed again remake them to what you want.
Does the Modified column show the current time that you do this ?
If it does not then you may not own the file or have Permission to write to it.
with the file still highlighted use the CMD and i keys together (Get Info)
In the panel that opens scroll to the bottom.
Your shortname should be lists with Read and Write permissions.
Also if you highlight your name and then use the cogwheel type icon it should have, in greyed out text as if already done, "Make yourShortname (me) the Owner"
If you have Read and Write Permissions and the "Make" item is greyed out then you Own the file and have the correct permissions.
9:08 pm Monday; November 11, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Rich text box used in Infopath Form not displaying option to get images from Computer

Hello,
We have used "Rich text box" in Infopath Form which is not displaying option to get images from Computer.
Options available are : From Address, From SharePoint
But if we Rich text box in list, then it works fine with "From Computer" option.
can you please help me out to get this option.
Thanks in advance.
REgards,
Jayashri

Hi,
From your description, there is no “From Computer” option to get images with rich text box in InfoPath form.
Per my knowledge, by design there are “From Address” and “From SharePoint” options without “From Computer” option in rich text box in InfoPath form. As a workaround, you can develop a custom InfoPath Rich Text box to do it.
About developing a custom InfoPath control, I suggest you create a new thread on the forum “Visual Studio Tools for Office”, more experts will assist you with InfoPath development.
Visual Studio Tools for Office:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
Thanks,
Dean Wang

Need a JavaScript to enable/view Multi-line option for Text fields.

Hello All,
I need a JavaScript to enable/view Multi-line option for all the Text fields in PDF Form.
Assume that I have a PDF form of Fields from F1 to F100 and it contains 25 Checkboxes, 25 Combo Box and 50 Text Fields. Now i need a javascript for which i need to enable Multiline for only Text Fields. So Is there any JS for which i can enable the Multiline option for only Text fields and not for ComboBox or Checkbox.

Hi timo,
Thanks for your help. iam trying to use the iteraor approch to do this. but i don't know how to fetch the data entered in the form that was built by the iterator. can you please tell me .
thanks

Calendar display options

How can I change the display options for iCal on an iPad Mini? I hate to always having to scroll in weekly view and would like to see the whole day without scrolling.

angelwoman,
Apple has not made that a feature of the iOS Calendar App.
You may want to consider providing Apple - iPad - Feedback.

Can I get my laptop to connect via HDMI to mini display with iMac midi2011

I want to use as display my iMac( 27" midi 2011), connecting it with laptop HDMI port

http://support.apple.com/kb/HT3924#4

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device"

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

ITunes 7.0.1.8 Freezes Windows when Cover Browser display option selected.

When I select the Cover Browser display option for Music Library the entire operating system freezes within 3 seconds after the button is selected. After rebooting and deleting all music and selecting the option the freeze did not occur. I reimported a CD and tried again and the freeze occured again. ITunes works fine otherwise.
Compaq Presario 2100 Windows XP Pro
Compaq Presario 2100 Windows XP Pro
Compaq Presario 2100 Windows XP Pro

I setup a new user on the computer. The problem does not happen under new user.

Document type wise PO with display & optional purchasing group.

Dear All,
we have six document type from NB1 to NB6 every document type has separate no ranges, & having three field selection as Me21n, fof, NBF,
in Spro MM Define screen layout at document level, in that we assign document type NB5 & attach field selection FOF in that purcahsing group is optional.
same other dovcument types we assign field selection Me21n & we assign purchasing group is Display option.
our requirement is that when i select documenyt type NB5, purchasing group will optional not in display.
But system shows display & we cant do PO.
Please guide me or any other config.
Thanks
Shital

Hi,
System is giving first preference to Field Selection Key ME21N, so you have to reverse the condition.
Maintain ME21N as optional and assign document type NB5 to it and
For other dovcument types Create another Field Selection Key with purchasing group as Display option and
assign that field selection key for purchasing group is Display option.
Regards

Document Display Options from portlet

How do I gain access to the user setting for the "Document Display Options" from a portlet? I want my portlet to honor this setting when creating links for the user to click on such that they open in a new window or in the main browser window as specified by this setting.
This option is set on the Display Options page of the My Account editor.
thanx!

Instead of using
<f:selectItem> use
<f:selectItems>.
Pass list to this componenet. is this your question?
Message was edited by:
KrishnaS

NO-DISPLAY option for Radio buttons

Hi All,
I want to hide the 2 radio buttons on the selection screen using the NO-DISPLAY option. when i worked with that its giving an error like 'no-display and radio button group can be specified together'.
my question was is it possible to use NO-DISPLAY option with radio buttons?
Thanks
Kumar.

See this sample code
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-h01.
*Radio button for Process PO invoice
PARAMETERS : rb_po RADIOBUTTON GROUP inv USER-COMMAND rad.
" PO Invoice
*Radio button for FI Invoice
PARAMETERS : rb_fi RADIOBUTTON GROUP inv.
" FI Invoice
*Radio button for Process PO & FI Invoice
PARAMETERS : rb_pofi RADIOBUTTON GROUP inv.
" PO & FI Invoice
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
 s_bukrs FOR rbkp-bukrs, "Company Code
 s_ekorg FOR ekko-ekorg NO INTERVALS MODIF ID md2,
 "Purchasing Org.
 s_ekgrp FOR ekko-ekgrp NO INTERVALS MODIF ID md2,
 "Purchasing Group
 s_werks FOR rseg-werks NO INTERVALS MODIF ID md2,
 "Plant
 s_lifnr FOR rbkp-lifnr NO INTERVALS,
 "Vendor
 s_matkl FOR ekpo-matkl NO INTERVALS
 MODIF ID md1,
 "Material Group
 s_belnr FOR rbkp-belnr NO INTERVALS,
 "Invoice Number
 s_ebeln FOR rseg-ebeln NO INTERVALS MODIF ID md2,
 "Purchasing Document No
 s_gjahr FOR rbkp-gjahr NO INTERVALS,
 "Fiscal year
 s_budat FOR rbkp-budat NO INTERVALS,
 "Posting date
 s_blart FOR bkpf-blart NO INTERVALS,
 " Document Type
 s_bldat FOR bkpf-bldat NO INTERVALS,
 " Invoice Date
 s_usnam FOR rbkp-usnam NO INTERVALS.
"User
*Report type
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for User Report
PARAMETERS : rb_user RADIOBUTTON GROUP za DEFAULT 'X' USER-COMMAND rad MODIF ID md2."User report
SELECTION-SCREEN COMMENT 3(20) text-003 FOR FIELD rb_user MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for Managing Report
PARAMETERS : rb_man RADIOBUTTON GROUP za
 MODIF ID md2.
"Management Report
SELECTION-SCREEN COMMENT 3(20) text-004 FOR FIELD rb_man
 MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN OUTPUT.
* Checking Radiobuttons and modifing Material Group field .
PERFORM f13000_check_radio.
FORM f13000_check_radio.
* When the FI button is selected hide the fields under group md1 and MD2
LOOP AT SCREEN.
 IF screen-group1 = 'MD2'
 OR screen-group1 = 'MD1'.
 IF rb_fi = c_x
 OR rb_pofi = c_x.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
* If the user output radiobutton is checked then make the screen
* input of Material Group off
 LOOP AT SCREEN.
 IF screen-group1 = 'MD1'.
 IF rb_user = 'X'.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
IF rb_user = 'X'.
* When display for material group is off
* then refresh the select option for material
* group
 REFRESH s_matkl.
ENDIF.
ENDFORM. " f13000_check_radio
hope this helps.

ERROR ITMS-9000: "Unable to parse apple display options file: com.apple.ibooks.display-options.xml" at Book (MZItmspBookPackage)

Hi, I'm En32, now trying to publish my first iBooks (epub).
The package I created is always rejected to deliver with following error.
Does anyone who can provide me a solution ?
=== error ===
Package Summary:
1 package(s) were not uploaded because they had problems:
 /Users/En32/Music/iTunes Producer/Playlists/10000448204.itmsp - Error Messages:
 Apple's web service operation was not successful
 Unable to authenticate the package: 10000448204.itmsp
 ERROR ITMS-9000: "Unable to parse apple display options file: com.apple.ibooks.display-options.xml" at Book (MZItmspBookPackage)
===
$ cat META-INF/com.apple.ibooks.display-options.xml
<?xml version=”1.0″ encoding=”UTF-8″?>
<display_options>
<platform name=”*”>
<option name=”fixed-layout”>true</option>
</platform>
</display_options>
===
Actually, I'd like to use fixed layout so I use com.apple.ibooks.display-options.xml.
This ePub file looks good because I can open it with my iPad - iBooks, however iTunes publisher always rejects this.
Any solutions ?

I was getting that error when I used OSX's default compress feature. I found a little utility called ePub Zip and used it to compress (zip) my ePubs and that did the trick. They then passed the validation. I got it here:
http://www.mobileread.com/forums/showthread.php?t=55681

Display Options in Acrobat X

Hi,
I'm looking to find the Display Option tab in Acrobat PDF Maker X but can't find it, specifically I want to be able to set Document Open Options. In Acrobat 5, there was a Display Option tab which allowed you to set Bookmarks and Page using a radio button and the Open Magnification from a drop down.
Are these options in Acrobat PDF Maker X?
Any information is appreciated.
Thanks

Hi,
Thanks for the reply. I was hoping that you could specify these options before you generate the PDF, you could do this in Acrobat PDF Maker 5.0
Date: Wed, 20 Apr 2011 13:34:37 -0600
From: [email protected]
To: [email protected]
Subject: Display Options in Acrobat X
You can set this options in Acrobat X. Look at the properties of the document.
>

Multi display options imac

Similar Messages

Maybe you are looking for