Multi language dvd navigation

I am building a multi language dvd in Encore for the first time as it seems like it could be quicker than the more complex programmes used previously but I have some questions about the navigation.
To conserve space, I have only created one series of chapter menus that will be accessed from each different language menu. The thing is, when I press the HOME button on e.g. menu three of the chapter menus after looking at menu 2, I want it to go back to the menu of the specific language menu I had navigated from. I thought about using the override function, but that would only work for the button directly linked from the the menu and I don't want the user to have to go back to the first chapter menu to then go back their main menu. Any suggestions?

A suggestion: Submit a
feature request
for access to GPRMs. :) A GPRM (General PaRaMeter) is a variable which can be set and evaluated. In this case you could have used it to check from which menu the user came and return to that menu.
Other than that the only solution I can think of is to create multiple versions of the chapter menus. If the menus aren't motion menus the extra DVD disc space required will be minimal, but it will be a lot of extra work.

Similar Messages

DSP3: Multi Language DVD Menus

Hi All,
here I am to tell about my doubt in the an International DVD authoring, trying to figure out the correct workflow procedures.
So I have 7 languages, 5 menus and 1 video with 7 subtitles stream.
In my case, I'd like to use the internal language menu layout that could be great,
but I think that can be used only with the internal DVD player language configuration.
I'd like to put a language selection menu at start-up, instead, how can I do?
The Apple manual is very light in this section...
Many Thanks an advance and best regards.
Paul

last time i had to make a multi language dvd i dropped the language in DVD SP and managed it with GPRM from the first language select menu.
Also tutorial here http://www.kenstone.net/fcphomepage/dvd_languagenattress.html, looks the same as my workflow.

Problems creating a multi language DVD

I'm creating a DVD which has multiple video files in 4 different languages. Some of the video content is the same, but as some of the videos also have on screen text that has to be in a specific language, I cannot just use the default language settings in DVDSP.
I've tried a couple of things:
Uploading duplicate versions of the video files that have on screen text, and then uploading multiple audio tracks to the files which share a common video asset. I then pointed the buttons of the relevant menu to the video asset and the correct language for that button. This was working great, but then I realised that I could only set a single end point on the video. As I have multiple languages, this meant that even if the correct audio played, at the end I could only send the user back to one menu, which wouldn't be in the right language. Have I missed anything obvious here? Is there a way of setting end points that relate to a specific audio track?
Secondly I tried using the DVD language settings to tag each audio track - but the problem here is that some of my video files are unique to a specific language, and this option relies on only having a single video asset, and multiple audio streams. Again, am I missing something obvious?
The only solution I can currently see it to upload all the video files as duplicates (therefore uploading the same video file 4 times) and crush the bit-rate right down. Unfortunately the quality loss is quite dramatic - but at the moment it's the only solution that I know will work.
Any advice or options that are worth pursuing would be really appreciated. If the duplicate video files is the only solution, any tips on the best codec or ways to maximise bit rate would be really appreciated.

Not sure if you text is in the footage itself or not. Sounds like a not? You may need to use something like stories to route the footage to the proper places. (If the clips are the same lengths there are other tricks to try.)
In this [link|http://dvdstepbystep.com/stories_details.php] there is information on using stories with different subtitles and audio tracks and [here|http://dvdstepbystep.com/audioset.php] is a general way to use scripts to track preferences.
Using those techniques you can send people back to where they came from. In other words in the second link it is audio on/audio off. But you can do the same thing and put languages in there, so based on the selection you can read it and send them back. Or if using stories, you can set the end jump for the story back to where to go.
Described a bit better in [this thread|http://discussions.apple.com/thread.jspa?messageID=3076884&#3076884]

Multi - language dvd on appl tv

Dear Group
do you know if it is possible to select differents languages on movies stored on apple TV?
Thanks

No it is not.

Creating a multi-language DVD

I need to create a DVD with two selectable audio tracks, one in English, the other in Japanese. I believe such a thing was possible with DVD Studio Pro...
I am wondering if this can be done within FC Pro X and if not, how can it be done?
Thanks in advance!

… from the hobbyists corner:
Maybe, you have iDVD on your hard-drive, or on some of your older installer disks.
Export your project in its two versions. (btw: FCPX' feature of 'Roles' is of great help doing so.... with one click, you not only change audio, but titles, …)
Add both versions into a new iDVD Project.
Apply a nice menu, change the two icons into e.g. a British and a Japanese flag.
=> it 'looks like' switchable version
Hurdle:
a disk fits max 2h material; so, your project shouldn't be beyond 60min (better: stay under that max)

Multi-language subtitled DVD

Hi
I am building a multi-language DVD which contains numerous dramas all subtitled into 8 different languages. The dvd has a language selection page linking to scripts for each language and then the first of two scene selection menus. This link gives a quick overview of the scripts I've currently used.
http://www.kenstone.net/fcphomepage/dvd_languagenattress.html
The problem I have is that the order of the buttons for each language needs to be alphabetical which means that a link which is on menu 1 for the English subtitle is on Menu 2 for the German subtitles. I can programme the DVD to take the user back to Menu 1 German as a default but not to menu 2.
My knowledge of scripting is quite simple but I have tried adding a script which resets the GPRM for the second menu when accessed from the first menu. I thought this would then set a differnt GPRM reference for the return to submenu script to read. However this failed to work in the simulator.
Any help or useful advice would be greatly appreciated.
Kind regards
Dan Creed

A suggestion: Submit a
feature request
for access to GPRMs. :) A GPRM (General PaRaMeter) is a variable which can be set and evaluated. In this case you could have used it to check from which menu the user came and return to that menu.
Other than that the only solution I can think of is to create multiple versions of the chapter menus. If the menus aren't motion menus the extra DVD disc space required will be minimal, but it will be a lot of extra work.

Multi-language navigation on portal

How can I create a multi-language navigation without a need to create same pages many times for different languages?

Hi guys,
I am facing a similar problem with a customer. They want to have the page titles in Group Space navigation in multi-language.
For example: Navigation in English: Home - Employees - Help. If language is changed to Spanish: Inicio - Empleados - Ayuda. These pages are created by final users inside a Group Space, so we would like to find a way to specify translations of the page title at creation.
I found Oracle guides where it is explained how to do page translations:
http://docs.oracle.com/cd/E15586_01/webcenter.1111/e12405/wcadm_languages.htm#CHDGAJHJ
However, it implies WLST command executions and we need another way, because it is going to be performed by users, not administrators. Therefore using WLST commands is not a choice.
Would you know how to achieve this?
Thanks in advance
Javier
Edited by: user643559 on 25-ene-2012 4:17

Multi-language narration tracks for DVD

Hello --
I am using Adobe Pre 7, and I have a project where I need to create narration tracks in two different languages. I want the user to be able to select the language track from the DVD menu. Is it possible, if so, how? If not, what are my options?
Thank you for any informations.
Mike

Mike,
This is easily done in Adobe Encore, but that program is only available as part of PrPro.
PrE does not allow for multi-language Tracks (or any multi-Audio Tracks, like DTS).
Now, Sony's DVD Architect is highly recommended as a full-featured authoring program, but I do not use it (I use Encore), so do not know if it can handle multi-Audio Tracks. Steve Grisetti, our trusted MOD here, has written the book on DVD Architect, so he will know if it will handle this.
I would strongly recommend accessing the various Audio Tracks via a Menu, though the user can use the Audio button on the remote, it is a nice touch to also give them a Menu.
Good luck,
Hunt

Production tips for multi language titles...Arabic plus others...

I am teaching a DVDSP course with a student who will produce multi language titles. Arabic is the primary with French, German, and English as the alternates.
I follow the scripting ideas to test for which language the users select but I have a question on the menu production process.
Is it this?
Set language on Mac to Arabaic-Author this menu set-likely 2-3 menus
Save work
Switch language set to German-Author the same menu sets
Save work
Ditto for French and English.
Switch back to Arabic and finish the project.
Or this?
Graphic buttons with 3 states each for German, French and English? Accept the issues with layered menus.
Happy Holidays!

Michael Mizen wrote:
Set language on Mac
Sorry Michael, but what exactly do you mean by that? And why would you need layered menus?
In my book there are three approaches to the task.
First: create 4 language folders in the project for Arabic, French, German and English. Create identical graphics and overlays for each menu set, except of course text which will be different for each language. Import them into DVD SP and change project language for each set to put menus in place. Make sure your VTSM does not go over 1 Gig. Author the DVD.
The only problem with this approach is the user settings on a DVD player. If the user never bothered to change from default English to anything else, then only English menus will be displayed.
Second: Create all your menus (in different VTSMs if you like, especially if content differs. It is not necessarily to do so). Create "Master" menu with language choices. Branch from it to language sets. Use "Display condition" in the advanced tab for tracks and menus for navigation tracking. Saves tons of redundant scripting.
Third: Script your menus for tracking and re-directing navigation to the correct language of user choice. The only way for Spec authoring environments such as Scenarist.
Needless to say the menus should be created outside of DVD SP
Good luck to you and your student, and happy Holidays.

I18N / Multi-language Content Support

Hi All,
I have a requirement where, content needs to be published in multi-language, e.g. same News in English and Italian version.
Process 1. When user login user must be able to view the content as per the profile language, e.g. same News in English and Portuguese version
Process2. Provide a dropdown on the page, when user selects the language manually respective language specific page should be displayed.
Also, Request for helpful link with respect to- trex users search by multiple language
Regards,
SK

Hi All,
I am trying to follow the document Provide Multi Language Content in Knowledge Management to Provide Multi Language Content in Knowledge Management to create a multi-language KM Nav iView.
I have created a new component KMWrapperIView and followed the steps provided, but presently i am getting error message as shown below.
--> I have added bc.util.public_api.jar that is required com.sapportals.wcm.util.uri.RID
Caused by: java.lang.NoClassDefFoundError: com.sapportals.wcm.util.uri.RID (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
at com.test.kmw.KMWrapper.doContent(KMWrapper.java:66)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
Caused by: java.lang.NullPointerException
at com.sapportals.wcm.util.uri.RID.getRID(RID.java:93)
at com.sapportals.wcm.util.uri.RID.<clinit>(RID.java:73)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
Where i am going wrong any idea??
Also should I customise SAP standard KM navigation IView component (km.appl.portal.portalcomp_api.jar).
Regards,
SK

Oracle 9i Support for multi language is not working.. Giving question mark

HI,
We have an application which uses oracle 9i as the database. Riight now we are supporting only english and there is a requirement to support multiple languages like korean, chineese and japaneese.
But we are planning to migrate one part of the application to support multi languages. Means it may affect around 10 tables but with huge data. Totally we have around 100 tables.
How to enable the database for supporting multiple langugages.?
Is there any way to enable only the few tables supporting multiple languages. Because if we change the database level parameters for supporting languages, we may need to migrate entire tables. this will be a huge task.
Even if want to set the parameters for supporting multiple languages.. how to set it. Is it possible set it in the existing database or do we need to re-create the table with these prameters.
I have read in some documentation, that we can create table columns with nVarchar2 for supporting multi languages. I have created it. but if i copy some other language characters into those columns, it is giving question mark.
Is it possible to do search using text in native langugage like chineese..
Could somebody guide me on the above clarificationa and what would be the best approach..
Thanks in advance
Jino
Regards,
Jino George
Ext: 6520

You should not use any more Oracle 9.0.1 but at least Oracle 9.2.0.8 to get some extended support if you really cannot upgrade to 10g.
I don't have any Oracle 9.x database available but I've run successfully following test with Oracle 10.2.0.1 in character mode under Linux:
oracle@pbell:~$ export NLS_LANG=AMERICAN_AMERICA.AL32UTF8
oracle@pbell:~$ sqlplus / @nls
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Aug 29 17:29:56 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> drop table t;
Table dropped.
SQL> select * from v$nls_parameters where parameter like '%SET%';
PARAMETER
VALUE
NLS_CHARACTERSET
WE8ISO8859P1
NLS_NCHAR_CHARACTERSET
AL16UTF16
SQL> create table t ( data nvarchar2(100));
Table created.
SQL> insert into t values(unistr('\76EE\7684\5730'));
1 row created.
SQL> select * from t;
DATA
目的地Try to make sure you have the right NLS_LANG setting on the client side (under Windows this is a registry setting).

Multi language web site

Multi language web site
What is the best way to have my web site switchable (initially from links on the main index.html page) between different languages?
Do I simply clone the English version (including all the sub-directories and structure) into a sub-directory and translate each page and put a link on the main index.html page to a translated copy of the index.html page in the German sub-directory
That would mean I effectively have two websites to maintain.
More when it is translated into more languages.
Currently all the English pages are made from a template (dwt file)
I assume this adds a level of complication to the design.
Or is there a better/easier way?
thanks

This is a website that the client did not continue with http://ncca.com.au/new/, hence it has not been finished.
In the top right hand corner are two flags, Dutch and English. By clicking on a flag, the language session variable is changed. This session variable is used througout the website to determine the content as in
if ($_SESSION['lang'] == 'en') {include("home_en.php");}
if ($_SESSION['lang'] == 'nl') {include("home_nl.php");}
If there are more languages it is better to use the select switch rather than an if statement.

Multi language AddOn

Multi language AddOn
I will like to know were can I find information on how to make a AddOn multi language available.
Best regards.
Edited by: Jose Villarreal on Apr 21, 2008 5:27 PM

You have to program this by hand. Now there is an event that let's the add-on know when the language has been change. That could be a start, but you have to program all the translation on your add-on, is not done automatically.
Regards,
WB

Multi-language support for user-specified text strings used in the forms

multi-language support for user-specified text strings used in the forms
Instead of creating multiple forms, 1 in each different language, for the same service, is there any workaround?

Hoan - is your question what are the considerations when creating multiligual catalogs? If so, I can tell you that at other clients I have seen them use a single catalog for one or two languages. For the two langugages, such as Spanish/English, you can create a single catalog with both of them. Once you get to more than two languages, the catalog would get unweildy and is therefore not suggested.

Need help in developing XML Publisher Report in Multi Language

Hi Tim,
We have requirement to develop XML Publisher report in Multi language.
I know we can upload multiple Templates, one for each language.
Can any one help me in knowing the process other than uploading multiple templates.
Any documents or setup process related to this will be of great help.
I appretiate your help.
Thanks & Regards,
Sahoo

Hi,
Lets say you have two smart styles with X and Y, and runtime based on the number of pages, if you would like to modify the style, then check any standard table or structue which holds and responsible for the holding the style value.
If you can trace that, based on the coding we can modify accordingly.
Regards,
Santhosh.

Multi language dvd navigation

Similar Messages

Maybe you are looking for