Multi Language Forms - Show and Hide

Hi
Within a form in apex has anybody used ajax/css to display fields based on a language selection?
For example be default it will just display English fields but if a user clicks on a Spanish button then both the English and Spanish fields are shown?
Not sure if this is feasible in such as dev platform such as apex?

Yes I have selected from the conditions menu 'Value of Item / Column in Expression 1 = Expression 2
But am unsure what needs to be entered in the expression 1 and expression 2 fields. The reason being is at the top of the form I have a radio button with two options under the label 'Bilingual' with 2 options Yes and No
If they select Yes then it will show the fields in both languages English and French (will I have to set the condition on each item on the page for the 2nd language) or if they select No it just shows the English fields.

Similar Messages

Multi-language Forms

Hello, I'll like to find out if I am able to create a multi-language form in Forms Central. i.e. English & Chinese or English & Arabic.
If so, what are the different languages that I can type in?

Hi,
You should be able to create a form with all European and CJK languages, but FormsCentral may have issues with Arabic or Hebrew and other complext writing systems.
Thanks,
Wenlan

Iframes show and hide

Hi All,
I have the Requirement like :
I have two iframes side by side in a page, and two buttons show and hide,
once i click hide button second iframe should disappear and first one should be increase in size to fit whole window. and once i click show first and second should be 50/50 in the page
for this i followed below steps
1) created page.
2) created two report region (No Template)
3) In one region source i called iframe like
TABLE>
<TR>
<td>
<IFRAME SRC="http://Localhost:7777/pls/apex/f?p=&APP_ID.:&P104_INTERFACE.:&SESSION." WIDTH=&P104_WIDTH. HEIGHT=540 scrolling="auto" frameborder="1"></IFRAME>
</td>
</tr>
</table>
4) in second region
TABLE>
<TR>
<td>
<IFRAME SRC="www.google.com ; HEIGHT=540 scrolling="auto" frameborder="1"></IFRAME>
</td>
</tr>
</table>
6)conditionally showing the region with the help of SHOW and HIDE BUTTON
7)and also on Show and hide button i am setting the value of P104_WIDTH . So the size will vary with conditional display?
NOW MY QUESTION IS:
once i click hide button THE CONTENTS(item VALUES) OF THE FIRST FRAME ARE REFRESHED, DUE THAT ALL ENTERED DATA WIL DISAPPEAR SO HOW TO AVOID IT , without refreshing the frist frame i need to set the P104_width value so it interm width will set in the iframe region??????
Thanks & Regards
Nagaraj B K

I had another idea that I am pursuing. I am looking into extending the current renderer CommandNavigationRenderer and will render another goLink just after the current goLink that will execute a close action. I was able to re-direct the rendering by added an override render-kit block in my current faces-config.xml file.
<render-kit>
<renderer>
<component-family>org.apache.myfaces.trinidad.Command</component-family>
<renderer-type>oracle.adf.rich.NavigationItem</renderer-type>
<renderer-class>com.riscs.ui.backing.jsp.components.ClosableCommandNavigationItemRenderer</renderer-class>
</renderer>
</render-kit>
If this works I am planning on extending the commandNavigationItem by creating a ClosableCommandNavigation tag and add a "closeAction" tag that will determine if a close item should render.
Preliminary work looks promising. I will update if I make progress...please let me know if I am crazy.
Thanks.

Show and hide columns.

I have a rather large JTable with a lot of columns that are updated once in a while.
Is there an easy way to show and hide columns, so that I don't have to keep track on which a shown and hide when I use setValueAt()...?

JTable does the conversion between the column indexes of the view and the model.
You should be able to add remove columns using addColumn and removeColumn methods. and in the TableColumn class you can specify the coulmn in the model that the TableColumn refers to.

Show and hide Lov icons and Date Picker image on conditional?

How to show and hide Lov icons and Date Picker image on conditional?

Why do you just want to make the icons conditional? Shouldn't the field also be conditional?
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/

Error in my show and hide button prg

Hello Frnds,
With this link tutorial iam doing now but error raised , and tried my best plz check the tutorial and solve my prb
Method ONACTIONSHOW_HIDE
*THIS IS CODE FOR SHOW AND HIDE THE INPUT FIED BUT GETTING ERROR IS
**set_attribute_property doesnot exit similar ly get_attribute_property and set attribute is there like that getting error for this code
. DATA lo_nd_radio_node1 TYPE REF TO if_wd_context_node.
DATA lo_el_radio_node1 TYPE REF TO if_wd_context_element.
DATA lw_index TYPE I.
DATA lo_el_radio_node1_1 TYPE ref to if_wd_context_element.
navigate from <CONTEXT> to <RADIO_NODE1> via lead selection
lo_nd_radio_node1 = wd_context->get_child_node( name = wd_this->wdctx_radio_node1 ).* call method get lead selection index to get index
CALL METHOD lo_nd_radio_node1->get_lead_selection_index
receiving
index = lw_index. lo_el_radio_node1_1 = wd_context->get_element( ). If lw_index = 1. * call method set attribute property and pass value as 'X' to show
call method lo_el_radio_node1_1->set_attribute_property
exporting
attribute_name = 'FIRST_NAME_1'
property = 1
value = 'X'.
call method set attribute property and pass value as 'X' to show
call method lo_el_radio_node1_1->set_attribute_property
exporting
attribute_name = 'LAST_NAME_1'
property = 1
value = 'X'. Else. call method set attribute property and pass value as SPACE to HIDE*
call method lo_el_radio_node1_1->set_attribute_property
exporting
attribute_name = 'FIRST_NAME_1'
property = 1
value = space.* call method set attribute property and pass value as SPACE to HIDE
call method lo_el_radio_node1_1->set_attribute_property
exporting
attribute_name = 'LAST_NAME_1'
property = 1
value = space. Endif

Hi Ananth,
I tried the same code from that tutorial,its working fine.
once again check the name of the nodes and the elements.
you can try another way also to show and hide input fields.
create one attibute of type WDY_BOOLEAN and bind this attribute to the visible property of the input fields.
for example
attibute name = 'visible ' : type = wdy_boolean :default value = X
onaction of the radio button place the following code.it really works
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_visible TYPE wd_this->element_context-visible.
DATA lo_nd_radio_node1   TYPE REF TO if_wd_context_node.
DATA lo_el_radio_node1   TYPE REF TO if_wd_context_element.
DATA lw_index            TYPE i.
DATA lo_el_radio_node1_1 TYPE REF TO if_wd_context_element.
lo_nd_radio_node1 = wd_context->get_child_node( name = wd_this->wdctx_radio_node1 ).
lo_el_context = wd_context->get_element( ).
CALL METHOD lo_nd_radio_node1->get_lead_selection_index
    RECEIVING
      index = lw_index.
lo_el_radio_node1_1 = wd_context->get_element( ).
IF lw_index = 1.
    lo_el_context->set_attribute(
name = `VISIBLE`
value = 'X' ).
ELSE.
    lo_el_context->set_attribute(
name = `VISIBLE`
value = ' ' ).
ENDIF.
Thanks,
krishna

SetVisible against show and hide

Hello, making some practises I have observed that setVisible method doesn't just makes visible or not, it affects me when I change location of components I have played with setVisible, but when I use deprecated methods hide and show I haven't that problem.
What else makes setVisible than make visible or not?

Hello, the way I see it, setVisible is just a nicer way of setting visibility than show() and hide(). Anyway, the way setVisible is implemented in the Component class is :
public void setVisible(boolean b) {
      show(b);
}So I don't believe you should be experiencing any difference between show() and setVisible(). As to the change in positions of components, you might find the actual implementation useful:
    public void show(boolean b) {
        if (b) {
            show();
        } else {
            hide();
    public void show() {
        if (!visible) {
            synchronized (getTreeLock()) {
                visible = true;
                ComponentPeer peer = this.peer;
                if (peer != null) {
                    peer.show();
                    createHierarchyEvents(HierarchyEvent.HIERARCHY_CHANGED,
                                          this, parent,
                                          HierarchyEvent.SHOWING_CHANGED,
                                          Toolkit.enabledOnToolkit(AWTEvent.HIERARCHY_EVENT_MASK));
                    if (peer instanceof LightweightPeer) {
                        repaint();
                    updateCursorImmediately();
                if (componentListener != null ||
                    (eventMask & AWTEvent.COMPONENT_EVENT_MASK) != 0 ||
                    Toolkit.enabledOnToolkit(AWTEvent.COMPONENT_EVENT_MASK)) {
                    ComponentEvent e = new ComponentEvent(this,
                                                          ComponentEvent.COMPONENT_SHOWN);
                    Toolkit.getEventQueue().postEvent(e);
            Container parent = this.parent;
            if (parent != null) {
                parent.invalidate();
    }I left out the hide() code, since it is quite similar. Anyway, if you are interested in this code you can always look it up - it's avaliable.
Hope this helped, laginimaineb.

Multi-Language Project Updates and Translations (RH11)

I have a several projects that are multi-language. One in particular is translated in 20 different languages. Based on RoboHelp's suggested method for creating projects in multi-languages, I created the topics first in English, then made a copy of each topic selecting the desired language in the properties. However, now when the software changes, I have to make the same changes 20 times and it's very time consuming. My translators don't have RoboHelp so I can't send them the English and their language file for comparison and have them make the changes. Does anyone have any suggestions on simplifying this process?
In addition, when I send the .html files to the translators, I ask them to use Notepad, WordPad, or some other HTML editor to retain the formatting, links, etc. If they use Word, I loose all this information and have to copy and paste their text which is also time consuming. Has anyone had success with files translated in Word? What application is recommended for translating .html files?

They take your English content, translate it into whatever languages you want and save the originals. Then the next time you give them the English content, they compare it with the original on file & only concentrate on what changes have been made, thus saving all the expense of translating the entire set over again. TRADOS is one of the big names out there – see http://www.sdl.com/products/sdl-trados-studio/ for their explanation of “translation memory”

Show and Hide Actions Not Working

I'm working on a project that involves showing and hiding objects. I inserted a button and in the Action block for the object, I selected 'Show', then selected the object I wanted to be shown on click. When I preview that screen in the project and select the button to show the object, it shows the object, but then advances the project to the next screen. The only way I've found to combat this apparent flaw is to use an advanced action for what should be a really simple interaction. Also, I have the timing set for all objects on the screen in question to Display for the rest of the slide. Is anyone else experiencing this issue?

Have a look at: Why choose Standard over Simple action? - Captivate blog
As Rick points out, Captivate has always worked that way. And since you are talking about Hide/Show, very often you'll want to hide a group before showing one object. If you are using Captivate 7/8 I recommend to create a shared action for that purpose that you can use over and over again in that project and in other projects.
Dare to Share - part 1 - Captivate blog
Reuse Shared Actions in other Projects - Captivate 7 vs. 8 - Captivate blog

JFileChooser show and hide

I am using a jFileChooser to save a file in a selected location and then I use a check if the file exist to prompt an overwrite option dialog box. I do this like so....
fileChooser.showSaveDialog(jPanel1);
File file = new File(fileChooser.getCurrentDirectory()+"/"+fileChooser.getName(fileChooser.getSelectedFile()) + ".jpg");
filename = file.getPath();
if (new File(filename).exists()) {
        int n = JOptionPane.showConfirmDialog(this,
        "Do you want to overwrite?", "File Overwrite",
        JOptionPane.YES_NO_CANCEL_OPTION, JOptionPane.QUESTION_MESSAGE);
        if (n == JOptionPane.NO_OPTION)
                showme(flag);
}The question I have is, Upon entering a filename and location in the file chooser and clicking the save button the filechooser goes away, if that file already exist the JOptionPane shows and a choice can be made, I want the JOptionPane to prompt over top of the file chooser. Right now when clicking save the fileChooser goes away, then an overwrite option can be made, if it is no the savedialog reappears, Does anyone know how to keep the filechooser shown until a file save of a non-existing file is chosen or a no overwrite option i sshown.
BASICALLY: Does anyone know how to keep the filechooser component shown even when a optionPane component is shown? I don't want it to show and reshow.

Why do you just want to make the icons conditional? Shouldn't the field also be conditional?
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/

Xcode-Show and Hide windows with checkbox?

I am making an applescript/cocoa application in Xcode 4.6. I in my Main Window, I have two windows that are hidden at launch ("Preferances", and "Advanced") and one window ("Simple") that is visible at launch. In the preferances window, I have a checkbox. I would like that box, when checked to display the "Simple" window, and Hide the "Advanced" window, and even when closed and relaunched, will remain how the preferances are, and not have to check the box everytime on startup of the app. Anyone know how to do this? Thanks!

Ok something isn't quit right
I in my Main Window, I have two windows that are hidden at launch ("Preferances", and "Advanced") and one window ("Simple") that is visible at launch. In the preferances window, I have a checkbox. I would like that box, when checked to display the "Simple" window, and Hide the "Advanced" window,
What do you mean by in the main window are two windows? Also if the checkbox is in the preferences window and that is hidden at launch how do you get to it to check/uncheck it?
This checkbox basically toggles between the two windows? selected it displays the 'simple' window, when unchecked it displays the "Advanced" window?
This script
script AppDelegate
property parent : class "NSObject"
    property ppw : missing value
    property isShowing : 0
          on applicationWillFinishLaunching_(aNotification)
-- Insert code here to initialize your application before any files are opened
          end applicationWillFinishLaunching_
          on applicationShouldTerminate_(sender)
-- Insert code here to do any housekeeping before your application quits
                    return current application's NSTerminateNow
          end applicationShouldTerminate_
    on displayButton_(sender)
        if (isShowing = 0) then
            ppw's orderFront_(sender)
            set isShowing to 1
        else
            ppw's orderOut_(sender)
            set isShowing to 0
        end
    end
end script
will toggle a second window from a button on the firsst window.
This is what the nib file looks like
ppw is attached to the panel.
This should get you started. Post back if you have more questions.

How to make a button show AND hide a field?

In an interactive form (with Adobe Acrobat X Pro), how can I purpose one button to:
1.) Show a field when clicked the first time
2.) Hide a field when clicked a second time
I seem to only be able to make a button do one or the other, but not both with the same button. Maybe an easier way to say this is I want to be able to have one button turn a field "on" and "off".
Any help would be GREATLY appreciated. Thanks!

Use this code:
var f = this.getField("OtherFieldName");
if (f.display==display.visible) f.display = display.hidden;
else f.display=display.visible;

DYNAMICALLY SHOW AND HIDE OF PORTLETS

I am developing some application using Portal application(forms,reports,menu).
I have 3 portlets in a Page. Each portet has a Form,Report.
The requirement is I wanted to hide and show a Portlet
dynamically based on session parameter.
For example : I have a form on top of the page and report output below it,
that report contains a link for every row.
By clicking on the link a stored procedure is invoeked
that gets the rowid as IN parameter. This stored
procedure should do a database operation and set some
session parameters based on the rowid it retrieved and
redirect to the same page.
Something like:
l_sess_store := portal30.wwsto_api_session.load_session(
p_domain => 'PORTAL30',
p_sub_domain => 'TEST'
l_sess_store.set_attribute(
p_name => 'l_rowid',
p_value => l_rowid
l_sess_store.save_session;
portal30.wwv_redirect.url('http://host:port/servlet/page?_pageid=123&_dad=portal&_schema=PORTAL')
Now this page has to show an additional portlet when the
session parameter set by the stored procedure contains a
certain value.
How can I achieve this?
Thanks, tobi

Hi
Question 1: Go to edit the tab and use the conditional display settings.
Question 2: Go to the page template that you are using and edit Standard Tab Attributes.
Cheers
Ben

Show and hide events in a dashboard widget

These two functions never seem to fire off. If the widget is hidden the hide function doesnt run and the show function only runs on the insitial load.
My problem here is that i am running a setinterval to perform a task every 30 seconds while visible and when the dashboard closes and the widget is hidden the timer still runs. I'd like it to stop and only start again when the widget shows, any ideas?

I would use visible and includeInLayout properties
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Dynamically show and hide detail columns according to master column value

i want to create a page where 2 level master detail.
that is main master region with search option for query (query region)
2nd detail with table
and 3rd detail. (1-2-3)
Here in 3rd detail region, some fields should be shown and some fields hide according to the value of one filed in 2nd detail table(for the current selected row).
please advice
or
please point me to any similar posts

Zam,
show/hide is only beneficial if its optioanl for user to hide or show the fields at your detail region.If it is not , you will have to use PPR and transient VO approach.
--Mukul

Multi Language Forms - Show and Hide

Similar Messages

Maybe you are looking for