Multi language screen

I opened my iBook like any other day and it did not start up. I turned it on but got nothing so tried again and again. It finally started up, went to the home screen but as I started safari I got the multi language "please restart your computer screen" I restarted it and again it would not start up (battery was full). I managed to get it back up and it would be ok for about 15 minutes but then came up with the same screen. I did a hardware test which came up with everything ok. I find it only does this if I bump it or if it's plugged in. I'm crossing my fingers that it doesn't bring the screen up while I'm backing up onto my external HD. does anyone know what might have caused this?
Thanks

Kayjay07:
Welcome to Apple Discussions.
Your computer is having a kernel panic. This is usually hardware based, although it could be software related. In your case, since it seems to respond to being moved, I suspect there is something loose that makes intermittent connection, most likely the Airport Extreme card. I suggest that you remove the card, clean the contacts with a soft lint-free cloth and replace it being sure that it is securely seated.
Good luck.
cornelius

Similar Messages

Multi-language screen of death

My G4 ibook started randomly crashing a few months ago. It would display the multi-lingual screen "you must restart your computer" and I would have to shut down and restart.
I have since changed OS to 10.4. I customed installed archiving the old OS and preserving permissions.
It still crashed randomly. I then tried the following:
1. Repair disk--using the Tiger book CD--no problems detected
2. Repair permissions--errors were corrected
3. Cache cleaning--I used Cocktail and thoroughly cleaned the cache (system/user/internet options)
My sytem is still crashing several times a day. Is this screen I'm getting represent a "kernel panic"? When I used to get those it would say "kernel panic". Should I run a hardware test? What else can I do?
Thanks!
Melinda

Welcome to Apple Discussions!
Those are indeed kernel panics, and are not normal. I've written a FAQ on kernel panics, and those really should be resolved before upgrading any further. They indicate some driver that is installed is probably not on speaking terms, or there is a hardware issue. Running the hardware test may tell you of the cause of the kernel panic, but sometimes that hardware issue may also not be detectable by the test. However, if the test detects an error, ask Apple to fix it. A kernel panic is not a normal condition, and it should never recur. If it does, it indicates something needs to be diagnosed as soon as possible. Here's my FAQ:
http://www.macmaps.com/kernelpanic.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

Screen dims and multi-language "restart" message appears

Currently, every time Safari is used, the entire screen dims and a multi-language (German, Chinese, etc.) message comes on the screen saying that I must physically power down my machine and restart. No error message is given, nor are any other options allowed, as the keyboard and mouse are rendered useless.
I have rebooted the machine several times, including powering down the cable modem, but the problem persists.
This problem has occurred in the past, but seemed to clear itself, only to reoccur starting yesterday (23 Sep 05). I can't shake the feeling that this problem is more in the OS X arena than in Safari's, but testing does not seem to bear out my feelings - all other installed applications appear to run properly and this phenomenon of screen dimming with forced power down and restart does not occur with other applications.
Any thoughts? Thanks! Bob Meyer.

I suggest the following:
Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
If you continue to have the problem, then reinstall the OS X Mavericks 10.9.2 Update (Combo) updater.

Multi Language Support Setup

Hi Gurus,
We have currently upgraded from 11i to R12.1.2 and we have decided to USE MLS & NLS(Multi Language Support) for the very 1st time.We have 4 Languages (American,Spanish,French,Portuguese) so when we query for data in tl tables(apterms_tl,ra_terms_tl,fnd_responsibility_tl) we get four records for a single term_id because we are using 4 languages so we need to keep a language join. What I am doing is
Select * from ap_terms_tl where agent_id = 5 and language = USERENV('LANG'); which returns only one row with US as the language. Here is a sceneario where I am struck I want to see data in a different language like Spanish or french or Portuguese so how can i achieve that. what i am trying to do is
ALTER SESSION SET NLS_LANGUAGE = 'BRAZILIAN PORTUGUESE'; and then querying for
Select * from ap_terms_tl where agent_id = 5 and language = USERENV('LANG'); i get data in Portuguese. How can we achieve this from user level perspective. like when we register a Canadian USER and he wants to see American and vice -verse.
here are the profile options for NLS & MLS
PROFILE_NAME USER_NAME
ICX_DATE_FORMAT_MASK ICX: Date format mask
ICX_DATE_LANGUAGE ICX: Date language
ICX_LANGUAGE ICX: Language
ICX_NLS_SORT ICX: NLS Sort
ICX_NUMERIC_CHARACTERS ICX: Numeric characters
ICX_TERRITORY ICX: Territory
I tried setting up these profile Options but didn't work. I am struck Here(like where to set these profile options to make the MLS work).Let me explain the sceneriao
Here is what we are trying to achieve When a user from Canada login into Oracle Applications and runs a request set or a concurrent Program he has to see the output in Canadian Language Responsibility this should be done dynamically(changing the Language). You have give me a scenario like changing the preferences and setting the session languages can we dot it dynamically like as soon as the user logs in from Canada his session Language should be set to Canada Language.
I am just waiting for some help from the gurus.
Help would be highly appreciated.
Thanks & Regards
Krishna
Edited by: user12156300 on Mar 11, 2010 9:29 AM

Hi Hussien,
I able to see the languages in the tables and when i alter the session and I able to see the data in that particular Language.Even i log-in into oracle applications and click on Preferences and change the session Language Other than US i can see the screens in a different Language.Is there anything we can't do dynamically instead of user signing into Oracle Applications and change his session Language.
Like when the user logs-in from Canada then he can automatically see his country language.
Thanks & Regards
Krishna.

Multi language Support - JDeveloper 11.1.1.0.0

Hello everyone,
We have an application developed using Rich ADF Faces(JDeveloper 11.1.1.0.0). We have to do a POC in order to support multi language in the input text labels for the JSF Screens.
Any ideas please?

My idea: read the (mental note to self: remember to say "fine" and not the other word) [url http://download.oracle.com/docs/cd/E17904_01/web.1111/b31973/af_global.htm#CHDGCAFI]fine documentation

Multi Language support for lost password management in OAM

We are trying to implement lost password management with multi-language support. We have updated lpm_changepwd.xsl for UI changes. Some of the text on the password change screen come for the lpm_changepwd.xsl. How can we have the text on the password change screen in multiple language?
Thanks.
Vinay

Was able to do it by adding new files to the shared folder and updating the style in the lang folder to point to the new files.

Multi Language Support in OBI

Hi all
I need to implement Multi Language Support in OBI Reporting(For Chinese Clients)
We are using Oracle Apps as Source with Single Sign-On, so there will be only one logon screen for all, and it will first redirect me to Apps and from there it will connect me to OBI and there wont be any Login Screen for Answers and I cant select the Language option.
I know the Externalizing Presentation Tables and Loading data through CSV file, but how to set the Language option from Apps Screen.
Plz dont advice "Implementing Multi Language Support in Normal OBI"
I need to implement it in Single SignOn
ThanX in Adv.
Anand

Hi Anand,
You should create an initialization block, in which you check the language of the logged in user. The user who logs into Oracle BI EE can be found in the fnd_user table. Then you should be able to verify the language of the logged in user.
Good Luck,
Daan Bakboord

Regarding Multi Language support for Z-Report

Hi Expert,
I have requirement of supporting multi language for Z- report.
My existing system default client language is EN. Now I have to use Z-Report in other language like DE (German), ES (Spanish) ._But when I tried to execute Z-report in Other Language.In Parameter screen it shows system fields (those I have defined in parameters fields variable) not a text field name._
If anybody have experience pl. explode how to resolve the problem.
thanks in advance and for solution I will give u full points.
Regards

Hi,
U have to maintain translations for the text elements and selection texts u created while creating the report. do like this.
Open ur report text elements in change mode.
Menu->goto->Translation* Here give the source language as EN and target language as DE(German) and press enter. It will show all selection screen elements and text elements. Here give the translated text in corrosponding language if have the one else u can simply give the english text itself. After filling all the elements just press save. Now u will get a success/status message
100% matches on all texts. U have to repeat this process for all the languages u want.
After this log in to ur other languages(other than EN) and check. What ever u maintained there those will appear here.
For standard reports/user exits u have to use transaction SE63 for maintaining translations.
Thanks,
Vinod.

Multi Language Issues!!

i've a big problem with my site!
i'm using muse and i love it so much!but i need some Help!
I can see that too many people have the same issues and they didn't find a solution.
So, if i am just one more. Anyone Just Tell me! i've problems with multi-language. My website is in English, A friend of mine is Spanish, he tried to open my website in Google Chrome and because his language is Spanish, Chrome show a small tip bar says "This Page is in English, Translate page to Spanish". when he perform that option, my site looks so strange. the text, shapes and spaces. Everything changes. the whole design changes.
How can i fix that !! is there is any help i can get on that matter !! Please !
www.disagno.com

"Maps API usage has been disabled" !!!!!!
i want to show what i have about Google Translation. i will send some print screens now!
this is my website in the Original case, without any translation!
After Google Translation!
you can see the different in the Green Circle!! it's not a circle anymore!
Note that i already changed some spacing for the text in my Muse Site. So, i can get the same shapes in place with the Spanish Text.
I Hope you can understand my problem!
Multi-regional and multilingual sites.
Sanjit_Das
Amy_Wong

Does BEX Report supports Multi Languages????

Dear Gurus,
Does Bex report supports Multi Languages???? I mean, I had developed a report for the client and client wants the report for their different locations globally. Is there any way in BI, so that we can provide the same report into Spanish, French....
Thanks in advace....

Sure. It is supported.
Just a point to be mentioned here.
You have to maintain the laguage desired installed on ABAP side first.
You can chck this on RZ10 - Parameter: zcsa/installed_languages.
Ex: zcsa/installed_languages - ED
it means English and Deutsch
Well, open Query Designer. On Logon screen, select the language desired, like Spanish - ES.
After that, go to each keyfigure and characteristic of the query and on Properties -Description Field (Descripción on spanish),
put the spanish name of the object.
Save the query and test on both languages (original and spanish or french)...
This will solve your issue.
Best regards,
Edward John
SDN Forum moderator.

Oracle 9i Support for multi language is not working.. Giving question mark

HI,
We have an application which uses oracle 9i as the database. Riight now we are supporting only english and there is a requirement to support multiple languages like korean, chineese and japaneese.
But we are planning to migrate one part of the application to support multi languages. Means it may affect around 10 tables but with huge data. Totally we have around 100 tables.
How to enable the database for supporting multiple langugages.?
Is there any way to enable only the few tables supporting multiple languages. Because if we change the database level parameters for supporting languages, we may need to migrate entire tables. this will be a huge task.
Even if want to set the parameters for supporting multiple languages.. how to set it. Is it possible set it in the existing database or do we need to re-create the table with these prameters.
I have read in some documentation, that we can create table columns with nVarchar2 for supporting multi languages. I have created it. but if i copy some other language characters into those columns, it is giving question mark.
Is it possible to do search using text in native langugage like chineese..
Could somebody guide me on the above clarificationa and what would be the best approach..
Thanks in advance
Jino
Regards,
Jino George
Ext: 6520

You should not use any more Oracle 9.0.1 but at least Oracle 9.2.0.8 to get some extended support if you really cannot upgrade to 10g.
I don't have any Oracle 9.x database available but I've run successfully following test with Oracle 10.2.0.1 in character mode under Linux:
oracle@pbell:~$ export NLS_LANG=AMERICAN_AMERICA.AL32UTF8
oracle@pbell:~$ sqlplus / @nls
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Aug 29 17:29:56 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> drop table t;
Table dropped.
SQL> select * from v$nls_parameters where parameter like '%SET%';
PARAMETER
VALUE
NLS_CHARACTERSET
WE8ISO8859P1
NLS_NCHAR_CHARACTERSET
AL16UTF16
SQL> create table t ( data nvarchar2(100));
Table created.
SQL> insert into t values(unistr('\76EE\7684\5730'));
1 row created.
SQL> select * from t;
DATA
目的地Try to make sure you have the right NLS_LANG setting on the client side (under Windows this is a registry setting).

Multi language web site

Multi language web site
What is the best way to have my web site switchable (initially from links on the main index.html page) between different languages?
Do I simply clone the English version (including all the sub-directories and structure) into a sub-directory and translate each page and put a link on the main index.html page to a translated copy of the index.html page in the German sub-directory
That would mean I effectively have two websites to maintain.
More when it is translated into more languages.
Currently all the English pages are made from a template (dwt file)
I assume this adds a level of complication to the design.
Or is there a better/easier way?
thanks

This is a website that the client did not continue with http://ncca.com.au/new/, hence it has not been finished.
In the top right hand corner are two flags, Dutch and English. By clicking on a flag, the language session variable is changed. This session variable is used througout the website to determine the content as in
if ($_SESSION['lang'] == 'en') {include("home_en.php");}
if ($_SESSION['lang'] == 'nl') {include("home_nl.php");}
If there are more languages it is better to use the select switch rather than an if statement.

Multi language AddOn

Multi language AddOn
I will like to know were can I find information on how to make a AddOn multi language available.
Best regards.
Edited by: Jose Villarreal on Apr 21, 2008 5:27 PM

You have to program this by hand. Now there is an event that let's the add-on know when the language has been change. That could be a start, but you have to program all the translation on your add-on, is not done automatically.
Regards,
WB

Multi touch screen fix

Multi touch screen needs calibrated on iPhone 4S. Anyone know how this is done.

No such thing as calibrating your display. If restoring your phone as a NEW device (not using backup at all) doesn't resolve your issue, you'll need to take your phone in to Apple for evaluation.

Multi-language support for user-specified text strings used in the forms

multi-language support for user-specified text strings used in the forms
Instead of creating multiple forms, 1 in each different language, for the same service, is there any workaround?

Hoan - is your question what are the considerations when creating multiligual catalogs? If so, I can tell you that at other clients I have seen them use a single catalog for one or two languages. For the two langugages, such as Spanish/English, you can create a single catalog with both of them. Once you get to more than two languages, the catalog would get unweildy and is therefore not suggested.

Multi language screen

Similar Messages

Maybe you are looking for