Multi level mapping in PI. eg: A = B= C w/o BPM

Hi All,
I want to do multi level mapping withou BPM i.e Structure A to structure B mapping and Structure B to Structure C i.e
A=>B=> C. Let me know proc in PI 7.0/7.1 without BPM. Is this possible through Interface mapping or Interface determination ?
Thanks,
Jogula Ramesh

Hi Ramesh,
Finally you want Strcuture C as the out from PI System,?? if Yes then develop two mappings(A>B,B>C)and add it in Interface mapping,we can add any number of mappings in Interface mappings.
The source message to Interface mapping is A and receiver would be C.
This is will work.
Regards,
Raj

Similar Messages

At wit's end. How to map 'List1' to a Word multi-level list style?

My RoboHelp 7 project uses the style 'List1' for numbered
lists. I want to map this to a multi-level list style in Word 2008.
When I get to the Print Document Appearance dialog
(generating Printed Documentation), the Word style does not appear.
I assume this is because it's not considered to be a 'paragraph'
type (rather, it's a multi-level list type).
*How* do I map this???
In a very small nutshell... my R7 topics were done using
List1. If a step had sub-steps, it was indented one level (which
started the indented numbering back at '1')":
for example:
1. This is a step.
>>>> 1. This is a substep.
>>>> 2. This is also a substep.
>>>> 3. Yet another substep.
2. This is also a step.
Was there a way to do the lists in R7 so that the substeps
would have been labeled 'a', 'b', 'c'?
Is there a way to map the method I used (or some other
method) to a Word multi-level list? (1/a/i/ etc.)
For some reason, I'm getting absolutely lost in the R7 help,
and my google-fu is completely awry.
*Any* help would be greatly appreciated.
Thanks.

Best wait for Word 2008 to be launched then. :-)
Assuming you meant Word 2007, this an old issue. Take a look
at the Print articles on my site. There must be a way but I gave up
and haven't really tried again.
Numbers with bulleted indents might be easier.

Error in content level mapping

Hi Gurus,
I designed star schema in that when as a standard practice (for making report performance faster) . I searched threads in forum and everything as defined i have done still I am getting errors.
1) I am setting content level agg. of fact for their based dimension then I am getting error in consistency check as
'[39008] Logical dimension table Dim_xyz has a source Dim_xyz that does not join to any fact source.'
, what i should do more for this ?
2) If i define content level mapping in dimensions for its same column like date for time dimension then i get error message as
'[nQSError: 14031] The content filter of a source for logical table: Dim_xyz references multiple dimensions.'
3) Also as we know fact table contains only measures and foreign keys of dimensions so why do i get error in consistency check as '[89001] The Physical Table '"Fact_xyz"' has no keys defined.'
I am fed of these stupid errors as why does not obi server understand that this is fact table. When I saw prebuilt rpd i did not find these types of error there.
Thanks for your instant reply,
Amol

Hi,
The scenario I am trying to test is a multi mapping scenario where I am trying to split one source message and create two target messages by using two different receiver interfaces, one for each message.
I am on PI 7.1 and when I test message mapping and operation mapping using the payload from SXMB_MONI, it is successful. Whereas when I test the scenario end to end I am getting the following error messages:
Operation Mapping
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Name
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Namespace
http://accenture.com/1:N_multi-mapping
Runtime error
Split mapping created no messages
Start tag ns0:Messages Add raw attribute xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge" Start tag ns0:Message1 Close tag ns0:Message1 Start tag ns0:Message2 Close tag ns0:Message2 Close tag ns0:Messages
Could someone please help
Cheers,
S

Multi level attribute form LDAP

multi level attribute form LDAP
I am trying to write an custom mapping to use to retrieve a value from a multialued field in LDAP (nsRole). Has anyone done this before?
Rigth now all my mappings are 1:1. However the goal is to get a 1 : M and parse thru it till i get the desied value (1:1)

Darwin Hammons - Assurant
2:44pm, May 17
Great conversation. I have a very similar question about the use of the custom JAVA mappings with the LDAP Login process. I want to include an additional (event) step in the login process. Does anyone have an example or experience with a custom Java Class mapping that can use an LDAP attribute (location) queriing the data to execute an event that populates an RequestCenter OU or Group if the person login location equal say " Argentina" ? Looking for a way to manage / build catalog entitlements during login. Suggestions ?
Great conversation. I have a very similar question about the use of the custom JAVA mappings with the LDAP Login process. I want to include an additional (event) step in the login process. Does anyone have an example or experience with a custom Java Class mapping that can use an LDAP attribute (location) queriing the data to execute an event that populates an RequestCenter OU or Group if the person login location equal say " Argentina" ? Looking for a way to manage / build catalog entitlements during login. Suggestions ?
Anthony Erickson
2:52pm, May 18
Hi Darwin,
We're about to embark on a piece of work with newScale which would be similar to this to support our Multilingual catalogue. I'll provide any updates I'm able.
Thanks,
Ant
Darwin Hammons - Assurant
3:25pm, May 18
Great, Thanks Anthony ! I hope our bringing up this topic will spark a bit of interest. The Custom Java Mapping / Directory integration is documented more with RC 9.1. It will be good to hear more about your project and use of Java mappings with LDAP Directories.

Error in Multi Message Mapping

Hi,
I am getting the following error in my multi message mapping scenario where I am trying to create 2 different output files from a single input file based on some condition. I tested the message mapping by using a test file and it works fine, but when I use the same file and test it end to end the scenario is failing with the following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>Split mapping created no messages</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Split mapping created no messages</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Is there something wrong with my configuration?
The trace has the following content.
Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="3" type="T">Document start</Trace>
<Trace level="3" type="T">Start tag [ns0:Messages]</Trace>
<Trace level="3" type="T">Add raw attribute [ xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"]</Trace>
<Trace level="3" type="T">Start tag [ns0:Message1]</Trace>
<Trace level="3" type="T">Close tag [ns0:Message1]</Trace>
<Trace level="3" type="T">Start tag [ns0:Message2]</Trace>
<Trace level="3" type="T">Close tag [ns0:Message2]</Trace>
<Trace level="3" type="T">Close tag [ns0:Messages]</Trace>
<Trace level="3" type="T">Document end</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_Employee1_MT_To_Employee1_MT_AND_Employee2_MT_MM_ completed. (executeStep() of com.sap.xi.tf._Employee1_MT_To_Employee1_MT_AND_Employee2_MT_MM_).</Trace>
<Trace level="3" type="T">Message Type 1 Number of Messages 0</Trace>
<Trace level="3" type="T">Message Type 2 Number of Messages 0</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>

Hi,
The scenario I am trying to test is a multi mapping scenario where I am trying to split one source message and create two target messages by using two different receiver interfaces, one for each message.
I am on PI 7.1 and when I test message mapping and operation mapping using the payload from SXMB_MONI, it is successful. Whereas when I test the scenario end to end I am getting the following error messages:
Operation Mapping
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Name
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Namespace
http://accenture.com/1:N_multi-mapping
Runtime error
Split mapping created no messages
Start tag ns0:Messages Add raw attribute xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge" Start tag ns0:Message1 Close tag ns0:Message1 Start tag ns0:Message2 Close tag ns0:Message2 Close tag ns0:Messages
Could someone please help
Cheers,
S

Query Regarding Multi-Message Mapping in Interface Mapping.

Hi All,
I've a query that can we use Multi-Message Mapping in Interface Mapping if:
One mapping structure is simple one-2-one mapping and
Second mapping is calling a stored procedure.
Please give me some links if the answer is YES.
Thanks in Advance.
Regards,
Sreedhar.
Edited by: Sreedhar Av on Oct 12, 2009 1:26 PM

Hi,
Your question not clear buddy..what i understood is..
If you want execute multiple message mappings in Interface mapping we can ,just add two mapping programs in interface mapping.first mapping program output is input to the second mapping program.
If first mapping program is very simple,if you want to execute stored procedure in second level mapping write used defned fun ction to conect to data base or create JDMC receiver communication channel ,cal the communictaion channel in udf.write stored procedure in UDF.
SEARCH for more info in sdn how to perform DBLOOKUPS.
regards,
Raj

FCC for Multi-level Hierarchy

Hi Friends,
Can someone please help me out with this.Below is my Sender Data Type which needs to be converted:
DT_TRAC_MESG
(Hierarchy 1)         TRAC_INFO
                  (Hierarchy 2)   TRAC00
                     (Hierarchy 2)GROUP1
                                (Hierarchy 3)TRAC05
                                (Hierarchy 3)GROUP2
                                             (Hierarchy 4)TRAC10
(Hierarchy 4)                                             GROUP3
                 (Hierarchy 5)                                         TRAC11
and my input data is as below :
XXXXXXXXX TRAC00 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (occurance 1)
XXXXXXXXXXXXXXXXXXTRAC05XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (occurance 1)
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXTRAC10XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXTRAC11XXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXTRAC11XXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXTRAC11XXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXTRAC10XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXTRAC11XXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXTRAC11XXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXTRAC10XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXTRAC11XXXXXXXXXXXXXXXXXXXXXXX
I know Std SAP XI doesnt support more than 3 hierarchies but we are using a JMS adapter and this support more than 3 hierarchies.So please help us in achieving this mutli hierarchy conversion.Please atleast provide me the procedure to convert a 3 level Hierarchy structure.
It would be of great help for me if someone can answer this and asap.
Thanks & Regards,
Pradeep.

Hi
follow this weblog
File Content Conversion for Multi Hierarchical Structure
or
you can use seeburger to use multi level hierarchy
SAP PI/XI : Content conversion using Generator mapping functionality of SeeBurger : Part 1.
SAP PI/XI : Content Conversion using Generator mapping functionality of SeeBurger : Part 2.
regards
sandeep
Edited by: sandeep sharma on Dec 15, 2008 10:45 AM

LightSwitch HTML multi-level tile navigation menu

I am working on a multi-level tile navigation system for the LS HTML client. The idea is to have tiles on the home screen that when tapped navigate to a lower-level screen with more tiles that eventually lead to browse screens with the actual LS data.
Here is what I have so far (simplified of course). Looking for suggestions on how to improve this. TIA!
Home navigation tiles (these tiles appear on the application Home Screen)
-Orders - tap goes to Orders Home screen with additional tiles.
-Customers - tap goes to Customers Home screen with additional tiles.
-Lookups - tap goes to Lookups Home screen with additional tiles.
Order Navigation Tiles (these tiles appear on the Order home screen)
-Orders (search/browse Orders)
-Returns (screen based on a modeled query of Orders)
-other tiles for screens based on modeled queries of Orders
Customer Navigation Tiles (these tiles appear on a Customers home screen)
-Customers (search/browse Customers)
-other tiles based on modeled queries of Customers
Lookup Navigation Tiles
- Each tile links to a browse screen for one of the lookup tables.
>>>>
(didn't create an image/icon for this yet)
>>> ItemTap leads to a browse screen for "Test Records".
To power this menu system, there is a database table MenuTiles.
MenuTiles:
Title
Description
ScreenId
MenuGroup choicelist
-HomeGroup
-OrderGroup
-CustomerGroup
ImageFileName (contains the name of the static image file for the tile)
I have three modelled queries to get the tiles associated with each group. The Home Screen gets its tiles from a modelled query selecting the tiles with MenuGroup == HomeGroup. The other screens work the same way respectively.
The Home screen has the following js. The other screens have similar methods.
myapp.Home.ImageFileName_render = function (element, contentItem) {
contentItem.dataBind("value", function (newValue) {
var newFileName = newValue;
if (newFileName !== null && newFileName !== undefined) {
element.innerHTML = "<image src='Content/Images/Tiles/" + newFileName + ".png'>";
myapp.Home.MenuTilesHomeGroup_ItemTap_execute = function (screen) {
var entity = screen.MenuTilesHomeGroup.selectedItem;
var modelItem = entity.details.properties["ScreenId"].value;
if (modelItem !== null && modelItem !== undefined) {
myapp.showScreen('Browse' + modelItem);
This all seems to work well. The databind on the ImageFileName keeps the images updated on the screen if they are added or changed. The ItemTap_execute function correctly navigates to a lower level navigation screen or a browse screen for the
appropriate entity collection.
The problem I have with it is it seems to rely on magic strings and that sort of thing. For example, if the ScreenId does not match the name of a screen it will error. If the ImageFileName does not match an image in the folder, it shows the default
placeholder. Is there a better way to do this?

Nice Job Hessc! I also like Dales tile menu that Dave mentioned.
For a look at another example, albeit not multi-level, see how
syncfusion does tiles in this demo:
Javascript
myapp.Home.ScreenContent_render = function (element, contentItem) {
TileCreation(element, contentItem);
$(".tile-li").on("click", function (args) {
var screen = args.currentTarget ? $(args.currentTarget).attr('data') : "";
myapp.showScreen(screen);
function TileCreation(element, contentItem) {
var SampleList = [
{ imgClass: "Editor", sampleName: "Editors", screenName: "BrowseEmployeeInfo" },
{ imgClass: "DatePicker", sampleName: "DatePicker", screenName: "DatePicker" },
{ imgClass: "DateTimePicker", sampleName: "DateTimePicker", screenName: "DateTimePicker" },
{ imgClass: "TimePicker", sampleName: "TimePicker", screenName: "TimePicker" },
{ imgClass: "Editor", sampleName: "TextBoxes", screenName: "TextBoxes" },
{ imgClass: "RichTextBox", sampleName: "RichTextEditor", screenName: "RichTextEditor" },
{ imgClass: "AutoComplete", sampleName: "AutoComplete", screenName: "AutoComplete" },
{ imgClass: "DropDownList", sampleName: "DropDownList", screenName: "DropDownList" },
{ imgClass: "Slider", sampleName: "Slider", screenName: "Slider" },
{ imgClass: "ProgressBar", sampleName: "ProgressBar", screenName: "ProgressBar" },
{ imgClass: "grid", sampleName: "Grid", screenName: "Grid" },
{ imgClass: "Chart", sampleName: "Chart", screenName: "Chart" },
{ imgClass: "CircularGauge", sampleName: "CircularGauge", screenName: "CircularGauge" },
{ imgClass: "LinearGauge", sampleName: "LinearGauge", screenName: "LinearGauge" },
{ imgClass: "DigitalGauge", sampleName: "DigitalGauge", screenName: "DigitalGauge" },
{ imgClass: "TreeMap", sampleName: "TreeMap", screenName: "TreeMapFlatCollection" },
{ imgClass: "Maps", sampleName: "Maps", screenName: "Maps" },
{ imgClass: "RangeNavigator", sampleName: "RangeNavigator", screenName: "RangeNavigator" },
{ imgClass: "BulletGraph", sampleName: "BulletGraph", screenName: "BulletGraph" },
{ imgClass: "ReportViewer", sampleName: "ReportViewer", screenName: "ReportViewer" }
var root = $('<ul class="tile-ul"></ul>'), content = "";
$(element).append(root);
$(SampleList).each(function (i, val) {
content = "<li class='tile-li' data='" + val.screenName + "'> " +
"<div><span class= 'innerList tile-img " + val.imgClass + "'>" + "</span>"
+ "<span class= 'innerList tile-txt'>" + val.sampleName + "</span></div>"
+ "</li>"
$(root).append(content);
// to remove screen display name in layout
$(".msls-label").remove();
CSS:
/*Sample Layout design CSS*/
ul.tile-ul {
list-style-type: none;
margin: 30px 0;
padding: 0;
li.tile-li {
float: left;
font-size: 16px;
height: 157px;
width: 157px;
li.charttile-li {
float: left;
font-size: 16px;
height: 157px;
width: 157px;
li.charttile-li span.tile-img {
border: 1px solid #606161;
display: block;
height: 100px;
margin: 0 auto;
width: 100px;
background- center;
background-repeat: no-repeat;
background-color: #282827;
.charttile-li > div {
text-align: center;
li.charttile-li span.tile-img:hover {
border: 1px solid #606161;
background-color: #474747;
li.charttile-li span.tile-img:active {
border: 1px solid #606161;
background-color: #191818;
li.charttile-li span.tile-img.Chart {
background-image: url("SampleImg/Chart.png");
li.gridtile-li {
float: left;
font-size: 16px;
height: 157px;
width: 157px;
li.gridtile-li span.tile-img {
border: 1px solid #606161;
display: block;
height: 100px;
margin: 0 auto;
width: 100px;
background- center;
background-repeat: no-repeat;
background-color: #282827;
.gridtile-li > div {
text-align: center;
li.gridtile-li span.tile-img:hover {
border: 1px solid #606161;
background-color: #474747;
li.gridtile-li span.tile-img:active {
border: 1px solid #606161;
background-color: #191818;
li.gridtile-li span.tile-img.grid {
background-image: url("SampleImg/grid.png");
.tile-li > div {
text-align: center;
li.tile-li span.tile-img {
border: 1px solid #606161;
display: block;
height: 100px;
margin: 0 auto;
width: 100px;
background- center;
background-repeat: no-repeat;
background-color: #282827;
li.tile-li span.tile-img:hover {
border: 1px solid #606161;
background-color: #474747;
li.tile-li span.tile-img:active {
border: 1px solid #606161;
background-color: #191818;
li.tile-li span.tile-img.Editor {
background-image: url("SampleImg/Editor.png");
li.tile-li span.tile-img.grid {
background-image: url("SampleImg/grid.png");
li.tile-li span.tile-img.Employee {
background-image: url("SampleImg/EmpManage.png");
li.tile-li span.tile-img.CircularGauge {
background-image: url("SampleImg/Radial Gauge.png");
li.tile-li span.tile-img.DigitalGauge {
background-image: url("SampleImg/Digital Gauge.png");
li.tile-li span.tile-img.LinearGauge {
background-image: url("SampleImg/Linear Gauge.png");
li.tile-li span.tile-img.Chart {
background-image: url("SampleImg/Chart.png");
li.tile-li span.tile-img.RangeNavigator {
background-image: url("SampleImg/RangeNavigator.png");
li.tile-li span.tile-img.BulletGraph {
background-image: url("SampleImg/BulletGraph.png");
li.tile-li span.tile-img.TreeMap {
background-image: url("SampleImg/TreeMap.png");
li.tile-li span.tile-img.Maps {
background-image: url("SampleImg/Maps.png");
li.tile-li span.tile-img.ReportViewer {
background-image: url("SampleImg/ReportViewer.png");
li.charttile-li span.tile-img.MultipleAxes {
background-image: url("SampleImg/MultipleAxes.png");
li.charttile-li span.tile-img.Chart3D {
background-image: url("SampleImg/Chart3D.png");
li.charttile-li span.tile-img.LiveChart{
background-image: url("SampleImg/LiveChart.png");
li.charttile-li span.tile-img.CombinationChart {
background-image: url("SampleImg/CombinationChart.png");
li.charttile-li span.tile-img.DrillDown {
background-image: url("SampleImg/DrillDown.png");
li.gridtile-li span.tile-img.FlatGrid {
background-image: url("SampleImg/FlatGrid.png");
li.gridtile-li span.tile-img.Exporting {
background-image: url("SampleImg/Exporting.png");
li.gridtile-li span.tile-img.Summary {
background-image: url("SampleImg/Summary.png");
li.gridtile-li span.tile-img.ColumnTemplate{
background-image: url("SampleImg/ColumnTemplate.png");
li.tile-li span.tile-img.DatePicker {
background-image: url("SampleImg/DatePicker.png");
li.tile-li span.tile-img.DateTimePicker {
background-image: url("SampleImg/DateTimePicker.png");
li.tile-li span.tile-img.TimePicker {
background-image: url("SampleImg/TimePicker.png");
li.tile-li span.tile-img.RichTextBox {
background-image: url("SampleImg/RichTextBox.png");
li.tile-li span.tile-img.AutoComplete {
background-image: url("SampleImg/AutoComplete.png");
li.tile-li span.tile-img.DropDownList {
background-image: url("SampleImg/DropDownList.png");
li.tile-li span.tile-img.Slider {
background-image: url("SampleImg/Slider.png");
li.tile-li span.tile-img.ProgressBar {
background-image: url("SampleImg/ProgressBar.png");
.e-handle.e-select.ui-link {
margin: 0 0 0 -16px !important;
width: 28px !important;
height:17px !important;
.msls-label {
margin-bottom: 8px;
.innerList.tile-txt {
display: block;
word-wrap: break-word;
font-family: 'Segoe UI';
font-size: 14px;
color: #cececd;
margin-top:5px;
.innerList.tile-txt:hover {
color: #bababa;
.innerList.tile-txt:active {
color: #eaeaea;
.msls-header .msls-header-area {
padding: 2px 25px;
.msls-title-container .msls-title{
padding-top:2px;
h1.msls-title .msls-text-container, .msls-control-header .msls-text-container {
letter-spacing: 1px;
white-space: pre-line;
.ui-body-a, .ui-overlay-a {
background: none repeat scroll 0 0 #111111 !important;
.msls-dialog-inner-frame.ui-body-a.msls-rows-layout {
background: none repeat scroll 0 0 #111111 !important;
.msls-footer.ui-footer.ui-bar-a {
background-color: black !important;
.msls-dialog-inner-frame {
border-color:#484848 !important ;
.ui-header-fixed, .ui-footer-fixed {
z-index:0;
.msls-content {
padding-top:8px;
#msls-id-app-loading {
border-top-width:1px;
.msls-label.msls-label-align-left {
padding-top:7px;
.msls-tabs-container.ui-corner-all.ui-controlgroup.ui-controlgroup-horizontal {
padding-top: 12px;
@media (min-width: 320px) and (max-width:470px) {
li.tile-li, li.gridtile-li, li.charttile-li{
height: 150px;
width: 140px;
.msls-header .ui-title {
color: #eee;
font-family: "Segoe UI";
font-size: 13px;
@media (min-width: 480px) {
li.tile-li, li.gridtile-li, li.charttile-li{
height: 150px;
width: 147px;
Some things to notice are CSS classes are used to assign images and since it renders straight <UL> in a custom control, it prevents rendering all the extra DOM elements that LS tile list has - might make some customizations of look & feel
easier.
HTH,
Josh

Can we use SNP PDS in Multi level ATP ?

Hi All,
We do CTM planning with existing SNP PDS In APO and now we want to explore to use the Multi level ATP functionality for GATP. I know, MATP can create the ATP trees if the stock is not available and these can be converted into PPDS order.
My question is, can we use SNP PDS for this purpose?
Thanks,
Abhilasha

Hi Abhilasha,
There is no such specific mention anywhere in the literature that you cannot use SNP PDS for MATP. The only downside to using SNP PDS is that SNP PDS are meant for mid to long term planning and the activities/operations in SNP PDS are usually not in detail i.e only important activities or bottle neck components are usually used which will not always facilitate detailed scheduling.
On the other hand MATP creates ATP tree structures by plan exlosion(which can be SNP/PDS) and saves the requirements groups(component requirements of header level) with dates/qts and source of supply. It uses PPDS component to convert these ATP tree structures into PPDS planned orders depending on the conversion horizon/requirements dates. It does that by reading the source of supply, requirements dates and quantities from ATP tree structure and by plan explosion.
When MATP planned orders are created you should no longer plan them with automatic planning run as that will cause re-explosion of the plan and might cause incorrect down stream requirements if you had had substitutions at component leve during MATP check. In planned orders, you have an option of changing the allowed sources of supply (in source of supply section). But for orders created by MATP, you will not be allowed to change the source of supply field from SNP PDS to PPDS PDS in the planned order because it will re-explode the plan. So you can decide for yourself if you can use SNP PDS as source of supply for PPDS planned orders.
Hope that answers your question.
Regards,
Mohan

How to create a multi-level configuration sales order?

Hi,
    My client use configurable material to sell computers. And the production mode is MTO. One sales order item correspond with a production order
    Now my client also sell array which consist of two computers, two storage, one UPS power etc. That means I must realize multi-level configuration. First, choose the computer type. Second, based on the choosed computer in first step, choose the cpu, disk and so on. And then based on the sales order item, there must be several production order related to the same sales order item.
    Now I have semi-finished product B1,B2--computer. Class type is 300. Many characteristics is allocated to the class. B type material has the BOM which consist of cpu,disk etc.
    Then I created the finished product A--array. Class type is 300. Allocated characteristics is the B1,B2. A has the BOM which consist of B1,B2 etc.
    When I create sales order, I can only config the first level,choose computers for A, can not choose cpu,disk for computers.
    So, how can I find a solution for this scenario?
    Thanks in advance.

Thanks, Waza
1. Does the Sales order BOM explode in the sales order?
No. Just one top item would be ok for my client.
2. Why do thy want this in the sales order? They can explode the BOM in the production order, do they then need pricing at the component level?
They do not need pricing at the component level. Exploding the BOM in the production order is acceptable. But how can I config the configurable material in components of production order?
I tried collective order, but the second level of configurable material can not generate production order. I just make use of special procurement 52 in MRP2 of top finished product. Is there something I missed?
Thanks again.

Multi Level Phantoms

Looking for guidance / lessons learned on phantoms. I have several assemblies that use multi level phantoms assemblies and the problem I am encountering is when the the BOMs all get pushed up to the top level, the shop order cannot be cut due to duplicates.
A very basic example is I have screw that goes into a plate. The plate is a phantom and used on two different sub assemblies. These sub assemblies are phantoms and report to the same top level assembly that I am building. When I attempt to cut a shop order, the screw that was all the way at the bottom appears twice on the top level BOM when the two phantom BOMs are pushed up and causes an errorpreventing me from moving forward.
I currently set my special procurement type 50 in MM03. I have heard that I could set it up on the individual BOMs, however I do not see this fixing the problem as the material and item number of the duplicate will remain the same regardless of how it was set up.
Any advice or inputs? Please let me know if you need more detail.
Thanks.

Hello
Can you please provide more details about the error? Is there an error message? Can you please provide the message ID, number and the description?
BR
Caetano

Multi level follow up material in BOM

Dear All,
Our client have a requirement for multi lvel follow up material in BOM.
for example
BOM for Finish Good made of A.
if material A is depleted then used material B
if material B is depleted then used material C
if A and B have stock used A(higher priority)
I tried to used follow up material in MRP4 and BOM but it can not be used for multi level like this case.
Is there any solution for this?
Best regards,
Fred

Hi anyway I tested the BOM master data like this
F/G 1 Master Box
|--- A 10 PCS Alt Group Z1 Priority 1 Usage 100% Strategy 2 (100% Check)
|--- B 10 PCS Alt Group Z1 Priority 2 Usage 100% Strategy 2 (100% Check)
|--- C 10 PCS Alt Group Z1 Priority 3 Usage 100% Strategy 2 (100% Check)
Stock A is depleted
Stock B enough
stock C enough
Expected result F/G only used B 10 PCS
Actual result is
F/G 1 Master Box
|-- A 10 PCS
|-- B 10 PCS
|-- C 10 PCS
Do ou have ides how should the percentage in BOm is maintain?
Best regards,
Fred

How to create multi level reports?

The report I have created contains 25 columns and is to wide. I would like to create a multi level report in the fashion of below:
Col 1 Col 2 Col 3
Row1 Row1 Row1
Row2 Row2 Row2
Col 5 Col 6 Col 7
Row1 Row1 Row1
Row2 Row2 Row2
I am assuming this needs to be done by modifying html in a template.
I have cut up a normal report to try and illistrate what I am thinking.
http://i71.photobucket.com/albums/i124/breinhar/multirow.jpg
I greatly appreciate the help. Thanks.

Hi,
OK - I've put together a horizontal scrolling report template for a Theme 12/Standard report: [http://apex.oracle.com/pls/otn/f?p=33642:198]
To create this, you need to:
1 - Through Shared Components, Templates - create a new Report Template based on a copy of the existing Standard report template.
2 - When you have your new template, edit it.
3 - In the template's "Before Rows" setting, replace what's there with the following:
<style type="text/css">
#table1 th {white-space: nowrap}
#table1 td {white-space: nowrap}
#table2 th {white-space: nowrap}
#table2 td {white-space: nowrap}
</style>
<table cellpadding="0" cellspacing="0" summary="" style="padding:0px; border-collapse:collapse;">#TOP_PAGINATION#
<tr><td>
<tr>
    <td style="vertical-align:top; background-color:#EFEFEF; padding:0px; border:1px solid darkgray;">
      <div id="d1" style="background-color:white; margin:0px; border:0px; padding:0px;">
      </div>
    </td>
    <td style="vertical-align:top; padding:0px; border:1px solid darkgray;">
      <div id="d2" style="overflow-X:scroll; margin:0px; border:0px; padding:0px; border-right:1px solid darkgray;">
<table cellpadding="0" border="0" cellspacing="0" summary="" class="t12Standard" id="table2">4 - In the template's "After Rows" setting, replace what's there with the following:
      </div>
    </td>
</tr>
</table><div class="t12bottom">#EXTERNAL_LINK##CSV_LINK#</div></td></tr>#PAGINATION#</table>
<script type="text/javascript">
var d1 = document.getElementById("d1");
var t2 = document.getElementById("table2");
var t1 = t2.cloneNode(false);
t1.style.width = "100%";
t1.id = "table1";
d1.appendChild(t1);
var t2Rows = t2.rows;
var k;
var r;
var c;
for (k = 0; k < t2Rows.length; k++)
r = document.createElement("TR");
t1.appendChild(r);
c = t2Rows[k].cells[0].cloneNode(true);
r.appendChild(c);
t2Rows[k].deleteCell(0);
d1.innerHTML += "";
</script>5 - On your report's Report Attributes, change the template used for the report from "Standard" to your new one
6 - Also on the report's Report Attributes, set "Enable Partial Page Refresh" to No - this is required as we need the javascript in the template to be run whenever pagination happens and Partial Page Refresh does not seem to allow us the means to trigger javascript
7 - Finally, on the report region's Region Footer, add in:
<style type="text/css">
#d1 {width:75px;}
#d2 {width:500px;}
</style>#d1 refers to the width of the frozen column and #d2 is the width of the rest of the report - you can adjust these figures as required.
The template contains two DIV tags - d1 and d2. Initially, d1 is empty and d2 contains the report. The javascript moves the first cell in each row from d2 to d1. The styles then add the scrolling functionality.
Andy

How to create multi-level style pulling in a .jpg image as a bullet?

From within RoboHelp 8 HTML, when creating/editing a 3-tier multi-level style, I want to use a .jpg image for the bullet(s). I can not find a way to point to the image while in Edit mode. My only choices are predefined bullets for the List Style.
When searching for an answer within the forum, I noticed mention of a Baggage folder in RoboHelp. I do not have a Baggage folder. I do have links to websites accessible from within the web-based Help file I've created beneath the URLs folder in the Project Manager.
Thank you for any help you can provide.

Hi there
I never really played much with adding images to the oddly formatted Multi-list styles.
The Project Manager has two views. Sounds like you are using the new "global" view. In that view you don't see a special area labeled Baggage Files. In this view the files are simply listed among the other content. If you change the view to Classic (I think it's the first icon on the left of the pod toolbar) you will then see the Baggage Files folder.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

"Multi-level error propagation carried out" in SCM 5.0

When I use the SNP PPM Generation With Lot Size Margin function in SCM 5.0, I got the following error:
Multi-level error propagation carried out
Message no. /SAPAPO/OM242
Could you please give me this help?
Thanks,
Lian

Hi,
Thank you for the information, but the problem is still there though I de-activated all user-exits...
I also saw the following error:
Invalid planning version
Message no. /SAPAPO/OM015
Thanks,
Lian

Multi level mapping in PI. eg: A = B= C w/o BPM

Similar Messages

Maybe you are looking for