Multi Mapping: Error in If Then condition

Hello Guru's,
My requirement is to populate multiple target objects based on the source field called location. For testing I have tried If Location = india then source objects will be mapped to MT_Tfile1 other wise it should be mapped to MT_Tfile2(while mapping i am concatenating Fname and Lanme to Name to MT_Tfile2) . See the below mapping screen for more details.
I am getting error when i try to do test with some input values.
Not able to figure out what could be the error. Can you pls suggest/help what is the issue here?
Thanks
Arun

Hi Bertoni,
I did the mapping for MT-Tfile2 as well. Pls see the below screens hot.
But with this straight mapping, MT_Tfile2 is not populated for the data entered which is not equal to India. It got worked when changed the context of the filed location to messages, see the below screen.
Can you pls explain the logic behind it? i tried to check with display queue but not able to figure out how it worked.
Thanks
Arun

Similar Messages

Multi Mapping error

Hi,
I am required to have a IP recieve 3 IDOC types triggered from BD10 . It can trigger 3 or more IDOCs. For Eg.
1 ARTMAS (only 1) , 2 INFRECs and 1 LIKOND.
If anyone IDOC has come then after a waiting period of 1 minute it should come out of FORK.
My IP is like this.
In a FORK there are 4 branches.
1) ARTMAS receiver
2) Loop(infinite) with INFREC Receiver and a Container Operation to collect all IDOCs
3) Loop(infinite) with LIKOND Receiver and a Container Operation to collect all IDOCs
4) A wait Step with a container operation to initialize endtime variable
necesary branches: 4
The Fork Comes out when the end condition is met ie the End variable is Set or if all the IDOCS have come.
Corelation on MATNR.
Next I have the transormation and send step.
In the MM i have 3 Source and 1 Target.
Artmas 0-1 occurance
INFREC 0 - unbounded
LINKND 0-unbounded
I have created the Target with External Definition and have set the correct occurance in the XSD file
I have mapped the neceessary Segments from INFREC and LIKOND and all the Segments of ARTMAS to the Target structure.
In SXMBMONI it says error on Outbound side and
I see Mapping Exception when I seen in WORKFLOW.
Is my design Correct?
I have tested the Interface & Message Mapping they are correct
Request your help.
John Rajesh
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping-Namespace:http://test.com/usa/SapRetail/ARTICLE_CLASSIFY/TESTDEMO</Trace>
<Trace level="1" type="T">Mapping-Name:IM_ARTMAS04_TO_ZARTMAS04_PUB01</Trace>
<Trace level="1" type="T">Mapping-SWCV:00000000000000000000000000000000</Trace>
<Trace level="1" type="T">Mapping-Type:JAVA</Trace>
<Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="3" type="T">Multi mapping required.</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_.</Trace>
<Trace level="3" type="T">Load b8f12d30-2c45-11da-90af-ef160a892024, http://test.com/usa/SapRetail/ARTICLE_CLASSIFY/TESTDEMO, -1, com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_.class (http://test.com/usa/SapRetail/ARTICLE_CLASSIFY/TESTDEMO, -1) in swcv b8f12d30-2c45-11da-90af-ef160a892024.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns4:Messages/ns4:Message1/ZARTMAS04_PUB/IDOC. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:292) at

Check the following
1. Have u mapped the root level element?
2. Inside interface mapping, when u say read interface, is it diplaying both the interface.
Also check ur input
may be u r not providing proper input
Regards,
Prateek

SP14 Multi-mapping - error in receiver idoc adapter

Hi,
I have a scenario where a business service should send some XML to SAP CRM. I get the file via a sender JMS adapter and try to post it to CRM via a receiver IDOC adapter.
I have created a multimapping (1:N - 1 XML file to many Idocs) as should in the repository.
In the configuration under Interface Determination, I have chosen 'RB_SPLIT' and selected the interface multimapping.
It should be pointed out, that when testing both interface and message mapping i get no error. All idocs seem to be created as they should.
When testing the setup 'real life' the message fails. The error message in the monitor says:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>InterfaceCollection</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface InterfaceCollection</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Notice that the above error is when trying to send only 1 record, which in turn then should result in only 1 idoc.
If trying to send multiple XML records, i get the following error:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>A system error occurred in the outbound binding</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the monitor in the payload of 'Request message mapping' I see as many Maindocument, Submaindocument pairs as should be Idocs.
Now i really don't know how to interpret the error messages in both cases, so I'm a little lost here...
It should be pointed out that the idoc being used everywhere in this scenario, has not been modified - from all places it is being used (and only exists) in the 'Imported objects | Idocs' place.
Also the Idoc is also being used as Inbound interface - so no mistakes here either.
I really hope someone can help me here, as I'm otherwise pretty stuck in this case.
Best regards,
Daniel

Hi Daniel,
I have exactly the same type of scenario (under SPS14 and now also SPS15), sending an XML message over JMS to XI and trying a multi-mapping to many IDocs (actually a list of orders in XML is mapped to n ORDERS Idocs).
I also face problems doing so, when I use the IDoc Adapter as outbound in the Receiver Agreement. I receive the following error:
CO_TXT_MMF_ENGINETYPE
Messages in multi message format can be sent to one adapter engine only
However, I tested the same scenario by just changing the Receiver Agreement to a File Communication Channel and - surprise, surprise - it works. One file per IDoc is created.
Of course, this is not what we want to accomplish, but when I checked this piece of documentation (sorry another link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
the IDoc adapter is not listed in the list of Adapters that are supported. Does that mean, that this feature is not supported for generating IDocs? Maybe that's a question for a SAP OSS Message?
I hope that helped you a little further - if you find out more I'd be happy to learn about it.
regards,
Peter

Multi-Mapping Error in PI 7.1 - External Definitions

Hi all,
We have just upgraded to PI 7.1 from 7.0 and run into an issue with message multi-mappings, just wondered if anyone else had met the same issue and worked it out...
When creating a message mapping, we are using as the target an external definition which is defined by an XSD generated by a third party tool (Seeburger).
When I map 1:1 (1 source message to one target message) in the message mapper, all is fine but if I try to create a multi mapping, I get an error. The process is:
a) I have a message mapping with one target message, defined as an External Definition.
b) I then go to Signature tab and add a second target message as an External Definition
c) Click back to Definition tab
d) Get the error "Object XXXXX | YYYYY not found" - where XXXXX is the external def name and YYYYY is the namespace (the SWCV namespace that is, not the XML namespace)
This only seems to happen with External Definitions which are autogenerated and I strongly suspect that is has to do with the fact that the tool that generates them always does so without an XML namespace. I have not proved this though (other Ext Defs with namespaces work for multi-mappings but that is not the only difference so I can't be sure that is the issue but have a strong hunch. This problem did not occur in 7.0.
Anyone got any ideas?
Thanks,
Chris

Hi,
This would not be of much help but, I was able to encounter this issue in XI 3.0.
What we did was to manually edit the XSD and add a namespace to it. I'm not sure if PI 7.1 is able to handle mutiple namespaces, so we limited it to this value <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified"> and made sure that this value is used for all the External Definitions used in the multi-mapping.
Regards,

Mapping error while downloading the condition records (ECC to CRM)

Hello Experts,
We were downloading the condition records from ECC to CRM system (Production), but due to Mapping error, it was unsuccessful, i wonder what's going wrong there.
When i see in SMQ2 (CRM Inbound Queue), an queue got stucked there, i.e, R3AD_ZDNL_COND_A930 having SYSFAIL status.
While debugging the queue, I have found that the queue got stuck because of u2018Mapping Erroru2019.
I found inside, Standard code reads the record from table /SAPCND/T681 (Condition Table Structure) for KAPPL = 'CRM', KVEWE = 'PR', KOTABNR = 'CUS930' and AS4LOCAL = u2018Au2019 for which the value of VAKEY_OFFSET is maintained as 0.
If system finds the value of VAKEY_OFFSET is Zero(0) then it will change the download type from D (Delta) to M (Mapping Error) and raise the error & block the Inbound Queue in CRM.
I checked in SMW01alsofor getting some more knowledge about that queue, here the error description:
Structure information for table CNCCRMPRCUS930 not available (Message class: CND_MAP)
Error when carrying out delta download (Message class: CND_MAP)
I am a technical guy and dont have much idea in CRM Middleware.
I welcome your valuable thoughts and will award full points.
Regards,
Jeo

Hi,
As you mentioned i checked for the followings:
>>In Maintain field catalog:
I found only 2-3 fields are maintained here, when i compared with A930 (A930 in ECC system).
>>Create condition tables:
I checked it for CUS930, i found the same but condition table structure name like CNCCRMPRCUS930 are missing. Is that important? Because i see in SMW01, same error is coming over there : Structure information for table CNCCRMPRCUS930 not available .
Please suggest me, now what i need to do?
Regards,
Jeo
Edited by: Jeo Denson on Dec 1, 2011 4:11 PM

Multi-Mapping Error after copying into new namespace

Hi everybody,
we got a BPM running using a multi-mapping.
We decided to design new namespaces. After copying every IR object (datatype, message-type, mappings etc.) --> SXMB_MONI shows a mapping-error.
But when I take the payload and test the mapping, everything is fine?
Any ideas?
Regards Mario

Hi,
If your payload has Messages tab remove that..and test the payload.
Payload doesn't have any Messages tab.
Just i have given example payload..this payload two strucures it will split into twofiles..and compare your payload should be like same
<?xml version="1.0" encoding="UTF-8"?>
<STRUCTURE>
<EMP_DETAILS>
 <EMPNO>123<EMPNO>
 <EMPNAME>XYZ<EMPNAME>
<EMP_DETAILS>
<STUDENT_DET>
 <STUO>123<STUNO>
 <STUNAME>XYZ<STUNAME>
</STUDENT_DET>
<STRUCTURE>
Regards,
Venu.

Multi mapping before BPM and then message routing to different IDocs

I am working on PI 7.0.
I have a scenario where a message from a third party needs to be split and then mapped to multiple IDocs in the target. This decision happens based on an RFC call to SAP ECC. Before the message passes to BPM, I have done a multi mapping to make the RFC call and split the message into multiple messages. Subsequently I have taken a multi line container inside the BPM to receive these messages and process them Parforeach and then a switch is applied to handle the rest of the scenario.
Problem is when I am trying to execute the scenario, it fails in first step(multi mapping) before the BPM, it is not able to create the node for the multiple message.
To explain a bit more, Message type say M1 is linked to Message interface MI1_OB. Then I have created an abstract message interface MI1_ABS and made it as 0---unbounded. Similarly in the message mapping I have changed the occurrence of the target message type (same as source message type)

Hi Ambrish Mishra,
Please check "Performing Several Multi-Mappings in a Series" [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm] . According it, second mapping should be able to accept this structure as input
<?xml version="1.0" encoding="UTF-8"?>
<sm:Messages xmlns:sm="http://sap.com/xi/XI/SplitAndMerge">
<Message1>
</Message1>
<MessageN>
</MessageN>
</sm:Messages>
Regards,
Raghu_Vamsee

Catch mapping error message in BPM Exception branch

Hi dudes,
Does anyone know how to catch the mapping runtime error message into a BPM exception branch? I know how to create an exception branch and how to trigger it, but I wonder whether it's possible to pass the mapping error message as shown in SXI_MONITOR (i.e. 'Cannot create target element XXXXX. Values missing in queue context').
Otherwise, everytime my BPM fails I will have to take the payload and run the mapping test in order to find out the reason of the error.
Many thanks in advance!
Paco

Thanks,
My problem is not about handling exception in BPM, but getting the mapping error description and then passing it to the exception branch.
I can see in the workflow log that this info is contained into the Exception container EXCEPTIONS[2] / T100MSG:
Message Class: SAI_MAPPING
Message Number: 217
Message Type: E
Message Variable: com/sap/xi/tf/_<MM name>
Message Variable: com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti
Message Variable: on: Cannot create target element /ns1:<path/field>.Message Variable: Values~
The text in bold is the one I am interested in to be get and mapped into the exception branch.

Multi-mapping activate changes error

Good afternoon!
I want to use multi-mapping to split one IDoc(WBBDLD04) to some xml documents.I want XI to create one xml document per segment E1WBB01 of WBBDLD04 IDoc. I set Occurrence = 0..unbounded for target interface in interface mapping . Then I try to activate changes. IX generate errors:
MaterialMasterRequestMapping | http://sap.com/xi/SBO:
A multi-mapping with multiple source or target interface instances is only recommended with asynchronous interfaces, since only a mapping of this type can be used in the process editor. IDoc WBBDLD.WBBDLD04 | urn:sap-com:document:sap:idoc:messages are not asynchronous abstract interfaces
Mapping program Message Mapping MaterialMaster2SBO_GT2 | http://sap.com/xi/SBO does not match the interface mapping. The number or frequencies of source or target messages for the message mapping are not identical to the number or frequencies of source or target interfaces.
Tell me please, what I do wrong?
Thanks!
Lositskiy Alexandr

Alexandr,
You need to create an Abstract from your IDoc (Message Interface).
To use mutli mapping, you need to create a Business Process. Then in your Business Scenario, use your Business Process and reference your multi map.
Hope this helps.
Regards,
Simon

Error: 1:n multi-mapping using BPM for file to file scenario

Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
Here is my design and configuration.
IR
Data Type: DT_file_split -> for both input and output file
Message Type: MT_file_split_sender, MT_file_split_receiver
Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
Interface mapping: OM_file_split
u2022 Source = SI_file_split_out
u2022 Target = SI_file_split_in
u2022 Mapping Program = MM_file_split
BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
ID
Import my Integration process
2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
2 Receiver determination:
u2022 Source system to BPM using interface SI_File_Abs_source
u2022 BPM to target system using interface SI_File_Abs_target
1 Interface determination:
u2022 from source system to BPM
u2022 Sender interface: SI_File_Split_Out
u2022 Receiver interface: SI_file_abs_source
1 Sender Agreement
u2022 Commu. Component: Source System
u2022 Using interface: SI_File_Abs_source
u2022 Sender Communication Channel: CC_File_Split_Sender
1 Receiver Agreement
u2022 Sender Communication Component: BPM
u2022 Receiver Communication Component: Target System
u2022 Receiver Interface: SI_File_Split_In
u2022 Receiver Communication Channel: CC_File_Split
Anyone know how to fix this?
Thanks,
Pavin

Hi,
Yes, thats the problem.
You are creating file from test tab of 1..N mapping .
In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
Messages
 Message1
 MessageType
When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
<xml......>
<Messages>
<Message1>
<MT_...>
</MT_...>
</Message1>
</Messages>
This should solve your problem.
Regards,
Sami.

Error in Multi-mapping without BPM

Hi frnds,
I am doing a scenario File-XI-File. I am using the multi-splitting thing in the Message mapping. I have taken care of all the occurance's and "enhanced" thing in the IR and ID resp. I m using SP16. I want to avoid BPM.
But therez sme error cming up. When I check the MONI, its shwing "No messages created from split mapping" and when I test my interface using the Test Configuration in the ID, its shwing error in the Receiver Determination -- "HTTP connection to ABAP Runtime failed. Error: 403 Forbidden"
I have checked most of the blogs and forum suggestions. I have checked the ICF activations as well ...
So, do come back to me with your valuable suggestions, and I will award them points, if they really help me out.
Thanks and regards.
Neetesh

Hi Neetesh,

When I check the MONI, its shwing "No messages created from split mapping"
For this, Can you check the source XML. Does it contain Tags like <messages> .. If yes, you need to remove them from your source XML.
If i am right, you have copied the XML from the TEST tab of the message mapping and pasted it in a notepad and saved it without making any changes at all..... Just do as i have mentioned above and i am sure you will no more get that error message in your MONI....
Also go through this weblog which talks about multi-mapping without BPM,
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards,
Abhy

Error wile Outbinding of the message in multi mapping

HI
I have a scenario SIEBEL->XI->R/3
the data from siebel system is send through web services
in xi this data is mapped into 2 IDOCS using multi mapping .
I tested the scenario and i am getting the following error .
<SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Messages in multi-message format can only be sent to one Adapter Engine</SAP:Stack>

Can some one help with this issue
Thanks
Nikhil

Nikhil,
For IDOC bundling, take a look at this blog and note no : 814393.
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Regards,
Bhavesh

Multi Mapping with out BPM and Receiver Determination Condition

Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-

Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks.

Error in multi mapping bpm

Hi all,
In bpm, i have used a multi mapping transformation. And I get a error message that ' Cannot produce target element, check whether the source instance is valid' . And my two source messages are valid.
But in message mapping, i have given src1 and src2 as source messages in the same order.
But in the Messages_IN tab of bpm, the order of messages is reversed and it is src2 and src1. Can this be the reason for my mapping error? If so, how to rectify this.
If this is not the case, any more suggestions?

Hi Aarthi,
Check your occurence of Target strucuture migth be 1 to 1 or 1 to Unbounded.U r message mapping doesn't populates the data for u r target strucutre.Test u r mapping by giving the valid data( Which data is pass of mapping validations).
In your mapping go to messages tab and check the sequence of your message types are correct or not.If not choose Message types once in correct sequence.
Cheers
Veera
>>> Reward Points,If it is needful.

Multi-Mapping and Message Split using BPM UDFs Error

hi
As per the below blog
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
I have just modified the UDFs(1.selectnodeifA 2.selectNodeifB)
1.selectnodeifA
for(int i=0;i<=n;i++)
if(Name.equals("A"))
result.addValue(Node);
2.selectNodeifB
for(int i=0;i<=n;i++)
if(Name.equals("B"))
result.addValue(Node);
while checking I am getting the following errors
Source code has syntax error:
D:/usr/sap/D10/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapdc8fa4d0896011dd907d001cc01cef0d/source/com/sap/xi/tf/_bpm_mm_.java:132: cannot resolve symbol
symbol : variable n
location: class com.sap.xi.tf._bpm_mm_
for(int i=0;i<=n;i++)
^
D:/usr/sap/D10/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapdc8fa4d0896011dd907d001cc01cef0d/source/com/sap/xi/tf/_bpm_mm_.java:140: cannot resolve symbol symbol : variable n
location: class com.sap.xi.tf._bpm_mm_
for(int i=0;i<=n;i++)
^
2 errors
The source code given in the blog is correct ? I thought for loop has not completed
pls help
manian

Hi manian,
I was having a look to Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure blog.
The functions are not the same. I mean, yours and blogs functions.
Each function has two parameters, Name and node. Furtheremore, in the blogs' functions is using arrays and you don't.
So, the right code will be
1.selectnodeifA
for(int i=0;i<=node.length();i++)
if(Name.equals("A"))
result.addValue(Node);
However, if you don't need an advance user defined function as you want to process just one element of the node's queue, you will not need to use for sentence.
Something like:
1.selectnodeifA
// for(int i=0;i<=n;i++)
if(Name.equals("A"))
result.addValue(Node);
Hope it is usefull for you.
Carlos

Multi Mapping: Error in If Then condition

Similar Messages

Maybe you are looking for