Multi Mapping : How to get Message count after splitting

Hi all,
I am following below blog.
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
Can any body please tell me how to get the count of messages generated after splitting in the message mapping.. I have created the message data type but not aware what is needed to be done.
Thanks and best regards,
Kulwant Singh

Multi mappings r done in order to split the messages to the number of messages required by the user. So for 1:N mapping, the details about "N" is based on ur requirement. So its not like - when u split, any number of message could get created. The count would be dependent on u.
Regards,
Prateek

Similar Messages

How to get attendies count for a calendar list in sharepoint 2013?

Hi everybody,
I am using calendar list in SharePoint 2013 for my project.
Could please tell me how to get the count of attendees using SP Designer or OOTB calculated field.
Because I want to display the fields like
TOTAL SEATS =20
Attendees= Need count
Avail seats= total - Attendees count.
In that way I want to show information about availability seats for training session.
Regards,
Dhayanand

Hi Dhaya
Please refer the links.Hope it helps :-)
http://social.msdn.microsoft.com/Forums/en-US/b8677dc5-3eb1-4bdc-92f2-f57201bfabb1/field-that-counts-attendees?forum=sharepointcustomizationprevious
http://sharepoint.stackexchange.com/questions/54253/use-count-related-column-value-as-int-in-a-sp-designer-workflow

How to get file count in variable?

dear all,
how to get file count in variable?
regards
Naseer

Hi Nazeer ,
It wont take much time .. so simple :- )
Create one os comand step
( for unix) Use
wc -l filename.txt > someoutputfile.txt
Now the number of lines in your file will be there in the output file ( someoutputfile.txt )
Step2 :-
Now use Cezar's logic to fetch the variable value ( file count ) from the output file .. ( select value for a variable from a file )
This will not take eeven a second to finish the job.
Regards,
Rathish A M

How to get Page Count of pdf in Document library in EventHandler

Hi,
How to get Page Count of pdf in Document library once uploaded has been done and i would like to update the page count value in document library column of the corresponding file.
I should achieve it in Event handler.
Which even should i use, either ItemAdded or "ItemUpdated "?
Thanks & Regards
Poomani Sankaran.

Hello,
If you are looking for file download or view count then event handler will not work. You need to enable the analytic report to your site. Once you enable it then you can see the report within a browser or you can also create custom webpart to show count
of specific file.
http://blogs.msdn.com/b/ecm/archive/2010/05/03/web-analytics-in-sharepoint-2010-insights-into-reports-and-metrics.aspx
http://sharepoint.stackexchange.com/questions/34611/count-of-files-under-a-folder-in-a-document-library
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999..

anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999.. many thanks :-)

They show in the camera roll, just not your computer?
Have you checked every folder that is in the DCIM folder?

How to get messages from IBM MQ in Oracle.

Hi ,
Can you please help me how to get messages from one IBM MQ to another IBM MQ in Oracle.
My requirement is Our upstream is putting messages from their IBM MQ to our IBM MQ
then we have to extract data from the message and load into Oracle database tables
how to implement this in oracle.
Is there any other way to implement this without writing any ORACLE PL/SQL programming.
Please help me.
Thanks.

You might want to use Oracle AQ: Integrating Oracle database applications with WebSphere MQ applications You will need to write some PL/SQL to Dequeue from Oracle AQ and convert the queue payload into insert statements.
If you need help wityh AQ, there is a separate forum: Advanced Queueing

How about get item count of table in formGroup.vm

JHeadstart Team:
I want change maxColumns=" 1" or" 2" by item count of table .but I do not know how about get item count of table .
#if (${JHS.current.group.columns} > 10)
#set ($majin = 2)
#else
#set ($majin = 1)
#end
<af:panelForm rows="1" maxColumns="$majin" width="${JHS.current.group.formWidth}" id="${JHS.current.group.shortName}FormItems">
majin
#FORM_ITEMS()
</af:panelForm>

You can do this using the following syntax:
#if (${JHS.current.itemContainer.items.size()}>10)
maxColumns="2"
#else
maxColumns="1"
#end
Steven Davelaar,
Jheadstart Team

How to get message which don't contain specified header?

Hello
I have a question:
how to get messages which don't contain specified header?
At this moment I have something like this, but it works to long (2 seconds for 15 messages, 2 minutes for 800 messages:/ )
StringTerm st = new StringTerm("Header name") {
    public boolean match(Message arg0) {
        try {
           return arg0.getHeader(pattern) == null;
        } catch (MessagingException ex) {
           return false;
Message[] m = f.search(st);where f is folder
Does exist way easier and more "time-efficient"
regards
Edited by: moj_ekranik on Dec 4, 2009 1:28 AM
Edited by: moj_ekranik on Dec 4, 2009 1:29 AM

Assuming you're using IMAP...
Try this:
folder.search(new NotTerm(new HeaderTerm("header-name", "")));

How to "get" message mapping from XI scenario

Hi guys!
Is there a way, how to export message mapping description in some way from PI? In XI 3.0 it was possible, but what about PI 7.0? Hope you understand me:)
We need it to save this mm description as documentation.
Thanx a lot!
Olian

Hey Oilan,
with the message mapping open, hold ctrl + shift and right-click in the data-flow editor (the part of the screen where the function boxes and links go).
a different menu will pop-up. just follow "export tools, export" or something like that. It is pretty straightforward.
It will save the mapping in a .mte (or something like that) extension file. It is nothing but an XML. Good thing is that you can also import this .mte file in another message mapping (of course, with same source and target messages, or it won't be able to reference the links).
Regards,
Henrique.

How to get message in realtime sent by another user using FM TH_POPUP?

I want to program a chat function between two SAP users by using ABAP.
1.User A send a message to user B by using TH_POPUP,
At the same time, the message is showed in screen as
'Send message'
2.User B get the message
->My problem is how to get the message in realtime which I want to show it in screen as 'Received message'.
Can anybody tell me how to get the message sent by using FM TH_POPUP in realtime?
Edited by: Jing Yu Huang on Feb 6, 2008 2:11 AM

Hi there
This really isn't a "conversation" type program
1) What does the original user do after sending the message -- I'm not sure if there's a WAIT_FOR_REPLY and even if there were I'm not sure you'd want the original user to have a suspended session waiting for a reply.
2) What does the 2nd user do after receiving the message --if it's just thrown up on his screen then there isn't any mechanism to return a reply from USER A'S SESSION.
You need somehow to have a continually running process which will send a message for example to user B and create an event or do somethimg so that User B is bound to the same session that sends the original message.
2 different users running the same abap don't actually have any common link between them even on remote function calls.
You need to have a central process here that shares a message space between the users (i.e a kernel type module).
Classical Abap won't do (nor is it designed for) these types of processes.
You might be able to find something in some of the 'C' coded kernel calls but as I previously posted before you are far better off using Windows for this type of stuff. (Windows Messenger for example).
ABAP unfortunately is not designed as a multi user "re-entrant" programming language - nor was it intended to be.
Another possible get around is to use the workflow system. User A sends a message which raises an event. This then starts a workflow which transmits say message to user B and notifies him of a message waiting for him. User B can reply which again raises an event and triggers workflow routing the message / reply back to user A.
The response time won't be very good but at least it will work without tying up 2 user dialog sessions - but seriously guys I'd give up on this and just use Windows Messenger or equivalent system.
These type of programs depend on a central server for the message handling - you'd have to replicate this in ABAP -- and Im 120% sure it can't be done.
Cheers
Cheers

How to get Result Count Content By Search Webpart (ContentBySearchWebPart)?

I'm writing a webpart that extends the out of the box ContentBySearchWebPart.
Does any one know how to get the search result count from this webpart?
I did not find any property?

Hi
Thanks but you are referring to the "Search Webpart". I am referring to the "Content Search" or often called "Content by Search" which is different. It's the one under Content Rollup.
Although very similar they're not - Content Search WP doesn't have that property.
What I am really after is to hide the whole webpart if there are no results coming back. I tried to figure it out and even write a jQuery that would search for the text "There are no results" message which comes from the webpart when result count=0
and hide the parent webpart that way. There will be a short flash once the page loads rendering the webpart for a split second and then disappear by jQuery - which is not great UI experience.
There is this property: "ShouldHideControlWhenEmpty" but it doesn't do anything when there are no results. The webpart is still visible. Webpart has a the Title and the Border around it so when there are no results the title and the border show
up with no results. Like I said I want to hide the whole thing in that case.
So I thought I could extend the OOTB ContentBySearchWebPart and get a hold of some kind property that would get me the result count. If the results count is 0 simply I would hide the webpart server side.
Thoughts?

How to popup message window after logon?

Is it possible to popup a message window after ERP user log on?

Jerry,
This is very extensive, but you can always use WHEN-NEW-FORM-INSTANCE event with out any form to inform users. But it can get annoying without this lenghy explanation. It depends on how long you wait before you take down the server after you announce.
It is not the perfect way of doing it, but will work (in forms only when a
new form is opened, not in JSPs).
1. Create a table with some columns like instance_id, maintenance date and
contact details just in case they want to call you, and a flag that
represents the status (in process, completed so on)
2. Create a simple workflow process with three nodes in that.
3. Whenever you want bring the server down, just create a process for this
workflow process (WF_ENGINE.create_process). This will insert row into this
table first time.
4. Next step in the process can update the status to Completed after say, 1
min (assuming users take at least a min to finish any transaction in one
form)
5. Have a timeout in the same workflow that will wait for 5 mins and inserts
one more row similar to the first third step.
6. Write a small piece of code in custom.pll in WHEN-NEW-FORM-INSTANCE which
is not form specific. Which means whenever a new form is opened up this
message will appear. This code reads this table and looks at the status
(till it is completed) to pop up a message whenever they open a new form.
Inactive users, I assume you do not care.
7. You can check in the workflow how many times you want to insert a row
into the table and send a pop up message (select instance_Id,count(*) from
dummy where count(*)=5 if you want five tries).After five tries you can
complete the workflow.
Thanks
Nagamohan

How to Get Spool ID after PO release. (To send PDF for ext E-mail)

Hi Experts,
I am new to Email sending from SAP.
I am facing a big problem from many days. I am in a new support project.
I have a issue that when ever a PO is released from ME23N or ME28 it should send a mail to vendor.
This is working fine in Development including delivery report or failed report back to approver...
I dont know where is PRD and who is doing that,
But my support manager says that only some PO's are sent to vendors not all...
everytime they approve only some emails sent to vendors...!
But every PO is same and for same vendor's...
Even failure & delivery messages are missing for (sent failed email's)
But after all I observed only one thing that we have a select statement....
DATA: GS_RESULT TYPE ITCPP.
DATA : L_DATE(9).
DATA : BEGIN OF LT_TSP01 OCCURS 0,
          RQIDENT LIKE TSP01-RQIDENT,
          RQCRETIME LIKE TSP01-RQCRETIME,
          DATE(8),
          TIME(8) TYPE N,
          END OF LT_TSP01.
SELECT RQIDENT RQCRETIME FROM TSP01 INTO CORRESPONDING FIELDS OF
                       TABLE LT_TSP01 WHERE RQCRETIME LIKE L_DATE
                                        AND   RQIDENT EQ GS_RESULT-TDSPOOLID.
IF SY-SUBRC = 0.
(All Email sending code)(including delivery & failure delivery)
Endif.
So I suspect it is not picking up the Spool request from this Table TSP01 or may be not updated to this table.
I have searched in SCN, I have seen may E-mail Codings
But every one says to get Spool- ID & Convert to PDF,,,
My Question is How to get Spool ID correctly and tell me how it is updated. when a PO released by ME23N or ME28.
please any one clear my doubt as I am completely helpless here.
Thanks in advance,
Dunlop.

Hi,
Is it a SMart form.....
If it is a smartform, then Smartfom interface itself has a spool id parameter....
you can directly het that from this parameter...
    CALL FUNCTION "FMa Name'
      EXPORTING
        control_parameters = wsl_control
        output_options     = wsl_outpt
        user_settings      = ''
        wtg_itemdetails    = tl_itemdet
         wtg_vttp              = l_vttp
      IMPORTING
        job_output_info    = sl_spooldet
      EXCEPTIONS
        formatting_error   = 1
        internal_error     = 2
        send_error         = 3
        user_canceled      = 4
        OTHERS             = 5.
    IF sy-subrc <> 0.
    ENDIF.
The inporting parameter sl_spolldet will have the Spool id.
and you fetch by, using the below mentioned way..........
    READ TABLE wsl_spooldet-spoolids INTO wsl_wa_spool INDEX 1.
      IF sy-subrc = 0.
          Convert it into PDF using 'CONVERT_OTFSPOOLJOB_2_PDF'
          then attach it and send a mail.....with all properties set such as Delivery report....
      endif.
If you have any issues, please let me know........
Thanks & Regards,
Vamsi

How to get the count of the records

Hi all,
how can we get the record count after the read statement.Means if we write a read statement based on a condition,then how can we know that how many records get effected for this read statement

You can use loop statement to read the records and write in some internal table and after the end of the loop, you can use describe command to find the number of records.
For eg. DESCRIBE TABLE tablename LINES lines.
Here the "Lines" field will give the total number of records present in the table "tablename"

How to Get HP Drivers After (DIY) Installing Windows?

Series: How to Re-Install Windows when you don't have the Recovery Discs
Intro: What is an ISO? Why is it used?
Step 1 - Get the ISO - ISO Download Links
Step 2 - Burn the ISO to a DVD or USB
Step 3 - What to do with the ISO DVD/USB? Change the Boot Order
Step 4 - What to do After Windows is Installed? How to Get HP Drivers?
Step 4 - What to do After Windows is Installed? How to get HP Driver?
Winodws is Installed, Now What?
Once the installation is complete, you'll need to go to your HP Driver Page and download all of your drivers. Your wireless function may not work automatically with a fresh install. You may have to plug an Ethernet cable into the computer and into your router to connect to the internet initially, until you have downloaded your wireless driver.
The best way to use the HP Driver Page, is by putting in your product number ('P/N' found on the HP label on the bottom of the computer) and click Go, rather than the 'Detect my product - Find Now' option. Without an HP Recovery Disc version of Windows, the 'Detect my product' option is not likely to work properly.
Another important note: If you had to go all the way into BIOS and change the Boot Order to the DVD drive (or USB), you'll have to go back into BIOS at your convenience and change the Boot Order back to booting from the internal Hard Drive first. If you used the F9 Boot Order Menu, it only changes the Boot Order temporarily, for that one power on iteration.
If you have any questions, create a new post (How to Create a New Post - Video), copy and paste it's link into a private message to me, and I will respond on your thread

Note down all the file names of the following queries first:
SELECT NAME FROM V$DATAFILE;
SELECT NAME FROM V$CONTROLFILE
SELECT NAME FROM V$TEMPFILE
SELECT VALUE FROM V$PARAMETER WHERE NAME = 'spfile'
If the last query doesn't show any file then copy $ORACLE_HOME/dbs/init<SID>.ora file.
After making the list in sqlplus issue:
SHUTDOWN IMMEDIATE
And now you can copy all of those files to some other location. Make sure you install same version of OS and Oracle to restore these files. It would be easy for you if you keep the same directory structure after reinstall and place all those files as they were earlier.
Daljit Singh

Multi Mapping : How to get Message count after splitting

Similar Messages

Maybe you are looking for