Multi Mapping in IDOCs

Hi all i have a senario in which i have to send 990 IDocs at a single point of time not more then tht.
I have done the mapping and changed the occurences of the IDocs node by externally exporting it and then importing it back again.
I also needed to repeat the main node so i changed the message ocrrences in the Message mapping to 0.. unbounded.
The problem i am facing is like it is showing errors in the end to end.
The error describtion is as follows:
Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Messages in multi-message format can only be sent to one Adapter Engine</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
is it not possible to change the occurences for the IDoc Message. If so how can i do this without it.
Rgds
Aditya

Hi,
I don't think that you need to make occurence change in mapping.
1) First export your idoc change the occurance then import
2) Then do the mapping *Don't change occurance for source idoc in mapping
check the weblog again
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
btw if you can put wht the entire scenario is dat will be better.
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b>

Similar Messages

Multi-Mapping in IDOC without using BPM ?

Hi ,
Please check ..
Can below given blog can be used to achive Multi-mapping in IDOC without using BPM ?
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards
PS

Solved .. Thx every one .
Approache Used :
1. Created mapping with Change signature on target Message type(idoc) with 1..N Occurence.
2. Operation mapping with change Occurence on Target Operation(1..Unbounded) .
3. Used same Operation mapping in Interface Determination with 0..unbounded(Multiplicity).

Multi Mapping - Receiver IDOC & Mail with BPM

Hi,
Is it possible to use BPM with Multi Mapping for IDOC & Mail receivers sent parallely..
Appreciate your help ..
Thanks,
vasanth.

Hi Michal,
Thanks Michal,
We are using PI 7.1, Our Scope to do File to IDOC & Mail scenario in between we have to do RFC Lookups..
Could you pls guide me thru the steps fo BPM,
1 SA -> OB to AA
2 ID -> OB to AA & AA to Recv
3.RD -> OB to AA & AA to Recv
4.RA -> AA to IB & AA to IB
Correct me if i'm wrong..
Clarification : Is there is any way out to implement this scenario with out BPM.
We already implemented this scenario with 2 MM & 2 OM, Scenario works fine...but we have to use 1 Mapping..
Appreciate your help in advance..
Thanks,
vasanth.

Multi Mapping with IDoc receivers

Hi,
I want to use an Interface Mapping in Enhanced Interface determination. The Interface Mapping includes two Message Mappings and should create either IDoc Type WPUWBW01 or IDoc Type WVINVE03, depending on the values of the Source Message.
In SAP Help I read the following about developing Multi-Mappings for Message Splits: "Messages that result from the split in a mapping-based message split are sent using one Adapter Engine. For this reason, only those adapters that run on the Adapter Engine are supported. "
Does this mean my scenario will not work?
Thanks in advance.
Alex

Yes correct. you will have to do two separate message mappings and interface mappings to achieve your goal.
The IDoc adapter is on the ABAp stack and therefor does not allowing you to use some of the functionality which you get on from the adapter engine on the java stack.
let me know if you need anything else...
Edited by: Alex on Jul 21, 2008 5:37 PM

Multi Mapping for JDBC Receiver JDBC Adapter

Hi All,
I'm trying an IDoc to JDBC (canonical XML) scenario using multi mapping (single IDoc as source and two different JDBC messages in receiver end). But, this is failing in RWB with some parser error. So, am not sure whether multi mapping is allowed for JDBC Canonical XML format. Please clarify.
Thanks,
Hussain.

Hi ,
JDBC Adapter supports multi mapping,so you can implement the same,but what do you mean by Canonical XML format??
Regards,
Raj

SP14 Multi-mapping - error in receiver idoc adapter

Hi,
I have a scenario where a business service should send some XML to SAP CRM. I get the file via a sender JMS adapter and try to post it to CRM via a receiver IDOC adapter.
I have created a multimapping (1:N - 1 XML file to many Idocs) as should in the repository.
In the configuration under Interface Determination, I have chosen 'RB_SPLIT' and selected the interface multimapping.
It should be pointed out, that when testing both interface and message mapping i get no error. All idocs seem to be created as they should.
When testing the setup 'real life' the message fails. The error message in the monitor says:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>InterfaceCollection</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface InterfaceCollection</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Notice that the above error is when trying to send only 1 record, which in turn then should result in only 1 idoc.
If trying to send multiple XML records, i get the following error:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>A system error occurred in the outbound binding</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the monitor in the payload of 'Request message mapping' I see as many Maindocument, Submaindocument pairs as should be Idocs.
Now i really don't know how to interpret the error messages in both cases, so I'm a little lost here...
It should be pointed out that the idoc being used everywhere in this scenario, has not been modified - from all places it is being used (and only exists) in the 'Imported objects | Idocs' place.
Also the Idoc is also being used as Inbound interface - so no mistakes here either.
I really hope someone can help me here, as I'm otherwise pretty stuck in this case.
Best regards,
Daniel

Hi Daniel,
I have exactly the same type of scenario (under SPS14 and now also SPS15), sending an XML message over JMS to XI and trying a multi-mapping to many IDocs (actually a list of orders in XML is mapped to n ORDERS Idocs).
I also face problems doing so, when I use the IDoc Adapter as outbound in the Receiver Agreement. I receive the following error:
<i>CO_TXT_MMF_ENGINETYPE
Messages in multi message format can be sent to one adapter engine only</i>
However, I tested the same scenario by just changing the Receiver Agreement to a File Communication Channel and - surprise, surprise - it works. One file per IDoc is created.
Of course, this is not what we want to accomplish, but when I checked this piece of documentation (sorry another link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
the IDoc adapter is not listed in the list of Adapters that are supported. Does that mean, that this feature is not supported for generating IDocs? Maybe that's a question for a SAP OSS Message?
I hope that helped you a little further - if you find out more I'd be happy to learn about it.
regards,
Peter

Multi-mapping for ibound IDOC

Hi! All
It would be of great help if you provide your suggestions on:
Mapping one XML source file to 6 IDOC receivers, 2 of them are of the same type and 4 are distinct idoc types.
I tried multi-mapping and received the following error:
"Messages in multi-message format can only be sent to one Adapter Engine"
Looks like IDOC adapter does not support multi mapping...
Can you please suggest any other option apart from using BPM(since it consumes lot of resources).
Thanks a lot!!
Regards,
Patrick

Hey
its not possible to do Multimapping over IDOC's without BPM.
other way around can be to do a single -single scenario,suppose u have 6 IDOC's to post then u need to design 6 different scenarios for them.
without BPM you cant do multimapping for IDOC or HTTP
Thanx
Aamir
Message was edited by:
Aamir Suhail

Multi Mapping without BPM (JMS 2 IDoc)

Hi,
i have a JMS-Query where it is necessary to map the given data to two different IDoc Types.
Therefore i have to mappings in two different namespaces. Is it possible to use these insde of the interface Mapping?! Or does the target types have to be in one mapping and one namespace?!
Can i use context objects?!
Please guide me! br, Jens

HI,
Ingeneral multi mapping in IM , we can use , to do it it should satisfies accordingly .. i mean see the below link
/people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
Multiple message mappings in one integration scenario
With context object , we can route based on condition , this will be used in interface determination with condition , to this condition , we can use Context object, but it should be configured in MI.
Regards
Chilla

IDoc Package to File using Multi Mapping urjent

Hi Experts,
I have a scenario where PI 7.1 need to receive IDocs in a package and should send three files to target system. I am using multi mapping concept here, where i have created one message mapping, one operation mapping with three interfaces specified in it. I am getting the error "Inbound interface found several times (for same sender and receiver) for the outbound interface" .

Hi,
Please make occurence of the message type in message mapping as 0..unbounded.
Also in operation mapping the occurence of inbound interface as 0..unbounded.
Also now in configuration-->interface determination... access the new operation mapping.... u will c the occurence as 0..unbounded. Refresh the cache ad execute it once more...
Let us know the result...
Babu
Edited by: hlbabu123 on Apr 3, 2010 1:16 PM

Multi-Mapping without BPM (Multiples IDoc To one EDI output?)

Hi all,
We are currently working for a client that want us to create, based on a multiple IDoc (an idoc that contains data of more than one idoc) only one output
Meaning that we have to do a mapping that based in this multiple input generates only one output that cointains all that data in only one flat file
example:
Idoc: PERX2002.PAYTEXT generates an EDI 820 with this structure:
LIST
/S_ISA (first input)
/S_ISA (second input)
At this moment we tried to use "Collect IDoc" option in SAP, and as seen in other blogs we changed the ocurrency of the message mapping to "0.unbounded", but when we release several idocs (WE14) we only get multiples output files (3 idoc collected and released give us 3 different edi files) instead only one edi file with all the data gathered together as ISA segments
In this required process possible???
Thanks in advance

As you can see in the following pics..
http://img201.imageshack.us/img201/8352/process1xz1.jpg
http://img244.imageshack.us/img244/4954/processvc9.jpg
i already made those changes, the multi-mapping is set, and also the option for collecting the IDocs and the "enhanced" option in the Integration Directory, but when i release all the idocs i still get multiple outputs (2 files), instead one file with all the gathered data
Could someone tell me if i'm missing some step?
Thanks for your time
Edited by: Alexis Alanis on Jan 7, 2008 7:24 PM

Multi mapping.. is it possible File to Idoc & FIle .. its urgent?????

Hi All,
File to Idoc & File.
I need to pick the file and i need to do multi mapping, so that from the file we can generate
one idoc which has to go to SAP and
one acknowledgment's file and sent back to partner.
Based on the below blog, looks like we can't use Idoc adapter when the target message is Idoc using Multi mapping.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Can anyone suggest me how i can achieve this scenario without using BPM.??
Regards
Seema.

Hi,
The Multi mapping is possible without BPM but not for IDOC as its not part of Java Stack. IDOC adapter is on ABAP stack.
As Raj have suggested,
You could create two different Mappings one for file to IDOC and another for file to file as an acknowledgment.
In Receiver determination you need to use multiple receivers as IDOC --R/3 receiver and the File receiver system.
It will create the IDOC as well as push the acknowledgment to file also.
But incase if you get any problem with sending the IDOC then also you will get successful acknowledgment via file. So directly there will not be any relation between these IDOC and File receivers as an delivery recipt of IDOC.
Here either you have to use the IDOC acknowledgment feature or BPM or Alert notification to get the exact notification about the IDOC posting to receiver system.
Please refer below links
1. IDOC acknowledgment
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
How to Handle Acknowledgments for IDoc (NW7.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
IDOC acknowledgements
2. BPM
File to IDOC with BPM
File to idoc with BPM
Problem in BPM implementation
Use Aleaud in BPM
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
3. Alert Notification
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
Thanks
Swarup

Multi mapping before BPM and then message routing to different IDocs

I am working on PI 7.0.
I have a scenario where a message from a third party needs to be split and then mapped to multiple IDocs in the target. This decision happens based on an RFC call to SAP ECC. Before the message passes to BPM, I have done a multi mapping to make the RFC call and split the message into multiple messages. Subsequently I have taken a multi line container inside the BPM to receive these messages and process them Parforeach and then a switch is applied to handle the rest of the scenario.
Problem is when I am trying to execute the scenario, it fails in first step(multi mapping) before the BPM, it is not able to create the node for the multiple message.
To explain a bit more, Message type say M1 is linked to Message interface MI1_OB. Then I have created an abstract message interface MI1_ABS and made it as 0---unbounded. Similarly in the message mapping I have changed the occurrence of the target message type (same as source message type)

Hi Ambrish Mishra,
Please check "Performing Several Multi-Mappings in a Series" [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm] . According it, second mapping should be able to accept this structure as input
<?xml version="1.0" encoding="UTF-8"?>
<sm:Messages xmlns:sm="http://sap.com/xi/XI/SplitAndMerge">
<Message1>
</Message1>
<MessageN>
</MessageN>
</sm:Messages>
Regards,
Raghu_Vamsee

Multi Mapping error

Hi,
I am required to have a IP recieve 3 IDOC types triggered from BD10 . It can trigger 3 or more IDOCs. For Eg.
1 ARTMAS (only 1) , 2 INFRECs and 1 LIKOND.
If anyone IDOC has come then after a waiting period of 1 minute it should come out of FORK.
My IP is like this.
In a FORK there are 4 branches.
1) ARTMAS receiver
2) Loop(infinite) with INFREC Receiver and a Container Operation to collect all IDOCs
3) Loop(infinite) with LIKOND Receiver and a Container Operation to collect all IDOCs
4) A wait Step with a container operation to initialize endtime variable
necesary branches: 4
The Fork Comes out when the end condition is met ie the End variable is Set or if all the IDOCS have come.
Corelation on MATNR.
Next I have the transormation and send step.
In the MM i have 3 Source and 1 Target.
Artmas 0-1 occurance
INFREC 0 - unbounded
LINKND 0-unbounded
I have created the Target with External Definition and have set the correct occurance in the XSD file
I have mapped the neceessary Segments from INFREC and LIKOND and all the Segments of ARTMAS to the Target structure.
In SXMBMONI it says error on Outbound side and
I see Mapping Exception when I seen in WORKFLOW.
Is my design Correct?
I have tested the Interface & Message Mapping they are correct
Request your help.
John Rajesh
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping-Namespace:http://test.com/usa/SapRetail/ARTICLE_CLASSIFY/TESTDEMO</Trace>
<Trace level="1" type="T">Mapping-Name:IM_ARTMAS04_TO_ZARTMAS04_PUB01</Trace>
<Trace level="1" type="T">Mapping-SWCV:00000000000000000000000000000000</Trace>
<Trace level="1" type="T">Mapping-Type:JAVA</Trace>
<Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="3" type="T">Multi mapping required.</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_.</Trace>
<Trace level="3" type="T">Load b8f12d30-2c45-11da-90af-ef160a892024, http://test.com/usa/SapRetail/ARTICLE_CLASSIFY/TESTDEMO, -1, com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_.class (http://test.com/usa/SapRetail/ARTICLE_CLASSIFY/TESTDEMO, -1) in swcv b8f12d30-2c45-11da-90af-ef160a892024.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns4:Messages/ns4:Message1/ZARTMAS04_PUB/IDOC. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:292) at

Check the following
1. Have u mapped the root level element?
2. Inside interface mapping, when u say read interface, is it diplaying both the interface.
Also check ur input
may be u r not providing proper input
Regards,
Prateek

Duplicate Message ID issue in case of Multi mapping (without BPM)

Hi Experts,
I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
This scenario is in Asynchronous mode.
The below screen shots give the details on what I have configures so far.
IN ESR
IN ID
IN SXMB_MONI of PI
IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
please also let me know if is there any other workaround to fulfil this requirement.
Thank you,
Regards,
Jagesh

Hi Nunu,
Check the below blog for restrictions.
Multi-Mapping without BPM - Yes, it’s possible!
Restrictions
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
Regards,
Praveen.

Multi-Mapping Message Split 1:n

Hi experts,
I have a few questions regarding a multi-mapping for a 1:n message split. I have a business process which collects IDOCs from a specific IDOC type (ZHINVOIC01).
I have a 1-to-1 Mapping for collecting the IDOCs.
After this 1-to-1 Mapping the IDOC has the following structure:
xdoc has the occurrence 0..unbounded
For every IDOC in the source structure one xdoc in the target structure should be created. My Mapping works very fine, but I have one question. If there are more IDOC-Elements in the source structure, I have more xdoc-Elements in the target structure. But I do not want to have one target-message. the mapping should create one file with the element xdoc for every IDOC element in the source structure.
I want to send a xml-file for each xdoc-element to a ftp-server. is that possible?
Thanks and best regards
Christopher Kühn

Hi Udo,
look at my example above:
for the source structure
<Messages>
   <Message1>
      <ZHINVOIC01>
         <IDOC/>
         <IDOC/>
         <IDOC/>
      </ZHINVOIC01>
   </Message1>
</Messages>
I have the following target structure:
<Messages>
   <Message1>
      <xdoc/>
      <xdoc/>
      <xdoc/>
   <Message1>
<Messages>
now the target structure is only one message, isn't it?
But I want to have for this case 3 Messages each with only one xdoc-element.
I hope that we are not talking at cross-purposes
Thanks and best regards
Christopher

Multi Mapping in IDOCs

Similar Messages

Maybe you are looking for