Multi-Mapping with BPM?

Hi Experts,
Can anyone send me a scenario which contains multi-mapping using BPM (collect pattern)........I searched on SDN but cudn't find any scenario which contains Multi-Mapping BPM scenarios. All the scenarios which r available based on without BPM.............points will given to the approriate replies.
Thanks in Advance
Faisal

Hey
strange you didn't find it,it was the second link when i searched SDN with the string "multimapping BPM"
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Thanx
Aamir

Similar Messages

Spliting files based on condition using multi mapping with BPM

Hi All,
Can any one please let me know How to <b>Splite the outbound records based on condition using multi mapping with Integration Process in BPM</b>?
Thanks
Govindu.

Hi All,
Sorry for mistake this question for Exchange infrastructure guys.
Thanks,
Govindu

Multi mapping - with BPM / without BPM

Hi Iam testing Multimapping with and without mapping.
in Mapping Editor
Source structure:
Messages 1..1
...Message1 1..1
......MT_Combined_file 1:1 DT_Combined_File
........DT_State 1..1
...........State_rec 0..unbounded
........DT_Supplier 1..1
..........Supplier_Rec 0..Unbounded
Target Structure:
Messages 1..1
...Message1 1..1
......MT_State 1:1 DT_State
........State 1..1
..........State_rec 0..Unbounded
...Message2 1..1
......MT_Supplier 1:1 DT_Supplier
........Supplier 1..1
...........Supplier_rec 0..Unbounded
Mapping:
DT_State -
> State
State_rec -
> State_rec
DT_Supplier -
> DT_Supplier
Supplier_rec -
> Supplier_rec
Testing XML taken from test tab and is as follows:
I copied XML from test tab as is and removed <ns0: messages > line.
   <ns0:Message1>
      <ns1:MT_Combined_File xmlns:ns1="http://bpm.split.com">
         <DT_State>
            <State_rec>NYC</State_rec>
         </DT_State>
         <DT_Supplier>
            <Supplier_rec>WalMart</Supplier_rec>
         </DT_Supplier>
      </ns1:MT_Combined_File>
   </ns0:Message1>
Could anyone help me what I'm doing wrong. I need to give sample XML to Legacy folks so that they generate XML data to be picked up by File Adapter.
Thanks for any help.

Hi,
take this part
<ns1:MT_Combined_File xmlns:ns1="http://bpm.split.com">
<DT_State>
<State_rec>NYC</State_rec>
</DT_State>
<DT_Supplier>
<Supplier_rec>WalMart</Supplier_rec>
</DT_Supplier>
</ns1:MT_Combined_File>
ignore <ns0:Message1> this will be generated at runtime.
Thanks,
Prakash

Multi mapping with out BPM

HI ALL ,
I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
Regards,
Tarun.

Bhavesh,
I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
sapuser,
if you scenario is asynchronous, then it's easily implemented.
But it won't be achieved with multimapping.
You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
Regards,
Henrique.

Multi Mapping with out BPM and Receiver Determination Condition

Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-

Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks.

Multi-Mapping without BPM

Hi ,
I am following this weblog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
but stuck up with what are the fields contained by ID in target message2 ...
Please check this for your clarification
http://www.flickr.com/photos/11212307@N08/1135395357/
Thanks
dushanth

ID will have only ID under it. instead of creating flat structure like the one above Jin has changed the strucutre below . you will have only ID field in it or you want u can add other fields in it .
Regards
Sreeram.G.Reddy

Error: 1:n multi-mapping using BPM for file to file scenario

Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
Here is my design and configuration.
IR
Data Type: DT_file_split -> for both input and output file
Message Type: MT_file_split_sender, MT_file_split_receiver
Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
Interface mapping: OM_file_split
u2022     Source = SI_file_split_out
u2022     Target = SI_file_split_in
u2022     Mapping Program = MM_file_split
BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
ID
Import my Integration process
2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
2 Receiver determination:
u2022     Source system to BPM using interface SI_File_Abs_source
u2022     BPM to target system using interface SI_File_Abs_target
1 Interface determination:
u2022     from source system to BPM
u2022     Sender interface: SI_File_Split_Out
u2022     Receiver interface: SI_file_abs_source
1 Sender Agreement
u2022     Commu. Component: Source System
u2022     Using interface: SI_File_Abs_source
u2022     Sender Communication Channel: CC_File_Split_Sender
1 Receiver Agreement
u2022     Sender Communication Component: BPM
u2022     Receiver Communication Component: Target System
u2022     Receiver Interface: SI_File_Split_In
u2022     Receiver Communication Channel: CC_File_Split
Anyone know how to fix this?
Thanks,
Pavin

Hi,
Yes, thats the problem.
You are creating file from test tab of 1..N mapping .
In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
Messages
      Message1
           MessageType
When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
<xml......>
<Messages>
<Message1>
<MT_...>
</MT_...>
</Message1>
</Messages>
This should solve your problem.
Regards,
Sami.

Error in Multi-mapping without BPM

Hi frnds,
I am doing a scenario File-XI-File. I am using the multi-splitting thing in the Message mapping. I have taken care of all the occurance's and "enhanced" thing in the IR and ID resp. I m using SP16. I want to avoid BPM.
But therez sme error cming up. When I check the MONI, its shwing "No messages created from split mapping" and when I test my interface using the Test Configuration in the ID, its shwing error in the Receiver Determination -- "HTTP connection to ABAP Runtime failed. Error: 403 Forbidden"
I have checked most of the blogs and forum suggestions. I have checked the ICF activations as well ...
So, do come back to me with your valuable suggestions, and I will award them points, if they really help me out.
Thanks and regards.
Neetesh

Hi Neetesh,
<i>
When I check the MONI, its shwing "No messages created from split mapping"</i>
For this, Can you check the source XML. Does it contain Tags like <messages> .. If yes, you need to remove them from your source XML.
If i am right, you have copied the XML from the TEST tab of the message mapping and pasted it in a notepad and saved it without making any changes at all..... Just do as i have mentioned above and i am sure you will no more get that error message in your MONI....
Also go through this weblog which talks about multi-mapping without BPM,
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards,
Abhy

Duplicate Message ID issue in case of Multi mapping (without BPM)

Hi Experts,
I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
This scenario is in Asynchronous mode.
The below screen shots give the details on what I have configures so far.
IN ESR
IN ID
IN SXMB_MONI of PI
IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
please also let me know if is there any other workaround to fulfil this requirement.
Thank you,
Regards,
Jagesh

Hi Nunu,
Check the below blog for restrictions.
Multi-Mapping without BPM - Yes, it’s possible!
Restrictions
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
Regards,
Praveen.

Value mapping with BPM

Hi Experts
How to do value mapping with BPM.
I tried searching for blogs in SDN but i didnt get any solution
Regards
Sowmya

Hi,
Your question is not very clear. Let me know how you want to use Value mapping?
You can implement value mapping in two ways..
1. Value Mapping Replecation Method, in which we create ABAP program (outbound proxy) in R3 which selects data from R3 tables and sends into XI, and which get stored in XI JAVA Cache untill you run the ABAP program next time which is very rare. This kind of method is best when you have large amount of R3 data.
2. If you have some data which is used just to varify the conditions at run time then in that case we go for Value Mapping creation in Integration Directiory. Below mentiond blog will give an idea how to use Value mapping in ID.
/people/community.user/blog/2007/01/08/valuemapping-using-the-graphical-mapping-tool
Value Mapping is used in Graphical Mapping which gives the value at run time only, so you cannot test it in TEST Tab of message mapping.
So as per you question, BPM can come into picture later on after you maintain the value mapping in ID and do the corresponding mapping in IR.
Regards,
Sarvesh

Multi-mapping with message bundling but without using BPM

Hi all,
I have a requirement to bunch specific no. of records (say 50) from source message and create separate target messages for those bunches. For example, if the source message has 120 records, then there should be three separate target messages created containing 50, 50 and 20 records each.
I am wondering whether this multi-mapping is possible without using BPM, as the typical no. of records in the source message are in the range of 600 to 800, and rarely (twice or thrice a month) they shoot up to 2000. So my concern is whether BPM would affect the performance. We are using PI at SP12.
Regards,
- Shankar.

Sorry for late reply.. Well the sender is a file system, which sends a single XML file containing multiple records. (I mean I have a sender file adapter that polls periodically from a specific path and picks up the file when it is available)
The no. of records in the source file may be different in each run. The requirement on the receiver system is that it can handle a file which has maximum of 'n' records only (say 50 in my example)
Now the sender file can contain any no. of records. It may contain 10 on some day, or 200 the next day, or 120 on the third day. But on the receiver side, I want the files to be created such that each will contain AT MAX 50 records.
So, if source file has <=50 records, then there will be only 1 target file having the same no. of records.
If source file has between 51 to 100 records, then there will be two target files. One will have 50 records, and the second will have remaining records.
And so on..
Regards,
- Shankar.

Multi Mapping without BPM (JMS 2 IDoc)

Hi,
i have a JMS-Query where it is necessary to map the given data to two different IDoc Types.
Therefore i have to mappings in two different namespaces. Is it possible to use these insde of the interface Mapping?! Or does the target types have to be in one mapping and one namespace?!
Can i use context objects?!
Please guide me! br, Jens

HI,
Ingeneral multi mapping in IM , we can use , to do it it should satisfies accordingly .. i mean see the below link
/people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
Multiple message mappings in one integration scenario
With context object , we can route based on condition , this will be used in interface determination with condition , to this condition , we can use Context object, but it should be configured in MI.
Regards
Chilla

Exception Handling for Multi Mapping in bpm

Hello,
does anybody know a way of catching an error occured in a multi-mapping used in an integration process.
It seems to me, that when i am using a multi-mapping in an integration process and an error occurs, the message cannot get back to the integration process. In smq2 I can see, that there is the following error:
CX_MERGE_SPLIT
Regards
Günther

The transformation-step is in an block with an exception branch and it is well configured.
When I use a 1 to 1 mapping and an error in the mapping occurs, all is correct. The integration process jumps in to the exception branch and finishes correct. But when use a multi mapping (1 to n; n to 1; n to m) and an error in the mapping occurs, then there is always an error in the bpe inbound queue.
There must be some problem with the split-and-merge program. I think that the split-and-merge program handles the merging of n messages into 1. You can see this when you test a mapping in the integration builder designer. In a multi-mapping there you can see a xml-structure that envelopes the application messages, f. ex.:
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <myMessage1>data</myMessage1>
   </ns0:Message1>
   <ns0:Message2>
      <myMessage2>data2</myMessage2>
   </ns0:Message2>
</ns0:Messages>

Multi-Mapping without BPM (Multiples IDoc To one EDI output?)

Hi all,
We are currently working for a client that want us to create, based on a multiple IDoc (an idoc that contains data of more than one idoc) only one output
Meaning that we have to do a mapping that based in this multiple input generates only one output that cointains all that data in only one flat file
example:
Idoc: PERX2002.PAYTEXT generates an EDI 820 with this structure:
LIST
/S_ISA (first input)
/S_ISA (second input)
At this moment we tried to use "Collect IDoc" option in SAP, and as seen in other blogs we changed the ocurrency of the message mapping to "0.unbounded", but when we release several idocs (WE14) we only get multiples output files (3 idoc collected and released give us 3 different edi files) instead only one edi file with all the data gathered together as ISA segments
In this required process possible???
Thanks in advance

As you can see in the following pics..
http://img201.imageshack.us/img201/8352/process1xz1.jpg
http://img244.imageshack.us/img244/4954/processvc9.jpg
i already made those changes, the multi-mapping is set, and also the option for collecting the IDocs and the "enhanced" option in the Integration Directory, but when i release all the idocs i still get multiple outputs (2 files), instead one file with all the gathered data
Could someone tell me if i'm missing some step?
Thanks for your time
Edited by: Alexis Alanis on Jan 7, 2008 7:24 PM

Multi mapping before BPM and then message routing to different IDocs

I am working on PI 7.0.
I have a scenario where a message from a third party needs to be split and then mapped to multiple IDocs in the target. This decision happens based on an RFC call to SAP ECC. Before the message passes to BPM, I have done a multi mapping to make the RFC call and split the message into multiple messages. Subsequently I have taken a multi line container inside the BPM to receive these messages and process them Parforeach and then a switch is applied to handle the rest of the scenario.
Problem is when I am trying to execute the scenario, it fails in first step(multi mapping) before the BPM, it is not able to create the node for the multiple message.
To explain a bit more, Message type say M1 is linked to Message interface MI1_OB. Then I have created an abstract message interface MI1_ABS and made it as 0---unbounded. Similarly in the message mapping I have changed the occurrence of the target message type (same as source message type)

Hi Ambrish Mishra,
Please check "Performing Several Multi-Mappings in a Series" [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm] . According it, second mapping should be able to accept this structure as input
<?xml version="1.0" encoding="UTF-8"?>
<sm:Messages xmlns:sm="http://sap.com/xi/XI/SplitAndMerge">
<Message1>
</Message1>
<MessageN>
</MessageN>
</sm:Messages>
Regards,
Raghu_Vamsee

Multi-Mapping with BPM?

Similar Messages

Maybe you are looking for