Multi mapping with out BPM
HI ALL ,
I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
Regards,
Tarun.
Bhavesh,
I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
sapuser,
if you scenario is asynchronous, then it's easily implemented.
But it won't be achieved with multimapping.
You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
Regards,
Henrique.
Similar Messages
-
Multi Mapping with out BPM and Receiver Determination Condition
Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks. -
hi...guys
how we will do 1:n multi mapping with out using bpm , pls explain..
with regards,
Prasad.Hi Prasad
Go thru the forums given below.. which will discuss the same...
1:N mapping without using BPM
Re: 1:N mapping without using BPM --> IDOC to multiple files
Cheers..
Vasu
<i>** Reward Points if found useful **</i> -
Spliting files based on condition using multi mapping with BPM
Hi All,
Can any one please let me know How to <b>Splite the outbound records based on condition using multi mapping with Integration Process in BPM</b>?
Thanks
Govindu.Hi All,
Sorry for mistake this question for Exchange infrastructure guys.
Thanks,
Govindu -
File to Web service (SOAP) to File scenario with out BPM in PI 7.1
Hi All,
I have scenario File to Web service (SOAP) to File scenario with out BPM.i am getting the below error:
1) Error MP: unexpected exception caught com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
2) Error ROB: error during processing: com.sap.aii.af.lib.mp.processor.ModuleProcessorException: Processing Error
PI server is 7.1 with SP:8
I have configured the scenario like this
1) 2 File channels - Sender & Receiver ,1 RFC channel - Receiver. We need to note that, the additional Module parameters need to be added only for sender File channel
2) Created Sender Agreement
3)Created Receiver Determination
4)Created Interface Determination
5)Created Receiver Agreement
Regards,
RameshHi,
Thanks for your reply!!
My Scenario is File to SOAP to File.
Configred modules in Sender channal below:
Prcessing sequence:
Number Module Name Module Key
1.......... AF_Modules/RequestResponseBean.......1
2.......... CallSapAdapter..........................................2
3.......... AF_Modules/ResponseOnewayBean.......3
Module Configuration:
Module Key Parameter Name ParameterValue
1 passThrough true
3 receiverChannel receiverChannel name
3 receiverService receiverService name
please tell any more confiration requered.
Regards,
Ramesh -
Error in Sysn-Async with out bpm
Hi folks,
I have a scnario JDBC-PROXY-file..with out BPM.
File - RFC - File without a BPM - Possible from SP 19.
by using this blog
Now for this i used sync JDBC sender here it is repetely taking data from jdbc and it is not updating in the tables
when i see in the CC monitoring error is
Error occurred while sending message (GUID 2cc288ac-a012-44f8-018a-d5c3d7983e4e): com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId.
Now For this scnario i need to add any more modules in the Adapter configuration..
As i am not receiving any responce...in a file...
Thanks and Regards
VijayHello everyone!
I do not know if you already solved this issue.
I was facing the same problem and I've figured out that my CC (in Module screen) was set up with the wrong Parameter Value for the Parameter Name "receiverService".
That occured because I had changed my Service name when I moved my scenario to production.
Hope I could help!
Regards!! -
XI ALERTS with out BPM Are not working.
Hi All,
We are on XI 3.0 sp14. Alerts with out BPM are not working. I want to apply notes 906044, 876546. It says i need to make some changes to the following functions. I could not able to find these Function modules in the first place. Can some one help me out?
<b>Note -
Object -
Name</b>
906044 -
function---- SXMS_ALERT_ERROR_RECEIVE
906044 -
function --- SXMS_ALERT_ERROR_SEND
906044&876546--method ---CL_XI_ALERT HAS_ACTIVE_RULE
906044 -
method -
CL_XI_ALERT_UTIL GET_MDT_URL
905896 -
method -
CL_XI_ALERT CREATE_ALERT
Thank you
Ganges Leaves.Ganges
Login into XI Developement and give SE37 Transaction. Then you give SXMS_ALERT_ERROR_RECEIVE and click 'display'.
Then you check for the methods CL_XI_ALERT HAS_ACTIVE_RULE, CL_XI_ALERT_UTIL GET_MDT_URL, CL_XI_ALERT CREATE_ALERT and make the changes according to service notes. If you dont find this methods in this function then you can try in SXMS_ALERT_ERROR_SEND.
Regards,
---Mohan -
IDOC Number from payload in Alerts with out BPM
Hi Everybody,
I need to send the IDOC Number as Alert for the user.
Is it possible to do with out BPM either by Alert Frame Work or CCMS?
Is there any alternative way to capture the Idoc number and display for the erroneous messages?
Helpful Answers will be rewarded points.
Thanks,
ZabiYes,
You can also do it via alerts.
Alert can be triggered in different ways.
1) Triggering by Calling a Function Module Directly. or from UDF
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
2) Triggering by Calling a Function Module in the Workplace Plug-In.
3) Triggering with an Event Linkage.
4) Triggering with the Post Processing Framework (PPF) or Message Control (MC)
5) Triggering from a Workflow.
6) Triggering from CCMS with autoreaction.
7) Triggering from BPM.
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
8) Triggering alert by configuring a rule from RWB.
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
Br,
Madan Agrawal -
Jdbc to file synchronous with out bpm
hi masters,
can u explain me the step by step of jdbc to file scenireo...... with out bpm ... but it is synchronous...
thanks in advance,
jp.Hi,
very useful one's
try them
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
Regards,
Vishal
Message was edited by:
vishal kharat -
Hi Experts,
Can anyone send me a scenario which contains multi-mapping using BPM (collect pattern)........I searched on SDN but cudn't find any scenario which contains Multi-Mapping BPM scenarios. All the scenarios which r available based on without BPM.............points will given to the approriate replies.
Thanks in Advance
FaisalHey
strange you didn't find it,it was the second link when i searched SDN with the string "multimapping BPM"
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Thanx
Aamir -
Multi-mapping with message bundling but without using BPM
Hi all,
I have a requirement to bunch specific no. of records (say 50) from source message and create separate target messages for those bunches. For example, if the source message has 120 records, then there should be three separate target messages created containing 50, 50 and 20 records each.
I am wondering whether this multi-mapping is possible without using BPM, as the typical no. of records in the source message are in the range of 600 to 800, and rarely (twice or thrice a month) they shoot up to 2000. So my concern is whether BPM would affect the performance. We are using PI at SP12.
Regards,
- Shankar.Sorry for late reply.. Well the sender is a file system, which sends a single XML file containing multiple records. (I mean I have a sender file adapter that polls periodically from a specific path and picks up the file when it is available)
The no. of records in the source file may be different in each run. The requirement on the receiver system is that it can handle a file which has maximum of 'n' records only (say 50 in my example)
Now the sender file can contain any no. of records. It may contain 10 on some day, or 200 the next day, or 120 on the third day. But on the receiver side, I want the files to be created such that each will contain AT MAX 50 records.
So, if source file has <=50 records, then there will be only 1 target file having the same no. of records.
If source file has between 51 to 100 records, then there will be two target files. One will have 50 records, and the second will have remaining records.
And so on..
Regards,
- Shankar. -
IDoc Split with out BPM using SplitByValue at the LineItem Level
I have an Invoice idoc contains line item and identifier changes into groups, let's say A & B
Using Message Mapping, Will i be able to Split into 2 IDOCs and combine A into one IDOC and B into Another IDOC and send it across to ECC with out using BPM?
Btw the header is commom for both the IDOCs
Source
<Header>
<headertext>headername</headertext>
<lineItem>
<item1>A</item1>
<item2>B</item2>
<item3>A</item3>
<item3>B</item4>
</item>
</lineitem>
</header>
Target
IDOC 1
<Header>
<headertext>headername</headertext>
<lineItem>
<item1>A</item1>
<item2>A</item2>
</item>
</lineitem>
</header>
IDOC 2
<Header>
<headertext>headername</headertext>
<lineItem>
<item1>B</item1>
<item2>B</item2>
</item>
</lineitem>
</header>
Any inputs are appreciatedI actually gave wrong information on the source structure, I am trying to execute scenario with the given examples, meanwhile any help is appreciated
<Header>
<Date>20100112</Date>
<Amount>10</Amount>
<No>20</No>
</Header>
<InvoiceItem>
<Line1>10</Line1>
<Line2>10</Line2>
<Amount>10</Amount>
<ActionIndicator>I</ActionIndicator>
</InvoiceItem>
<InvoiceItem>
<Line1>20</Line1>
<Line2>20</Line2>
<Amount>20</Amount>
<ActionIndicator>C</ActionIndicator>
</InvoiceItem>
<InvoiceItem>
<Line1>30</Line1>
<Line2>30</Line2>
<Amount>30</Amount>
<ActionIndicator>I</ActionIndicator>
</InvoiceItem>
<InvoiceItem>
<Line1>40</Line1>
<Line2>40</Line2>
<Amount>40</Amount>
<ActionIndicator>C</ActionIndicator>
</InvoiceItem>
Target 1
<Header>
<Date>20100112</Date>
<Amount>10</Amount>
<tNo>20</No>
<ActionIndicator>I</ActionIndicator>
</Header>
<InvoiceItem>
<Line1>10</Line1>
<Line2>10</Line2>
<Amount>10</Amount>
</InvoiceItem>
<InvoiceItem>
<Line1>30</Line1>
<Line2>30</Line2>
<Amount>30</Amount>
</InvoiceItem>
Target 2
<Header>
<Date>20100112</Date>
<Amount>10</Amount>
<tNo>20</No>
<ActionIndicator>I</ActionIndicator>
</Header>
<InvoiceItem>
<Line1>20</Line1>
<Line2>20</Line2>
<Amount>20</Amount>
</InvoiceItem>
<InvoiceItem>
<Line1>40</Line1>
<Line2>40</Line2>
<Amount>40</Amount>
</InvoiceItem>
I know the part of Splitting IDOC, which was executing correctly, with the external data type changes. Please advice -
Acknowledgement from receiver file Adapter with out BPM
Hi Gurus,
I am trying to get Acknowledgement from Receiver file Adapter with out Using BPM.
Here is the scenario. I am sending files from different Sender Adapters. There is only one target that is File Adapter. After each successfull and failure transaction I need an Acknowledgement that needs to trigger another receiver adapter and send the the file name and timestamp to that file.
Hope this is a complicated scenario. Please help me.
Thanks,
Kevinfrom sap note 821267
6. Acknowledgements
* Q: Does the File Adapter support acknowledgements?
* A: You need to distinguish system acknowledgements (indicating that a message has been received by the target system) and application acknowledgements (indicating that the message has been successfully processed by the application on the receiver side).
The receiver of an XI message will only send an acknowledgement back to the sender if the sender has requested one. However, the File Adapter has no functionality that relies on the receipt of an acknowledgement, so it never requests one.
On the other hand, if a File Adapter Receiver receives a request to send an acknowledgement, it will do so for a system acknowledgement request. Application acknowledgements are not supported at all as the File Receiver has no way to determine if the written file has been correctly processed by the back-end application, which is what a positive application acknowledgement would imply.
this means that your requirement is ideally not possible without a BPM -
can we do File---> BAPI with out BPM
Which version of XI you are using??
XI 3.0 or PI 7.0?? and SP for it?
Reffer this File to RFC Scenario without BPM
FOr solution reffer this : File - RFC - File without a BPM - Possible from SP 19.
Thanks
Farooq. -
Hi All,
I have a HTTP to webservice scenario currently running in production , i.e .,
From the HTTP Application user sends a request to XI . XI makes a SOAP call and sends the request back to HTTP Application .
now I have a new requirement to write the SOAP request message to a JMS channel also.
Let me know how is it achievable with out using BPM .
Thanks and Regards,
KLKThanks for the replies , I have to clarify my question
Yes my requirement is to send the soap - response to JMS .
The above blog is File - RFC - File ( Asyn/sync) but my requirement is
HTTP - SOAP -- JMS (Syn/Asynch) .
The current scenario in production my o/b and i/b message interface are synchronus .
I need a i/b asynch interface reciepent for the SOAP response .
Let me know your thoughts
Thanks
KLK
Maybe you are looking for
-
Issue: Upgrading from 11i to R12 - zxmiggltaxopts.sql
Hi, we are upgrading from 11.5.10.2 to 12.1.1. During upgrade patch, one of the worker zxmiggltaxopts.sql has failed with below errors: sqlplus -s APPS/***** @/orafinx/apps/apps_st/appl/zx/12.0.0/patch/115/sql/zxmiggltaxopts.sql declare ERROR at line
-
BW Slow moving item report in MC46 (R3) Format
Dear Guys, Regards.We got a requirement : 1) A Slow moving Item report in BW in MC46 Report format(R3).Especially the client wants the "Period:Last Consumption(Days)" in the input selection criteria.The Standard BW Slow Moving item re
-
Issues with Office 2010 and Acrobat Pro 8
Good Day All; We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Offic
-
Same source file name with a different extension
Hi All, I have a source file which is dynamic all the time. Can I create a target file which has the same name as the source file but with a different extension. Scenaio is file to file. test. xml is the source file name and the target file name shou
-
Installing J2SE v1.4.2_05 JRE "error reading setup initializing
I have a customer who just updated their OS on their computer from Windows 98 to XP and now they are trying to download the J2SE v1.4.2_05 JRE version of Java. In the installing process it gives them this error: "error reading setup initializing" Any