Multi Media Key Board

The multi media keys on my HP HID wireless Multi Media keyboard no longer work although the rest of the keys are O.K.. I think I did something wrong when I went into the 'properties' as I can no longer see the 'BUTTONS' listed there. Can anybody help please.

Hi Waren
Adding to Tulse's helpful suggestions...
I recently created my first Keynote. Before using the application I watched the short videos from this Apple Keynote Tutorial. This short time investment helped me immensely. Saved a lot of time.
Images: you will have to import your photos into iPhoto or Aperture, as Keynotes Media Browser accesses your images from those sources. And, as Tulse suggested keep images at or smaller than 1024x768. Otherwise you may experience lag time.
When I prepare images for Keynote, I first alter them in Photoshop as PSD files using a minimum of 240 dpi. When saving, I change the DPI to 150 dpi (probably can get away with 72 dpi, however I bumped it a bit just to be safe). Then, I save as a JPG using the maximum quality setting (12). Image size is usually around 350K. Then, I open iPhoto (or Aperture) and import the images (shift/command/I keys is the iPhoto shortcut). I haven't had any problems with artifacts, however, if you do, then I also second TIFF as the alternative.
Also, make sure you are creating the keynote presentation on the same machine you'll use to run Keynote. On the MacBook Pro in Keynote, you'll set the Keynote size via the Inspector>Document panel to match your machine's monitor display size. In your case, select the Custom option and set it to 1440x900.
Lastly, always best to have at least one dry run, ideally on screen. Keynote has great transitions. The tutorial provides some good suggestions about how to use them effectively to keep your audiences attention.
Good luck

Similar Messages

Multi media key

Hi.
It wont let alter any settings as once i press the multi media key. The screen blinks and then returns back to the normal standby status screen. Is there another way of changing it back to default?

I think you should try the factory resets. Use *#7780# first and if that does not work then try *#7370#
Remember to backup all your data before resetting.

Sk-2061 Keyboard Multi-media keys not working on windows media player

I have an HP ENVY Recline 27-k150xt TouchSmart All-in-One CTO Desktop PC that came with the SK-2061 keyboard. The problem is like i said in my subject. However, I have also tried restarting the HID services and setting them to automatic which I read helped with the volume keys...that did not fix my multimedia keys.
All that i can do with the MM keys is when I have the player active i can press the play/pause button and then the play/pause button on the player is selected but I still have to hit the space bar to "press" the button.
I need to be able to pause and play the media player while in a document (i'm transcribing some audio files).
Thanks!

Ha! Nevermind I figured it out. For anyone else who is a dingbat just hit the function key and f7...man i feel dumb

Multi media key wont function N95

hi all,
Has any one encountered problems with the multimedia key on the keypad.(where you have an animated/scrolling menu)nokia N95 handset
Mine has ceased to function ever since i changed the default image in the background to an image stored in the gallery, i have updated the firmware to the new v20 and i still have the same problem.
does any one have any solutions please?Message Edited by mjkass on 09-Dec-200704:04 PM

Mine seems to be fine.
Have you tried changing the picture back to the default?
The best way to get a quick response is to use the boards. Please do not be offended if I don't answer emails immediately.

N95 multi media key

hi all,
Has any one encountered problems with the multimedia key on the keypad.(where you have an animated/scrolling menu)nokia N95 handset
Mine has ceased to function ever since i changed the default image in the background to an image stored in the gallery, i have updated the firmware to the new v20 and i still have the same problem.
does any one have any solutions please?

Mine seems to be fine.
Have you tried changing the picture back to the default?
The best way to get a quick response is to use the boards. Please do not be offended if I don't answer emails immediately.

[SOLVED] mplayer, xF86 media keys

Hi,
mplayer is my software of choice for playing music. That's what I would like to do with it: bind some of the xF86 keys to move to the next/previous music -- instead of going to the terminal where mplayer is originally running and use the keys < / > to move between tracks.
However, after some search, I couldn't find a script/command that I could bind to the xF86 keys that allows me to do this. Is there such a command I could use?
Thanks!!
p.s.: since xmonad is my windows manager, I'm using the xmonad configuration file to bind my media keys.
Last edited by falsum (2010-05-08 09:20:48)

Create a pipe
mkfifo mplayer.pipe
start mplayer like so
mplayer -slave -input file=mplayer.pipe
now you can send commands to this fifo, for example:
echo "pt_step 1" > mplayer.pipe
echo "pt_step -1" > mplayer.pipe
for next song/previous song.
Edit: Gah, beaten by snakebite. The dangers of multi-tasking. Oh well...
Last edited by Gusar (2010-03-27 10:52:12)

HT201401 Few digits of my iphone 4S key board are not responding. kindly advise.

Few digits of my iphone 4S key board are not responding. kindly advise.

Hello Sp2sun,
Thanks for using Apple Support Communities.
Use this article to troubleshoot touchscreen issues
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/TS1827?utm_source=twitterfeed&utm_medium=twitter
Tip: To isolate an issue related to a portion of the Multi-Touch display, follow these steps:
Open the Maps application and double-tap each corner, then the center, to verify that it zooms in to each section.
If a specific area is affected in another application, note the location and try to verify touch functionality for that location in the Maps application.
On iPhone and iPod touch, you can also use Calculator:
Open the calculator app to test all but the top row of the screen. Press each button on the calculator and verify activity.
Have a nice day,
Mario

I am having trouble.I can't even set my Touch back up. I can type on the key board. I try to touch one key and a bunch go. I don't even have to touch the screen.

I am having trouble.I can't even set my Touch back up. I can type on the key board. I try to touch one key and a bunch go. I don't even have to touch the screen.

First make sure the screen is clean,
The try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings (if you can)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem
Apple Retail Store - Genius Bar

Compatible Multi-Media Keyboards that work with LiveDock & Arc S

I've just bought a LiveDock and a Trust multimedia keyboard (model 15035-02, picture below) with a trackball mouse built-in to go with my new Arc S phone. When you plug the USB dongle for the keyboard into the LiveDock, it sees it and comes up on the TV screen, but no cursor appears and no keys function on the keyboard. I can't take the keyboard back because I will get charged a 20% restocking fee, but don't fancy buying any more, just to find they aren't compatible.
Is there a list of compatible multi-media keyboards that work with the LiveDock? I bought the phone and the LiveDock primerily to use it next to the TV for odd browsing and would love a combined Keyboard and mouse to make it easier.
Could it be I've not configured something right? Is there a menu I've missed?
Cheers
Steve

Hi antonisk,
As I mentioned above, the Logitech K400 is superb for the job if you can purchase one. It is light and really easy to use with the phone and LiveDock.
I think Sony Ericsson should be more specific on the website about what works with their LiveDock. It should give at least a few compatible keyboards in the description and not just wait for people to buy the product and then spend time and money finding what will work with it.
They make great costly videos showing the customer that the LiveDock can be connected to a keyboard, mouse and games controller, but don't tell us which ones to go out and buy, if you want to take up this option.
I would have thought with these options being the main reason why the LiveDock was manufactured, that they would have spent a little time finding which devices actually work with it and not just waiting for people like myself to have to trawl the internet and worst still buy products that aren't compatible.

HT1689 my ipad mini retina display is disabled. I believe I know the cause. I packed it with my blue tooth key board in my back pack. The key board likely entered various keys and the ipad believes these entries were invalid password attempts. I am tr

my ipad mini retina display is disabled because my blue tooth key board made number key entries while in my back pack. How do I re-enable?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How do I pair an apple key board to a brand new mac mini?

How do I pair an apple key board to a brand new mac mini?

Have you tried a wired keyboard to turn on the BT system? Macs can require some special key-combinations that *must* be seen before the OS starts and BT sometimes does not activate before the OS.

Key board and track pad not working

Ok, My situation is similar to some of the other things posted but not quite.
I tried to wake my computer up from sleep the other day and it wouldn't "wake up" so I did a hard shut down and restart. When it restarted the key board and track pad did not work. The caps lock light wouldn't come on or anything. I tried connecting a usb apple keyboard and mouse and those didn't work either.
When switching to windows in bootcamp, everything works. So... I guess that means it's a software thing.
I called Apple support and we did all the possible key combinations and restarts possible and it came down to this: I need to archive install tiger again, then install all of the updates, then install leopard back on (I don't have leopard disk because it was a family pack and im at college). My roomate's macbook (White, bought in aug 2008) install disks which are 10.5.2 do not work with my computer.
My question is: Is this really the correct solution to my problem? Will archiving and installing tiger then leopard affect my files? I haven't backed up using time machine in a month, so is there a way to backup through osx with my keyboard and trackpad not working or can I do a good back up through my windows partition in bootcamp? Any more tips? Thanks, this has never happened before and I guess I'm a little clueless.

Do you have access to another Mac? If so, possibly you could use Firewire Target Disk Mode to access your drive and do a current Time Machine backup:
http://support.apple.com/kb/HT1661
Since you have a family pack of Leopard at home, possibly you could have someone burn a safety copy of it and send it to you so that you can reinstall Leopard. Once you have the OS installed and brought up to date, you could even restore from Time Machine if you had to.
Since we don't know all the steps you took, it's hard for any of us to say if this is the right solution. Evidently the Apple tech came to the conclusion that your software had become corrupted, and this could well be the case, since everything works on the Windows partition. Hence the suggestion to reinstall the OS.
I think you need to get a copy of the Leopard disc so that you can bring your OS completely up to date. I'm not sure of the logistics of doing an Archive and Install with both Tiger and Leopard, especially if much of your work has been done on Leopard. I'm not even sure if it's necessary to reinstall Tiger--it might be better to just reinstall Leopard using Archive and Install.
It's always a good idea to have a good up to date backup like Time Machine before attempting an Archive and Install, because things can go wrong. If they do, you may end up having to do an erase and install. If that happens, you can restore from your Time Machine backup.
I think what you should do is to get a copy of your Leopard disc, and then boot from it and try to do the Archive and Install. Navigate to Disk Utility first and verify both permissions and the disk and repair if necessary. Then proceed with the Archive and Install. Once you're done, run all the updates. Then go to Disk Utility and repair permissions.
Good luck!

I am trying to copy and paste a work document into my online class. POP up states that Cut, Copy, and Paste are disabled by my Modzilla broser and that I could use key board short cuts or visit the website.

'''bold text'''Want to copy & paste word doc onto my online class discussion post. Unable to. I either need directions on how to use key board short cuts. I have visited the Modzilla web site like it also stated but am unable to find an answer to this.

See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/allowclipboard-helper/

Media Keys Not Working - Apple Wireless Keyboard - Snow Leopard 10.6

Hello, I am a new user to this Support Area and i tried calling but as its Christmas Day i cant get through because there closed so i decided to join here.
Ok basically my problem is that i have a iMac and i recently installed Snow Leopard and on Christmas Day i got a Wireless Apple Keyboard i set it up all went well and got through all the bluetooth process fine except when i went to try use the Media Keys which are Brightness Up/Down, Volume Control, Play/Pause/FastForward and the other two don't know what there called tho when i press any of them they dont work when i press F12 which has a picture of Volume Up it goes to my Widgets thing and when i press F11 which is Volume Down it moves all the current apps out of the desktop like a clearing space function.
I Really would like to have the Media Keys back to how there supposed to be i don't know why it is doing this but i think its Snow Leopard.I Have tried everything possible in System Prefs even removed the keyboard from the Bluetooth paired devices and re paired it but still nothing. It would be mostly appreciated if one you guys could help me soon..
Thanks Sean

Wow! I am in the exact same situation. I don't think it is Snow Leopard tho b/c when I plug my old keyboard back in the media keys work fine. It might have to do with the apple aluminum keyboard 2.0 update but when I try to download that it says my system is unable to support it (eben tho it only requires at least 10.5.8).
If you find a solution let me know.

MY KEY BOARD IIGHTS ARE ON BUT NO MATTER WHAT I DO I CAN GET THE SCREEN LIGHT ON

my key board lights are on., but no matter what i do i cannot get the screen of my mac pro on

Apple computers: Troubleshooting issues with video on internal or external displays
Scroll down to Reset the system

Multi Media Key Board

Similar Messages

Maybe you are looking for