Multi monitor cursor swapping

I've got three monitors lined up and I'm looking for a way to instantly center the cursor on a specific display to avoid dragging it everywhere. I know there's a software called Multi Monitor Mouse for Windows which is supposed to handle that pretty well. So do you guys know a corresponding software or script for mac or is it possible to run the win. app in OS X via 3rd party software?
/Erik

Is the question clear or should I rephrase it?
I need a keyommand to move the cursor from one screen to another.

Similar Messages

Multi monitor shows swapped names

I got a strange situation. I started looking into color management and run into a problem.
I have a laptop with a ATI HD5470 vidoe adapter. I have the laptop minitor and I have an external minitor Samsung SyncMaster 206BW.
When I look in the Screen Resolution window it shows that 1 is my laptop screen and two is te external monitor.
Looking at the description of the monitor for 1 it tells: Monitor of laptop, for 2 it tells SyncMaster.
So far so good.
But when I select Laptop monitor (1) and going into Advanced Settings the window what pops up shows me the details of the SyncMaster monitor.
Going back to the main menu and selecting SyncMaster (2) and selecting Advanged Settings than I got a popup window of the Laptop monitor.
When I go to the Color Management settings window I see the same swap.
How can I get this correct??
Thanks in advance,
Hans Smits

Hi Hans,
It's indeed too strange.
Let's try to disconnect them from computer and uninstall them from Device Manager:
1. Unplug the monitor cables.
2. Right click Computer, select Manage.
3. Click Device Manager in the navigation pane of the left, extend the
Display adapters.
4. Right click them one by one and click Uninstall.
After that, reinstall them again and keep the latest drivers for test.
Karen Hu
TechNet Community Support

Mouse pointer is unchangeable at 100% scaling in multi monitor setup with different resolutions

Hi there, I have been asked by one of the moderators of the Windows 8.1 forums to post this topic here. You can see the thread relating to this post here
http://answers.microsoft.com/en-us/windows/forum/windows8_1-tms/cant-change-the-cursor-pointer/ae8ad8a0-3ded-4810-a3be-794f6c4830a4?msgId=2bd7082f-f5d1-4b01-8c70-e0d2a754d66f&page=1<o:p></o:p>
The problem: The mouse pointer becomes unchangeable in size, type, trails etc when 100% scaling is used. As in it reverts to the standard small white non-inverted, no trails,
no shadow 'pointer', no matter what options you select in the 'Mouse' control panel settings.<o:p></o:p>
This appears to be a scaling problem with the Windows 8/8.1 display, not an actual mouse problem. Judging by my own and other peoples experience it seems to happen mainly with multi
monitor setups where different screen resolutions are used. The issue occurs typically when 100% scaling for all monitors is used or this option is un-ticked and the 'change the size of all items' is on smallest (equivalent to 100%). <o:p></o:p>
If the scaling is set to 150% or greater the issue disappears and the mouse pointer becomes fully functional. Also bizarrely when the scaling is set to 100% if the screen is recorded
using a screen capture program, the recording of the screen shows the mouse pointer selected in the mouse options and not the default small white cursor that is present when recording it. Here is a link to a video where I explain and show the problem
happening on my system. http://youtu.be/xs2cxoeaq-A<o:p></o:p>
I have every update installed without exception, latest drivers etc. I use a 55" 4k screen with 2x1080p monitors in portrait on either side. All are connected through 1 Nvidia
GTX 780 6GB graphics card<o:p></o:p>
Hope you can help us<o:p></o:p>
thanks<o:p></o:p>
Jon M<o:p></o:p>

Hi Jon,
I'm looking into this issue but it will take me some time to provide a reply.
In the meantime I noticed that you have 3 monitors with 1x 55' and 2x27' - please have a try to only connect 1x27' monitor and see if issue persists.
Also please try to change the screen resolution to a lower size and see if issue persists.
Both suggestions are not solution, I just would like to know if it is related to multiple monitor or screen resolution.
If you have any feedback on our support, please send to [email protected]

Multi-monitor application switching bug in Windows 8.1

In the latest 8.1 update, we got some better features here and there, but using metro apps seem to break multi-monitor setups.
In certain circumstances, the cursor will get "caught" between screen edges, as if the metro app-switcher or charms bar were open.
There's no one way to reproduce this bug, sometimes it happens and sometimes it doesn't, but it usually starts to happen when switching from a metro app to the desktop on the main display via the top-left hotcorner.
This may also happen in many other circumstances involving metro apps or the hotcorners or anything like that. I have not had a problem involving the start screen so far. Getting rid of it (temporarily) is just as finicky as reproducing the issue. I really
have no idea what makes it go away, but switching back and forth between apps using different methods (hotcorners, taskbar, metro minimize/close buttons) seems to get rid of it until you interact with apps again.
I have an AMD r9 280x and 2 1080p displays. I am not using eyefinity. I am running Win 8.1 Pro updated to the latest 8.1 update where there are metro apps on the taskbar.
Needless to say, this is very annoying. If I can't smoothly move my mouse cursor between screens, it really interferes with a dual/multi screen setup. With all the people with multiple screens, I'd expect more people to have run across this problem, so if
you need more information to identify whether this is a software/OS issue, let me know.

In certain circumstances, the cursor will get "caught" between screen edges, as if the metro app-switcher or charms bar were open.
That's not a bug. It's a feature. Unfortunately there is no GUI support for it. And evidently there needs to be a training dialog, in the same way that there is one for Flicks. Search for "Escape Velocity"...
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_update/issue-with-dual-monitors-after-windows-81-update/30431433-32a7-48e7-853e-f6f391f5fa3e?msgId=2139704d-c2d2-44e6-b466-452769e7fdbf
That's strange. They called it Escape speed? Implying direction doesn't matter? <eg>
Robert Aldwinckle

Multi-Monitor PSE 9 Corrupt Display

Multi-Monitor PSE 9 Corrupt Display
Evening all -
First post here at PS Gurus. I hope that you guys can lend your expertise in pinning down an issue that I am having and have also had on other PS versions. I am running
Windows 7 (64 bit) Ultimate
2600k / 8 gb ram / 256 Samsung SSD / 460 GTX 1GB
Matrox Triplehead 2 Go with x3 22" monitors (resolution 5040 x1050)
A fresh install of the trial version of PSE 9 is yielding corrupt main toolbar and options bar (for each tool selected). The application is expanding full screen on all three monitors just fine but the toolbar are corrupt - partly transparent / party compressed to the left. No matter what I have done in terms of resizing the application window the results are the same or get worse.
On another computer I installed PS CS5 (also under win7 64 bit environment) and I was having the same issue. However, at the time I thought the install was bad in some shape or form so I dropped the issue.
I am now considering PSE 9 but see that Win7 + Matrox just isn't working correctly with this combination of hardware / software components.
Has anyone see this issue or know of a potential fix? I have read a couple of threads on the net with similar issues but I don't see any resolution. Your help is greatly appreciated.
Thanks-
Benjamin

My main reason for testing PSE-O 9.0 was to find out if this "bug" was fixed. I can not use PSE-O to organize and show pictures the way I want to with this weaknes in place. Your answer is probably correct, bun not at all helpfull.
So thank you for trying, but my test of PSE O is over for now.
Does anybody out there know of other products that will do the trick?

LabVIEW crashes when you run a VI that contains a mixed signal graph with a multi-plot cursor.

Hello, LV 8.2.1 notes indicates the following bug fix:
43SAIR2A Fixed an issue where LabVIEW crashes when you run a VI that contains a mixed signal graph with a multi-plot cursor.
I am running this version, and still have this behavior. Is there anything I may be missing, and/or certain circumstances that may still be causing this?
thanks in advance,
Darren

Darren:
I looked at the CAR ID that you mentioned and the issue has been resolved in LabVIEW 8.2.1. To verify something similar, I ran the attached VI and things worked just fine. Please feel free to send me the steps to follow to reproduce the issue you are running into in 8.2.1.
Regards,
Rudi N.
Attachments:
MixedGraphs.vi ‏15 KB

Multi plot cursor

Dear All,
I am working on Mixed Signal Graph with Multi plot cursor.
My target is to move the cursor on X axis time scale and get the y axis values of all the plots.
i got some ex. on forum but i am facing a typical problem explained as follows:
By chaning the cursor plot i am getting the y axis values for each plot.
The problem is that the values are continuously changing of the plot y axis value automatically, ans also the values of the respective plot does'nt match all the time, it changes.
I have attached a example, in that the values of the respective plot changes every time.
Am i missing anything, please guide.
Regards,
Shrek
Attachments:
Mixed Signal Cursor.vi ‏34 KB

Here is a quick mod .. don't know if it solve your problem, but I get constant values
Will work only if all plots have the same lenght ...
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
Attachments:
Mixed Signal Cursor.vi ‏27 KB

Multi plot cursor in Mixed Graph

If Digital waveform and normal waveform graph is plotted in a mixed graph, and if I choose watch all plots(multi plot) in cursor, LabVIEW closes immediately with an error popup dialog
I have attached the print screen image of that error popup
Attachments:
error.JPG ‏188 KB

Hi Stephen,
           I found a considerable solution to overcome that error.
           Build all the array data at first and then generate digtal
waveform in single instance.
           ie., With number of numerical array data, build a 2D array of
numerical data and make a transpose and then generate a waveform.
           It generates number of digital waveform equal to that of the
column size of 2D Array.
           Do not build generated digital waveforms. This creates an error
while using multi plot cursor--> watch--> All plots.
           I have attached the modified, bug removed Vi with this message for
your reference.
Regards,
Raja
Project Engineer
Soliton Technologies
www.solitontech.com
Attachments:
Mixed Graph Modified without Error.vi ‏25 KB

Multi-plot cursor in xy graph

I am using an XY graph with 5 curves which belong to one of two y axes each. All curves share the same array of x values. I do not like the cursor legend so I want to read out the values of the one cursor programmatically. I can create a multi-plot cursor which watches all the 5 curves but I cannot find how I can read out the 5 corresponding y values of my cursor. Any help?
Thanks,
LX (using LV2014)

Use the cursor index property value and wire that to an index array function for each y array.

Mixed Graph - Multi Plot Cursor Problem

If I plot both Analog Waveform and Digital Waveform in a single Mixed Graph, and when I choose watch all plots in cursor legend, LabVIEW crashes with an error message.....
I have also attached  the Print screen image of that Error
Attachments:
error.JPG ‏188 KB

Jared Boothe,
           I found a solution to overcome that error.
           Build all the array data at first and then generate digtal waveform in single instance.
           ie., With number of numerical array data, build a 2D array of numerical data and make a transpose and then generate a waveform.
           It generates number of digital waveform equal to that of the column size of 2D Array.
           Do not build generated digital waveforms. This creates an error while using multi plot cursor--> watch--> All plots.
           I have attached the modified, error free Vi with this message for your reference.
Regards,
Raja
Project Engineer
Soliton Technologies
www.solitontech.com
Attachments:
Mixed Graph Modified without Error.vi ‏25 KB

Uix 2.2.8 multi monitor related bug

Hi,
I have a multi monitor system, on the seconnd screen, there is the browser , showing a page which has a Date Picker and a LOV. If I click on one of the icons, the window opens, and then all of a sudden jumps to the first screen with IE, with Mozilla it already opens on the first one. Same screen would be nice though.
Bye Jan

Hello Jan,
In the UIX javascript code the newly opened window's coordinates are checked to make sure it is not partially off the screen. If so, the window's coordinates are adjusted to put it on the screen.
I think there is a bug in IE which doesn't treat the multi-monitors as a single monitor, or something like that. Unfortunately, I doubt we can do anything about this.
Are you saying it works in Mozilla, correct?
Thanks,
Jeanne

Multi monitor on xp partition

I'm having a problem with setting multi-monitor for the xp side partition. I use xp most of the time and having problem with the multi screen.
please help
thanks guys

i got it working finally

Multi Monitor - different Screeen Saver for different monitor - Setting for notebook computers...

Hi,
I have a question about the multi monitor, screen saver setting for Windows 7. I'd like to know 2 questions.
1.) if I can set different screen saver settings on different monitors
2.) If I can do it, can I work on the external (or non-primay) monitor, when I have the primary monitor with "blank" screen saver?
Basically, I put my notebook computer at the docking station at work, and the docking station is connected to a 22" monitor, desktop keyboard and mouse. So, at work, the 22" monitor and K/B would be my primary use. However, I still "flip"
open the notebook monitor for dual monitor use.
I'd like to "save" the notebook monitor when I don't use it for 30 min. or so... I'd like to "power" it off or set it so that it would only turn on if I move my mouse to that screen.
Is there a way to do it?
Thanks

Hi
There isn't any way to do what you are describing.
The reason is that both monitors have the same source for the video. You can extend the video to the second monitor, but this just gives you more screen space.
The screen saver will only display on the monitor that is set as the default and when the screen saver starts, the other monitor will be blank.
Hope this helps.
Thank You for using Windows 7
Ronnie Vernon MVP

Multi-monitor SW is affecting VMware performance on Helix

I have discovered that running multi-monitor software like Matrix desktop management is affecting the VMware Workstation 10 guest performance so drastically that virtual machines become literally unusable. Similar experience is reported by other people using different multi-monitor software like DisplayFusion, see https://communities.vmware.com/message/2315099#2315099
ThinkPad W520, i7-2820 CPU, 32GB RAM, NVidia Quadro 2000M 2GB GPU , mSATA Samsung Evo 840 1TB + 2x Samsung SSD EVO 840 1TB & Lenovo Helix i7 8GB RAM & ThinkPad W540, i7-4800MQ, 32 GB RAM, NVidia Quadro K1100M, OS on M.2 2242 Transcend MTS400 256GB + 2x Samsung SSD EVO 840 1TB

Ray, it will do a lot more good if you file an official bug report at http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Be sure to describe the configuration in extreme detail.
Peter

ATI card + OS driver + multi monitor

Hello everyone,
I'm stuck configuring the RadeonHD drivers for multi monitor setup. The system starts with both screens cloned; logging in is in clone mode too. After that the second display is being turned of (no signal). Using xrandr --auto will enable the second display to life and clones the sreen again. xrandr --output DVI-I_1/analog --left-of DVI-I_2/analog will create a big desktop only the second display can only be used for a half screen mouse will go further anything else will not.
I've started with a autogenerated, by xorg, xorg.conf file and tweaked to the one below
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "glx"
# Load "dbe"
# Load "dri2"
# Load "extmod"
# Load "dri"
# Load "record"
EndSection
Section "Monitor"
Identifier "AL1916W"
VendorName "Acer"
ModelName "AL1916W"
DisplaySize 1440 900
EndSection
Section "Monitor"
Identifier "AL2016W"
VendorName "Acer"
ModelName "AL2016W"
Option "RightOf" "AL1926W"
DisplaySize 1680 1050
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # 
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # 
Option "monitor-DVI-I_1/analog" "AL1916W"
Option "monitor-DVI-I_2/analog" "AL2016W"
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RV710 [Radeon HD 4350]"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
# Monitor "AL1916W"
SubSection "Display"
Depth 24
# Virtual 3840 1920
EndSubSection
EndSection
My Xorg.0.log shows the line (WW) RADEONHD(0): Option "monitor-DVI_I_2/analog" is not used wich puzzles me!
Information:
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
xrandr program version 1.3.2
Server reports RandR version 1.3
xf86-video-radeonhd 1.3.0-1
If more information, from Xorg.0.log or anywhere else, is needed just ask....
Thanks in advance,
Arjan Gelderblom
Last edited by Bloged (2009-12-14 10:02:05)

Sorry for the delay, but I was away for the weekend!
Andrwe wrote:Please try setting the bigger one monitor right-of the small one.
xrandr --output DVI-I_2/analog --right-of DVI-I_1/analog
This doens't change much except that now the smaller monitor has the problems!
litemotiv wrote:try using xf86-video-ati instead of radeonhd. i tried to get xrandr working for over a week having exactly the same problem, ultimately switched drivers and had everything set up in ~10 minutes.
Changed to ati instead of the radeonhd drivers still gives the same error!
Eratosthenes wrote:
I think you need to set a valid virtual size in your xorg. I think the one you have commented out is too large.
Mine is:
Subsection "Display"
Virtual 3200 1200
EndSubsection
Changed see new xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "glx"
# Load "dbe"
# Load "dri2"
# Load "extmod"
# Load "dri"
# Load "record"
EndSection
Section "Monitor"
Identifier "AL1916W"
VendorName "Acer"
ModelName "AL1916W"
EndSection
Section "Monitor"
Identifier "AL2016W"
VendorName "Acer"
ModelName "AL2016W"
Option "RightOf" "AL1926W"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # 
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # 
Option "monitor-DVI-1" "AL1916W"
Option "monitor-DVI-0" "AL2016W"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RV710 [Radeon HD 4350]"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "AL1916W"
SubSection "Display"
Depth 24
Virtual 3120 1050
EndSubSection
EndSection
Andrwe wrote:BTW could you please sent teh log, maybe there is something you may have missed.
Because of the switch to ati from radeon the log is different now... but here it is: http://pastebin.com/m77d0ea0b
This one at least shows that my seccond monitor is connected which failed in radeonhd!
Thanks for all the help,
Arjan Gelderblom
Edit: changed topic title to have it apply better to it's content
Last edited by Bloged (2009-12-14 10:02:47)

Multi monitor cursor swapping

Similar Messages

Maybe you are looking for