Multi-monitor viewing

Suggestions or comments for viewing multiple pages horizontally across multiple monitors? Would like to setup 2-3, maybe four pages horizontally.

John Hawkinson wrote:
[..] Alternatively, you can put your pages in seperate INDD files and open a seperate window for each.
You can open a new window for your document -- even more than one, if you really want to (I imagine there will be some slowness after the first dozen).
The nicest thing is each window represents a live view on your document. If you are viewing the same page in two separate windows, you will see all changes immediately in both windows.

Similar Messages

Multi Cam View

Perhaps someone can explain what is happening... I have a 2 camera edit.... Both cameras are synced on timeline. I dragged them into a new sequence - enabled multi cam and then opened the multi cam monitor. When I right click on timeline video, I see the two cameras and can select either one. But for whatever reason, in the multi cam monitor view, the 2nd cam does not show... it is there, but the image does not. I only see the video from cam 1. I have closed and reopened Premiere - did not work.. I opened up other similar projects, and the 2nd cam is there in multi cam monitor, but in the current project I am working on, I cannot get the 2nd cam to show in the monitor... I am baffled... I am using CS5 on a Windows 8 computer.

Actually, I decided to start over, recreate the embedded multi-cam sequence and this time in the pop-up window I selected the option to create sequence from all cameras. For whatever reason it worked. I hope this helps.

Multi monitor issues with resolution(?)

At a customer I have got a really strange and annoying problem. The customer has got a Hyper-V VM with 2012 R2 Server as a RDS server aka Terminal Server.
One user has got issues with his multi monitor setup. The connection settings seems to be OK. It is set to full screen and the checkbox for the multi monitor configuration is enabled. Theoretically this works because the user sees a correct setup with one
primary display and one secondary display. The settings itself are correct.
1. Primary display: 1680*1050
2. Secondary display: 27" 1920*1080
The display settings on the client are nearly the same except that the numbers of the two monitors are different (those numbers you get when you click identify at the resolution change window). On the Windows 7 client the primary display
number 2 and the 27" has got the number 1. On the Terminal Server the primary display has got the number 1 and the 27" display has got the number 2. But the corresponding resolution at the display number is correct.
Now the problem. Everything seems fine, the desktop is expended. But when the user is "touching" the top or bottom edge of the screen the display is scrolling (in full screen) - like in a 3D game scrolling over a map. The user told me that
both screens are scrolling equally at the same time. I am not sure but the user told me that if he is going to the bottom the CLIENT task bar appears. Changing the task bar of the client to fixed the user told me that the task bar will always show up. - Strange
that CTRL + ALT + BREAK does not work.
I tried to press CTRL + ALT + BREAK twice, changing the resolution to a fixed value and back to full screen again, changing the primary display to the new 27" monitor, adding smart sizing:i:1 to rdp file and upgrading the Intel HD
4600 laptop graphic drivers (must be downloaded from Lenovo :/). NOTHING helped :(.
But this strange behavior does not exist on the client. Opening two programs (simple notepad e.g.) on each display and maximize them and moving the mouse the screen borders won't show this problem. It only exist on the remote session.
Now the "funny" part. If I connect with Team Viewer to the client the problem disappears as long as I am connected. If I disconnect the problem shows up again.

Hi,
This is most likely a problem with the local machine's graphics driver and monitor configuration. I would suggest trying different things like removing and re-installing the display adapter and its drivers, removing the second monitor/restarting/adding
the second monitor back, adjusting the multi-monitor settings in display properties (changing between extending the desktop to the second monitor and not), undocking/restarting/docking, changing between different modes using Fn key on laptop (if laptop), etc.
The behavior under Team Viewer is likely because the graphics configuration is different when the driver is active.
I wish I could give you more precise instructions on how to resolve the issue. I have seen this behavior (panning desktop, multi-monitor config not exactly right) probably 3 times over the last 5 years, always with a laptop, and I had to "play"
with the settings before it finally went back to normal. The instances I have seen it occur did not involve Remote Desktop specifically.
-TP

Help Improve Premiere! FR: Separate, maximizable Multi-camera view

Do you ever use Premiere CC's Multi-Camera tools? Then this FR is for you!
Please copy/paste as your own and send to https://www.adobe.com/go/wish/. Every voice counts!
*******Enhancement / FMR*********
Brief title for your desired feature: Separate windows for Multi-camera view and Program Monitor, with ability to tilde toggle to full screen either or both.
How would you like the feature to work?
The Multi-camera view and the Program Monitor should occupy separate, individually resizable and maximizable windows.
Why is this feature important to you?
The way these interface elements are currently squeezed into the same window is extremely limiting as far a viewing options. When the Multi-camera view is displayed, users can no longer do a full-screen preview of their edit, nor can they do a full screen preview of their multi-camera angles. This is unnecessarily restrictive. By putting the Multi-camera view in it's own window, and allowing it to be tilde maximized to full screen, users would have so much more flexibility for viewing their camera angles and their final edit while editing multi-camera sequences.

Hi Kevin,
I'm not sure how sticking the Multi-Camera View together with the Program Monitor does anything to clean up the interface. But supposing it does somehow, how can the person responsible for this change justify 'cleaning' the interface at the tremendous expense of functionally?
The current design simply isn't functional as already stated:
Full screen preview can't be used for the Program Monitor and/or the Camera Angles.
The Camera Angles can't be positioned and resized independently on their own monitor. Ditto for the Program Monitor.
How could the PP team miss this? Sorry to be brash, but it just baffles me how an entire team of adults can commit such an obvious gaffe. Perhaps they need to screen their ideas past real users, users like me that think outside the box and speak up when things don't work. For sure Adobe already does this, but it clearly isn't working, either because they're consulting the wrong people and/or they're getting the right feedback but aren't listening to it.
When I have to multicam edit on my laptop, I would LOVE to be able to display ONLY my camera angles in Full Screen. This would make each camera angle a usable size on a 17" laptop, and leave out any and all distracting interface elements (something helpful on any size monitor). After my initial edit is finished, I could then scale down my Multi-camera View and place it next to my Program Monitor above my Timeline to refine the edit. The current design makes this logical approach impossible.
I was REALLY hoping to see this fixed in 7.2. The problems with the current design are so painfully obvious to me, every single time I do multicamera editing. IMHO, it should also be obvious to anyone that trully understand video editing.
You wrote "this appeals to some and not to others.", but for the life of me, I can't see how this change could possible appeal to anyone (other than a sadist that gets pleasure out of seeing an editor's workflow getting screwed).

Any 3rd party utilities that fix full screen mode for multi-monitor users?

I am a multi-monitor user. As multi-monitor users know, full screen mode is basically useless since if you try to go full screen on one monitor, it causes the other monitor to go blank and become unusable (at least with most programs). Are there any 3rd party utitilities or fixes for this?
Thanks

Spaces, which is what this functionality stems from, was limited in that it used your entire setup and switched all of the screens over; space to space. I never used spaces because I always had multiple monitors and I was always working with multiple apps simultaneously that I wanted to be able to reference while working on the others.
Now they call Spaces, "mission control" and changed the appearance of it, but the functionality remained the same, each workstation comprised all of your monitors, and would switch over all of them when switching to a new "Desktop".
Fullscreen apps wrongly assumes that it can take the functionality of the afformentioned MS/Spaces and use it for one app, negating the whole idea of why someone would have multiple screens (real estate to work with other applications).
If they stop considering multiple monitors as one Workspace, they can then make it so they are asynchronous "tablets" instead of one conjoined entity.
So, you say people have been asking about this for 2 years, I've been asking for this for 5!
The issue here is, the only answer is to not use it. Making Mission Control and Fullscreen apps completely ignored by people like us, where I could be using both functions to glide around my work station and three monitors, mixing and matching which apps I want to be viewed on each separate monitor, to perform one single task; together.
It would actually reward people who wanted to utilize Thunderbolt technology and have more then one monitor.
There is no telling why apple chose to push out something that would only support the casual user, with one display, but the only direct way to let apple know that we feel limited by the OS is to send feedback. Even though it seems that we are powerless in this situation, I hope that they do consider how to make this function better.
</rant>

Dual/ multi monitor

I would like to see more options for dual monitor setups with Win7.
Here is my situation. My primary monitor is 4:3 and my secondary monitor is widescreen. I use the primary monitor for opening windows explorer and my secondary monitor for viewing. When viewing movies, I like to set the secondary monitor to landscape mode and when viewing docments and browsing I like to set the monitor to portrait mode.
I've used ultramon with Vista but that has lots of problems. Heres are some stuff that I would like to see implemented.
- Be able to make monitor/display profiles with shortcuts in the taskbar (to switch from single to dual, landscape vs profile).
- Create a move window button to move open window from one monitor to the other.
- Be able to use different wallpaper for each monitor, would be nice if it can be attached to display profiles.

Hello,There has been talks of Multi Monitor support by Microsoft. For information as to what was said refer to this Blog entry.
As for a list of the useful HotKeys check out this topic here. They have quite a few of the new hotkeys listed there.
Regards, ~Alex T.~
~Windows Desktop Experience MVP~

How do I avoid errors on a Multi - monitor setup?

Hi.
I want to use Photoshop CS6 on a Multi - monitor setup, using iGPU multi-monitor + GPU system for 4 monitors.
Preiously, I used Photoshop on a Multi - monitor setup without useing iGPU multi-monitor.
And, Photoshop worked well.
However, when I wanted to use 1 more monitor, my GPU supports only 3 monitors.
Then, I enabled iGPU multi-monitor function. It supports 2 more monitors.
At first, It worked. But, after I use "Free transform", "Transform" or something like these tools, Photoshop hang up!
I couldn't figure out the reason why these errors happened.
I need ways to avoid these errors.
Thanks.

Thanks for viewing this discussion.
Finally, I brok through this problem.
I show you how to do, in case of when you face to this problem.
The way to solve this problem is, simple, "buy a new GPU."
But, there is 1 important point, you should buy a same bland's GPU.
In my case, I have SAPPHIRE'S RADEON HD5670, and I bought SAPPHIRE'S RADEON HD 6450.
I think that Photoshop GPUsniffer was confused about GPU driver.
Because there were 2 drivers -- Radeon and Intel Graphics -- exist.
That's why Photoshop hang up.
For your reference,
Best regards.

Multi-Monitor PSE 9 Corrupt Display

Multi-Monitor PSE 9 Corrupt Display
Evening all -
First post here at PS Gurus. I hope that you guys can lend your expertise in pinning down an issue that I am having and have also had on other PS versions. I am running
Windows 7 (64 bit) Ultimate
2600k / 8 gb ram / 256 Samsung SSD / 460 GTX 1GB
Matrox Triplehead 2 Go with x3 22" monitors (resolution 5040 x1050)
A fresh install of the trial version of PSE 9 is yielding corrupt main toolbar and options bar (for each tool selected). The application is expanding full screen on all three monitors just fine but the toolbar are corrupt - partly transparent / party compressed to the left. No matter what I have done in terms of resizing the application window the results are the same or get worse.
On another computer I installed PS CS5 (also under win7 64 bit environment) and I was having the same issue. However, at the time I thought the install was bad in some shape or form so I dropped the issue.
I am now considering PSE 9 but see that Win7 + Matrox just isn't working correctly with this combination of hardware / software components.
Has anyone see this issue or know of a potential fix? I have read a couple of threads on the net with similar issues but I don't see any resolution. Your help is greatly appreciated.
Thanks-
Benjamin

My main reason for testing PSE-O 9.0 was to find out if this "bug" was fixed. I can not use PSE-O to organize and show pictures the way I want to with this weaknes in place. Your answer is probably correct, bun not at all helpfull.
So thank you for trying, but my test of PSE O is over for now.
Does anybody out there know of other products that will do the trick?

Multi-track view option to save selection of mulitple tracks

Hi, I'm not sure if there is another way of doing what I am doing but if there is please tell me! ... If theres not then this should be a valid enhancement request for a future release ... This is what I am currently doing to create samples: Working in Multi-track view I am making a selction accross tasks and then when I am happy I write down the begin and end of my selection. For a 5 minute piece thats alot of writing down! ..(I have 50 or so numbers) .. I then switch to edit mode for each of the tracks that I want. I then punch in the numbers to make my selection and use the save slection option to save the sample to my folder typing the numbers into my filenames so I can keep track! ... In order to get the samples I want from a typical 5 minute piece it can take me days and is very soul destroying! ... So .. to my enhancement request .. once the selection is made in multitrack view it shoud be possible to save all selections as seperate samples using a file naming convention made up of the track name and the begin and end numbers... QED ...This would be brilliant! .....menawhile, back to the slog until someone puts me out of my misery! ...alan

Alan [good name],
You could try selecting your range (maybe place markers at each end),
then File | Export | Audio Mix Down.
Choose TRACK as your source and SELECTION as your range.
Each track (and the master) will be mixed down and saved as separate files.
Rather than renaming all the files, consider putting them
into a new folder - which you can name appropriately.
Of course, using this method all effects, levels, etc. are
applied before saving.
I agree that a more direct approach is desirable,
but if you can live with mixed down files, this will help.
Alan

How do I remove display of attendance quota in Multi-Day view in TMW?

Hi,
I have just created an attendance quota and am seeing it every day in the multi.day view of Time Manager's Workplace.
I would like to remove it from being displayed in that part of TMW. Can anyone help me?
Thanks in advance
Kim ;-)

You can try using the Device and Credentials Repository command line interface (dcrcli). Instructions for its use care located here.
If the issue is with the Fault tool (also known as DFM) then please see this thread about re-initializing the DFM databases.

Possible?Multi-Entity View Object with one Entity Object that is Read-only.

I know this sounds crazy, but I would like to create a multi-entity view object, where one entity object is based on a table in my application (we'll call it "Users", which basically stores the primary key for the person from the institutional people database), and the other table is a entity object based on a view of the institutional people database table (read only access), which we can call "People".
I know that since no updates will be done to the People table, it really should be a read-only View Object, but I would lose the ability to sort on attributes like Last Name, Hire date, etc, since those would be transient attributes in my ViewObject for the Users. By having People as an entity object, I can then create a multi entity view object and have the ability to join Users to People and be able to sort on the above mentioned fields (like Last Name).
The problem is that when I use the JDev (I'm currently using 10.1.2.1) AppModule BC4J tester, when I click on the multi-entity view object that I added to the AppModule it gives me an error:
oracle.jbo.RowCreateException) JBO-25017: Error while creating a new entity row for People.
----- LEVEL 1: DETAIL 0 -----
(java.lang.InstantiationException) null
I have tried to change all the attributes to updateable in my entity object, but no create method, and I have tried to make them all read-only, but no effect, I get the same error (probably because the People view is read-only in my schema).
Is there a way to change the entity object so that it will not try to create a new row when it runs the Tester? So that the multi entity view object behaves more like a view link, but gives me the added bonus of being able to sort on the Last Name column from the People table?
Thanks for any help on this subject...at worst, I will have to use the view link method to get the job accomplished, but it would be "cooler" if this would work!
Jeremy.

Steve, thanks for your quick response to my question.
To answer your questions, I was trying to create the Multi-entity View Object to give me more flexibility when working with my User table, and my People view. The flexibility I desired was that I would be able to sort my Users based on attributes in the People view. This is not possible when the there is only one Entity in my VO, and the People view data are all transient attributes, because they are not in the SQL statement.
Ultimately, after working with one of my colleagues, we decided to use the approach that you mentioned by creating a read-only VO with the SQL query we want to display to the user (contains both User and People data fields), and then use a different ViewObject when performing other actions on the User Table (such as inserts/updates/deletes). By using the setWhereClauseParam() method in the handleLifeCycle() for the JSP page, we should be able to navigate between the different View Objects, so that the user does not see any difference.
Thanks! Oh, and by the way, I have read your article you included before, and I have used it many times before to tune my View Objects! Thanks!

External Monitor Viewing - ALL FRAMES Unchecked

Hello FCP gurus
I cannot get a video signal on my external monitor.
For some reason I have lost the ability to check the ALL FRAMES option in the View Menu under External Video. Each time I click ALL FRAMES it stays in the OFF mode. I think this may be the reason for the external picture loss? I have also just relocated my edit suite so somewhere in the move I might have upset the 'workflow'. Not sure, can't see why? Before today I was getting an external picture no problem.
The configuration I have is: A Firewire connection from the Hard Drive to a DV Cam (PD150). RCA Vid connector from the cam into a domestic TV.
I have followed all of Shane's #8 Stock Answer and still nudda!!
Can anyone help?
Thanks in advance!
josie
P.S. I work in Pal
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane
G5 Mac OS X (10.4.8) FCP 5.1.2

Heck, I don't know, but reading your question helped me to finally figure out how to get my external monitor working.
Would it be okay to add to your question. Now that I have mine working the audio goes through the monitor instead of my nice Cerwin-Veg speakers. Is there a way to fix that?
P.S. Have you tried a power down, hooking up the monitor and then coming back up?

Unable to See Camera Angles in Multi-Camera View

Hello Adobe Community,
I seem to be missing the ability to see my camera angles in Multi-Camera view as you can see in the picture below.
I feel it may caused by me trying to get Adobe Encore to work. I have been trying to get Encore by installing and un-installing an older version of Premiere CS6 with no success. On a side note, Premiere Pro CC 2014 crashes on launch.
I'm running Premiere Pro CC on a MAC running OS X version 10.9.4 with 3.4 GHz Intel Core i7 with 8GB 1333 MHz DDR3.

Hi Sascha,
No i cannot see the buttons either.
Following is how the view is embedded.
View - > Tray - >viewcontaineruielement-> wnd_selection_screen.
Am i missing something?
regards,
Priyank

Uix 2.2.8 multi monitor related bug

Hi,
I have a multi monitor system, on the seconnd screen, there is the browser , showing a page which has a Date Picker and a LOV. If I click on one of the icons, the window opens, and then all of a sudden jumps to the first screen with IE, with Mozilla it already opens on the first one. Same screen would be nice though.
Bye Jan

Hello Jan,
In the UIX javascript code the newly opened window's coordinates are checked to make sure it is not partially off the screen. If so, the window's coordinates are adjusted to put it on the screen.
I think there is a bug in IE which doesn't treat the multi-monitors as a single monitor, or something like that. Unfortunately, I doubt we can do anything about this.
Are you saying it works in Mozilla, correct?
Thanks,
Jeanne

Multi monitor cursor swapping

I've got three monitors lined up and I'm looking for a way to instantly center the cursor on a specific display to avoid dragging it everywhere. I know there's a software called Multi Monitor Mouse for Windows which is supposed to handle that pretty well. So do you guys know a corresponding software or script for mac or is it possible to run the win. app in OS X via 3rd party software?
/Erik

Is the question clear or should I rephrase it?
I need a keyommand to move the cursor from one screen to another.

Multi-monitor viewing

Similar Messages

Maybe you are looking for