Multi-monitor window wont stay put :(

so i have 4 monitors, 3 of which are together and 1 off in another area for other stuff. this is done w 2 standard apple video (Nvivia GT120) cards and a few monitors. the middle one has a higher res than the others but not so much to need the dual dvi.
i want to display the mixer window across all 3 of my main monitors for a full overview in that particular screenset.
the PROBLEM here is that as soon as i switch to another screenset or even select that same screen set while viewing it, the mixer window snaps to allignment w the center monitor so that the left monitor has nothing on it and the right half of the mixer window has fallen off the right screen.
it works just fine when i only spread the mixer across two monitors. but even then sometimes it alligns to the center monitor after while.
is there some setting im missing here?
thanks!

Locking? The whaaaa!? I'll probably never stop learning this program. I'll look that up and check it out, thanks.

Similar Messages

CS6 synchronize window not staying put

Most frustratingly the CS6 synchronize window is not staying where its put. This used to work just fine in CS5. I tried saving the screen layout while it's open as well. Each time it comes up in some default position and I have to move across monitors and expand the window where I want it to sit. Anybody else having the same issue? Any solutions? Can you please fix this Adobe in the next release? Thank You.

I haven't made the switch to CS6 yet, so I don't have any experience to add either way, sorry.
As far as getting the info to someone within Adobe that could make a difference if it's a bug in CS6 (and not just some kind of conflict on your machine), make sure to report your bug here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
The actual Adobe tech support folks rarely come into the user forums and may never see your post.

Multiple Computer Monitor Screensets Not Staying Put

I've created 7 screensets, each distributing various windows onto different computer monitors (I have 3 monitors and a lcd tv attached to my computer) to speed my workflow. Each time I open my LPX file, all the open windows of each screenset are stacked top of each other on my main screen, instead of where I put them. I've tried locking them which keeps them in place until I reboot the computer, then they're all in stacked in the main window again.
Is anyone else experiencing this problem?
Anyone have any ideas on how to fix it? I've tried reinstalling LPX, trashing the pref file, but no luck, the problem persists.
I am currently trying to use 10.0.3, but the problem has been there since I updated to X when it was released. I still have 9 on my computer and it is working fine. I had no problems with this in any previous logic version until now. Thanks.

I did a fresh install of Mav and LPX on an external HD and booted from it... to test out the combination and so far, so good. No major issues of note.. A few niggling OS X bugs that I can work around, (not related to LPX and it's use I might add.. ) but such minor bugs are not unusual with a new OS version... All my external hardware (Motus) work fine with the current, latest drivers although Motu do have a new beta driver specifically for Mav ready to go....but so far, I haven't come across anything of issue with the current ML drivers... All my plugins are working just fine too.
As for my main working rig... Whenever there is a major upgrade to the OS I always install from scratch... and even though I could simply upgrade the previous OS to the new one.. I have found through bad experiences in the past, that it is better just to start again from fresh to minimize issues.... I keep my major sample libraries on a separate HD so at least i don't have to reinstall those.... just the plugins like Kontakt and 3rd party FX and SIs...... It can take a couple of days to achieve all this (I have all the current versions of plugin installers stored on another external HD ready to install from which speeds things up a great deal) but for me, the time spent to do it this way, seems to always pay off in terms of the lack of issues going forward.
I do upgrade one of my test rigs rather than start from scratch.. just to see what happens in case there are any issues related to doing so, that my clients might face.... but I will only be doing that when the App Store version is actually released... as even though i don't expect any changes to be made to the Gold master version of Mav at this stage... the installer itself can change so I wait until it is released to the public... and use that version, just in case.
So, I haven't come across anything 'bad' using Mav and LPX..... and some things.. like the way Mav handles multiple monitors.. are greatly improved for sure...Overall performance in both LPX and other OS X apps seems snappier under Mav... in particular those apps that made heavy demands on the graphics sub routines. Also, after waiting for almost two years now.. a long standing bug regarding the use of the Thunderbolt to FW adaptor and a problem when the display goes to sleep, has finally been fixed resulting is stable connections to my FW800 Ext HDs and FW400 Ultralites.. which for me is a real bonus and benefit of using Mav!

Help! My ipad mail window wont stay open to read mail?

ipad has been sending & recieving mail with no problems but suddenly is recieving mail but when mail window keeps shutting down & won't stay open??? Any ideas???

It won't be a virus
Have you tried closing the Mail app completely ? From the home screen (i.e. not with Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Multi Monitor - Windows Key + Left/Right not working?

Hi everyone,
Just checking whether it's just me or other people having this issue (I can't find a similar thread for the Windows 10 Technical Preview).
Windows Key + Left/Right does not seem to snap to another monitor. On my setup it continually cycles on the monitor it's already on (Left/Mid/Right), but does not jump across to the next monitor when it hits the end.
Is this an intended change in the Technical Preview? Is anyone else having the same behaviour? If not, any suggestions on troubleshooting it?
Thanks!

Apparently this is an intended part of the new virtual desktop system. It also affects the Shift-Win-Up maximizing the window, and Shift-Win-Down minimizing it... they now function with a double-tap of the Up or Down. But unfortunately Shift-Win-Left
or Right will just move around on whichever single screen the application is now on, regardless of how many monitors you actually have.
Just to clarify, do you mean the feature to snap/cycle to other monitors was intentionally removed? Or due to other changes to snap it's had this adverse affect?
The ability to Windows Key + move to other monitors is highly useful, and often much quicker than dragging/dropping to move to another monitor. I hope this is just an oversight and will be reverted!
Thanks to others for your feedback and info too, glad to know I'm not the only one encountering this issue.

DPI Scaling on Multi-Monitor (Windows 8, 8.1)

Hi, I have two monitors, one internal and one external, configuration goes as follows:
MacBook Pro (Retina, 15-inch, Mid 2012) Native display/monitor
2880x1800px
15.4"
221 PPI/DPI
Detected by Windows as: "Generic PnP Monitor"
LG D2343P External Monitor
1920x1080px
23"
96 PPI/DPI
Detected by Windows as: "LG 2343(Digital)"
I want to make both displays to work together with different "DPI Scaling" on Windows 8.1 Pro Preview so GUI elements render correctly scaled between them just at it happens on Apple OS X, I have read an excellent article which shows how to change and customize this settings but settings apply over all displays and there isn't a way to make windows know the DPI/PPI of the Retina monitor.
http://www.eightforums.com/tutorials/28310-dpi-scaling-size-change-displays-wind ows-8-1-a.html
How can I achive this?

Hello. I have the same setup - Windows 8.1 on Macbook Pro Retina and Thunderbolt display.
What I've noticed is that in the device manager both the Thunderbolt display and the Macbook screen show up as "Generic PnP Monitor," and I am wondering if these generic device drivers are not passing the correct resolution/screen size informations to the OS.
Maybe Apple can create customized drivers for each one of their monitors instead of using the generic driver?

Layers wont stay put

okay, so i spent about 4 hours making this quick layout for a
friend, and i set it up as 3 mouseover buttons that show layers
over the bg with content, so its pretty much like discoordinated
dropdown content boxes. but after i placed all these layers wher ei
wanted them and everything it looked sweet. then i resized my
window for some reason or other... and all the layers were
completely out of whack! i mean it was mega lame, now im
heartbroken because of being defeated by such a small flaw, and i
need some help. I did some searches, and i heard something about
making the CSS styles "positioning:relevant" instead of Absolute. i
tried this, but it messes up the buttons, and makes them
undraggable , so i cant reposition them where i want them. plz
help

The entire site in one page makes for a very heavy page - 4
pages worth. It
makes for a page that is non-functional if javascript is not
enabled, or if
someone is using an assistive reading device. It makes for a
page that
cannot be bookmarked. And did I say the page willl be heavy?
The code I gave you works because of the nature of absolute
positioned
elements. Their position on the screen is calculated based on
the position
of their nearest positioned ancestor container. When there is
no nearest
positoined ancestor (the case when you have a page that is
entirely
constructed with layers), then the calculation defaults to
the position of
the body tag, which would be the upper left-hand corner of
the browser's
viewport. My code gives the page a positioned ancestor, but
it's one that
is positioned relatively, not absolutely (that's ahat the
div#wrapper is),
and this means that the relatively positioned div can be
centered by giving
it a width, and auto margins left and right. Since the layer
is inside the
wrapper, and since it uses the wrapper for its position
reference, and since
the wrapper is centering, the layer is also going to be
centering.
Can you follow that?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Fyx`" <[email protected]> wrote in message
news:[email protected]...
> thanks alot murray that helped, but why is the "entire
site in one page"
> idea a
> bad one? the site is only going to have about 4
different pages to it in
> total
> so i figured id try to keep it inclusive. also... if im
not asking too
> much,
> could u explain why adding those tags works? sorry if im
being pestering
> im
> just eager to learn your ways ^^
>

After dragging a song into a playlist, the playlist menu window just stays put and in the way. what gives?

So I'm putting together a playlist in Itunes 11.1.5, selecting songs and dragging them over into the pop-in playlist menu, as you do.
The first thing I notice is that the menu won't appear after I've begun dragging the chosen song and I need to grab and drag it a second time to make the playlist pop-in materialize.
That second attempt is always successful in that the song does get added to the selected playlist, but then the playlist drop-in menu simply hangs out, rather than sliding out of view again. It blocks the righthand third of everything and nothing makes it go away. the only respite is to switch over to the "playlists" view which, presumably because it doesn't have that functionality of the drop-in menu, disappears same. When switching back to the Album view, the drop-in menu will be gone, but my place in my library will be lost.
Annoying.
Any ideas?

Possibly a multiple tag issue. Try right click and Convert ID3 Tag > None two or three times, then Convert ID3 Tag > v2.3. You'll need to reapply album art, but I susepct that will fix it. iTunes works best with a single ID3v2.3 tag but some software creates parallel v1 tags, and it is even possible to add multiple tags for multiple languages. iTunes behaviour with multiple tags is somewhat unpredictable, occassionaly causing it to revert changes it seems to have applied.
tt2

My Ipad wont retrieve my new emails and if I try to check passwords in Settings, the settings window only stays open open for a second or two and the automatically closes. Any help on how to fix. I tried the turn off and on trick and that didn'

My Ipad wont retrieve my new emails and if I try to check passwords in Settings, the settings window only stays open open for a second or two and the automatically closes. Any help on how to fix. I tried the turn off and on trick and that didn't work either. Thanks for any help.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Multi-monitor application switching bug in Windows 8.1

In the latest 8.1 update, we got some better features here and there, but using metro apps seem to break multi-monitor setups.
In certain circumstances, the cursor will get "caught" between screen edges, as if the metro app-switcher or charms bar were open.
There's no one way to reproduce this bug, sometimes it happens and sometimes it doesn't, but it usually starts to happen when switching from a metro app to the desktop on the main display via the top-left hotcorner.
This may also happen in many other circumstances involving metro apps or the hotcorners or anything like that. I have not had a problem involving the start screen so far. Getting rid of it (temporarily) is just as finicky as reproducing the issue. I really
have no idea what makes it go away, but switching back and forth between apps using different methods (hotcorners, taskbar, metro minimize/close buttons) seems to get rid of it until you interact with apps again.
I have an AMD r9 280x and 2 1080p displays. I am not using eyefinity. I am running Win 8.1 Pro updated to the latest 8.1 update where there are metro apps on the taskbar.
Needless to say, this is very annoying. If I can't smoothly move my mouse cursor between screens, it really interferes with a dual/multi screen setup. With all the people with multiple screens, I'd expect more people to have run across this problem, so if
you need more information to identify whether this is a software/OS issue, let me know.

In certain circumstances, the cursor will get "caught" between screen edges, as if the metro app-switcher or charms bar were open.
That's not a bug. It's a feature. Unfortunately there is no GUI support for it. And evidently there needs to be a training dialog, in the same way that there is one for Flicks. Search for "Escape Velocity"...
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_update/issue-with-dual-monitors-after-windows-81-update/30431433-32a7-48e7-853e-f6f391f5fa3e?msgId=2139704d-c2d2-44e6-b466-452769e7fdbf
That's strange. They called it Escape speed? Implying direction doesn't matter? <eg>
Robert Aldwinckle

Uix 2.2.8 multi monitor related bug

Hi,
I have a multi monitor system, on the seconnd screen, there is the browser , showing a page which has a Date Picker and a LOV. If I click on one of the icons, the window opens, and then all of a sudden jumps to the first screen with IE, with Mozilla it already opens on the first one. Same screen would be nice though.
Bye Jan

Hello Jan,
In the UIX javascript code the newly opened window's coordinates are checked to make sure it is not partially off the screen. If so, the window's coordinates are adjusted to put it on the screen.
I think there is a bug in IE which doesn't treat the multi-monitors as a single monitor, or something like that. Unfortunately, I doubt we can do anything about this.
Are you saying it works in Mozilla, correct?
Thanks,
Jeanne

Multi Monitor - different Screeen Saver for different monitor - Setting for notebook computers...

Hi,
I have a question about the multi monitor, screen saver setting for Windows 7. I'd like to know 2 questions.
1.) if I can set different screen saver settings on different monitors
2.) If I can do it, can I work on the external (or non-primay) monitor, when I have the primary monitor with "blank" screen saver?
Basically, I put my notebook computer at the docking station at work, and the docking station is connected to a 22" monitor, desktop keyboard and mouse. So, at work, the 22" monitor and K/B would be my primary use. However, I still "flip"
open the notebook monitor for dual monitor use.
I'd like to "save" the notebook monitor when I don't use it for 30 min. or so... I'd like to "power" it off or set it so that it would only turn on if I move my mouse to that screen.
Is there a way to do it?
Thanks

Hi
There isn't any way to do what you are describing.
The reason is that both monitors have the same source for the video. You can extend the video to the second monitor, but this just gives you more screen space.
The screen saver will only display on the monitor that is set as the default and when the screen saver starts, the other monitor will be blank.
Hope this helps.
Thank You for using Windows 7
Ronnie Vernon MVP

Why is the Record button not there in MULTI-CAMERA window

I don't have a RECORD BUTTON in MULTI-CAMERA window. Master Collection, Prem Pro CS6.
I've put 6 camera sources togther, used IN Points, selected all, opened Multicamera window, I can select which camera source in multicam window but I dont have a RECORD button.
Watching Multi cam enhanced http://tv.adobe.com/watch/digital-video-cs6/expanded-multicam-editing-in-premiere-pro-cs6/ ............I should have a record button, so as I change the source it RECORDS, but I have NO RECORD button in my version.
Prem Pro CS6
PC
3.3ghz i7
64 GB RAM
Plenty HD incl SSD

My guess is that you didn't actually open the Multi-Camera Monitor, but just loaded the multicam sequence into the Source Monitor.

The screen on my macbook pro wont stay at a steady lighting

at random moments the screen saver on my macbook pro wont stay at a steady lightening. From time to time the lighting will turn birght and then it wil dim, randomly.
my first instinct is that someting might be wrong with the hardware, however, i've told to reset my power center.
How do you reset the power center on a macbook pro?

Go to system perferences ,then click display and check if ur on auto ajust brightness this make screens changing due to lighting background,u might want to turn this off,ur decision.......or check ur energy saver beside display u might have very short settings,u can adjust both computer sleep or display sleep or in window u can see say slightly dim the display while on battery power,u might want to put this tick out....u hav selection of choices.....

Multi-Monitor PSE 9 Corrupt Display

Multi-Monitor PSE 9 Corrupt Display
Evening all -
First post here at PS Gurus. I hope that you guys can lend your expertise in pinning down an issue that I am having and have also had on other PS versions. I am running
Windows 7 (64 bit) Ultimate
2600k / 8 gb ram / 256 Samsung SSD / 460 GTX 1GB
Matrox Triplehead 2 Go with x3 22" monitors (resolution 5040 x1050)
A fresh install of the trial version of PSE 9 is yielding corrupt main toolbar and options bar (for each tool selected). The application is expanding full screen on all three monitors just fine but the toolbar are corrupt - partly transparent / party compressed to the left. No matter what I have done in terms of resizing the application window the results are the same or get worse.
On another computer I installed PS CS5 (also under win7 64 bit environment) and I was having the same issue. However, at the time I thought the install was bad in some shape or form so I dropped the issue.
I am now considering PSE 9 but see that Win7 + Matrox just isn't working correctly with this combination of hardware / software components.
Has anyone see this issue or know of a potential fix? I have read a couple of threads on the net with similar issues but I don't see any resolution. Your help is greatly appreciated.
Thanks-
Benjamin

My main reason for testing PSE-O 9.0 was to find out if this "bug" was fixed. I can not use PSE-O to organize and show pictures the way I want to with this weaknes in place. Your answer is probably correct, bun not at all helpfull.
So thank you for trying, but my test of PSE O is over for now.
Does anybody out there know of other products that will do the trick?

Multi-monitor window wont stay put :(

Similar Messages

Maybe you are looking for