Multi Node configuration on Apps 11i

Hello,
I need to add a second apps node and the Metalink Note 217368.1 is not very useful. I'd like a real case to try.
Thanks

Although i do not comment upon any metalink note,still i have listed out the detail setps to add an additiona node to an existing 11i system in my new paost here
http://appsdbablog.com/blog/2006/10/adding_an_additional_node_to_a.html
Hope it helps
Sam
http://www.appsdbablog.com

Similar Messages

R12 Single node to Multi-node Configuration

Hi All!
We have a single node setup (Applications and Database are on the same server). Now, our management decided to setup a Multi-node configuration and i'm the one who will do this.
The plan is to use Oracle ASM and RAC for the database and for the Application is to have a multiple application servers. For the database, we will be using a minimum of 3 servers and another 3 servers for the application. Is this possible? How can this be done. Can someone point or give some link or infos on how to do this. We're going to use the existing data on the single node server.
Thanks and Regards,
cmadiam82

Hi,
We have a single node setup (Applications and Database are on the same server). Now, our management decided to setup a Multi-node configuration and i'm the one who will do this.Contratulations. This is a good oppurtunity.
The plan is to use Oracle ASM and RAC for the database and for the Application is to have a multiple application servers. For the database, we will be using a minimum of 3 servers and another 3 servers for the application. Is this possible? How can this be done. Can someone point or give some link or infos on how to do this. We're going to use the existing data on the single node server.For a start you can read
http://gjilevski.wordpress.com/2009/12/13/rac-enabling-ebs-12-1-1/
http://www.appsdba.info/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=52&MMN_position=44:44
http://www.appsdba.info/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=61&MMN_position=57:57
Thanks

Admin node in Multi node Configuration

Hi,
Admin used to apply patches / run ad utilities and to run the upgrade tools.
If we only one MT then that will be the Admin node.
In my Case i am having the 2 middle tier nodes and 1 DMZ node and all all nodes having the
s_isAdmin variable ' YES ' in Context file.
In this case from where i need to run the .patches / run ad utilities and to run the upgrade tools ?
EBS version: 11.5.10
--Thanks
Vijay
Edited by: Vijay.Cherukuri on Aug 10, 2012 4:05 PM

Thanks for your reply Husein,
I have checked the mount points on all application nodes.
The APPL_TOP mount point is comming from (/test/applmgr) from same mount point (same filer )across all the nodes.
My other Question is
In case of non shared APPL_TOP , Admin should come from all nodes right ?
Means we need to apply patches or need to do upgrade on all nodes separately ?
Please correct me if I am wrong.
--Vijay..

MW 2.19 multi node upgrade patching fails on second, third, etc node.

When using Maintenance Wizard 2.19 with multi-node configuration patching will fail after the first node with an error in the adpatch log that states invalid options as seen below.
"AutoPatch warning:
Ignoring unrecognized option: "options".
Connecting to APPS......Connected successfully.
AutoPatch error:
You must be in Maintenance Mode to apply patches.
You can use the AD Administration Utility to set Maintenance Mode."
Please update this forum if you hit this issue and I can send you the fix until Maintenance Wizard 2.20 is released.
Thanks

As requested here's a paste of the command log, I can just see entries for the admin node and not the forms/web node.
Many Thanks
INFO - Help on monitoring when multiple drivers and nodes are applied.
If the web window times out, click on the x and rerun it to view the updated log
file. It will change as the patch continues to run in background. Just keep marking it
success until it is complete or check the active patch node manually:
$ tail -f $APPL_TOP/admin/${TWO_TASK}/log/patches_PRE_1703_1_patchit11i*.log
Each node, if multi-node, will be determined and the patch drivers will be applied
on the right nodes in the right order. Look for the ACTION: statement.
ACTION: execute on node: apps , patch=patches_PRE_1703_1 driver=u_merged.drv
patchit11i.sh REMOTE SIZE: 47535 LOCAL SIZE: 47535
OK - no update needed for patchit11i.sh, same size as on EOF: 47535 bytes.
Found release REL=11.5.10.2 from fnd_product_groups.
Starting adpatch for: patch=patches_PRE_1703_1 force= driver=u_merged.drv
Using defaults file /u10/orafun/appl/admin/FUN/adalldefaults.txt.
Starting patch with the following command:
/u10/orafun/appl/ad/11.5.0/bin/adpatch defaultsfile=/u10/orafun/appl/admin/FUN/adalldefaults.txt logfile=patches_PRE_1703_1_patchit11i.log patchtop=/u10/orafun/appl/patch/patches_PRE_1703_1 driver=u_merged.drv workers=6 interactive=no options=hotpatch,novalidate,nocompilejsp,nocompiledb,nomaintainmrc,nogenerateportion restart=n
Confirms adpatch is not still active, and views Check patch log times.
... PROCESS LISTING of adpatch
... ls -l of patches_PRE_1703_1_patchit11i.log to see date/time stamp
-rw-r--r-- 1 orafun dba 53761 Aug 30 14:41 /u10/orafun/appl/admin/FUN/log/patches_PRE_1703_1_patchit11i.log
... last 20 lines of log file: /u10/orafun/appl/admin/FUN/log/patches_PRE_1703_1_patchit11i.log
for details.
Purging timing information for prior sessions.
sqlplus -s APPS/***** @/u10/orafun/appl/ad/11.5.0/admin/sql/adtpurge.sql 10 1000
Done purging timing information for prior sessions.
AutoPatch is complete.
AutoPatch may have written informational messages to the file
/u10/orafun/appl/admin/FUN/log/patches_PRE_1703_1_patchit11i.lgi
Errors and warnings are listed in the log file
/u10/orafun/appl/admin/FUN/log/patches_PRE_1703_1_patchit11i.log
and in other log files in the same directory.
SUMMARY - patchit11i.sh - Completed application of patch: patches_PRE_1703_1, driver: driver=u_merged.drv
OK - adpatch completed successful.
INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
Redo the Action
Completed Successfully Post Hour Minute

Multi Node Redundant QR Server Configuration

I have a multi server and multi node FAST ESP configuration setup. (2 columns)
The goal being that should 1 server become unavailable, the other QR server can be configured (in the search application) to service the search requests.
However, the problem i have is when i take the non admin server offline (shutdown) and use the QR server on the admin node, i get an error stating that "One or more nodes unavailable for search"
Does anyone know where in the configuration this would be set?
I've looked at what i believe to the be the obvious configurations (nodeConf,topfdispatcher,search-1) and they all point to their respective machine names.
Any advice?
Kevin Sperring

Kevin,
This is expected if one of the search node is down.
If you want qrservers to provide results despite partial availability of nodes, you will need to enable allowpartialresults on the FAST Admin node:
($FASTSEARCH/etc/config_data/QRServer/[cluster]/etc/qrserver/qrserverrc) .If you don't have the parameter, please add it on this file (allowpartialresults =1 ) and restart the qrservers.
If you want qrservers to shut down http sessions upon problems connecting to its local fdispatch (which partial is NOT a case of), you could add the httpdisable flag.
Edit the file $FASTSEARCH/etc/config_data/QRServer/[cluster]/etc/qrserver/qrserverrc and change the value httpdisable=0 into httpdisable=1.

Oracle Application 11i using multi node installation

Hi every one,
Can anyone help me to install in multi node.
/d01 is in dbtier(1st unit) and /u01 is in appstier(2nd unit).
how to install that kind of split configuration.?
do i need to stage in appstier? and run rapidwiz?
how to copy configuration file from dbtier to appstier?
do i need to enable load balancing?
i expecting your soonest reply guys..
Thanks BJCDR

Check "Oracle Applications Installation Guide: Using Rapid Install" Manual, all the steps to perform a multi-node installation and configure load balancing are mentioned there.

Oracle apps clone multi-node to multi-node

hey
where can i get step by step rapid clone on linux doc.
[multi-node to multi-node]

take a look at notes: 230672.1 & 216664.1
-Kevin

Has anyone installed XMLP in a multi-node appsTiers environment?

We are experiencing a problem with installing XMLP 4.5.
Our EBS 11i(11.5.9) configuration: dbTier is on HP-UX, admin/CM of appsTier is on HP-UX and web/forms of appsTier is on Windows, i.e two nodes appsTier.
Applying the major patch 3554613 (XMLP 4.5) created $APPL_TOP/xdo/11.5.0 on both UNIX and Windows nodes. But the $JAVA_TOP/oracle/apps/xdo is only created on UNIX node.
When we reported the problem of XMLP in relation to OA Framework (see my other posting on this forum) to Oracle, the support engineer said the patch should create %JAVA_TOP%\oracle\apps\xdo on Windows too. But he is not sure as he only has a single node environment.
We tried a couple of times of reapplying the patch without any luck.
We start wondering if the XMLP 4.5 can be successfully installed in a multi-node appsTiers environment.
So my question is:
Has anyone successfully installed XMLP in a multi-node appsTiers environment?
Thanks.

Hi
XMLP is installed on the apps middle tier so it should be no problem. The only thing, once you have it installed is if you want to use our cfg file you'll need to have the cfg file installed on all nodes.
Whats the TAR number ?
Tim

Apps 11i Load Balancing

Hi,
I have load balancing between 2 Apps Tier, and all the Users are connected to Node2 only, none of the users are on Node1.
Apps 11i and DB 10.2
Any suggestion please....
Thanks,

I have load balancing between 2 Apps Tier, and all the Users are connected to Node2 only, none of the users are on Node1.
Apps 11i and DB 10.2
Any suggestion please....Was this working before? If yes, any changes been done recently?
Please run AutoConfig and bounce the services and see if you can reproduce the issue.
Also, please review (Advanced Configurations and Topologies for Enterprise Deployments of E-Business Suite 11i [ID 217368.1]) and make sure your setup is correct.
If you can access each of the nodes directly (not through the load balancer), then you need to check the configuration of your load balancer -- Implementing Load Balancing On Oracle E-Business Suite - Documentation For Specific Load Balancer Hardware [ID 727171.1]
Thanks,
Hussein

Apps 11i disaster recovery with hot standby db

Hello,
We are trying to formulate a disaster recovery plan for Apps 11i (single node install) utilizing a hot standby database for the db layer and file synchronization
(rsync, rcp, whatever) of the application stack. We're comfortable with the hot standby db technology, but uncertain that simply keeping the application stack
sync'd on the standby host is sufficient to have a complete failover solution. Is anyone successfully using this type of configuration and , if so, is there a
cookbook methodology for promoting the standby system to a primary? Can you simply rename the host on the standby and turn the key on?
Thanks for any/all suggestions.
Terry Riddle

Hi,
we are planning a similar recovery strategy. Where can I find documentation about your strategy? A consultant has suggested has to install Legato with two products for DBs synchronization.
Thanks Gigi
My email: [email protected]

How to run all Concurrent Requests in a single node in a multi node env

DB;11.1.0.7
Oracle Apps:12.1.1
OS:Linux 86x64 Red Hat
PCP setting is enabled.
Load Balancer is enabled.
APPLDCP=ON
Could anyone please share - How to run all Concurrent Requests in a single node in a multi node env where there are 3 web tier nodes?
Thanks for your time!
Regards,

PCP setting is enabled.
Load Balancer is enabled.
APPLDCP=ON
Could anyone please share - How to run all Concurrent Requests in a single node in a multi node env where there are 3 web tier nodes?Concurrent requests will be processed by the CM nodes and it has nothing to do with the 3 web tier nodes you have.
If you mean the database instance, then please see these docs.
How to run a concurrent program against a specific RAC instance with PCP/RAC setup? [ID 1129203.1]
In A PCP/RAC Configuration, How To Find Out On Which RAC Instance FNDSM Is Currently Running? [ID 1089396.1]
Thanks,
Hussein

Oracle 10g multi node installation

Hi,
Multi node installation for Oracle 10g Appl Server
- Node A: Install core business Database server.
- Node B: Install Application Server Infrastructure (OID, repository database).
- Node C: Install Application server middle tier (forms, reports, portal, discoverer, java) at node C. must specify the OID server (node B). And configurre tnsnames to access database server (node A).
steps for this. Any doc or link
Thanking you
regards,

As simple as you mentioned.
1.- Install db in node A
2.- Install Infra in node B, you will get a servername and port for OID (look on $OH/install/portlist.ini to get it), and the password, usually the same as for the System and Sys users for the repository.
3.- Install Apps in node C, even if you install infra and apps in same node, the installer will always promp for the OID server name and port wich I mentioned earlier.
4.- Configure node C tnsnames to access node A
Hope this helps
Greetings.

Apps 11i clone RAC to Non RAC

Hi hussein,
I have 4 node 11i applications with PCP and Load balancer. Now we have a requirement to clone it to single node.
OS     = Linux 4.6
Apps   = 11.5.10.2
*Node details:*
database:
Database RAC1 = 10.2.0.4
Database RAC2 = 10.2.0.4
Shared db        = ocfs2
Application:
Apps01 = Form, web, admin, conc
Apps02 = Form, web, admin, concI referred tech notes:
Certified RAC Scenarios for E-Business Suite Cloning [ID 783188.1]
From this tech note it seems this scenario is not certified with rapidclone.
*Cloning Oracle Applications Release 11i with Rapid Clone [ID 230672.1]*
*Manually Cloning Oracle Applications Release 11i with 10g or 11g RAC [ID 760637.1]*
For database I will use rman backup and use duplicate command to clone it. Now i have doubt for application tier.
I performed so many multi-node to single-node clones with split configurartion (form, web, admin - node1) and (conc , db -node2), in this situation i used adpreclone.pl merge appsTier on node1 and adpreclone.pl merge appl_top on node two.
Now I am confused how to do it. As all services exists on both nodes.
Do i need to run merge appsTier on both nodes? or merge appsTier on one node and merge app_top on other? or no need to run merge appsTier? confused :(
Any pointers on this appreciated.
Thanks for your support as always :)
regards,
X A H E E R
Edited by: ora_tech on Feb 14, 2011 10:53 AM

Hi Hussein,
Many thanks for tech note.
I performed so many multi-node to single-node clones with split configurartion (form, web, admin - node1) and (conc , db -node2), in this situation i used adpreclone.pl merge appsTier on node1 and adpreclone.pl merge appl_top on node two.So same on node 1 i need to run preclone with merge appsTier and node two just merge appl_top right. As per the tech note.
thanks,
X A H E E R

Migrate Single Node 11.5.10.2 --- to --- Clustered Multi Node

Dear All
I have a project to migrate a single node 11i EBS to Clustered Multi-node
& I opened Thread under (Forum Home » E-Business Suite » Technology - LCM: 11i Install/Upgrade)
the URL is
Migrate Single Node 11.5.10.2 --->> to --->>> Clustered Multi Node
Please if you can help me updating that thread with your answers.
Best regards
Naji ghanim
Apps DBA
TAGITI

Dear All
I have a project to migrate a single node 11i EBS to Clustered Multi-node
& I opened Thread under (Forum Home » E-Business Suite » Technology - LCM: 11i Install/Upgrade)
the URL is
Migrate Single Node 11.5.10.2 --->> to --->>> Clustered Multi Node
Please if you can help me updating that thread with your answers.
Best regards
Naji ghanim
Apps DBA
TAGITI

HRMS apps 11i help

Hi all
I am new to apps 11i,my boss just came with a requirement of creating employment certificates in erp,
Can someone guide me to create an offer letter for each employee with the company header
Kindly let me know if any details are needed as i am new to apps
thanking in advance
regards
oracleuser

hi
i did ctrl+L ,a small pop up box comes asking to type the interent address of the document we wish to search for
these are things i view when i got to hrms responsibility
abc HRMS Manager
Flex Values
Payment Invoice(PY)
People
Enter and Maintain
Salary Management
Events and Bookings
Delete Personal Records
Manage Contracts
People : Maintain Using Templates
Hiring Applicants
Entering Employees
Maintaining Employees
Entering Contingent Workers
Maintaining Contingent Workers
People : Total Comp Participation
Person Benefits Balances
Person Benefits Assignments
People : Total Comp Enrollment : Benefits Enrollment
View Enrollment Results
Non-flex Program
Savings Plan
Miscellaneous Plan
Enrollment Override
Dependent/Beneficiary Designation
Person Primary Care Provider
Person Life Events
People : Total Comp Contribution
Record Continuing Benefits Payment
Monthly Participant Premium
Monthly Premiums
Manual Payments
People : Mass Updates for Person
Mass Update of Applicant Assignments
Mass Update of Employee Assignments
Mass Update of Assignments
Fast Path
Address
Picture
Special Information
Contact Information
Event for Person
Phone Numbers
Absence Information
Application
End Application
Assignment
Assignment Costing
Assign. Budget Values
Grade Step Placement
Secondary Status
Pay Method
End Employment
Employee Review
Salary Review
Salary History
Element Entry
Accruals
Tax Statement
Statement of Earnings
P45 Form
Adjust Balances
QuickPay
Reverse Payroll Run
Extern./Manual Payments
Person Type Usage
School/College Attendance
Assignment Rates
Element Entry
End Placement
Work Structures
Location
Status
Recruitment Letter Type
Contract Letter Type
Elections
Assignment Rate Types
Collective Agreements
Collective Agreements and Grade Structures
Work Structures : Collective Agreement
Define Entitlement Item
Define Collective Agreement
Define Collective Agreement Grades
Define Eligibility Profiles
Define Derived Factors
Work Structures : Organization
Description
Organization Manager
Hierarchy
Diagrammer
Work Structures : Job
Description
Path Name
Career Path
Job Groups
Work Structures : Position
Description
Hierarchy
Mass Move
Diagrammer
Position Transaction
Position Copy
Mass Position Update
Work Structures : Grade
Description
Grade Rate
Pay Scale
Point Values
Grade Steps and Points
Progression Approval
Work Structures : Budget
Budget Worksheet
Budget Details
Budget Reallocation
Budget Calendar
Budget Set
Budget Characteristics
Budget Migration
Payroll
Description
Consolidation
Payment Methods
GL Flexfield Map
Update Payroll Run
Assignment Set
Element Set
RetroPay Set
GL Daily Rates
Conversion Rate Types
Monetary Units
Balance Sets
View
Vacancies
Grade Comparatio
Employee Accruals
Payroll Process Results
Assignment Process Results
System Messages
View : Histories
Worker Assignment
Absence
Run Results
Salary
Entries
View : Lists
People Folder
Assignment Folder
People by Assignment
Assignments
Workforce by Organization
Workforce by Position
Workforce by Position Hierarchy
Employees by Element
Employees by Absence Type
People by Special Information
Processes and Reports
Submit Processes and Reports
View Requests
View Reports
Workflow Notifications
Define a QuickPaint Report
Run a QuickPaint Report
Submit Custom Reports
Process Log
Batch Process Parameters
Monitor Batch Processes
Mass Information eXchange: MIX
Batch Element Entry
BEE Summary
Mass Information eXchange: MIX : System Extract
Layout Definition
Criteria Definition
Extract Definition
Extract Results
Change Event Log
Other Definitions
Person Types
Application Utilities Lookups
Special Information Types
Table Structure
Table Values
Time Periods
User Profile Options
Formula Functions
User Types and Statuses
Dynamic Trigger Definition
Dynamic Trigger Functional Area Grouping
Table Event Updates
Other Definitions : Payroll Exception Reporting : Payroll Exception Reports and Groups
Reports
Groups
Security
Profile
Assign Security Profiles
CustomForm
Information Types Security
Report Sets
Task Flow Nodes
Task Flow Definitions
Forms Configurator
Contexts
Transaction Status
Task Flow Unit kindly help me
thanking in advance
regards
oracleuser

Multi Node configuration on Apps 11i

Similar Messages

Maybe you are looking for