Multi-page layout

Friends please help me with this.
The information I need for a single record runs to 2 pages, which means I have a multi-page layout. I have pulled the repeating frame to the second page and created some fields with-in the frame in the second page. When I run the report it gives me 'Object body is not fully enclosed by its enclosing object' error. Can someone help me set the property palette for the frame to print multiple pages.
Thanks
Joe.

Hi Joe,
It is quite difficult to help you set the properties without looking at the report layout, because this is a very generic error and can be caused by several types of mistakes in the report design. What I would suggest is - do not pull the repeating frame to the second page. If you want a page break after the previous frame / repeating frame, set the property "Page Break After" to yes.
Navneet.

Similar Messages

  • Retain multi-page layout when exporting to PDF

    I have created a multi-page layout, I want to export this to PDF but retain the multi-page view so the client can easily understand how it will look. Currently it exports to single pages rather than the nice 3 page spread I have created.

    Actually it seems it doesn't need to be created as facing pages, as long as you have the doc set not to shuffle and you've dragged the pages together into a single unit. Check the "Spreads" box in the export dialog.

  • In Pages '09, how do I remove the header from the first page of the document in a page layout document?

    Working Pages '09, I am trying to set up a multi-page document using page layout  (not a word processing document, because I'll be using lots of graphics and text boxes), with headers and footers, but no header on the first page, as this will be the title page. The layout>section pane has the 'First page is different' option  greyed out (because it's a word processor only option). Help tells me that each page is it's own section in page layout, but there is no way to have one page without a header and all the others with, as far as I can tell. Am I completely missing something or is there a way around this?
    Also, I want to do this again for additional chapters in the document (or else, I believe, be forced to manually start page numbering for each chapter in a new document).
    Cheers.

    Hi, Barry. I don't know why this solution didn't work for me :-\ Does it matter that my page numbers are in the footer and not the header? When I follow your direction, the pages do get numbered differently. My problem occurs with the last step.
    1. Open the Inspector. (Check!)
    2. Click the Layout button (second from left). (Check!)
    3. Click Section. (Check!)
    4. Make the two settings shown: (Check!)
    5. Go to Page 1 and delete the contents of the Header. (When I do this, the content for all footers is deleted...)
    I really appreciate your insight.

  • How to Design Multi Page Report in SSRS 2008

    Hi All,
    I have managed to create a multi page report. When I am preview mode i can see that the report has 2 pages.
    But when I am in design view I cannot view the second page. How can I view the second page. Reason being I am trying to create a template where the table for certain data needs to be at the top of the page and some data at the middle and so on.
    Thanks in advance.
    Aash.
    Aash

    Hi Aash2,
    According to your description, the behavior of cannot view the second page in design view is expected, in another way, there is only one page in design view.
    Report Designer supports two views: Design to define the report data and report layout, and
    Preview to display a rendered view of the report. If you would like to show a table on the first page, and show the other table on the second page, you can add a page break on the first table like followings:
    1. Click the gray handle in the first table, select “Tablix Properties”
    2. Click “Add a page break after” check box under Page break options in General Tab
    After do above, you can see the first table in the first page, and the other table in the second page.
    For more details about report designer, please see the following article,
    Working with Report Designer in Business Intelligence Development Studio:
    http://msdn.microsoft.com/en-us/library/cc281300(v=sql.110).aspx
    If you have any question, please feel free to ask.
    Thanks,
    Eileen

  • I'm in a multi-page document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

    I'm in a multi-page Pages document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

    Not on my document. I have a 7 page document open. The "flashing vertical bar" is at the top of page 3. I have the thumbnail view showing. I click page break and two blank pages are added to the end of my document. I have to scrool thru the pages to see that the 2 pages were added as they do not appear in the layout view... I'm not sure if it is inserting a "section" as it adds two blank pages.. But I am clicking on "INSERT PAGE BREAK".. So guess there are still a lot of bugs to fix..
    Thanks again

  • How to copy and paste a multi-page table of contents?

    Hi everyone.
    I have a large document with a Table Of Contents extending over two pages. I'd like to copy the entire TOC then paste it into a new Pages document.
    I have been able to copy the TOC however when I try to paste it into a new blank Word Processing pages document the following Error message appears: "The table of contents is empty because none of the paragraph styles selected in the Document Inspector are used in the document."
    I can paste it into a blank Page Layout pages document however it pastes it into a text box with only one page of the TOC in it.  Even if the new Page Layout document has two pages and I extend the text box over the two pages only one page of the TOC is copied into the new Page Layout document. At the moment the only work-around I can do is to take a screen shot of each individual page of the TOC and paste them individually into a new pages document. I have tried exporting the entire original document to a plain text file however all the formating is lost (obviously).  I have also tried exporting the entire original document to a Word document (.doc) however it won't let me copy the multi-page TOC and paste it into a new Word document. 
    Is there any way to successfully copy a multi-page table of contents to a new Pages document?

    VQM wrote:
    Thanks Peter.
    PeterBreis0807 wrote:
    The TOC is a hyperlinked text derived from the contents of the file it was generated in.
    You can try exporting the pages the TOC is on as rtf, text or pdf and transferring that, but I would question the value of a TOC for one document being in an entirely different document, which doesn't have what the TOC is pointing to.
    Have you tried copying the T.O.C. Section from the document Thumbnails and pasting into the document Thumbnails of the 2nd document?
    Peter
    How does one export individual pages from a Pages document?
    I've also tried to copy the TOC section from the document thumbnail however I can't figure out how to select multiple pages in the document thumbnails.  It only allows me to select one at a time. Furthermore, when I do select a single page from the thumbnail section and attempt to drag and drop it into the the thumbnail section of the second document it picks up the whole document and wont allow me to move it from the thumbnail section of the original document.
    Shift click to select multiple pages, and I did say Copy and Paste, not drag and drop.
    Peter

  • Inserting multi-page PDF file in Appleworks text document.

    When inserting a multi-page PDF document in an Appleworks text file, it only inserts the first page.
    How do I insert all the pages at once?
    Ron

    As far as I know you must break you PDF in single pages documents.
    Then you will be able to drag and drop all of them in a single process but it will be time consuming to move them so that they are correctly located in the layout;
    Inserting them one by one will be more efficient.
    Yvan KOENIG (from FRANCE mardi 21 juillet 2009 18:33:29)

  • Iphoto book page layout changes with the addition of a photo problem.

    I'm making a photo book of a recent road trip. There are times when I select a page,,, perhaps a page with 6 photos. The layout appears as the grey squares with a large vertical one on the left, 4 small ones in the upper right and a larger square in the bottom left (in the 'picture book theme).,,,,,, a really nice 6 photo page. I get 4 photos in on the page and when I add the 5th photo the page flips and puts the large photo on the right side while at the same time changes the photo with one of the smaller ones.
    Is this a software bug? It doesn't do it on all the pages only at times.
    It's driving me a bit nutz. Is there something i'm missing?
    Macbook   Mac OS X (10.4.9)  
    Macbook   Mac OS X (10.4.9)  

    As a first step I save the “wrong page” as a PDF from the print dialogue. That gives me a template for positioning guide lines in Photoshop that match the sizes and margins in the book layout.
    Then I open that PDF in PS. You will be prompted for a resolution and colour mode, use 300 pixels per inch and RGB mode. (If you've ended up with a multi-page PDF in the first step, PS allows you to select a specific page to open.)
    When PS has rasterised the page, press Apple + R and position your guide lines by pulling them out from the page rulers – you might want to increase the magnification to 200%. Align the guide lines with the edges of your images.
    Now you can delete the dummy layout image and fill the canvas with white. (At this point you might want to save the image as a template for future use.)
    One by one you can now precisely place your images and crop them along the guide lines – Snap to Guides needs to be enabled for that. Once you’re satisfied, flatten the image and make sure it’s in the sRGB colour space. If not, go to Image > Adjust > Convert to Profile... to change it.
    I save mine as JPEGs at maximum quality, but for instance Tiff would work fine, too.

  • Creating an multi-page, variable diptych package?

    My goal is to be able to have a set of diptych/triptych templates that allow me to create and preview multiple layout configurations in a single custom package.
    I started by creating 4 user templates, 600x447px diptych, 600x447 triptych, 447x600 diptych, and 447x600 triptych.I quickly realized these templates aren't good for much more than a single page preview. I can swap photos by dragging from the preview thumbnails, but I can't seem to copy the template onto multiple pages to test different photo combinations and placements and compare all in the same package. Additionally, there doesn't seem to be a way to easily bounce between templates- by clicking on a different template all my work is reset.
    I thought I could avoid this issue, by creating another custom package at a specific size and create different layouts on each page. The only problem with that is, there also doesn't seem to be a way to duplicate a page, I would have to set up the individual cells for each new page, which is a bit awkward if I want to play around with many different photo combinations.
    Is there a better way to do this, or am I stuck just creating one template at a time, exporting and then comparing all my variations as jpegs?

    You don't say what OS you are using and which scripting language you are thinking of doing this in…
    This is a sample that may get you started done in JavaScript so it's platform independent with the exception of my 'mac style' file paths.
    If your on a PC it may just be a typo to set to C drive or whatever you call them things…
    If you are on the mac OS then it should just dump a load of PDF's on your desktop.
    You say about a multi-page PDF but don't think Illustrator can do this unless its been added with multi-artboards in CS4?
    Others would have to let you know that…
    #target illustrator
    var docRef = app.activeDocument;
    with (docRef) {
    var docName = baseName(name)
    var pdfOptions = new PDFSaveOptions();
    pdfOptions.pDFPreset = '[High Quality Print]';
    // Turn all layers off
    for (var i = 0; i < layers.length; i++) {
    layers[i].visible = false;
    // Turn each layer on
    for (var i = 0; i < layers.length; i++) {
    if (i == 0) {
    layers[i].visible = true;
    redraw();
    var layerName = layers[i].name;
    var saveAsPath = new File('~/Desktop/' + docName + '_' + layerName + '.pdf')
    saveAs(saveAsPath, pdfOptions);
    } else {
    layers[i-1].visible = false;
    layers[i].visible = true;
    redraw();
    var layerName = layers[i].name;
    var saveAsPath = new File('~/Desktop/' + docName + '_' + layerName + '.pdf')
    saveAs(saveAsPath, pdfOptions);
    //close(SaveOptions.DONOTSAVECHANGES);
    function baseName(fileName) {
    var nameString = '';
    var extOffset = fileName.lastIndexOf('.');
    if (extOffset == -1) {
    nameString = fileName;
    } else {
    nameString = fileName.substr(0, extOffset);
    return nameString;

  • Sound overlay in multi-page pdf possible?

    Hi together,
    i didn’t find an answer for my following question in the forum yet, so here my question:
    How can i put sound overlay in my multi-page presentation? I would like to get the music started when opening the pdf, playing still on when turning the pages in my document. At the moment i can place a audiofile at a page, but turning the page stops audio (logic...)
    My workflow: Layout in Indesign CS4/5 (photos, videos, text) > export pdf > Acrobat > Multimedia, audio (to place a sound).
    Thanks for any help, Thomas

    From my experimentation, "Disable when: 'Disable Content' is selected from the context menu" does not work when you turn the page. The music stops immediately when you turn the page if the sound is not visible.
    However, choosing the property "Playback style: Play in Floating window" does work. Then make the floating window small. Like 5 pixels by 5 pixels.

  • Master Objects in Page layout

    It seems from a number of archived posts that Master Objects dont work when in page layout mode. The help menu says its possible but doesnt say how.
    I think this should be considered a bug as Page layout needs master as much as word processing.
    Any thoughts?

    I was hoping to use Pages for a relatively simple newsletter. Today, I started trying to learn Pages. What a disappointment! I wish to prepare a simple multi-page newsletter. master pages, and the ability to place small master objects such as logo's are important. The job really needs to be done in layout mode. And the Pages' limitation that there be one and only one page in each section of a layout document is a show-stopper. This seriously cripples the utility of master objects, and thus the whole Pages program.
    To make matters worse, the Apple documentation is, I believe, very misleading. It clearly implies one can do things such as have different master object positioning in facing pages of a layout document. But, it appears one simply cannot do this with any degree of ease. (I've copied relevant text from the Pages Help documentation below, so you can judge for yourselves....)
    Apple: you need to update this program, and until you do, you need to be sure the documentation accurately reflects what the program can and cannot do.
    Someone please let me know if I'm wrong!
    From the pages help menu: "You may want to add watermarks, logos, or other background images that appear in the same spot on every page of your word processing and page layout documents. These repeated graphics are called master objects.
    If your document is divided into sections, you can put different master objects in each section. Within a section, you can put a different master object on the first page of the section and on right and left pages in the section. See Setting Up a Unique Format for a Section’s First Page and Formatting Facing Pages in a Section for more information."

  • Opening Multi-page PDFs in Illustrator CS2

    A client sent me a 32 page pdf that was originally created from a giant Illustrator file. (He doesn't have the original Illustrator file). I want to rebuild it using InDesign, and I need to save elements from each page to use in my new layout.
    So am I correct that in order to do this, I have to open the pdf in Illustrator, choose page 1 from the dialog, save it out as an Illustrator file. Then open the pdf again, choose page 2, save it out. And so on, up to page 32? In other words, I need to open the pdf 32 times to get at each page? I can't seem to find anything in my books addressing this. And there is no option for opening it as a multi-page Illustrator document (with page tiling).
    Thanks for any ideas!

    Do you have a copy of Acrobat 7 or 8 (Pro, not Reader)? If so, open the PDF in Acrobat and from the Document menu select Extract pages making sure you have checked the box that says Extract Pages as Separate Files.

  • Jdev:Row level control in multi-row layout

    Hi,
    I have a multi-row layout wherein I am displaying 10 rows. I have an "Add Rows" button. When I click on "Add Rows", I want a new row to come up which is in editable mode.
    But when I am doing it, all the 10 rows also become editable.
    Is there any way to enable only the new row in Jdeveloper?
    Any inputs will be of great help.
    Thanks,
    Ashu.

    Hi Frank,
    The screen is a search page,( and Construction Mode property of region is autoCustomizationCriteria) The columns in the table are either Message text input or lov input and we have made them non editable using OAMessageTextInputBean (or OAMessageLovInputBean). All column are set read only as false initailly. We have tried making the columns editable and try to give the read only property dynamically (using a transient column) but that option is also not working. Please advise.
    Regards,
    Ashu.

  • Need Multi-Page TIFF Viewer Add-In for Safari

    Greetings - Any recommendations on a (preferably free of charge) multi-page TIFF viewer add-on for Safari?
    Thanks.

    Sorry for the delayed reply as I cannot access from work.
    Here is the link to the tool...
    [http://www.daeja.com/products/viewone1.asp]
    Here is what I did so far:
    I copied ViewONE files to my \forms\java directory
    Added the ViewONE ji.jar reference to my 'archive_jini' parameter in formsweb.cfg
    Create a Bean item on my form
    Added 'ji.applet.jiApplet.class' to my Implementation class property for item
    when I invoke the layout, I get the following error:
    FRM-13008 Cannot find JavaBean with name 'ji.applet.jiApplet.class'.
    Appreciate any info to get this going.

  • Slow Illustrator Multi-Page PDF Export + Alternative Solutions

    Hello everyone,
    I have a recurring job that requires 50-60+ small illustrations be placed into a few different layouts. The workflow I have set up right now is as follows: All of the illustrations are drawn in one Illustrator file with multiple page tiles. This file is exported as a multi-page PDF and placed in InDesign layouts. One main problem with this system is that it takes a long time to export 60+ page tiles from Illustrator.
    I'm totally open to any alternative workflow solutions or recommendations someone might suggest, but there are a few reasons why I've chosen the multi-page PDF approach. The Illustrations share global swatches and symbols and graphic styles and sometimes these items need to be tweaked. Editing everything in one file is faster than opening, changing, and saving 50-60 individual Illustrator files. My client often needs me to make alterations to the illustrations, and sometimes these Illustrations appear on more than one page and in different layouts. Using the one multi-page PDF helps everything stay nice and consistent across every layout and every page.
    If anyone has any suggestions for how to speed up the Illustration export or alternative workflow recommendations, I'd love to discuss them.
    Thanks!

    As Scott said, the multiple artboards in CS4 are the most efficient way to do that and upgrading sure will help to streamline your workflow. Your problem is that each element needs to be stripped, possibly flattened and other data removed when creating the PDF and that can take its toll. The only other way to do it IMO would be some script that takes each layer of your doc and converts it to an individual AI file or PDF. It may just not have any advantage at all - scripts can be slow if a lot is goingon and it still would take time to save and convert the files.
    Mylenium

Maybe you are looking for