Multi pages

Hi
what is the best way to handle multi panes inside border pane ?
I am using border pane , at the top I have some push buttons
I need to change the panes in the left , center or right areas based on the push button pressed at the top
the panes at left / right / center have more than one inner pane that can be in front (like swing cardLayout )
maybe to add or remove nodes / panes from the scene root or from the inner layout (at the left / right/ center panes)?
any substitute to card layout?
thanks

I did something which sounds similar in this thread (see the SampleGameLayoutRevised code).
Re: How can I implement a status bar at the bottom of a resizable application?
You could take a look at that and see if it answers your questions.
The approach it takes is the one you suggest => "add or remove nodes / panes . . . from the inner layout (at the left / right/ center panes)?

Similar Messages

How can i print only pages which have been highlighted, from a multi page file?

How can i print only pages which have been highlighted, in a multi page file.

Ah, I see want you mean. This might not be practical for you, but if you select one instance of the highlighted text and add a [space] to the little sticky note, all of the highlighted text on that page will appear in the summary.

How do I print selected pages from a multi page document

How do I print selected pages from a multi page document?
This question was solved.
View Solution.

Hi,
It depends on the software you are using, what is it ? In general you can select a range or just a number of pages.
Regards
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Saving as multi-page more than once

I recently figured out how to create multiple pages through Illustrator by saving as a pdf with page tiling. It works the very first time you save the file. Then, I try to save the file again after making corrections and the box that is normally in the print dialogue to make a multi-page pdf is not selectable anymore. I have been creating a new document and copying and pasting my imagery into a new document to save it for the "first time." Otherwise it doesn't show the option. Any suggestions?

Two options:
Change the portlet logic so it accepts multiple feeds and presents them all in one portletRegister multiple instances of the portlet against the single web service - they should all have separate prefsDepends on how you want to present the content. One gets you a single portlet with content in one place - the other gets you the ability to have multiple portlets distributed on the page. Personally, I find the latter maddening, but it depends on the audience and your threshhold for pain.
Thanks,
Eric

HP LaserJet M1522nf Multi Page Scanning Issues

OS: Win 7 Home 64bit
When I try to scan documents in PDF format on the multi page scanner, the pages does not feed into the scanner. The wheels on the scanner just turn. It is almost as though the printer does not recognize there are pages in the multipage scanner. I do not experience any problems whatsoever with the flatbed scanner.
Being stationed on Afghanistan it is not simple a case of taking it to the closest technitian.
I have restarted the computer, the printer, Adobe PDF but nothing solves the problem.
Then I also get a message: "HP FX Toolbox has stopped working." when I start or restart the computer. How do I fix this problem?
Appreciate the help.

Hi Sam (SamK24),
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this by clicking the following link: Printers - LaserJet.
Hope this helps, have a good one!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

I am having trouble printing multi-page documents on my Epson printer. 13" Macbook Pro, Adobe InDesign, Epson WF-7520

I have a multi-page document and I want to print some of the pages, double-sided, to check my work. I can't seem to get the interface to recognise that I want to print a specific range of pages, so it will print just one page [no double-sided] or, I assume, it will print the WHOLE LOT [not good at this stage!] HEEEELLLLPPP!!
To explain, the dialogue box which opens when you hit Command+P has an option of 'Pages' or 'Range' but 'Range' gives you only two options: All Pages or A4V. If I click the 'Printer' button I get another dialogue box with more options and from there I can choose to print 'All' or 'Pages' . . . and you change 1 to 1 to say, 1 to 3 for example. There is also an option to print double-sided. But nothing seems to be working and as soon as you finish with this second dialogue box it seems to forget every parameter you choose there. The summary page on the first dialogue box also seems suspiciously sketchy on details of what, exactly, it is about to print. By the way I have installed the latest driver set from Apple for this printer. Is anyone else having the same problem?

Thank you so much Eric. I did what you said. I still had the same result, but finally [somehow] I ended up clicking on something which doesn't even look clickable - this is a tiny set of back- and forward arrows in the 'Range' option. Using this feature seems pretty hit-and-miss but I persevered and was able to get it to accept my parameters, i.e. "1 - 2" in range. You have to go into the second ["Printer"] dialogue box each and every time you print, to enable two-sided printing. At last I was able to get it to print pages 1 and 2 of my three-page document. Now maybe I can test-print pages from my 108 page tome! Fingers crossed . . .

How do I create a multi-page doc / add blank pages in PSE 11?

I am creating printable PDF files and up to yesterday I was using a free trial of PSE 10. To create a multi page document I first saved it as a PSE project file, then added blank pages, then when I was done I saved it as a PDF and voila - done!
Now my trial has run out I have bought the paid version (which is now version 11) and I seem to have lost that option entirely. The product is useless to me without a way to create multi page PDFs - can anyone help?
Alternatively can I downgrade back to PSE10 which was fine for me!
Thanks

Thanks - I just spent an hour online to support, they won't refund me until they can work out why it won't allow it in the new version?!! So they have shared my screen and taken my files to be worked on "at the next level" - there didn't seem to be an option to accept that this feature just wasn't available in the version 11, they kept trying to make it do it. Especially as they could open my multi page projects created in version 10 and add pages to them!
Anyway, I would be open to using another free software MichelBParis, but I found it such a steep learning curve to figure out how to do it in PSE10, it would need to be simple. Do you have links to any you could recommend?

Variations of a fixed content multi page Form

Problem Statement:
There are two variations of a fixed content page Form. This form runs for multi-pages say 10 pages of fixed content. One variation has an additional 4 to 5 line fixed text contents enclosed by a rectangular box object at the top of the page right below the title of the Form on the first page and there no other differences Vs the second variation.
Approach:
The form is created using a multiple page Section.
Question:
Can we avoid creation of multiple version of Sections in Documaker with use of any special Studio rules to insert the conditional rectangular box object with the 4 to 5 line contents between the Title of the form and the first paragraph based on a trigger?
Assume that the First version and the second version of the form contents can be differentiated with a trigger or signal say "0" or "1" in the extract.
Edited by: Nirmalgarga on 16 Dec, 2010 12:07 AM
Edited by: Nirmalgarga on 16 Dec, 2010 3:06 AM

Dynamic growing rectangles are supported in Documaker, review the Rule Book for the GorupBegin rule. This rule needs to be implemented at the section level.
A box can also be place around a text area as a border. You can implement this as only one section using a variety of options, however its not clear what is making the section different in the first place. If its variable data then I'd try the border around the text area first - it is the easier option of the two.
The grouping rules were specifically designed to support dynamic rectangles when you have overflow/repeating data versus what could be contained in a text area. There is some additional detail that would be needed to determine the optimal way of implementing this need.

Getting Page Count for a Multi-Page PDF file using Illustrator script?

Does anyone know how to get the page count of a multi page PDF file? I know you can then open each page using the PDFFileOptions (pagetoopen). But I need to know up front how many pages there are to loop thru to open each page and process each page.
Any Ideas?

This script i did for photoshop:
OK so lets do it working on WIN and MAC without any shell script.
This solution is not the best but its working.
I used Try catch to solve it.
Only issue is that you should at least somehow know how many pages you expect in pdf.. this mean if you are working with books or flyers...
Then set the maxPagesCount to that number.
I am working with pdfs with max 20pages.. so i start open the 20 then 19 then 18 and when i am success i know the amount of pages.
Its not the quicker way but its usable.
var maxPagesCount = 20;
var actPagesCount = maxPagesCount;
var opts1 = new PDFOpenOptions();
opts1.usePageNumber = true;
opts1.antiAlias = true;
opts1.bitsPerChannel = BitsPerChannelType.EIGHT;
opts1.resolution = 10; //it will load faster the test page
opts1.suppressWarnings = true;
opts1.cropPage = CropToType.MEDIABOX;
myFunction = function () {
try {
      app.displayDialogs = DialogModes.NO;
      var fileList = openDialog();
      for (i = 0; i < fileList.length; i++) {
        actPagesCount = maxPagesCount;
        getPagesCount(fileList[i],maxPagesCount);
        alert(actPagesCount);
} catch (exception) {
    alert(exception);
getPagesCount = function (checkFile, lastPageID) {
try {
    for (var checkPage = lastPageID; checkPage > 0; checkPage--) {
      opts1.page = checkPage;
      var docRef = open(checkFile, opts1, false);
      docRef.close(SaveOptions.DONOTSAVECHANGES);
      actPagesCount = lastPageID;
      return;
      checkPage=0;
} catch (exception) {
    // Look for next page
    checkPage--;
    getPagesCount(checkFile,checkPage);

Creating Multi-Page PDF from a Layerd Illustrator file (script)

Often times when designing a logo I create different versions and variable options on layers. This can result in several layers in one Illustrator file. Is there an easy way or an existing script that will allow me to (with one click) create a multi-page PDF consisting of all the layers within my .ai file? The current method is turning on each layer, performing a save-as (PDF), then turning off said layer and turning on the next layer and repeating the task and so-on-and-so-forth, etc … It becomes tedious and quite often I save over the previous version, forgetting to re-name it or forget to perform a save on a certain layer. Can anyone help with some advice? I have never written my own script before but am not opposed to trying, where do I begin?
Any help is appreciated.

You don't say what OS you are using and which scripting language you are thinking of doing this in…
This is a sample that may get you started done in JavaScript so it's platform independent with the exception of my 'mac style' file paths.
If your on a PC it may just be a typo to set to C drive or whatever you call them things…
If you are on the mac OS then it should just dump a load of PDF's on your desktop.
You say about a multi-page PDF but don't think Illustrator can do this unless its been added with multi-artboards in CS4?
Others would have to let you know that…
#target illustrator
var docRef = app.activeDocument;
with (docRef) {
var docName = baseName(name)
var pdfOptions = new PDFSaveOptions();
pdfOptions.pDFPreset = '[High Quality Print]';
// Turn all layers off
for (var i = 0; i < layers.length; i++) {
layers[i].visible = false;
// Turn each layer on
for (var i = 0; i < layers.length; i++) {
if (i == 0) {
layers[i].visible = true;
redraw();
var layerName = layers[i].name;
var saveAsPath = new File('~/Desktop/' + docName + '_' + layerName + '.pdf')
saveAs(saveAsPath, pdfOptions);
} else {
layers[i-1].visible = false;
layers[i].visible = true;
redraw();
var layerName = layers[i].name;
var saveAsPath = new File('~/Desktop/' + docName + '_' + layerName + '.pdf')
saveAs(saveAsPath, pdfOptions);
//close(SaveOptions.DONOTSAVECHANGES);
function baseName(fileName) {
var nameString = '';
var extOffset = fileName.lastIndexOf('.');
if (extOffset == -1) {
nameString = fileName;
} else {
nameString = fileName.substr(0, extOffset);
return nameString;

How can you create a multi-page pdf document in photoshop elements 13?

I previously had pse 11 and was able to create multi-page documents as pse files. However, pse 13 does not allow. How can I create multi-page pdf files from pse 13?

Alas, for one of those mysterious adobe reasons, it's gone in recent versions. Only multipage file you can make is a photobook.

Unable to mark the box 'create Multi-page PDF from page tiles' when saving to pdf-file

I am running Illustrator CS3 on a Mac OSX 10.5.8
I want to print a very large illustrator-file (1000 mm x 900 mm) across mutliple pages of A4-paper (5 x 5 sheets of A4-paper) by saving the file as a multi-page pdf file.
I first followed the instructions provided here:
http://helpx.adobe.com/illustrator/kb/create-mutli-page-pdf-illustrator.html
When I then tried to save the file: -> File -> Save as -> 'choose .pdf from drop-down menu'
I get to this menu:
I am unable to mark the box that says: 'Create multi-page pdf from page tiles'. I have made a red arrow pointing to the box I want to mark.
I have tried changing the other drop-down menus inside this menu, to see if the box I want to mark could become available, but without any luck.
I am not sure what I am doing wrong. I would be grateful if anyone could help me set my settings right to allow me to create such a multi-page pdf-file.
Thanks in advance for your help

Your ps file should be good, the problem likely resides elswehere. Maybe in your acrobat install, distillers settings. what error did distiller give?
Mine ran good and got a multi page document, here is a screenshot to help you troubleshoot.
On mac go to system preferences / print and fax / and change your default printer if you have another option. I know sounds like this should not help, but there are problems like Illustrator for example not making .pdfs if you do not have a printer chosen or an old or corrupt .ppd assigned.

TS1702 I wish to save a multi page document sent by e mail as PDF in Pages - it only files the first page? How do I save the entire document ?

I have Pages on my iPad, which is brilliant....but when I want to save a multi page file sent to me by e mail, pages only saves the first page. How do I save the entire document?

What type of document is the file? (ie. what is the file extension for tie file?)
Regards,
Barry

Photoshop CS5 pdf size fine - Bridge Multi page pdf size not fine

I know it must be asked a thousand times but here goes:
PDFs saved by photoshop display the true document size (let's say 70cm width on 72ppi)
When I try to create multi page pdfs fro bridge (thanks Adobe!), no matter how many ways I try to set it up, the image always is small in the center of a white background. Always.
What gives?

Hi,
1. Why dont u try it in pdf itself?
U can just crop the required area in pdf file using crop tool so it can be applied for all the pages at a time.
2. If u trying to remove particular area on a pdf u can place a white box on that area using pitstop tool it can be saved as actionlist like batch processing and applied for any number of pages and files.
Making this in pdf itself won't get u more file size. Size will be as equal as ur source file.
Praveen

Viewing Multi Page tiff files received as email attachments on the iPhone

I have spent hours trying to find a solution or a work-around to the problem of viewing multi page tiff ( .tif) email attachments on my iPhone 3G running 3.0. I have only ever been able to view the first page of these files.
Finally I decided to come up with my own solution. I have recently launched the website www.econvertimage.com. Anyone can now freely email tiff files to the site from their phone. These files are converted to pdf and then returned to the sender for viewing on their phone.
You can set up an auto forward for attachments coming from specific senders if you like. This way you will often receive the converted file at the same time as the original email. Visit the site for further details.
I hope this post may save others the frustration I've endured over the last few weeks looking for a solution.
I'm interested in future improvements people are keen to see for the site. I'll keep developing the functionality if there's a need. I look forward to receiving comments and feedback.
Thanks

Sounds perfect - is it operational? Sent a test message this morning, never received the PDF.

How to Design Multi Page Report in SSRS 2008

Hi All,
I have managed to create a multi page report. When I am preview mode i can see that the report has 2 pages.
But when I am in design view I cannot view the second page. How can I view the second page. Reason being I am trying to create a template where the table for certain data needs to be at the top of the page and some data at the middle and so on.
Thanks in advance.
Aash.
Aash

Hi Aash2,
According to your description, the behavior of cannot view the second page in design view is expected, in another way, there is only one page in design view.
Report Designer supports two views: Design to define the report data and report layout, and
Preview to display a rendered view of the report. If you would like to show a table on the first page, and show the other table on the second page, you can add a page break on the first table like followings:
1. Click the gray handle in the first table, select “Tablix Properties”
2. Click “Add a page break after” check box under Page break options in General Tab
After do above, you can see the first table in the first page, and the other table in the second page.
For more details about report designer, please see the following article,
Working with Report Designer in Business Intelligence Development Studio:
http://msdn.microsoft.com/en-us/library/cc281300(v=sql.110).aspx
If you have any question, please feel free to ask.
Thanks,
Eileen

Multi pages

Similar Messages

Maybe you are looking for