Multi playlist's on different screen names for XP

Right now we have four different play libraries in four different screen names. What I would like to do is consolidate all the libraries into one big library. Is there any way we can do this? The way we have it set up now is... if my wife and my two kids like a song and want to pay for it, they are paying THREE times for the same song!!!!! Our OS is windows XP...Please help before I go broke!!!! Thanks.
Message was edited by: ptdock

You can keep the separate libraries for ease of syncing, but share music among them.
See if this document is of any assistance:
http://support.apple.com/kb/HT1203
CG

Similar Messages

11gr1 - Handling different screen resolutions for an enterprise app.

Hi,
We are developing an enterprise application that will be deployed at different clients with different hardware.
We are confused about how to handle different screen resolutions and wonder how others are handling this.
We have some fixed size areas in our screens and liquid areas for content that may expand. The problem is say that you have a table with 6 columns. This table will be rendered nicely at 1280X800 but not at 1650X1050 or 800X600.
At higher resolutions we will either end up having some blank space or expand one of the columns of the table , but can't expand every column proportionally and this will look ugly.
For lower resolutions same problem in a different way will come into picture, we will not able to resize the columns and end up with scroll bars etc ...
What is the best practice with handling different screen resolutions for components like table,panel splitter etc ?
Thanks

Hi Muhammed,
I don't think that any better solution exists, you already use liquid layouts and define widths & heights with percentages etc. In my opinion using blank column at the end of table columns makes table's looking better. Additionally creating custom skin for table and defining column heights & widths with % or em may help you to stretch columns?

IChat screen name for .Mac member

My family are all .Mac members and have accounts. We are a little hesitant to do AIM services through AOL (hate to provide information) and would prefer to use iChat with our .Mac accounts. I can't figure out if it is possible to use an alias, just for iChat purposes, to avoid using an email address or any of my regular .Mac names. Can one use a screen name in iChat, through .Mac. If so, how does one create it.
Both my daughter and I have tried using different nicknames, but our .mac email addresses still show up in the iChat windows. Is this only to .Mac members, or to everyone?

Hi
The one I look at does not ask all that.
Post code/Zip Code and email address and a "Security Question" of your Choice.
How do you expect then to know it is really you if they don't ask ?
9:31 PM Thursday; January 3, 2008

Separate 'itunes' / 'iOS launch screen' names for apps?

I've noticed many apps I have display one name in itunes and a different name in the iOS launch screen. I wish to do this for my app because my app name is too long and gets truncated in an ugly way. So there is the <name> tag which seems to apply the name to both. Is there a separate tag for just the iOS launch screen name?
Thanks

Hi jayxtee
I've no idea why this happens, or how to fix it, but I did find a couple of workarounds which I've detailed in a blog post here: iTunes 11 and 12 Not Updating iDevice Apps Automatically. There are not the most elegant of solutions, but I hope they help a bit...
Duke

Error "no valid screen name" for FM DYNP_VALUES_READ

Hi PM Experts and ABAPers,
I have a requirement to fetch Operation tab details dynamically while creating a order through IW31 transaction.
I have tried using Function module DYNP_VALUES_READ to fetch the screen field values dynamically to read the Work centre field value from operations tab.
Please look at the code i have used.
DATA: gv_program_name TYPE D020S-PROG VALUE 'SAPLCOIH',
             gv_screen_no    TYPE D020S-DNUM VALUE '3010',
             gs_dynpread     TYPE DYNPREAD,
             gt_dynpread     TYPE TABLE OF DYNPREAD.
clear gs_dynpread.
gs_dynpread-fieldname = 'AFVGD-ARBPL'.
APPEND gs_dynpread TO gt_dynpread.
   CALL FUNCTION 'DYNP_VALUES_READ'
     EXPORTING
       DYNAME                               = gv_program_name
       DYNUMB                               = gv_screen_no
     TABLES
       DYNPFIELDS                           = gt_dynpread
- The function module has returned a dump with error 'No valid screen name'.
Can anyone help me in reading the work centre ( ARBPL) value directly from screen.
Thanks in advance,
Sreenivas

Hi Sreenivas,
Kindly check whether field-symbol is assigned before using for preventing the run-time error.
ASSIGN('(MP000800)TBLGART[]')TO<tblgart>.
"Check Whether the field-symbol value is assigned or not
IF <tblgart> IS ASSIGNED.
CREATE DATA obj_tbl LIKE LINE OF <tblgart>.
ASSIGN obj_tbl->* TO <wa_tblgart>.
ENDIF.
In CREATE DATA statement we are assigning the structure, if you know the structure name, it is better use TYPE statement instead of LIKE statement as shown below.
CREATE DATA obj_tbl TYPE STRUCTURE_NAME.
Regards
Rajkumar Narasimman

How do I put my buddy list on a different screen-name?

Hello,
I have a screen-name on iChat, and then decided to get another one. Is there an easy way to get my first buddy list onto my second buddy list?
Thank you.

Hi Dice333chill,
There are two main ways.
1) With the AIM applictaion there is a facility for saviing the Buddy list to your comuter and then chaing the Account and importing th e list.
2) The Second way is make sure your Buddies are identified in the Address Book as Buddies in some way and then dragging them back to the new ichat Buddy List.
There is one problem with the scond method and that is some Buddies with just accounts names in the Buddy list do not show up in the Address Book until more info is added to their Address Card in iChat. These Buddies will need you to do a Get Info on them (Click once on the Buddy and then use the Apple Key and i Together and select Address Card from the drop down in the window that appears). You will need to Add eitehr Real names or some other unique identifier to show up in the address Book.
The problem with the first method may be the need to download AIM
The actual iten you need is in the File menu as Export.
So the real answer is no.
Ralph

Screen name for iChat

I started up iChat and used my .mac information to set it up. But i want my screen name to be my old AIM screenname not my @mac.com So my question is does anyone know how i can change it so I can use my AIM screen name? Thanks for your time.

nevermind found it, up left hand corner click ichat and then accounts and its simple from there...

[solved]Different Screen Resolution for different Users[/solved]

hello
i'm running kdemod
i'd like to set up an account for my mum
she prefers a resolution of 800X600
whereas i like 1024X768
my xorg.conf is set up like
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1024x768 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
when i log into the newly created account and use nvidia-settings
the resolution can be changed successfully
but upon restarting
it reverts back to 1024X768
i'd like to know how i could set up different resolutions for both of us
Last edited by nikbhardwaj (2009-10-03 12:23:21)

arkham wrote:You could add a startup script for your user with "xrandr -s 1024x768", while adding another for your mother account with "xrandr -s 800x600"
where do i add this
.xinitrc in the home directory ??
or .xsession in the home directory

Different ID names for Apple and iCloud

I apparently created my iCloud account with a different email address than I did my Apple account. I thought I knew which email address I might have used to create the iCloud account, but I am not being allowed to sign in. I there any resolution to this?

To make maters worse, I found something that may have been what I used as my log in, but now its says my account has been locked for security reasons, and when it asks to verify my personal information, the date of birth I entered isn't being recogninized. What the heck?!

Different network name for Express and Extreme

I extend wifi range from Extreme by using Express. It works and the wifi network name is the same (so any devices can connect to wifi with same credential).
Can I change the wifi network name of Express (different than wifi name of Extreme)? Since express supports up to 10 devices so I will only let some devices connect to Express's range.
Thanks.

Unfortunately, Carolyn Samits advice will only allow you to change the Base Station or "device" name of your AirPort routers.......not change the name of the wireless network.
I extend wifi range from Extreme by using Express
If the AirPort Express connects to the AirPort Extreme using a wireless connection, then you cannot change the wireless network name on either device and have the network extend.
However, if you have the AirPort Express connected to the AIrPort Extreme using a wired Ethernet connection.....and you are extending that way.....then you can change the name of the wireless network on either the AirPort Express or AirPort Extreme.
Please post back to clarify how you have the AirPort Express configured to 'extend"......wireless or Ethernet.

How do I change screen name for AppStore??

I'm really confused. I have disabled ping on my iPod, and when I try editing my account under iTunes/AppStore it won't let me change my nickname, only my email. This is my 2nd account, and when I try posting a review It just says "This nickname is taken, please choose another." Please help and thanks in advance!

If you mean you created the iCloud account example and now want it to be called new-example you can't. Your only choice would be to create a new iCloud account. You can, however, log onto iCloud.com, select Mail, click on the gear in the upper left corner and select preferences. From there you can create an alias email account called new-example. It doesn't change your icloud account name but you can give out that email address instead of your account name.

Benefit of having different network names for n- b/g networks on new AEBS?

This option is available when selecting simultaneous dual-band on the new AEBS, but I'm not sure of the benefit?

There are two main reasons you might want to do this:
1) You want to manually force your "n" devices to connect only to the "n" network regardless of signal strength.
2) You use your system in an area where signal strength varies such that your system switches back and forth between the 802.11b/g and 802.11n networks frequently.
You might also want to do it if you are for whatever reasons having problems with the AirPort driver's auto-switching.

Different away messages for each screen name signed on.

It is possible to use different away message for different screen names all signed on using iChat? I have a home screen name, work screen name, and school screen name, and would like to not have one away message for all three.

No.
4:34 PM Tuesday; February 12, 2008

Use different column Name in Analytic View depending by logon session language

Hi everybody.
Is it possible to have different column names for ONE single Analytic View column depending by the Client session language?
For instance:
- we have one (only one) column name let's say that is 'fatturato' (for an Italian Client session) and 'invoiced' (for an English Client session) etc.. etc..
in other word the 'column name' changes depending by the language but the column is only 1 (one).
Is it possible to manage this and how? In SAP Hana Studio?
Is it possible to store in some way the different names of that column and relate them to the column itself?
Thank you in advance
Best regards.
Sergio

Hi Sumeet.
We already did your suggestion...
But after the action:
" tab--> Migrate--> Add---> OK"
what do you have to do to have a multi-language column naming?
Let's say we have a column name = 'product' (in English).
We'd like to have for the same column also the following name:
- 'prodotto' -> for Italian
- 'produit' -> for French
- 'produkt' -> for German
.. and so on
depending by the Client session language (and this has to be done automatically of course).
How this can be achieved?
Thank you
Sergio

Can't get rid of old screen name in iChat

when I first got my iMac a couple years ago, I was experimenting with the apps, including iChat. In iChat, I setup an account using a screen name that I no longer want to use, but when I try logging into iChat using the AIM account with the screen name I want, the "user name" that shows up in iChat is the first one I used when I was experimenting for the first time with iChat.
How do I get rid of this old, unwanted screen name? I tried clicking on the minus sign in the list of users to delete the account and tried signing up for a new iChat account using my AIM screen name/password; neither worked (when I tried logging in with my AIM info and clicking on the button to set up a new iChat account, I got sent to the AIM web site that wanted me to input all my info again then sent me to the site to download AIM - which I already have.) I could find nothing in the iChat preferences other than the minus sign I referred to but that won't allow me to definitively delete the unwanted screen name/handle.
Is there some place I can find the iChat preferences in the system folder, maybe, and delete them so next time I start iChat a new, blank set of preferences will be opened that will allow me to set the username I want? If this will work, where is this file located?
Thanks.
P.S. I got Skype recently to try, but like some of the features in iChat so would rather use iChat if I can get it to use the name I want and have with AIM.

Hi,
Pic first
Handle = Screen Name.
Name = Your Details as per your My Card (Head and Shoulders iCon) in the Address Book - Or the User that is Logged in to the Mac.
Each Buddy List will show the same Name but a different Handle based on the Screen Name for that Buddy List.
If you only have one Buddy List (other than the Bonjour One) and you Delete it then the Buddy List Disappears - Problem Solved. (Presumably you are re-adding a New Screen Name ?)
Pic of the Minus Button I am talking about.
Multiple Buddy List are created by adding more then One Screen Name to the Accounts List (Previous Pic)
I am a little confused where you were when you did this:-
I tried clicking on the minus sign in the list of users to delete the account and tried signing up for a new iChat account using my AIM screen name/password;
"List of Users" sounds like you were in System Preferences > Accounts.
You can "Delete" an Account here. It is not actually removed from the Users Folder (Hard Drive/Users) but is locked in a way that no-one has access and they are Removed from the Login Screen when the Mac Starts Up.
DO NOT DELETE ANY CLOSED ACCOUNT FOLDER In the Users Folder.
But if you use the same Screen Name in another Mac User Account the same Handle will appear.
You will see my GoogleTalk Account is headed "GoogleTalk" and my AIM Account as "Main AIM Account" These are set in the Description field in the iChat > Preferences > Accounts.
The Default if you have one account that logs into AIM is for it to read "AIM Buddy List"
Similar for one Jabber Account.
With more accounts of any one type they take on the info in the Description Field - which itself by default is the Screen Name.
Are you trying to create a New Mac User Account and use the same AIM Screen Name there ?
Are you trying to just change AIM Screen Names ?
8:05 PM Wednesday; December 29, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Multi playlist's on different screen names for XP

Similar Messages

Maybe you are looking for