Multi provider is not getting exact data.

Hi Experts,
I am working on BW, I have created a Multi provider with three cubes and one ODS, I have added total 16 objects in this Multi provider, while I am executing this Multi provider in LISTCUBE it is showing only four fields data, all fields are having data but in listcube 12 fields are showing empty.
How can i get the remaining fields data also,
Please help me to get the data,
Helpful answer will be appreciated with full points.
Thanks in advance,
Venkat.

Hi,
Check that there is data in the cube that is available for reporting.
Try to include 0INFOPROV in the query to verify the InfoProvider from which data is being pulled.
Try a LISTCUBE on the cube to see that it contains data as per the filters, or selections in the query.
Also check this link..
Multiprovider showing data from only one underlying object?
Hope this helps u..
Best Regards,
VVenkat...

Similar Messages

How to get exact date using to_date

Hi all
how to get exact date over there
select TO_DATE(TRUNC(PLLA.CREATION_DATE),'DD-MON-YYYY'),TRUNC(PLLA.CREATION_DATE),round(PLLA.CREATION_DATE),
TO_DATE(round(PLLA.CREATION_DATE),'DD-MON-YYYY'),TO_DATE(PLLA.CREATION_DATE,'DD-MON-YYYY'),PLLA.CREATION_DATE,
TO_DATE(TRUNC(PLLA.CREATION_DATE)),TO_DATE(round(PLLA.CREATION_DATE))
from po_line_locations_all plla.
In one of the plsql program i want to compare the creation date with given date where as creation date is in Timestamp format

Hi,
Use trunc or to_char with masking like 'dd/mm/yyyy' format. If this does not solve your problem then do post your sample input and sample output. As I am unable to make out what is your actual problem.
Regards

Refernce Nav igational Attribute is not getting the data in Infoprovider

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of ZPSBUSA, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object ZPSBUSA .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of 0WBS_ELEMT, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object 0WBS_ELEMT .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash
Edited by: MarkSubhash on Dec 9, 2011 11:11 AM

I am not getting the data in Bex from the cube

Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
Bhaskar

Hi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
 As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
 i0008 like p0008,
 l_v_ANSAL type ANSAL_15,
 l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008. -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn. --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
 i0008 like p0008,
 l_v_ANSAL type ANSAL_15,
 l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
 i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
 i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
 i0008 like p0008,
 l_v_ANSAL type ANSAL_15,
 l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

Why the 2LIS_08TRTK extractor can not get all data

Hello, BW Gurus.
Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.

Is it because

Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.

- from oss note 573470.

SAP Fiori Purchase Order not getting any data & getting a 404 Error Message

Hi
I have downloaded Purchase Order SAPUI5 code from SAP Fiori server. import it into Eclipse then try to run that Apps/code(SAPUI5) from browser.
1) Not getting any Data.
2) It show 404 Error Message.
3) Its show wrong User Name as Login

Hi Pankaj,
First question :
Are you able to get the data in Fiori ?
Secondly,
You have mentioned as Purchase order, but here you have given snapshot of Purchase requisition app, and you are calling also purchase req app from the browser. Please clarify
If you have mistakenly written PO : If you are still not getting data for Approve Purc req, then check if your RFC connections are proper from Gateway to backend and backend to Gateway.
If RFC is working fine, check the Remote logon, it should be marked as Current user. If its not marked as current user, then it will show some other user.
Regards,
Tejas

Do not get any data from 0CA_IS_TS_1 and 0CA_IS_TS_2 data source

Hi all,
We are trying to populate cubes(0CATS_C01) and (0CATS_C02) for which data sources are 0CA_IS_TS_1 and 0CA_IS_TS_2 respectively. We activated business content for these data sources. When we run these data sources in RSA3 we do not get any data even though we have data in the repective tables. We applied SAP Note :1586467, which says (Note 1586467 - Extractor 0CA_TS_IS_1 returns no data), Can you please help me out in knowing if we are missing some thing?
Thank you,
Bob.

Hi,
To use this DataSource you must have implemented Support Package SAPKH46C32, or have made the relevant corrections in SAP Note 509592.
Pl check you have required data as mentioned below
When transferring time sheet data to the Business Information Warehouse (BW), you must note the connection between the following data sources:
· CA_TS_IS_1 (Time Sheet Data (Approved))
Documents are written in the SAP R/3 system for Time Sheets with status 30 (approved). The documents log the changes that have been made to data records.
Therefore, the SAP R/3 system can perform a delta update for this data source. The system only transfers newly approved data records and changes that have been made to existing data records. At the same time, the SAP R/3 system notes the date of the last delta transfer.
· CA_TS_IS_2 (Time Sheet Data (Released for approval))
The SAP R/3 system does not write documents for Time Sheet data with status 20 (released for approval). This means that changes made to these data records are not logged.
Therefore, the SAP R/3 system always performs a complete transfer of data records that have been released for approval. The number of data records that need to be transferred usually remains constant because in the period between two transfers not only new data records are added but other data records are also approved. Therefore, system performance is not restricted.
Thanks and regards

New Server - Not Getting Event.Data back

Its a weird problem i'm having. I've setup a brand new server (Original was a shared hosting setup from godaddy).
I'm using my same application
And i'm not getting event.data info back (in XML form)
Here's an example:
private function onUploadCompleteData(event:DataEvent):void {
updateStatus(event.data, _numCurrentUpload - 1);
var x:XML = new XML(event.data.toString()); <---- NOT FIRING
Application.application.upAvatar = "/profile/" + x.name;
Does anyone have any ideas? I was thinking it could be a misconfiguration with my apache settings.
I'm using:
Ubuntu
Apache2
PHP5
CURL
Thanks..

hi,
have you placed a fault event handler on your request to see what error if any is being returned ?
David.

XL Reporter not getting any data

Hi
When I am using XL Composer and generating report using it, I am getting data what the fields I have dragged. Not getting any data when generating same report in organizer from composer except the Title field names. Before I got but now I am not getting.
STEPS Taken
 XL Reporter Composer Tool bar
 Generate
 Generate(Window)(Name: given Sample & checked Generate report then ok)
And having another problem when generating sample reports I am getting data and when editing that report are preparing new with some fields, I am not getting any data.
Example: I have made Edit of Bank Book and placed extra field Document No, saved the report and generated I am not getting any data except titled fields.
 In new report I have taken BP Code and sales Employee I am not getting any data.
Please Can any one help me, It is urgent.
Thanks in Advance.
Urs
Sindhu

If you did not select any "total" field (quantities, totals, etc), XL Reporter will show data only at report composer. It will not work at final XL Report itself.
This is a normal behaviour of XL Reporter, unfortunetaly.
If you are trying to create a simple list of records, I suggest to use Query Generator, combined to PLD in order to get a formatted report.

DataSource 0CRM_SRV_PROCESS_H is not getting the data in infopackage

Hi Masters,
I have to upload the data from the datasources 0CRM_SRV_PROCESS_H and 0CRM_SRV_PROCESS_I into Infopackages, but when i execute the infockage it shows
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
In CRM system when i checked it in RSA3 it is showing the data.
I checked the older posts but i havn't find any answer post. I also checked the SAP note 692195, but it is applicable for 4.0. I am working on 7.0.
Please suggest something so that I can get the data into infopackage.
Thanks and Regards,
Vicky.

Hi Lokesh,
Thanks for your reply.
Actually i am working on such a project where they don't give SAP_ALL authorization to any user. If we need any authorization we need to show them particular SAP note of same version in my case it is CRM 7.0. If you know any note on CRM 7.0 which gives all the authorization objects required or it says we need SAP_ALL authorization please tell me.
It will be very help full for me to get the authorization.
Regards,
Vicky.

Help: Not getting all data from text data type

Hi there
I have a stored procedure that returns a couple of fields and one of the fields is of datatype TEXT. In my ResultSet, I do not get all the data back that is stored in the TEXT datatype. I have say about 600 charactors in this field, but only 30 charactors are returned. Is there a reason why this is happening and how can I fix it?
Please help?
Thanks

I set that field to have a normal string of about 50 charactors. Namely: "this is a note that is about 49 charactosrs long." (exclude the quotes). And I still got 30 charactors back only.
I set a shorter text value of 21 charactors and that returned all 21 charactors.
The text that is usually in this field is:
"URL=SubsidiaryNarrative.html�BABY_CARE_PRODUCTS=false�AIDS_FOR_PHYSICALLY_DISABLED=false�SPORT_SUPPLEMENTS=true�NATURAL_REMEDIES=false�COSMETICS_FRAGRANCE=false�WOMANS_HEALTH=false�ADDITIONAL_CARDS=No�EXERCISE_ROUTINE=Yes�NUMBER_OF_CHILDREN=0"
And I got out "URL=SubsidiaryNarrative.html�B"

All iPhone 4's in building not getting 3G data, but all older iPhones are

A few people in our office purchased new iPhone 4's over the weekend. All of us were 1st gen through 3GS iPhone users.*
Everyone who has the new iPhone can't get any data over 3G, but all 3GS or older phones are pulling data as normal. I don't think it's a signal attenuation/bumper issue as I'm getting 5 bars.
I spoke with both Apple and AT&T a few times. Apple is as confused about it as I am and AT&T suggested I return the phone and try another (obviously not the problem).
If I drive a mile down the road, 3G works fine.
We're at a bit of an impasse; we have 30 days to return the phones and we all love our old iPhones and have no interest in using anything else, but if we can't resolve the issue, I'm not sure what options we're left with. Has anyone else had this problem?
*these are all personal accounts, not business, so you can rule out an account issue

Bryann wrote:
This issue is tied, from my experience, to the base band change in iOs4 of how the iP4 is connecting to the least congested tower vs. the stronger signal tower. If you think about it towers aren't that close together so if the closest tower is overloaded and the iP4 is connecting a tower that is not as congested but is two, or farther, miles away you may still technically have 3G service but your not going to be able to connect data wise. This is a major issue and hope I Apple finds a compromise between the old method and the new of how the iP4 connects to towers.
interesting. if you don't mind me asking, you said "from my experience"....you've seen this problem before?
was this change in 4.0 or 4.0.1 (which looks like it could be the culprit)?

Not getting correct data for newly added field in 0FI_AR_4

Hi to all,
I have added SPART field from VBRK table into 0FI_AR_4 datasource .
Based on join BSID-VBELN = VBRK-VBELN to get SPART from VBRK table.
but i found that some VBELN are not maintained in VBRK table, But are Present in BSID table, so i am not get SPART for which no
VBELN maintained in VBRK.
Please can any one tell me, what condition should i take to get SPART from VBRK to 0FI_AR_4.
as i knew that only BSID-VBELN = VBRK-VBELN sufficent to get data for SPART.
or any different condition i required.
I shall be thankful to you for this.
Regards
Pavneet Rana

Thanks for reply,
i have written code for that like that.
SELECT SINGLE * FROM VBRK
WHERE VBELN = <fs_d>-VBELN .
if sy-subrc = 0.
<FS_D>-SPART = VBRK-SPART.
endif.
ENDLOOP.
according to it result are not capturing all SPART from VBRK. as it only matches the VBELN which are same in both VBRK and BSID table.
so how to get SPART from VBRK if same VBELN is not maintained in both tables.
Please can you tell me CODE for that.
I shall be thankful to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Feb 1, 2011 4:53 AM

How to get exact date and time difference?

Hi,
When i am using the below sql statement:
SELECT (TO_DATE('7/27/2006 05:00:15 PM','MM/DD/YYYY HH:MI:SS PM') - to_Date('7/27/2006 8:30:13 AM','MM/DD/YYYY HH:MI:SS AM')) * 24 hours FROM DUAL;
the output is:
Hours
8.50055555555556
But Actually it is 8.30
So how can i get exact days and time difference between two dates in Oracle?
Thanks....
Regards,
Suman Sakinala
Edited by: SSN on Sep 19, 2008 1:27 AM

Or more clearly (this time I have my date_from and date_to the right way around hehe!)
SQL> ed
Wrote file afiedt.buf
1 WITH t as (select TO_DATE('7/27/2006 05:00:15 PM','MM/DD/YYYY HH:MI:SS PM') as dt_to,
2                    TO_DATE('7/27/2006 08:30:13 AM','MM/DD/YYYY HH:MI:SS AM') as dt_from FROM DUAL)
3      ,d as (select (dt_to-dt_from)*24 as diff_hrs from t)
4 -- end of dates
5 SELECT TRUNC(diff_hrs) as hours
6        ,TRUNC(((diff_hrs) - TRUNC(diff_hrs))*60) as mins
7        ,TRUNC(((((diff_hrs) - TRUNC(diff_hrs))*60) - TRUNC(((diff_hrs) - TRUNC(diff_hrs))*60))*60) as secs
8* FROM d
SQL> /
     HOURS       MINS       SECS
         8         30          2
SQL>

Multi provider is not getting exact data.

Similar Messages

Maybe you are looking for