Multi Question: Windows Server 2008 NFS client / NTFS/FAT32 Disk not seen..

1) Sharing an NFS export with Windows server 2008, HowTo Please?
2) I have a second IDE disk installed in the system but solaris doesnt see it and i dont konw how to find it as im a linux guy and alot of the tools arnt the same. This disk contains one FAT32 partition which i presume wont be a problem but also contains an NTFS partition. Ideas / Instructions please?
3) The system also has a second, Gb, D-Link DGE-528T Ethernet card. This also isnt recognised atall in anything i can think of.
I know these are all fairly basic questions for this forum but i would appreciate the advice of some experts, thankyou for your time.
Edited by: Bolster on Jul 25, 2008 11:48 AM to add network card details

Hi,
Do you mean that USB drives to and mounted VHDs all cannot be formatte? If so, please first check if the disks can work on another computer.
If it can work properly on another computer, please refer to the the similar thread to troubleshoot the issue:
Virtual disk manager - can't initialise external hard drive
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/virtual-disk-manager-cant-initialise-external-hard/42b81b58-13be-4e39-b59e-3c3fe2df6962
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Unable to install the security patches KB2677070 in Windows Server 2008 R2 SP1 (The update is not applicable to your computer)

Dear everyone,
We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
http://support.microsoft.com/kb/2677070
Thanks,
Users

Hi,
According to this KB article, there are many exceptions where this KB is not applicable.
Please perform the following steps:
Expand the “For all supported…” title in the File Information section in the KB article.
Find Crypt32.dll.mui files on your machine.
Then compare the file version, file size, data and time with the ones listed in the KB article.
If there is a match, then this KB doesn’t apply to your machine, which is by design.
Hope this helps.
Best Regards,
Amy Wang

Cold fusion 9 Installation on Windows server 2008 (IIS 7.0) - IIS websites not working ?

I am having a 64 bit machine on which windows server 2008 R2 is installed. IIS 7.0 is configured and running on it. on which I have my organisations main website. I have to install Cold fusion on this machine as some of my site pages are designed with CF.
I used all the default settings for installing cold fusion 9. It got completed succefully. But after I restarted my system and tried accesing my ASP.net website it was not loading the page. Text getting displayed was only as follows '<script> src="'. Later I unsistalled CF and my site was working fine.
Please can any one guide me to successfully install Cold fusion without disturbing my main site deployed on IIS ?

Sarfarajms, I don't recognize what about the CF install would conflict with ASP.NET, but I'll note this:
If you downloaded CF 9 recently, you are still running 9.0--which does NOT formally support IIS 7. If you followed the steps about enabling IIS 6 compatibility and such (in the install guide or some blog entry), perhaps that caused the conflict.
Instead, you will want to install 9.0.1 (CF 9 Updater 1, which is NOT provided in the current 9.0 install). THAT is the first release to formally support IIS 7. And if you read the updater installation guide (http://www.adobe.com/support/documentation/en/coldfusion/901/cf901install.pdf), it discusses how to deal with the upgrade depending on what you had done with respect to IIS, starting at the bottom of its page 8.
Hope that helps.
/charlie

SSTP problem on Windows Server 2008 r2, clients getting error 0x8007274C

PROBLEM: Clients keep getting error 0x8007274C when attempting to connect to the VPN server using SSTP.
SYMPTOMS:
- L2TP connections works great
--- L2TP connections generate RemoteAccess events in Event viewer, but none whatsoever for the failed SSTP attempts
- Client CANNOT ACCESS
https://vpn.mycompany.net/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}
- After several attempts to check and recheck RRAS Setup. Added IIS Role (much later) just to prove that cert is valid.
--- If server's RRAS service disabled, IIS enabled, client is able to browse to that VPN server, certificate checks out.
http://vpn.mycompany.net &
https://vpn.mycompany.net.
--- However, if RRAS service is running, IIS would not respond to either HTTP nor HTTPS traffic.
--- SSTP won't work whether or not WWW service is running.
- Port Scanner tests to the VPN Server reveals that port 80 & 443 are not open when RRAS service is running and IIS service stopped.
--- But, when RRAS service is stopped and IIS is running, port 80 & 443 responds.
--- Not sure whether 443 is [b]supposed to be open[/b] when only RRAS is running.
============================================================================
CLIENT:
============================================================================
- Vista SP1 (32-bit), Windows 7 (32-bit), Windows 7 x64 SP1
- CRL entry is resolvable
- vpn.mycompany.net certificate installed in Local Computer > Trusted Root CA
- SSTP Client connecting to FQDN vpn.mycompany.net
- Windows Firewall is DISABLED (for testing purposes)
- No Anti Virus nor Anti Malware protection running (for testing purposes)
- Can access other HTTPS sites
============================================================================
SERVER (Windows 2008 Svr r2; Roles: DNS, AD, RRAS):
============================================================================
- 2 NICS (1 bound to an internal IP, 1 bound to an external IP addr)
-- External NIC bound to a valid ISP IP Address, with a FQDN vpn.mycompany.net
- Windows Firewall Service on Server DISABLED
- No other device in front of the external IP addr NIC
- IPV6 on RRAS DISABLED
- NO RRAS Inbound/Outbound filter at all
- Windows Firewall Service disabled
- Using external Certificate Authority
- Certs bound to port 443 seem to match in registry key HKLM\...\SstpSvc\Parameters
It seems that the VPN server is simply not accepting the SSTP traffic. I don't think we've even gotten to certificate negotiation.
Been trying for a few days now, have consulted many SSTP online resources (MS and others) before posting.
Am stumped. Any help would be greatly appreciated.
============================================================================
SERVER CONFIGURATION CHECKLIST:
============================================================================
SERVICE_NAME: remoteaccess
        TYPE               : 20 WIN32_SHARE_PROCESS
        STATE              : 4 RUNNING
                                (STOPPABLE, PAUSABLE, ACCEPTS_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
============================================================================
SERVICE_NAME: sstpsvc
        TYPE               : 20 WIN32_SHARE_PROCESS
        STATE              : 4 RUNNING
                                (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
============================================================================
TCP    0.0.0.0:443            0.0.0.0:0              LISTENING       4
TCP    192.168.2.109:3268     192.168.2.116:45443    ESTABLISHED     500
TCP    [::]:443               [::]:0                 LISTENING
4
UDP    0.0.0.0:59443          *:*
1616
UDP    0.0.0.0:60443          *:*
1616
UDP    0.0.0.0:61443          *:*
1616
============================================================================
SSL Certificate bindings:
    IP:port                 : 0.0.0.0:443
    Certificate Hash        : 4cbfd1fc43d4fea1cd9dce519a0c0901330a343d
    Application ID          : {ba195980-cd49-458b-9e23-c84ee0adcd75}
    Certificate Store Name : MY
    Verify Client Certificate Revocation    : Enabled
    Verify Revocation Using Cached Client Certificate Only    : Disabled
    Usage Check    : Enabled
    Revocation Freshness Time : 0
    URL Retrieval Timeout   : 0
    Ctl Identifier          :
    Ctl Store Name          :
    DS Mapper Usage    : Disabled
    Negotiate Client Certificate    : Disabled
    IP:port                 : [::]:443
    Certificate Hash        : 4cbfd1fc43d4fea1cd9dce519a0c0901330a343d
    Application ID          : {ba195980-cd49-458b-9e23-c84ee0adcd75}
    Certificate Store Name : MY
    Verify Client Certificate Revocation    : Enabled
    Verify Revocation Using Cached Client Certificate Only    : Disabled
    Usage Check    : Enabled
    Revocation Freshness Time : 0
    URL Retrieval Timeout   : 0
    Ctl Identifier          :
    Ctl Store Name          :
    DS Mapper Usage    : Disabled
    Negotiate Client Certificate    : Disabled
============================================================================
Selected (some, not all) Info about Certificate bound to SSTP viewed through RRAS MMC:
Version: V3
Valid To: ‎Thursday, ‎August ‎30, ‎2012 6:59:59 PM
Subject:
CN = vpn.mycompany.net
OU = nsProtect Secure Xpress
OU = Domain Control Validated
Enhanced Key Usage:
Server Authentication (1.3.6.1.5.5.7.3.1)
Client Authentication (1.3.6.1.5.5.7.3.2)
CRL Distribution Points:
[1]CRL Distribution Point
     Distribution Point Name:
          Full Name:
               URL=http://crl.netsolssl.com/NetworkSolutionsDVServerCA.crl
Thumbprint Algorithm: sha1
Thumbprint: ‎4c bf d1 fc 43 d4 fe a1 cd 9d ce 51 9a 0c 09 01 33 0a 34 3d
============================================================================
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SstpSvc\Parameters]
"ServiceDllUnloadOnStop"=dword:00000001
"ServiceDll"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,\
00,74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,\
73,00,73,00,74,00,70,00,73,00,76,00,63,00,2e,00,64,00,6c,00,6c,00,00,00
"ServerURI"="/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/"
"ListenerPort"=dword:00000000
"UseHttps"=dword:00000001
"SHA1CertificateHash"=hex:4c,bf,d1,fc,43,d4,fe,a1,cd,9d,ce,51,9a,0c,09,01,33,\
0a,34,3d
"isHashConfiguredByAdmin"=dword:00000001
"SHA256CertificateHash"=hex:ee,06,d8,78,2a,8c,95,d6,a1,40,d1,80,77,2c,e5,4c,f9,\
83,a1,e4,94,60,82,28,3d,56,49,82,44,bc,1e,a9
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SstpSvc\Parameters\ConfigStore]
"ListenerPort"=dword:000001bb
"UseHttps"=dword:00000001
"V4CertPlumbedBySstp"=dword:00000000
"V6CertPlumbedBySstp"=dword:00000000
============================================================================
SELECTED EVENT VIEWER ENTRIES AFTER RESTART OF RRAS + SUCCESSFUL ATTEMPT OF L2TP (BUT NO ENTRIES AT ALL FOR SSTP CONN ATTEMPTS):
Level Date and Time Source Event ID Task Category
Information 8/31/2011 11:36:42 AM Microsoft-Windows-Time-Service 37 None The time provider NtpClient is currently receiving valid time data from zeus.olympia.local (ntp.d|0.0.0.0:123->192.168.2.114:123).
Information 8/31/2011 11:35:22 AM RemoteAccess 20275 None CoID={075CE235-832C-45FE-BE27-8B41BC765125}: The user with ip address 192.168.2.145 has disconnected
Information 8/31/2011 11:35:22 AM RemoteAccess 20272 None CoID={075CE235-832C-45FE-BE27-8B41BC765125}: The user OLYMPIA\inul connected on port VPN2-15 on 8/31/2011 at 11:34 AM and disconnected on 8/31/2011 at 11:35 AM. The user
was active for 0 minutes 32 seconds. 17264 bytes were sent and 21956 bytes were received. The reason for disconnecting was user request. The tunnel used was WAN Miniport (L2TP). The quarantine state was 'not nap-capable'.
Information 8/31/2011 11:34:57 AM Microsoft-Windows-Iphlpsvc 4200 None Isatap interface isatap.{6E06F030-7526-11D2-BAF4-00600815A4BD} with address fe80::5efe:192.168.2.144 has been brought up.
Information 8/31/2011 11:34:51 AM Microsoft-Windows-UserPnp 20003 (7005) Driver Management has concluded the process to add Service tunnel for Device Instance ID ROOT\*ISATAP\0002 with the following status: 0.
Information 8/31/2011 11:34:50 AM RemoteAccess 20274 None CoID={075CE235-832C-45FE-BE27-8B41BC765125}: The user OLYMPIA\inul connected on port VPN2-15 has been assigned address 192.168.2.145
Information 8/31/2011 11:34:50 AM RemoteAccess 20250 None CoID={075CE235-832C-45FE-BE27-8B41BC765125}: The user OLYMPIA\inul has connected and has been successfully authenticated on port VPN2-15.
Information 8/31/2011 11:34:49 AM RemoteAccess 20088 None The Remote Access Server acquired IP Address 192.168.2.144 to be used on the Server Adapter.
Information 8/31/2011 11:30:26 AM Microsoft-Windows-HttpEvent 15007 None Reservation for namespace identified by URL prefix
https://+:443/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/ was successfully added.
Information 8/31/2011 11:30:26 AM Microsoft-Windows-HttpEvent 15008 None Reservation for namespace identified by URL prefix
https://+:443/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/ was successfully deleted.
Information 8/31/2011 11:30:26 AM Service Control Manager 7036 None The Application Layer Gateway Service service entered the running state.
Information 8/31/2011 11:30:26 AM Service Control Manager 7036 None The Routing and Remote Access service entered the running state.
Error 8/31/2011 11:30:26 AM RemoteAccess 20106 None "Unable to add the interface {BBF2BA88-DCC5-4D36-9256-E1C8AF602467} with the Router Manager for the IPV6 protocol. The following error occurred: Cannot complete this function.
Error 8/31/2011 11:30:26 AM RemoteAccess 20106 None "Unable to add the interface {DF914ECC-AC6A-441E-A47C-57CE90C7F8B0} with the Router Manager for the IPV6 protocol. The following error occurred: Cannot complete this function.
Information 8/31/2011 11:30:21 AM Service Control Manager 7036 None The Routing and Remote Access service entered the stopped state.
Information 8/31/2011 11:30:20 AM Service Control Manager 7036 None The Application Layer Gateway Service service entered the stopped state.
Information 8/31/2011 11:30:01 AM Microsoft-Windows-Eventlog 104 Log clear The System log file was cleared.
============================================================================
============================================================================

Hi, I'm in the exact same situation and for once google is of no help. I have tried to get a simple connect through to my server (by using "telnet vpn.myserver.com 443") but it will only timeout. After deactivating the Windows firewall on the VPN box (which
is a virtual machine on a Hyper-V R2 SP1) I can locally telnet the VPN box and even get the special url (https://vpn.myserver.com/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/) to work. But this only works on the VPN box itself, no other server or client is
able to contact it. I have tried to connect from another server sitting next to the vpn box and in the same subnet (public IPs) but couldn't connect either. PPTP and L2TP connections are working but not SSTP. Another approach was to manually bind the http.sys
to specific IPs. No change. I'm fresh out of ideas. Anyone? regards, ck

Windows Server 2008 R2 clients can't double click to open Office files

Let me start by saying I don't know too much about Server 2008.
I have Server set up so desktop clients (Windows 7 Pro 64-bit) can log in as their user on their own machines. On two of the client machines (mine and my bosses, I have admin rights on everything) a couple funny things are happening:
1. Can't open a Word or Excel file by double clicking the icon on the desktop. Error is as follows:
Excel
Microsoft Excel cannot access the file 'C:\Users\(username)\AppData\Roaming\Microsoft\Excel\XLSTART\PERSONAL.XLSB'. There are several possible reasons: The file name or path does not exist. The file is being used by another program.
The workbook you are trying to save has the same name as a currently open workbook.
Word
The file Normal.dotm cannot be opened because there are problems with the contents.
and then
Word cannot open this document template. (C:\Users\(username)\...\AVWiz14s.dotm)
and then
Word cannot open the existing file. (Normal)
and then Word stops responding.
Note that I can open these documents normally from the start menu. I have determined this error has something to do with the server because I have tried a bunch of stuff on the internet, including an Excel hotfix, which did nothing.
2. Desktop icons flicker, rearrange themselves, and even disappear completely at times. I do not know what causes this, but I do believe this is a server issue.
3. I get recycle bin errors every time I log in, and every time I try to delete anything:
The Recycle Bin on \\intecserver\Office Employee Files\kneureuter\My Documents\My Videos is corrupted. Do you want to empty the Recycle Bin for this drive?
Sometimes I get that error for 3-4 different directories.
What I've tried:
I tried reinstalling Office, and that made no difference.
I have the drive from the server "Office Employee Files" mapped to network drive Y:. I can open that and go to my account folder on there, navigate to "Desktop" and open the files from there, but not on the physical desktop on my
computer.
These files aren't shortcuts on the desktop, their permanent home is on the desktop.
Just to reiterate, if I moved these files into a folder on the desktop, they will open fine. If I open them from within Excel or Word, they open fine. If I open them from the server drive mapped onto my terminal, they open fine. Just can't
open them by double-clicking the file if it is directly on the desktop. Any ideas?
I logged onto my account from a different computer and double-clicking to open the files worked fine on that computer. Both computers running Windows 7 Pro 64-bit and Office 2010 Pro. So that limits it to this machine and my bosses machine.
Since you can't create a shortcut for something on the desktop, I created a new folder on the desktop and put the files in that folder. From there I created a shortcut and put that on the desktop. That worked!
However, that's just a band-aid. I need to fix this problem sooner than later.
Anyone have any ideas? Thanks!

Hi AxEheaD15,
If the Desktop or the My Documents folder is redirected to a network location, Office applications may exhibit the similar issues .
For details please refer to following link:
http://support.microsoft.com/kb/2816253/en-us
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Server 2008 R2 DNS Entry Auto remove not working

Dear All,
I have configured DNS Ageing for 30 days removal of unwanted host entry.but it will not work.
Active directory DNS having all unwanted host in forward lookup zone and as well as reverse lookup zone.
how to solve this ?
pls help
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

Hi,
This is a rather common problem when configuring Scavenging and Aging of stale DNS entries. This has to be set in two spots, not just one as so many admins have difficulties with. It isn't very obvious.
Aging and Scavenging must be set on both the DNS Server and on the Zone
that you want to clean. In addition, DNS needs to be Active Directory integrated and resource records need to be dynamically registered. Static entries are ignorned.
First step:
To set aging and scavenging properties for the DNS Zones using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Set Aging/Scavenging for all zones.
Select the Scavenge stale resource records check box.
Modify other aging and scavenging properties as needed.
Second Step:
To set aging and scavenging properties for the DNS Server using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Properties.
Select the Advanced tab,and then enable Enable automatic scavenging of stale records
check box. Once done, specify the Scavenging period (That is recurring
interval for Scavenging on a DNS server) and click on OK
That will do it. Your DNS entries will then start auto scavenging based on the times you have determined. Word of caution - do not set your aging too aggressively - I have seen where an admin had set aging down to 1 day and when it finally kicked
off, nearly brought the company to a halt.

How Create Dos boot able USB for Create Ghost for NTFS File and windows server 2008

Hi
How Create Dos boot able USB.
Which show all Partition Drive in dos mode for NTFS file system.
I have Windows Server 2008 which have NTFS File System of Hard disk.
I have not CD / DVD Rome and I cannot attach the CD / DVD because we have no permeation by our organization.
but i wanted to create Ghost.
So i need boot pc by other media USB.
Please help me.

Hi
I just assembled a cd which boots dos and can read and write to ntfs drives.
Should you be interested in the iso image file which you can use to write to cd or usb please email me at [email protected]
Thanks
Nuno

Installation & setting OBIEE 10.1.3.4.1 on Windows Server 2008 r2

Hi Gurus,
I am able to install the OBIEE software help of below thread.
OBIEE - Windows Server 2008
Then i face issues like not able to connect to ODBC and other then i googled i found the below link.
http://oraclebiblog.blogspot.com/2009/06/installing-obiee-on-64-bit-windows-os.html
I followed the steps given in this blog except set 2. a.) and b.) as i cant find the folders on the server.
The problem is Once i log in I am able to view the first report on my welcome page but i cant travers from one tab to another nor to different Dashboard. when i Click on the Edit dashboard i am able to. i am able to create go to answers But i cant go to the different dashboard pages. I have go to link on some of the dashboard pages with that help i can travers from one dashboard page to another. One more thing i noticed that Charts are not displaying and Conditional formating also not displaying. I dont no why something is working something not.
Please help me its very urgent and kind a risk of my J.
Regards
Ali
Edited by: @l**** on Apr 21, 2011 2:17 PM

Change the ODBC driver with OCI driver in the connection pool. Download and install oracle instant client if you don't have any Oracle fat client on the machine where is OBIEE.
Good tutorial to install oracle instant client:
http://www.dbatoolz.com/t/installing-oracle-instantclient-basic-and-instantclient-sqlplus-on-win32.html
don't forget to restart all OBIEE services...
Regards,
E.

Windows Server 2008 R2 activation via KMS failure

Hello,
I'm trying to activate about 20 Windows Server 2008 R2 via KMS. Before that I have successfully activated Windows 7 clients and Microsoft Office 2010 products. But when I try to activate Windows Server 2008 R2 clients via kms I'm getting the following error
on the KMS host:
. Exception System.Runtime.InteropServices.COMException (0xC004F074)
KMS host installed on the machine with Windows 7 Professional OS. From the VAMT GUI I can see the following Windows server license information :
Key Type : CSVLK
Edition : ServerStandard;ServerEnterprise;ServerWeb;ServerHPC
Description : Server 2008 R2 Std and Ent Volume.
If I try to activate product from the client I get the following error :
Error: 0xC004F074 The Software Licensing Service reported that the computer could not be activated. The Key Management Service(KMS) is unavailable.
I have searched a lot about this error. But still cannot solve the issue.
Thanks & Regards
Ulzii

Yes KMS host is Windows 7. I read all documents about KMS but haven't read this doc. So I have to change KMS host or add Win Server KMS host, that's right?
Yes that's right. Windows "Client" OS editions, when setup as KMShost, cannot issue activations for Windows "Server" OS editions.
To do so, you will need a KMShost product key for Windows Server - you will only have such a product key if you have purchased Windows Server licenses through Volume Licensing.
(The Windows 7 KMShost product key cannot be installed on Windows Server OS)
http://social.technet.microsoft.com/wiki/contents/articles/22510.volume-activation-kms-mak-adba-avma.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Windows Server 2008 CVE-2014-8730 vulnerability

We've received our monthly vulnerability scan results on our production servers running Windows Server 2008 R2.
They are showing vulnerability to TSL POODLE, which is the subject of CVE-2014-8730.
In this article on Qualys, there is mention that Windows Server 2008 is vulnerable but Microsoft have not taken any action yet:
https://community.qualys.com/blogs/securitylabs/2014/12/08/poodle-bites-tls
Microsoft - We've seen reports that some older platforms (e.g., Windows 2008) appear vulnerable, but no apparent patterns or reliable information so far.
Is there any update on this issue as it's an exploitable vulnerability we would like to remediate.
Thanks,
Lyndon.

Hi Vivian,
The article cited is about a different issue.
In October 2014 there was an SSL v3 POODLE vulnerability, we have resolved this issue by disabling SSL v3 (as recommended).
The article your posted specifically references that issue (the article was published in October 2014).
In December 2014 there was another POODLE vulnerability announced that affected the TLS protocol.
A lot of major vendors have published patches for this issue, but Microsoft are yet do do so (as far as I know).
Hence by original question that has not been answered yet.
Regards,
Lyndon.

Hard drive not recognized during windows server 2008 setup

hard drive not recognized during windows server 2008 setup

Hi,
Whether the hard disk is recognized in BIOS?
Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
a suitable driver is installed.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Download issue when Windows 7 Pro joins a Windows Server 2008 Active Directory

Hi,
I purchased 2 new Dell OptiPlex 3010 desktop computers that came with Windows 7 Professional operating system with SP1.
There were no Microsoft updates installed yet. After I added one of these Dell computers to the Windows Server 2008 Active Directory, I was not able to download several items.
Below are several examples:
1) I downloaded the Norton anti-virus installation file. This file is not the full installation of Norton; it is more of a file where you execute it and it will download the full installation from the Internet like from their Norton web
site. So when I executed this installation file, it does not download the full installation files.
It just hung at the screen saying “Downloading” and it will finally stop with an error (don’t remember the error message).
Note: If I have the full Norton installation file then I am able to install it on this computer with no problems.
2) I downloaded the Adobe Reader installation file. This file is not the full installation of Adobe Reader; it is more of a file where you execute it and it will download the full installation from the Internet like from their Adobe web
site. So when I executed this installation file, it hung at the downloading part and then it will error out with a “Actionlist Not Found” message.
Note: If I have the full Adobe Reader installation file then I am able to install it on this computer with no problems.
3) I installed Microsoft Office 2010 Standard version on this computer.
I configured Microsoft Outlook to retrieve emails from my email provider (pop and smtp settings).
After configuring Microsoft Outlook, I was able to send emails through Microsoft Outlook successfully (and very quickly), but he was unable to retrieve my emails. The progress bar for the Receiving in the "Outlook Send/Receive Progress" box
shows no progress. The Progress bar is not moving. There is a message at the bottom of Microsoft Outlook stating "Receiving message 1 of 6 (x.xx KB of x.xx MB)" and it is very slow. My new emails were not being retrieved at all.
I tried various pop and smtp servers that was available for my email provider, but all had the same effect.
4) I can access certain web sites (e.g.
www.yahoo.com, www.cnn.com) while I cannot access other web sites like
www.usatoday.com, my web hosting email site.
Note: I had a Dell computer with Windows XP Professional operating system and this computer does not have any of the above issues.
The above are only a few examples that I have experienced.
If I removed this Dell OptiPlex 3010 computer from the Windows Server 2008 Active Directory then I still experience the same issue.
So as another test, I setup the other new Dell OptiPlex 3010 with the same Windows 7 Professional OS with SP1.
This time, I did not join the Windows Server 2008 Active Directory and I was able to successfully download the full Norton installation files, download the full Adobe Reader installation files, download my emails from Microsoft Outlook 2010, etc.
But once I joined this computer to the Windows Server 2008 Active Directory then I am not able to download these files and emails at all.
It seems like there might be some group policy or a security setting that is preventing these downloads so I disabled the group policy on the Windows Server 2008 AD and Windows 7 Profession OS, but it didn’t resolve the issue.
I disabled all of the firewall programs on this Windows 7 Professional OS, but it still did not resolve the issue.
Since the Windows Server 2008 AD did not have DHCP installed, I installed DHCP and setup a scope.
Then configured the Windows 7 Professional OS to obtain an IP address, but it didn’t resolve the issue.
If I move this Windows 7 Professional computer to another network where it did not have any Active Directory; it just had a wireless router serving DHCP then everything works on the Windows 7 Pro computer.
Any ideas what is the root cause when a Windows 7 Professional computer join a Windows Server 2008 AD?
Thanks,
wl_tech

Hi,
Could you please tell some information for the AD environment and how it connect to the internet?
Regarding 3rd party installlers didn't work as expected, please also seek help in their offical website.
For outlook not receiving emails, could you please take a look in
Event Viewer and see if there are any special errors logged there?
And when trying to access the website like
www.usatoday.com, any special errors IE showed out?
Best regards
Michael Shao
TechNet Community Support

Problems installing Crystal Reports 2008 Server on Windows Server 2008 serv

I attempted to install the Crystal Reports 2008 product on one of our Windows Server 2008 servers.
After installing disk 1
Crystal Reports 2008 Server attempts to open up in IE...... but opens up to a blank page
http://bmlfileserver:8080/CmcApp/
anyone have any idea why? why does it not prompt for the second CD?
Is this a compatibility with Windows Server 2008?

I'm attempting to install CRS 2008 on Windows Server 2008 as well, and I'm running into a few issues. Did you ever get yours resolved? I started by trying to use IIS, but I'm uninstalling it completely now and will try Tomcat instead. Which route did you go?

Support for JDeveloper 10.1.3 on Windows Server 2008 64 bit OS

Hello,
We are using JDeveloper 10.1.3.3.0 (patch # 9879989) for R12.
Would like to know support for Jdeveloper on windows server 2008 - 64 bit.
Thanks,
Swati.

Hi Swati,
Currently I am using Jdeveloper Patch#9172975 for R12.1.2 on windows server 2008 X64 and it works fine.
As Jdeveloper Patch#9172975 is lower version then Jdeveloper Patch#9879989, Patch#9879989 should work on Windows Server 2008 64bit.
Still I am not confirm about Jdeveloper Patch#9879989 on Windows Server 2008 64bit.
Thanks,
Laukik

"Network Error - 53" while trying to mount NFS share in Windows Server 2008 client

CentOS | Windows 2008
I've got a CentOS 5.5 server running nfsd. On the Windows side, I'm running Windows Server 2008 R2 Enterprise. I have the "Files Services" server role enabled and both Client for NFS and Server for NFS are on.
I'm able to successfully connect/mount to the CentOS NFS share from other linux systems but am experiencing errors connecting to it from Windows. When I try to connect, I get the following:
C:\Users\fooadmin>mount -o anon 10.10.10.10:/share/ z:
Network Error - 53
Type 'NET HELPMSG 53' for more information.
(IP and share name have been changed to protect the innocent :-) )
Additional information:
I've verified low-level network connectivity between the Windows client and the NFS server with telnet (to the NFS on TCP/2049) so I know the port is open. I've further confirmed that inbound and outbound firewall ports are present and enabled.
I came across a
Microsoft tech note that suggested changing the "Provider Order" so "NFS Network" is above other items like Microsoft Windows Network. I changed this and restarted the NFS client - no luck.
I've confirmed that the share folder on the NFS server is readable/writable by all (777)
I've tried other variations of the mount command like: mount 10.10.10.10:/share/ z: and
mount 10.10.10.10:/share z: and mount -o anon mtype=hard \\10.10.10.10:/share * No luck.
As per the command output, I tried typing NET HELPMSG 53 but that doesn't tell me much. Just "The network path was not found".
I'm lost on how to proceed with troubleshooting. Any ideas?

There are usully two aspect that come to mind:
1. Syntax of mount command
2. Mismatch of NFS versions
Third reason is here
http://blogs.technet.com/b/sfu/archive/2011/11/21/getting-network-error-53-network-path-not-found-quot.aspx
Rgds
Milos

Multi Question: Windows Server 2008 NFS client / NTFS/FAT32 Disk not seen..

Similar Messages

Maybe you are looking for