Multi-row menu item with highlight effect (JDEV - 100202.0230.5526)

I am using the PS2 JDEV ((JDEV - 100202.0230.5526). Is it possible to have a multi row display for a menu item (af:commandMenuItem) while preserving the highlight/roll over selection effect of a typical menu item in af:menu. I would like to display an image (which may not be possible to display as an icon attribute), a description and another field (such as count) below the description.
The menu will then be a list of such items. I would like to then have user select this as a menu item, when the user scrolls to any such item, keeping the rollover/highlight behavior.
Thanks a lot.

Thanks for the response. Is there an example/code snippet for this (using commandLink). Or any other mechanism possible to get similar behavior (if not using commandMenuItem) for highlight in case of multiple components (as a single row/item) ?
Thanks again.

Similar Messages

Multi Row Text Item (Not Text Area)

Is it possible to create a multi-row text item for entering data i.e. a text area WITHOUT a scrollbar?. I know exactly how many rows I need e.g. an address field
The scroll bar looks terrible on printouts when printing off data entry forms.
Also any way of having ruled lines appear in the multi row text field?
regards
Paul

Hello,
No, just use three text items. or a textarea with the style ="overflow:hidden;" should supress the scrollbar
Carl
Message was edited by:
Carl Backstrom

Multi-Row Update form with wrapped fields

Hi,
I have a multi-row update form with too many fields to fit on the screen without having to scroll. Is it possible to wrap the extra fields onto a 2nd line.
So each DB record will actually span 2 srceen rows and fit nicely into my browser ??
Thanks for any help,
Brandon

It is possible, but would require some serious work on the report template, to create a custom row template.
I started to do this at http://htmldb.oracle.com/pls/otn/f?p=24317:191 but realized that it is hard work. Also, where would you show the headings for the second part of the row (split onto the next line)?
Instead, I would use the Show/Hide columns technique (client-side scripting) to reduce the number of columns shown. Search for it on this forum. Carl and I have some good examples out there.

Lost most of the Apple Menu items with 10.8.5

I have only
About This Mac
Force Quit...
Sleep
Log Out (User)...
The Finder starts up as Simple Finder, I have to select Run Full FInder to get the full Finder back but it does not reactivate the Apple Menu items.
After restarting the computer the Finder again opens as Simple Finder.
Root has access to the normal Apple Menu items.
Please someone give me some advice
Thanks

Part of your problem, at least, is that you're in single-application mode.
Back up all data.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
defaults delete com.apple.dock single-app && killall Dock
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You should get a new line ending in a dollar sign ("$"). You can then quit Terminal. Test.

Multi Line Menu Item and Button

Dear oracle developers,
I am trying to set a multi line label for
a button.
The label should be displayed as
Client
Reports rather than Client Reports
on the screen.
I tried CHR(i) for all the 255 ascii numbers.
I get some special characters inbetween but never got a new line.
Can any one have some ideas about this. I would like to use the same feature for a menu item also.
Thank You.
Srini S. Sundar

Hi,
U can do this in the following way :
1. Create a Icon button in your Forms canvas.
2. create a icon file (.ico) by writing a multiline text.
3. Attach this .ico file to the icon button in your forms.
Hope this may help you.
sandip.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Srini Sundar:
Dear oracle developers,
I am trying to set a multi line label for
a button.
The label should be displayed as
Client
Reports rather than Client Reports
on the screen.
I tried CHR(i) for all the 255 ascii numbers.
I get some special characters inbetween but never got a new line.
Can any one have some ideas about this. I would like to use the same feature for a menu item also.
Thank You.
Srini S. Sundar<HR></BLOCKQUOTE>
null

When I select a menu item, the highlight is light blue and the item font color goes white. It is very difficult to read? Any solution?

When I select Bookmarks, the menu item (Bookmarks) is highlighted in light gray color; and the letters of the work itself (Bookmarks) turns white. This same thing happens when you go into individual bookmark selections. It is very difficult to read. Are there any alternatives that can be set by the user?

Are you using a standard Windows theme?
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Insert Menu Item with underscore

When I insert menu items that have underscores it underlines the previous letter rather than showing underscore. How do I fix this problem?

Are you trying to get a menu item to be selected by an Alt key combination? Placing an underscore "_", before any letter in the Item Name will cause an underscore to appear under the subsequent letter (not previous) and allow Alt + the underscored letter to active that menu item. For example, J_unk will appear as Junk with an underscore under u and ALT + u will activate the Junk menu.

I can't link menu items with the areas in the page:

I download a theme over imternet and menu and the page areas not linked how can i do that ?
When i press the communication button i stays constant
but there is communication section and i can't linked them.

You cannot link default menu items , default menu includes the link to pages ( site structure).
You would need to create a manual menu if you want to link new pages to menu items. Please let me know if you are not looking for this answer.
Thanks,
Sanjit

Missing New Document Window when opening new document, along with other menu items: Object style, effects panel, etc.

I am missing many elements, it seems in my InDesign program. How can this be? I am taking a course at the local college (inDesign CS6), and when going through the book and steps, I keep noticing that I am missing things. For example: When I open a New Document - no new document window shows up on my screen, and there is no way to change the page size, etc that shows up. 2.) There is no Object Styles panel - Window>Styles>Object Styles - but the Object Styles option doesn't exist. 3.) There is no Effects panel to be found, either. As I continue the course, more and more things keep showing up like this. What is going on? I am not doing something wrong; my instructor verified that indeed these things seem to be missing. I purchased the Adobe Creative Suite 6 Design & Web Premium disk for Windows OS. Please help!
I did have trouble installing the disk, but thanks to someone in the forum, I was able to drag everything to the desktop and it installed that way. Could that be why this is happening?

The Knowledge Base plugin is not required, but the Master Page is, so there's definitely an install problem. Go back to Help, and hold down the Ctrl key while you click on About InDesign. What is the full version number in the upper left of the dialog that appears?
Also, go to Adobe - Exchange : Download the Adobe Extension Manager and download and install the latest version of the CS6 extension manager.

How do I "round trip" a multi track Audition project with After Effects?

I'm a complete Audition newb and haven't been able to find an answer for this yet. I would like to make an ajustment in my Audition project and then move over to After Effects to hear it paired with the video. Also my voice over track is not in the mix even though it has signal and when I click into the individual cuts I hear it just fine. The voice over is track 2.

I'd need to see a little bit more of the Track Panel for Track 2 to know for sure why it's not included in a mixdown, but the likely cause is the Track Output is not set to Master, but instead was set to a specific output channel on your device.
As for the round-tripping between Au and AE, this process does not appear to be as elegant in After Effects as it is in Premiere Pro. You'll need to export the mixdown of your multitrack session, overwriting the file After Effects is referencing, the re-link it in AE. This would be how I'd approach it:
1. From Audition multitrack, File > Export > Multitrack Mixdown > Entire Session. Create a file in your AE project folder called Audition Mixdown.wav (for example. Best to use uncompressed WAV or AIFF formats at this stage.)
2. Drop this file into your Composition.
3. Make changes to the mix in Audition and either overwrite the original file, or save a new version.
4. In After Effects, right-click the file in your Project panel and choose Replace Footage > File... selecting the updated file.
Since it appears AE loads assets fully into RAM, it doesn't monitor the file on disk for changes and so it doesn't auto-update the asset when it is overwritten by Audition. In Premiere Pro, where the assets are streamed directly from disk, changes saved to the source asset update in the Premiere timeline almost immediately. Perhaps this is a potential workflow optimization we can discuss with the After Effects team to improve this workflow.

How to write multi row sub query with the row containing range of values?

Hi all,
I have to include a column which contains weight ranges and it should come fom table called "report_range_parameters"
The following query will reutrn those weight ranges.
select report_parameter_min_value || ' -> ' || report_parameter_max_value
          from report_range_parameters
         WHERE report_range_parameters.report_parameter_id = 2359
           and report_range_parameters.report_parameter_group = 'GVW_GROUP'
           and report_range_parameters.report_parameter_name = 'GVW_NAME'
                    The below query should return the values group by those weight ranges.
How could I write that sub query?
select   SUM(NVL("Class 0", 0)) "Class 0" ,
            SUM(NVL("Class 1", 0)) "Class 1" ,
            SUM(NVL("Class 2", 0)) "Class 2" ,
            SUM(NVL(" ", 0)) "Total"
     FROM (
             SELECT report_data.bin_start_date_time start_date_time,
                    SUM(DECODE(report_data.gvw, 0, report_data.gvw_count, 0)) "Class 0" ,
                    SUM(DECODE(report_data.gvw, 1, report_data.gvw_count, 0)) "Class 1" ,
                    SUM(DECODE(report_data.gvw, 2, report_data.gvw_count, 0)) "Class 2" ,
                    SUM(NVL(report_data.gvw_count, 0)) " "
              FROM report_data
             GROUP BY report_data.bin_start_date_time
          ) results
   RIGHT OUTER JOIN tmp_bin_periods
                 ON results.start_date_time >= tmp_bin_periods.bin_start_date_time
                AND results.start_date_time < tmp_bin_periods.bin_end_date_time
           GROUP BY tmp_bin_periods.bin_start_date_time,
                    tmp_bin_periods.bin_end_date_time Thanks.
Edited by: user10641405 on Jun 15, 2009 3:14 PM
Edited by: user10641405 on Jun 15, 2009 3:17 PM

Hi,
Assuming the following 4 things:
(1) report_range_parameters contains data like this, from your [previous thread|http://forums.oracle.com/forums/message.jspa?messageID=3541079#3541079]
id group      name         min_value      max_value
1   gvw_group gvw_name      0              5
2   gvw_group gvw_name      5              10
3   gvw_group gvw_name     10              15(2) max_value is actually outside the range (that is, a value of exactly 5.000 is counted in the '5->10' range, not the '0->5' range)
(3) the range has to match some column x that is in one of the tables in your main query
(4) You want to add that column x to the GROUP BY clause
then you shopuld do somehting like this:
select   SUM(NVL("Class 0", 0)) "Class 0" ,
            SUM(NVL("Class 1", 0)) "Class 1" ,
            SUM(NVL("Class 2", 0)) "Class 2" ,
            SUM(NVL(" ", 0)) "Total"
,         report_parameter_min_value || ' -> ' || report_parameter_max_value     AS weight_range          -- New
     FROM (
             SELECT report_data.bin_start_date_time start_date_time,
                    SUM(DECODE(report_data.gvw, 0, report_data.gvw_count, 0)) "Class 0" ,
                    SUM(DECODE(report_data.gvw, 1, report_data.gvw_count, 0)) "Class 1" ,
                    SUM(DECODE(report_data.gvw, 2, report_data.gvw_count, 0)) "Class 2" ,
                    SUM(NVL(report_data.gvw_count, 0)) " "
              FROM report_data
             GROUP BY report_data.bin_start_date_time
          ) results
   RIGHT OUTER JOIN tmp_bin_periods
                 ON results.start_date_time >= tmp_bin_periods.bin_start_date_time
                AND results.start_date_time < tmp_bin_periods.bin_end_date_time
   LEFT OUTER JOIN report_range_parameters                                        -- New
                ON x >= report_parameter_min_value                                    -- New
          AND x < report_parameter_max_value                                   -- New
                AND report_range_parameters.report_parameter_id = 2359                         -- New
                and report_range_parameters.report_parameter_group = 'GVW_GROUP'               -- New
                and report_range_parameters.report_parameter_name = 'GVW_NAME'                    -- New
           GROUP BY tmp_bin_periods.bin_start_date_time,
                    tmp_bin_periods.bin_end_date_time
              , x                                                       -- New

Currency translation differences with an effect on earnings

Product Version: SAP R/3 46.C
Componente: EC-CS-CSF-E Currency Translation
In currency translation program of ECCS (tx CX40) the prior year portion of translation differences that affects earnings is posted in current period in the earnings retain item (ER) which according to SAP documentation "Currency translation differences with subsequent consolidations" is correct, however when we run the currency translation on subsequents periods this amount is posted again generating a multiplying of differences on each period.
In accordance with section u201CBu201D of SAP note 553586, the carryforward item (retain earnings) was assigned to translation key 5, to avoid multiplications of this difference in every execution of currency translation for current period. This correction was applied successfully, however the problem is now generated when we run the currency translation in every subsequent period.
SAP notes 582815 and 553586 was applied succesfully.
We also verified SAP note 1045402 changing the translation key 5 to 1, for balance carryforward item (retained earnings) this avoids the difference effect on subsequents periods, but generates a translation differential effect undesired on this item, since this is a historical item that not must be altered by currency translation.
Additionally we read SAP note 509509 and we think that this issue corresponds whit symptom 2 of that note.
Step by Step:
Transaction: CX40
Setting of Translation SET in translation method:
1.- MARS-GAP-Monetary:
1.1.- Items of balance sheet
1.2.- Translation Key 1
1.3.- Item for differences: income statement item with an effect on earnings
2.- MARS-GAP-NonMonetary
2.1.- Items of balance sheet
2.2.- Translation Key 6
2.3.- Item for differences: income statement item with an effect on earnings
3.-MARS-MOR-Monetary
3.1.- Items of P&L
3.2.- Translation Key 5
3.3.- Item for differences: income statement item without an effect on earnings
4.-MARS-MOR-NonMonetary
4.1.- Items of P&L
4.2.- Translation Key 6
4.3.- Item for differences: income statement item without an effect on earnings
5.- MARS-HIST
5.1.- Items of balance sheet
5.2.- Translation Key 6
5.3.- Item for differences: Balance sheet item without an effect on earnings
6.- ANI-BS-FX
6.1.- Items of differences SET MARS-HIST and Carryforward Item for special items in transaction CXD3, the same item for the balance carryforward (retained earnings)
6.2.- Translation Key 5
6.3.- Item for differences: Balance sheet item without an effect on earnings (the same item for the SET MARS-HIST)
7.- ANI-BS
7.1.- The special balance sheet item in Transaction CXD3
7.2.- Translation Key 5
7.3.- Item for differences, the same item
8.- ANI-IS
8.1.- The special income statement item in Transaction CXD3
8.2.- Translation Key 5
8.3.- Item for differences, The same item
Note:
1 .- According to the point A of the note 553586 was included the FS Item 484051011(difference item for SET MARS-HIST) in the conversion SET ANI-BS-FX
2 .- According to Section B of the note 553586 was included the account for carried forward 481000001 the special accounts set up in the transaction CXD3 in the conversion SET ANI-BS-FX
3 .- According to Section C of note 553586 are included special accounts set up in the transaction CXD3 390000 and 251200, in the conversion SET ANI-IS and ANI-BS respectively.
When run the currency translation in the new year 1-2011, the prior year portion of translation differences that affects earnings is posted in current period a credit to earnings retain and debit to account difference in SET for this account. This amount is same on special balance sheet item 251200, in tx CXD3, also found on the statistical FS item.
Then in subsequent periods, 2 - 2011 it posting another credit to earnings retain and debit to account difference in SET for this account, generating a multiplying of differences on each period, even though the difference for this account (ER) in the log of the translation currency is equal to the difference posted to the previous period, show this in transaction CX34 for items of translation (1) for this account until 1-2011.
Edited by: Ana Brito on Jul 25, 2010 8:10 PM

Hi,
just a information how I did a workaround about this:
The opening (movement type 100) of the balance sheet item "differences of currency translation" is customized with "don't change...".
Every increase to "differences of currency translation" works with e.g. movement type 120 and will be carried forward to 100.
Maybe this is a scenario you can use...
BR

Alt+mnemonic key is not working properly for Menu Items

Assume there are two menus , File Menu with mnemonic Alt+F
and Save Menu with mnemonic Alt+S. File Menu contains the
menu items like PageSetup with Mnemonic S. Save menu has
the menu item Properties with Mnemonic P.
Pressing Alt+F opens the File Menu which has the menu item
PageSetup.Pressing S activates the PageSetup menu item.
Similarly Pressing Alt+S opens the Save Menu which has the
menu item Properties. Pressing P activates the Properties
menu item acion. But Pressing Alt+P also activates the
Properties menu item action(it is not the desired behaviour)
Pressing Alt+Mnemonic key has to open only the Menus.It
should not consider the menu items.
STEPS TO FOLLOW TO REPRODUCE THE PROBLEM :
1.Press Alt+F
2.File Menu is invoked
3.Press S
4. Invokes the menu item action
5. Press Alt+S
6. Save menu is invoked
7. Press P
8. Invokes the menu item action
9. Press Alt+P
10. Invokes the menu item action
EXPECTED VERSUS ACTUAL BEHAVIOR :
Pressing of Alt+Mnemonic key invokes the menu and also menu
item actions. If the same mnemonic is present in the Menu
it is giving the priority to Menu only.Pressing of Alt key
alone does not hiding the pull down menu
Expected Result;
Pressing of Alt+Mnemonic key has to list out the pull
down menu only.It should not consider the menu items with
the same mnemonic. If Alt key alone is pressed the pull
down menu has to hide.
REPRODUCIBILITY :
This bug can be reproduced always.
---------- BEGIN SOURCE ----------
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class JavaBug extends JFrame
public JavaBug()
// Create menu bar
JMenuBar menuBar = new JMenuBar(); // Create menu bar
setJMenuBar(menuBar); // Add menu bar to window
// Create first option on menuBar
JMenu m1 = new JMenu("File");
m1.setMnemonic('F');
JMenuItem m1o1 = new JMenuItem("PageSetup");
m1o1.setMnemonic('S');
m1o1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
System.out.println("File/PageSetup was selected");
m1.add(m1o1);
// Create second option on menuBar
JMenu m2 = new JMenu("Save");
m2.setMnemonic('S');
JMenuItem m2o1 = new JMenuItem("Properties");
m2o1.setMnemonic('P');
m2o1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
System.out.println("Save/Properties was selected");
m2.add(m2o1);
menuBar.add(m1);
menuBar.add(m2);
this.setTitle("Mnemonic Bugs");
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
setSize(400,250);
show();
public static void main(String[] args)
JavaBug bug = new JavaBug();
Suggestions welcomed
punniya

I tried your code, but didn't get your "bug" using jdk 1.3 on windows 2000 (at my school).
Kind regards,
Levi

Problem when trying to add a link to the left menu item!!!!

Hi everyone,
I am trying to put a new menu group on the left menu,with a link in that group for every one.On checking with the customization guide this is what i did
for one link i did add the following lines in each of the files
1)xlWebAdmin.properties
- menuGroup.Misc-Menu=Misc Menu
- menuItem.Misc-Menu.My-Nomination=My Nomination
2) xlDefaultAdmin.properties
- menuItem.Misc-Menu.My-Nomination.link=mynomineefrm?showfrm
3) repacked the war and the ear
4) Restarted my server
When I login into the administration(xelsysadm) page I didnt see any menu item with name "My Nomination" which i am supposed to see.
secondly it shows the menu item when ever i select some group and click on assign menu item.
Moreover, when I try to assign this menu item to all users group it gives me this error
On browser it prints
Permission Denied to Assign Selected Menu Items
You do not have the permissions to assign one or more selected menu items.
on console it prints
ERROR [SERVER] Class/Method: tcDataObj/eventPreInsert Error :Insert
permission is denied
ERROR [APIS] Class/Method: tcGroupOperationsBean/addMenuItems encou
nter some problems: maoRejections:You do not have permission to insert this obje
ct.
ERROR [APIS] Class/Method: tcGroupOperationsBean/addMenuItems encou
nter some problems: Error occurred while adding menu items.
ERROR [WEBAPP] Class/Method: UserGroupMenuItemsAction/commitGroupAs
signMenuItems encounter some problems: {1}
Thor.API.Exceptions.tcBulkException
This problem eat my happy sunday :-(, any one has solution for this problem?
- Also if some one can help on how to link jsp to the new link will be helpful for me!
Thanks,
doki

Design Console > Form Information > add new
Class Name Organizations.Merge
Description Move users from one organization to another
Type menuitem
Add following to xlWebAdmin.properties, xlWebAdmin_en_US.properties
Organizations.Merge=mergeOrgs.do?Display
menuItem.Organizations.Merge.link=mergeOrgs.do?MergeOrganizations
menuItem.Organizations.Merge=Merge
mergeOrgs.button.display=Merge Organizations
Even you have to assign first to System Administrator group
First go to Manage Group
Select System Administrator Group
Select Menu Item
Click Assign and select newly craeted Menu Item and click Confirm
These are the steps to see the new menu item. To make this menu item working:
you'll have to write action class, form bean class and you'll have to create JSPs and make their entry in struts-config as welll as in Tiles-def.xml
Then your menu item will work.

How to change the default position of context menu item? (C#)

Hi,
I have included a calendar context menu item with my Outlook Addin. But by default, its positioned at the last as shown in the picture below:
I need a way to make it as the fourth item instead of last one. Also, I want set an icon for the same. How can I do that?
Appreciate if you can give some sample examples.
Thanks in advance.
Thanks Prasad

Hello Prasad,
The
Customizing Context Menus in Office 2010 article in MSDN describes the basics.
You can specify the IdMso value of the built-in control after/before you need to insert your own:
<button id="MyBtn" label="MyButton" insertBeforeMso="OpenSelectedItems" />
See
Office 2013 Help Files: Office Fluent User Interface Control Identifiers
for IdMso values.

Multi-row menu item with highlight effect (JDEV - 100202.0230.5526)

Similar Messages

Maybe you are looking for