Multi-row sub query returns ORA-00904 :invalid identifier error
I am creating a report from two tables that I am not joining. I want a single line for every row in table1 that meets a date range. Table2 can contain none or many rows for each recored in table1. I want to get up to two fields from table2.
I was using a case statement to check if there was data and then an in-line query or subquery. Once again, the idea is to have a single line on the report for each table1 record.
I get this error with the code below. It seems the nested multi-row subquery can not see the a.cr_mas_cr_no identifier.
ORA-00904: "a"."cr_mas_cr_no": invalid identifier
Any help is greatly appreciated,
Sam
select
a.cr_mas_cr_no "CRNO", a.cr_mas_type "TYPE", a.cr_mas_status "CR Status",
a.cr_mas_date_logged "Logged date", a.CR_REL_REQ_APP_DATE "RTP approved",a.CR_REL_REQ_RTP_DATE "RTP Date",
a.cr_accepted_date "Complete", a.cr_mas_submitted_by "Requester",
select doc_user FROM crrm_cr_documents WHERE doc_cr_number =a.cr_mas_cr_no and rownum = 1 and DOC_TYPE = 'BD' ) "Bus Design",
(select doc_user FROM crrm_cr_documents WHERE doc_cr_number = a.cr_mas_cr_no and rownum = 1 and DOC_TYPE = 'TD' ) "Tech Design",
(select doc_user FROM crrm_cr_documents WHERE doc_cr_number = a.cr_mas_cr_no and rownum = 1 and DOC_TYPE = 'TE' ) "User acceptance test",
case
when (select count(appr_user) from crrm_cr_approvals where appr_cr_no = a.cr_mas_cr_no and appr_type = 'RTP') > 0
then (select appr_user from (select * from crrm_cr_approvals where appr_cr_no = a.cr_mas_cr_no and appr_type = 'RTP') where rownum = 1)
end
"RTP #1",
case
when (select count(appr_user) from crrm_cr_approvals where appr_cr_no = a.cr_mas_cr_no and appr_type = 'RTP') > 1
then (select appr_user from (select * from crrm_cr_approvals where appr_cr_no = a.cr_mas_cr_no and appr_type = 'RTP') where rownum = 2)
end
"RTP #2",
a.CR_REL_REQ_RTP_BY "Released by",
a.CR_ACCEPTED_BY "Post RTP User Acceptance",
a.cr_mas_title "Title", a.cr_mas_id "ID"
from
crrm_crmaster a
where
(a.CR_REL_REQ_RTP_DATE >= :P1109_BEGDATE and (a.CR_REL_REQ_RTP_DATE <= :P1109_ENDDATE) and
(a.cr_mas_status = 'Complete' or (a.cr_mas_status = 'Release Approved'and a.CR_REL_REQ_APP_DATE < :P1109_ENDDATE))
Message was edited by:
slavanaway
Iceman,
Thanks for the reply I will try your suggestion.
I will try and explain why I think two subqueries (an in-line query with a subquery?) are required. I will use the creation of the column RTP #1 as the example as the RTP #2 column is only different in the rownum selected.
Looking only at the lines that fail, here is my analysis. (If I rem out the two case lines the query runs, I just don't get two columns of data I need.) I will only examine the first case as the second is changed to extract the second approval via the rownum = 2 criteria. The first statement checks there is at least one RTP approval stored for the request and then gets the user who approved the request if the test is true.
case when
(select count(appr_user) from crrm_cr_approvals where appr_cr_no =a.cr_mas_cr_no and appr_type = 'RTP') > 0
then
The above part works fine and the correct count of approvals is returned.
(select appr_user from (select * from crrm_cr_approvals where appr_cr_no=a.cr_mas_cr_no and appr_type = 'RTP') where rownum = 1)
end
"RTP #1",
I moved the parenthesis to the correct location. There can be multiple approvals for a given parent record. Some parent records need one, some need two approvals. If I replace
(select appr_user from (select * from crrm_cr_approvals where appr_cr_no =a.cr_mas_cr_no and appr_type = 'RTP') where rownum = 1)
with
(select appr_user from approvals where appr_cr_no =a.cr_mas_cr_no and appr_type = 'RTP' and rownum = 1)
The correct result is returned because it returns exactly one row as rownum=1 limits the query. When rownum = 2 then the query returns null as the rownum never gets to two as the rownum column is built via the set created by the second subquery.
The subquery builds a set of approvals for a specific "cr_no" and appr_type of "RTP". the outer query then looks at the rownum of the second query
Here is where I got the rownum information from;
http://www.oracle.com/technology/oramag/oracle/06-sep/o56asktom.html
So here is what I think is happening;
1. Main query From and Where are processed. This should provide the "set" for the query
2.The from subqueries for RTP #1 and RTP #2 should be able to access the a.cr_mas_cr_no field and build a set from the approvals table.
3.The RTP #1/2 subquery (inline maybe a better description?) would then get the correct row from the from subquery.
The error "invalid identifier" refers to the a.cr_mas_cr_no field. I assume it means it can not resolve the table alias inside the subquery.
So maybe your grouping would help, I will try.
Sam
Similar Messages
-
Why do I get a "DATE1 : ORA-00904 Invalid identifier" error ?
Hi,
Despite my efforts, I can't see why I get a "DATE1 : ORA-00904 Invalid identifier' error whith this request.
{code}With S1 as (
SELECT TRUNC(DATE1, 'MM'),
ROUND(SUM(VALEUR), 2)
FROM EVV_E036
GROUP BY TRUNC(DATE1, 'MM')
ORDER BY TRUNC(DATE1, 'MM'))
SELECT n,
NVL(ROUND(SUM(Valeur),2), 0)
FROM (select add_months(to_date('01/01/2006', 'dd/mm/yyyy'), level - 1) n FROM dual connect by level <= 12) months
LEFT JOIN S1
ON months.n = TRUNC(DATE1, 'MM')
GROUP BY n
ORDER BY n{code}
The line in error is this one : {code}ON months.n = TRUNC(DATE1, 'MM'){code}
Any idea much appreciated !
Regards,
Christianhi,
I have done this and get no more errors. Now I see that the values I get are equal to 0. Or, I do get values different from 0 in my table ! I can't see why the left join gives 0. I have to dig this and come back tomorrow.
With S1 as (
SELECT TRUNC(DATE1, 'MM') Date1,
ROUND(SUM(VALEUR), 2) Debit
FROM EVV_E036
WHERE CLEF_VAR = (SELECT CLEF_VAR FROM SITE_ECHELLE WHERE SITE = 'E036')
AND DATE1 BETWEEN TO_DATE ('01/01/2007000000', 'DD/MM/YYYYHH24MISS') AND TO_DATE ('31/12/2007235959', 'DD/MM/YYYYHH24MISS')
GROUP BY TRUNC(DATE1, 'MM')
ORDER BY TRUNC(DATE1, 'MM'))
SELECT n,
NVL(ROUND(SUM(Debit),2), 0)
FROM (select add_months(to_date('01/01/2006', 'dd/mm/yyyy'), level - 1) n FROM dual connect by level <= 12) months
LEFT JOIN S1
ON months.n = date1
GROUP BY n
ORDER BY n -
Dynamic SQL Issue ORA-00904:invalid identifier error
Here is my SP
create or replace procedure srini_ref_cursor_test(p_county_code IN VARCHAR2,
p_ref_cur out PK_FR_TYPES.cursor_type) is
query_str varchar2(5000);
begin
query_str := 'SELECT * FROM dw_county where county_name = :P ';
open p_ref_cur for query_str USING p_county_code;
insert into srini_query_str_test values (query_str);
commit;
end srini_ref_cursor_test;
When I pass the p_county_code = Adams working find.
create or replace procedure srini_ref_cursor_test(p_county_code IN VARCHAR2,
p_ref_cur out PK_FR_TYPES.cursor_type) is
query_str varchar2(5000);
begin
query_str := 'SELECT * FROM dw_county where county_name in ('||p_county_code||')';
open p_ref_cur for query_str;
insert into srini_query_str_test values (query_str);
commit;
end srini_ref_cursor_test;
When I pass the p_county_code = Adams for above SP I got the following error
ORA-00904: "ADAMS": invalid identifier error
With out Bind variables how Can I pass the Char type values in Dynamic SQL ?
I would like to pass multipule values to p_county_code like 'Adams','Ashley' etc
How Can I do this ?
Thank for great help.
SriniHow do I write the Dynamic SQL for
SELECT * FROM DW_COUNTY WHERE COUNTY_NAME LIKE 'Ad%'
The usual way...
hr@ORA10G>
hr@ORA10G> var str varchar2(1000);
hr@ORA10G> var cr refcursor;
hr@ORA10G>
hr@ORA10G> exec :str := 'select * from employees where first_name like ''A%''';
PL/SQL procedure successfully completed.
hr@ORA10G> -- note the escape character for each single quote
hr@ORA10G> print str
STR
select * from employees where first_name like 'A%'
hr@ORA10G>
hr@ORA10G> exec open :cr for :str;
PL/SQL procedure successfully completed.
hr@ORA10G> print cr
EMPLOYEE_ID FIRST_NAME LAST_NAME EMAIL PHONE_NUMBER HIRE_DATE JOB_ID SALARY COMMISSION_PCT MANAGER_ID DEPARTMENT_ID
103 Alexander Hunold AHUNOLD 590.423.4567 03-JAN-90 IT_PROG 9000 102 60
115 Alexander Khoo AKHOO 515.127.4562 18-MAY-95 PU_CLERK 3100 114 30
121 Adam Fripp AFRIPP 650.123.2234 10-APR-97 ST_MAN 8200 100 50
147 Alberto Errazuriz AERRAZUR 011.44.1344.429278 10-MAR-97 SA_MAN 12000 .3 100 80
158 Allan McEwen AMCEWEN 011.44.1345.829268 01-AUG-96 SA_REP 9000 .35 146 80
167 Amit Banda ABANDA 011.44.1346.729268 21-APR-00 SA_REP 6200 .1 147 80
175 Alyssa Hutton AHUTTON 011.44.1644.429266 19-MAR-97 SA_REP 8800 .25 149 80
185 Alexis Bull ABULL 650.509.2876 20-FEB-97 SH_CLERK 4100 121 50
187 Anthony Cabrio ACABRIO 650.509.4876 07-FEB-99 SH_CLERK 3000 121 50
196 Alana Walsh AWALSH 650.507.9811 24-APR-98 SH_CLERK 3100 124 50
10 rows selected.
hr@ORA10G>
hr@ORA10G>pratz -
ORA-00904 invalid identifier error
Here are the steps to reproduce this. My DB version is 9i R2.
1) create table xmlsun1 of xmltype;
2) create table xmlsun2 as select * from xmlsun1;
Two Tables of XML Type created successfully
3) insert into xmlsun1 values(xmltype('<employees><employee id="35"><FirstName>Tom</FirstName><LastName>Kyte</LastName></employee></employees>'));
4) insert into xmlsun2 values(xmltype('<employees><employee id="35"><FirstName>Tom</FirstName><LastName>Kyte</LastName></employee></employees>'));
Now when i query, i can see one record in each tables.
The problem is only when updation.
5) update xmlsun1 x
set value(x) = updatexml(value(x),'/employees/employee/@id','37')
where existsnode(value(x),'/employees/employee[FirstName = "Tom"]') = 1;
1 row updated
6) update xmlsun2 x
set value(x) = updatexml(value(x),'/employees/employee/@id','37')
where existsnode(value(x),'/employees/employee[FirstName = "Tom"]') = 1;
This updation fails with the error : ORA-01775: looping chain of synonyms
I tried to change alias of xmlsun2 to y
update xmlsun2 y
set value(y) = updatexml(value(y),'/employees/employee/@id','37')
where existsnode(value(y),'/employees/employee[FirstName = "Tom"]') = 1;
I get an error saying that Y is an invalid identifier. Now, how can i update the table xmlsun2? I can't use the alias x nor any other alias.
Thanks,
SundarI've filed bug 5560960 for this behavoir, which is still not what you are describing.. Do you have SYNONYMS defined somewhere in your example ?
$ sqlplus scott/tiger @testcase3
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Sep 22 11:59:46 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SQL> drop table xmlsun1
2 /
Table dropped.
SQL> create table xmlsun1 of xmltype
2 /
Table created.
SQL> drop table xmlsun2
2 /
Table dropped.
SQL> create table xmlsun2 as select * from xmlsun1
2 /
Table created.
SQL> insert into xmlsun1 values( xmltype ('<employees><employee id="35"><FirstName>Tom</FirstName><LastName>Kyte</LastName></employee></employees>') )
2 /
1 row created.
SQL> insert into xmlsun2 values( xmltype ('<employees><employee id="35"><FirstName>Tom</FirstName><LastName>Kyte</LastName></employee></employees>') )
2 /
1 row created.
SQL> update xmlsun1 x
2 set value(x) = updatexml(value(x),'/employees/employee/@id','37')
3 where existsnode(value(x),'/employees/employee[FirstName = "Tom"]') = 1
4 /
1 row updated.
SQL> update xmlsun2 x
2 set value(x) = updatexml(value(x),'/employees/employee/@id','37')
3 where existsnode(value(x),'/employees/employee[FirstName = "Tom"]') = 1
4 /
where existsnode(value(x),'/employees/employee[FirstName = "Tom"]') = 1
ERROR at line 3:
ORA-00904: "X": invalid identifier
SQL> update xmlsun2 y
2 set value(y) = updatexml(value(y),'/employees/employee/@id','37')
3 where existsnode(value(y),'/employees/employee[FirstName = "Tom"]') = 1
4 /
where existsnode(value(y),'/employees/employee[FirstName = "Tom"]') = 1
ERROR at line 3:
ORA-00904: "Y": invalid identifier
SQL> -
Discoverer report :ORA -00904 Invalid Identifier
Hi ,
we are using an apps mode EUL (version4i) ,
in the business area "Account Receivables"--->Customer Transaction Lines Folder,
when we pull up any item from this folder to create a report, it shows a
"ORA-00904 Invalid Identifier " error
how to fix it , whether the Item might be Deleted in view definition of this folder,
just a refresh of the folder is enough ?
thanks in advanceHi,
Refreshing the folder should be your first step.
Rod West -
Advanced Conditions causing ORA-00904 invalid identifier
I have another weird thing going on...
It may be the complexity of the data I'm pulling, but I'm going to simplify the problem first...
I have several conditions in my workbook that I need to be true regardless then I need the following (this is a payroll thing):
((Total Regular Hours > 40 AND Total Overtime = 0) OR (Total Overtime > 0 AND (Total Regular Hours - Total Overtime Hours) <> 40))
So, I'm using Discoverer Plus 10g and if I create separate conditions for Total Overtime > 0 and (Total Regular Hours - Total Overtime Hours) <> 40) it will work, but if I try to combine them into one condition (so I can then add my OR and the other 2 conditions) it gives me the "ORA-00904 invalid identifier" error and will not run.
The only way I've been able to do it is to create 3 conditions and 2 worksheets. That way, I can add (Total Regular Hours > 40 AND Total Overtime = 0) in one condition and apply it to one sheet; then I the other 2 separate conditions can be applied to the other worksheet.
I hate having to have 2 worksheets when I should be able to create an advanced condition... anyone have any ideas?
Regards,
EmilyIt is actually a typo in the message because I have a calculated column that calculates the difference... sorry.
I did try the idea of running the SQL that was generated in SQL Developer and it doesn't look right.
It did all my other conditions under the where, but then where I would have thought it should do another and it did a WHERE.... see below. (I only pasted from the from statement on to save room)
FROM HRBG_PEOPLE_ASSIGNMENT o393615, APPS.PTEN_PAY_BEE_V o393616
WHERE ( (o393616.ASSIGNMENT_ID = o393615.ASSIGNMENT_ID))
AND (o393615.BG_SECURITY_FLAG_CODE = 'Y')
AND (o393616.DATE_EARNED BETWEEN o393615.ASSIGNMENT_START_DATE AND o393615.ASSIGNMENT_END_DATE AND o393616.DATE_EARNED BETWEEN o393615.RECORD_START_DATE AND o393615.RECORD_END_DATE)
AND (o393616.DATE_EARNED IN (:"Date Earned Dates"))
AND (o393616.EFFECTIVE_DATE = :"Period End Date")))))
WHERE ( ( NP100 ) > 40 AND ( NP101 ) = 0)
AND ( ( NP104 ) <> 40 AND ( NP105 ) > 0)
ORDER BY E393849 ASC ;
Do you see the WHERE that I marked in BOLD? That should be an AND...
I even tried creating one crazy long condition to include everything in one and still got the same error and it produced the same SQL. I am thinking it has to do with the fact that I'm actually showing group totals for Regular Hours and Overtime and then subtracting them to get the difference. It all breaks when I add that difference in with the others. If I keep it separate, it does fine.
By the way, the error I get when running just the SQL is "not all variables bound"
Thanks,
Emily -
ORA-01427:single-row sub query returns more than one row (group by)
Hello every one, I am very new to this field , and Right now I am working with this sql, where BEG_BAL_WKST,WKST_RECEIVED_NUM,WKST_PROCESSED_NUM,WKST_CANCELED_NUM are needs to be grouped by,but I am getting the "single-row sub query returns more than one row".
This is the query I am using in my source qualifier:
select
SUM(tmp.WIP_TO_BILL_LOC_AMT) AS WIP_TO_BILL_LOC_AMT,
sum(tmp.REALIZATION_LOC_AMT) AS REALIZATION_LOC_AMT,
SUM(tmp.NEG_REAL_LOC_AMT) AS NEG_REAL_LOC_AMT,
sum(tmp.POS_REAL_LOC_AMT) AS POS_REAL_LOC_AMT,
sum(tmp.BILL_IN_ADVANCE_LOC_AMT) AS BILL_IN_ADVANCE_LOC_AMT,
sum(tmp.CARRY_FORWARD_LOC_AMT) AS CARRY_FORWARD_LOC_AMT,
sum(tmp.BILL_TO_CLIENT_LOC_AMT) AS BILL_TO_CLIENT_LOC_AMT,
sum(tmp.REMAIN_WIP_TO_BILL_LOC_AMT) REMAIN_WIP_TO_BILL_LOC_AMT,
sum(tmp.AR_INV_AMT) AS AR_INV_AMT,
sum(tmp.AR_TAX_AMT) AS AR_TAX_AMT,
tmp.BEG_BAL_WKST_NUM AS BEG_BAL_WKST_NUM,
tmp.WKST_RECEIVED_NUM AS WKST_RECEIVED_NUM,
tmp.WKST_PROCESSED_NUM AS WKST_PROCESSED_NUM,
tmp.WKST_CANCELED_NUM AS WKST_CANCELED_NUM,
tmp.DURATION AS DURATION,
tmp.NUM_DAYS AS NUM_DAYS,
tmp.NUM_HOURS AS NUM_HOURS,
tmp.NUM_MINUTES AS NUM_MINUTES,
tmp.NUM_SECONDS AS NUM_SECONDS,
tmp.LEAD_PROJECT_OFFICE_CODE AS LEAD_PROJECT_OFFICE_CODE,
tmp.LEAD_PROJECT_TEAM_CODE AS LEAD_PROJECT_TEAM_CODE,
tmp.ORG_ID AS ORG_ID,
tmp.RPT_DATE AS RPT_DATE,
tmp.RPT_DATE_WID AS RPT_DATE_WID,
tmp.LOCAL_CURR_CODE AS LOCAL_CURR_CODE,
tmp.USD_EXCH_RATE AS USD_EXCH_RATE,
tmp.EUR_EXCH_RATE AS EUR_EXCH_RATE,
tmp.GBP_EXCH_RATE AS GBP_EXCH_RATE
from(
SELECT
WIP_TO_BILL_LOC_AMT as WIP_TO_BILL_LOC_AMT ,
REALIZATION_LOC_AMT AS REALIZATION_LOC_AMT,
NEG_REAL_LOC_AMT AS NEG_REAL_LOC_AMT ,
POS_REAL_LOC_AMT AS POS_REAL_LOC_AMT,
BILL_IN_ADVANCE_LOC_AMT AS BILL_IN_ADVANCE_LOC_AMT ,
CARRY_FORWARD_loc_AMT AS CARRY_FORWARD_LOC_AMT,
bill_to_client_LOC_AMT AS BILL_TO_CLIENT_LOC_AMT ,
REMAIN_WIP_TO_BILL_LOC_AMT AS REMAIN_WIP_TO_BILL_LOC_AMT,
AR_inv_AMT AS AR_INV_AMT,
ar_tax_amt AS AR_TAX_AMT,
(SELECT count(distinct(RPAD(INTEGRATION_ID,32)))
FROM wc_twfs_olb_invoice_history_f
WHERE ((inv_status_type='FIN'AND inv_status_code NOT IN ('COMPLETE','PROCESSED'))
OR (inv_status_type='WS' AND inv_status_code NOT IN ('PRC'))) --COMPLETED
AND to_char((sysdate-5),'YYYYMMDD') between to_char(status_start_dt,'YYYYMMDD') and to_char(status_end_dt,'YYYYMMDD')group by rpad(integration_id,32)) AS BEG_BAL_WKST_NUM ,
(SELECT count(distinct(RPAD(INTEGRATION_ID,32)))
FROM wc_twfs_olb_invoice_history_f
WHERE (inv_status_code='NEW')
AND to_char((sysdate-4),'YYYYMMDD') between to_char(status_start_dt,'YYYYMMDD') and to_char(status_end_dt,'YYYYMMDD')group by rpad(integration_id,32))AS WKST_RECEIVED_NUM ,
(SELECT count(distinct(RPAD(INTEGRATION_ID,32)))
FROM wc_twfs_olb_invoice_history_f
WHERE ((inv_status_type='FIN' and inv_status_code IN ('COMPLETE','PROCESSED'))
OR (inv_status_type='WS' AND inv_status_code IN ('PRC'))) --COMPLETED
AND to_char((sysdate-4),'YYYYMMDD') between to_char((status_start_dt),'YYYYMMDD') and to_char((status_end_dt),'YYYYMMDD')group by rpad(integration_id,32))AS WKST_PROCESSED_NUM ,
(SELECT count(distinct(RPAD(INTEGRATION_ID,32)))
FROM wc_twfs_olb_invoice_history_f
WHERE (inv_status_type='FIN' AND inv_status_code='CANCELLED')
AND to_char((sysdate-4),'YYYYMMDD') between to_char((status_start_dt),'YYYYMMDD') and to_char((status_end_dt),'YYYYMMDD')group by rpad(integration_id,32)) AS WKST_CANCELED_NUM,
DURATION AS DURATION,
NUM_DAYS AS NUM_DAYS,
NUM_HOURS AS NUM_HOURS,
NUM_MINUTES AS NUM_MINUTES,
NUM_SECONDS AS NUM_SECONDS,
lead_project_office_code AS LEAD_PROJECT_OFFICE_CODE,
lead_project_team_code AS LEAD_PROJECT_TEAM_CODE,
org_id AS ORG_ID,
trunc(sysdate-1) AS RPT_DATE,
to_char((sysdate-1),'YYYYMMDD') AS RPT_DATE_WID,
--last_day(a.report_date) mth_end_dt,
LOC_CURR_CODE AS LOCAL_CURR_CODE,
usd_exch_rate AS USD_EXCH_RATE,
eur_exch_rate AS EUR_EXCH_RATE,
gbp_exch_rate AS GBP_EXCH_RATE
FROM Wc_twfs_olb_invoice_history_f
Where
RPT_DT_MCAL_PERIOD_WID =(select max(RPT_DT_MCAL_PERIOD_WID)from Wc_twfs_olb_invoice_history_f))tmp
group by BEG_BAL_WKST_NUM,WKST_RECEIVED_NUM,WKST_PROCESSED_NUM,WKST_CANCELED_NUM,DURATION,NUM_DAYS,NUM_HOURS,NUM_MINUTES,NUM_SECONDS,
LEAD_PROJECT_OFFICE_CODE,LEAD_PROJECT_TEAM_CODE,ORG_ID,RPT_DATE,RPT_DATE_WID,
LOCAL_CURR_CODE,USD_EXCH_RATE,EUR_EXCH_RATE,GBP_EXCH_RATE;
Can you please suggest me what to do next, and what would be the solution to this.
Thanks a lot in advance. please show me some direction.you may want to change it something like
SELECT SUM(Wip_To_Bill_Loc_Amt) AS Wip_To_Bill_Loc_Amt,
SUM(Realization_Loc_Amt) AS Realization_Loc_Amt,
SUM(Neg_Real_Loc_Amt) AS Neg_Real_Loc_Amt,
SUM(Pos_Real_Loc_Amt) AS Pos_Real_Loc_Amt,
SUM(Bill_In_Advance_Loc_Amt) AS Bill_In_Advance_Loc_Amt,
SUM(Carry_Forward_Loc_Amt) AS Carry_Forward_Loc_Amt,
SUM(Bill_To_Client_Loc_Amt) AS Bill_To_Client_Loc_Amt,
SUM(Remain_Wip_To_Bill_Loc_Amt) AS Remain_Wip_To_Bill_Loc_Amt,
SUM(Ar_Inv_Amt) AS Ar_Inv_Amt,
SUM(Ar_Tax_Amt) AS Ar_Tax_Amt,
COUNT(DISTINCT CASE
WHEN ((Inv_Status_Type = 'FIN' AND
Inv_Status_Code NOT IN ('COMPLETE', 'PROCESSED')) OR
(Inv_Status_Type = 'WS' AND Inv_Status_Code NOT IN ('PRC'))) --COMPLETED
AND To_Char((SYSDATE - 5), 'YYYYMMDD') BETWEEN
To_Char(Status_Start_Dt, 'YYYYMMDD') AND
To_Char(Status_End_Dt, 'YYYYMMDD') THEN
Rpad(Integration_Id, 32)
END) AS Beg_Bal_Wkst_Num,
/*(SELECT COUNT(DISTINCT(Rpad(Integration_Id, 32)))
FROM Wc_Twfs_Olb_Invoice_History_f
WHERE ((Inv_Status_Type = 'FIN' AND
Inv_Status_Code NOT IN ('COMPLETE', 'PROCESSED')) OR
(Inv_Status_Type = 'WS' AND Inv_Status_Code NOT IN ('PRC'))) --COMPLETED
AND To_Char((SYSDATE - 5), 'YYYYMMDD') BETWEEN
To_Char(Status_Start_Dt, 'YYYYMMDD') AND
To_Char(Status_End_Dt, 'YYYYMMDD')
GROUP BY Rpad(Integration_Id, 32)) AS Beg_Bal_Wkst_Num,
(SELECT COUNT(DISTINCT(Rpad(Integration_Id, 32)))
FROM Wc_Twfs_Olb_Invoice_History_f
WHERE (Inv_Status_Code = 'NEW')
AND To_Char((SYSDATE - 4), 'YYYYMMDD') BETWEEN
To_Char(Status_Start_Dt, 'YYYYMMDD') AND
To_Char(Status_End_Dt, 'YYYYMMDD')
GROUP BY Rpad(Integration_Id, 32)) AS Wkst_Received_Num,
(SELECT COUNT(DISTINCT(Rpad(Integration_Id, 32)))
FROM Wc_Twfs_Olb_Invoice_History_f
WHERE ((Inv_Status_Type = 'FIN' AND
Inv_Status_Code IN ('COMPLETE', 'PROCESSED')) OR
(Inv_Status_Type = 'WS' AND Inv_Status_Code IN ('PRC'))) --COMPLETED
AND To_Char((SYSDATE - 4), 'YYYYMMDD') BETWEEN
To_Char((Status_Start_Dt), 'YYYYMMDD') AND
To_Char((Status_End_Dt), 'YYYYMMDD')
GROUP BY Rpad(Integration_Id, 32)) AS Wkst_Processed_Num,
(SELECT COUNT(DISTINCT(Rpad(Integration_Id, 32)))
FROM Wc_Twfs_Olb_Invoice_History_f
WHERE (Inv_Status_Type = 'FIN' AND Inv_Status_Code = 'CANCELLED')
AND To_Char((SYSDATE - 4), 'YYYYMMDD') BETWEEN
To_Char((Status_Start_Dt), 'YYYYMMDD') AND
To_Char((Status_End_Dt), 'YYYYMMDD')
GROUP BY Rpad(Integration_Id, 32)) AS Wkst_Canceled_Num,*/
Duration AS Duration,
Num_Days AS Num_Days,
Num_Hours AS Num_Hours,
Num_Minutes AS Num_Minutes,
Num_Seconds AS Num_Seconds,
Lead_Project_Office_Code AS Lead_Project_Office_Code,
Lead_Project_Team_Code AS Lead_Project_Team_Code,
Org_Id AS Org_Id,
Trunc(SYSDATE - 1) AS Rpt_Date,
To_Char((SYSDATE - 1), 'YYYYMMDD') AS Rpt_Date_Wid,
--last_day(a.report_date) mth_end_dt,
Loc_Curr_Code AS Local_Curr_Code,
Usd_Exch_Rate AS Usd_Exch_Rate,
Eur_Exch_Rate AS Eur_Exch_Rate,
Gbp_Exch_Rate AS Gbp_Exch_Rate
FROM Wc_Twfs_Olb_Invoice_History_f
WHERE Rpt_Dt_Mcal_Period_Wid =
(SELECT MAX(Rpt_Dt_Mcal_Period_Wid)
FROM Wc_Twfs_Olb_Invoice_History_f)
GROUP BY Beg_Bal_Wkst_Num,
Wkst_Received_Num,
Wkst_Processed_Num,
Wkst_Canceled_Num,
Duration,
Num_Days,
Num_Hours,
Num_Minutes,
Num_Seconds,
Lead_Project_Office_Code,
Lead_Project_Team_Code,
Org_Id,
Rpt_Date,
Rpt_Date_Wid,
Local_Curr_Code,
Usd_Exch_Rate,
Eur_Exch_Rate,
Gbp_Exch_Rate;Edited by: 986006 on Mar 4, 2013 1:08 PM -
Hi everyone,
has anyone else had this error which has been driving me round the bend during the last three days?
I have an interactive report which used to work fine.
Now it happens (when the page loads/a filter is en- or disabled) that - from time to time, but unpredictable - I receive
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
The report is based on a table function.
I will try to set up a testcase and post the link here, but so far I haven't managed to force the error to occur.
But maybe someone else has already bumped into this kind of error? I would be grateful for any hints!
Best regards,
Sabine
Application Express 4.1.0.00.32
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit ProductionHi Jari,
I changed the type definition (the return type of the table function) and extended the select list in the source of the IR.
I do not use 'select *' but reference every column explicitly. So APEX easked me whether to add the new column.
I also tried deleting in recreating the region, but no luck.
Any more ideas?
Best regards,
Sabine -
Internal SYS_OP_ATG function generates "ORA-00904: : invalid identifier"
After gathering system statistics a MERGE statement within a PLSQL block now always raises "ORA-00904: : invalid identifier". Investigation points to internal SQL executed by the CBO using the SYS_OP_ATG function to be the culprit. What is this function and why does it raise "ORA-00904: : invalid identifier"? As a temporary solution deleting system statistics has made the problem disappear. My concern is that it will reappear.
Merge statement is within a procedure within a package. Nothing had been re-compiled. System statistics were gathered then the following statement errors every time. There is an exception handler around it which raises the "ORA-00904: : invalid identifier". Delete system stats and it all works fine again:
MERGE INTO lp_data lp
USING (
SELECT
f.ubimsg_id ubimsg_id,
f.endpoint_id endpoint_id,
f.msg_created_date msg_created_date,
t.end_time end_time,
DECODE(t.units_used,255,0, t.units_used) units_used,
DECODE(t.units_used,255,'N', 'Y') reading_received
FROM TABLE (CAST (tab_lp_values AS load_profiles)) t,
(SELECT ubirec.ubimsg_id ubimsg_id ,ubirec.endpoint_id endpoint_id, ubirec.msg_created_date msg_created_date FROM dual) f
) lp_rec
on (lp.endpoint_id = lp_rec.endpoint_id
and lp.end_time = lp_rec.end_time)
when matched then
update set lp.entry_date = lp_rec.msg_created_date,
lp.ubimsg_id = lp_rec.ubimsg_id,
lp.units_used = lp_rec.units_used / 10,
lp.reading_received = lp_rec.reading_received
when not matched then
insert (lp.endpoint_id,
lp.end_time,
lp.entry_date,
lp.ubimsg_id,
lp.units_used,
lp.reading_received)
values (lp_rec.endpoint_id,
lp_rec.end_time,
lp_rec.msg_created_date,
lp_rec.ubimsg_id,
lp_rec.units_used / 10,
lp_rec.reading_received );
The line FROM TABLE (CAST (tab_lp_values AS load_profiles)) t casts a plsql object collection. An SQL trace showed the following SQL which must be internal SQL generated for the MERGE statement.
SELECT distinct TBL$OR$IDX$PART$NUM("LP_DATA", 0, 1, 0, "END_TIME") FROM
(SELECT "LP_REC"."END_TIME" "END_TIME" FROM (SELECT :B1 "UBIMSG_ID",:B2 "ENDPOINT_ID",:B3 "MSG_CREATED_DATE",
SYS_OP_ATG(VALUE(KOKBF$),1,2,2) "END_TIME",
DECODE(SYS_OP_ATG(VALUE(KOKBF$),2,3,2),255,0,SYS_OP_ATG(VALUE(KOKBF$),2,3,2)) "UNITS_USED",
DECODE(SYS_OP_ATG(VALUE(KOKBF$),2,3,2),255,'N','Y') "READING_RECEIVED"
FROM TABLE(CAST(:B4 AS "LOAD_PROFILES") ) "KOKBF$","SYS"."DUAL" "DUAL") "LP_REC") ORDER BY 1
Without system statistics the trace did not have this statement in it, and the explain plan for the MERGE differed.
Oracle 11.1.0.7.0 Windows 32-BIT.
select * from v$version;
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
SQL> show parameter compatible
compatible string 11.1.0.0.0
Any help to explain / resolve this issue would be much appreciated.Duplicate thread: CBO on 11G generates ORA-00904 with SYS_OP_ATG
-
Getting ora:00904 invalid indentifier error while running i query
Hi,
I have a remote database and local database both are oracle 10gR2.Now i have written the below mentioned query in my local database and is working fine,but in case remote database it is throughing error ora:00904 invalid indentifier.
I had export the dump from remote db and import it on my local db and i tried the same and it is working fine on local after that also.
As i believe that this error usually come for column name not exist or column name or it's length or for any special character in column name of the table.But as i said it is working fine on local db but not in remote db though i am using the same dump for local and remote.
Though when i am querying the table i can able to fetch data for the any record but when i am using the below mentioned query for the same i am getting the error.As i am doing this to fecth the data for child parent related relationship.
Can any one suggest is there anything related to configaration or something else.
Please do let me know if you do want some more information on the query what i am doing inside of it.
Rgds,
Anit
Edited by: Anit A. on Sep 1, 2008 2:32 AM
Edited by: Anit A. on Sep 1, 2008 2:33 AMWITH t
AS
SELECT decode(t.spnlevel
,3,t.u_quotesdtlid
,2,decode((select count(*)
from u_quotesdtl t2
where t2.u_quotesdtlid = t.u_quotesdtlid
and t2.parentspn = (t2.jobgroupid||':'||t2.jobtype)
),0,(select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '3'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
),t.u_quotesdtlid
,1,decode((select count(*)
from u_quotesdtl t2
where t2.QUOTEID = t.QUOTEID
and t2.parentspn = (t2.jobgroupid||':'||t2.jobtype)
),0,t.u_quotesdtlid,decode((select count(*)
from u_quotesdtl t3
where t3.QUOTEID = t.QUOTEID
and t3.parentspn = (t3.jobgroupid||':'||t3.jobtype)
and t3.u_quotesdtlid in (select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
),0,(select t4.u_quotesdtlid
from u_quotesdtl t4
,(select t1.parentspn
,t1.jobtype
,t1.jobgroupid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
) t5
where t4.spnitemcode = t5.parentspn
and t4.spnlevel = '3'
and t4.jobtype = t5.jobtype
and t4.jobgroupid = t5.jobgroupid
and t4.QUOTEID = t.QUOTEID
(select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
,null,t.u_quotesdtlid) as parentquoteid
,t.u_quotesdtlid as quotesdtlid
,t.spnlevel as spnlevel
FROM u_quotesdtl t
WHERE t.QUOTEID ='som key id'
ORDER BY parentquoteid,t.spnlevel desc
select * from t; -
Dynamic SQL Error -ORA-00904: invalid identifier
Hello!
I'm really hoping I can get some fast help on this. In the interest of honesty, this is for a university oracle programming assignment. I've searched everywhere I can for the answer and haven't had any luck.
Anyway, the problem in a nutshell. I have to write a package to write a text file. The formatting information for the file is held in a table, which has columns to define the various characteristics like justification, padding character and field value.
RECORDTYPE FIELDNAME FIELDVALUE FIELDSIZE FIELDORDER PADDINGCHAR JUSTIFICATION DATASOURCE
7 CreditTotal v_credit 10 5 '0' LPAD PROGRAM
7 RecordType '7' 1 1 ' ' RPAD HARDCODE
I can build the whole file except this footer. the FieldValue "v_credit" references a variable that has the calculated total of the credit amounts for the file. There are also "v_debit", and "(v_credit-v_debt)" entries.
My question seems simple... How can I use this VARCHAR2 value from the table, and have it reference the variable within a Dynamic SQL string? If I use the textvalue of the column in the SQL string it gives me the invalid identifier error when it hits the EXECUTE IMMEDIATE statement. There is another row for the header which has "to_char(sysdate,'DDMMYYYY')" in it, and that runs fine. I'm assuming because they are native SQL statements and variables.
I have tried encapsulating the v_credit in "s, and using dynamica bind variables but had the same problem passing the names to the USING clause.
The SQL string created by the procedure is: SELECT LPAD(v_credit,10,'0' ) FROM dual
The full error is:
ORA-00904: "V_CREDIT": invalid identifier
ORA-06512: at "BWOOD.PKG_BRIAN", line 108
ORA-06512: at line 2
Line 108 is the EXECUTE IMMEDIATE statement
I would really appreciate someones help! I'm happy to post the procedure I've written, with the caveat that it's sloppy student work and needs cleaning up of all the experimental commented attempts:)
Edited by: user5426606 on 20-May-2009 03:34 - Added a few more facts.Thank you for the fast replies. I'll post a short chunk of code to demonstrate.
The actual procedure is quite a bit longer, but this should give you the idea.
PROCEDURE build_dbfile (p_settlement_date IN DATE, p_settlement_key IN VARCHAR2, p_type IN VARCHAR2) AS
v_sqlString VARCHAR2(4000) := 'SELECT ';
v_rectype NUMBER := 7;
v_line LONG;
v_debit NUMBER := 0;
v_credit NUMBER := 0;
v_nrRecords NUMBER := 0;
CURSOR c_settlement IS... -- to select records for data rows
-- cursor to select the rows with the file formatting and data info
CURSOR c_header IS SELECT NVL(fieldvalue,fieldname) db_field, <---- selects the data column
fieldsize,
NVL(paddingchar, ''' ''') paddingchar,
NVL(justification,'LPAD') justification,
datasource
FROM FSS_DESKBANK_REF
WHERE recordtype = r_rec_types.recordtype
ORDER BY recordType, fieldorder;
-- SELECT to get the SUM of datarows for v_credit
SELECT SUM(transactionamount)
INTO v_credit...
-- SELECT to get the SUM of datarows for v_debit
SELECT SUM(transactionamount)
INTO v_debit....
FOR r_head IN c_header LOOP
v_sqlString := v_sqlString || r_head.justification|| '('
|| r_head.db_field ||','
|| r_head.fieldsize || ','
|| r_head.paddingchar || ')';
v_sqlString := v_sqlString || ' FROM ' || v_tbl_name;
DBMS_OUTPUT.PUT_LINE('SQL --> '||v_sqlString);
EXECUTE IMMEDIATE v_sqlString INTO v_line;
END LOOP;
DBMS_OUTPUT.PUT_LINE(v_line);
END build_dbfile;So the loop goes through the table rows, grabs each data value and formatting column, and builds the sql string, which is then passed to the execute statement. The issue is the ones where the datarow contains a reference to v_credit, and the error is generated. ie r_head.db_field contains the string "v_credit"
Satish, the sql does look like that in the string, but the string is built from the table, not hardcoded. ie v_sqlString = "SELECT LPAD(v_credit,10,'0' ) FROM dual" when it is passed to the EXECUTE IMMEDIATE.
Edited by: user5426606 on 20-May-2009 05:19 -
ORA-00904 - invalid identifier when adding new column to the report query
Hi,
I am trying to add a new field to an existing bespoke report query. When I click on ok, I get the following error
message: "ORA-00904: <field name> : invalid identifier ==> <field_name>
Any ideas what is causing this problem? Version of the report builder is : 6.0.8 and is connected to a 10.2 db.
Any help appreciated.
Many Thanks,
Praveen
Edited by: praveenrn on May 21, 2009 2:38 PMWhat is the field name ? Maybe a reserved word ? Change to "my_new_variable" to check...
Cheers,
Jens Rettig -
How to write multi row sub query with the row containing range of values?
Hi all,
I have to include a column which contains weight ranges and it should come fom table called "report_range_parameters"
The following query will reutrn those weight ranges.
select report_parameter_min_value || ' -> ' || report_parameter_max_value
from report_range_parameters
WHERE report_range_parameters.report_parameter_id = 2359
and report_range_parameters.report_parameter_group = 'GVW_GROUP'
and report_range_parameters.report_parameter_name = 'GVW_NAME'
The below query should return the values group by those weight ranges.
How could I write that sub query?
select SUM(NVL("Class 0", 0)) "Class 0" ,
SUM(NVL("Class 1", 0)) "Class 1" ,
SUM(NVL("Class 2", 0)) "Class 2" ,
SUM(NVL(" ", 0)) "Total"
FROM (
SELECT report_data.bin_start_date_time start_date_time,
SUM(DECODE(report_data.gvw, 0, report_data.gvw_count, 0)) "Class 0" ,
SUM(DECODE(report_data.gvw, 1, report_data.gvw_count, 0)) "Class 1" ,
SUM(DECODE(report_data.gvw, 2, report_data.gvw_count, 0)) "Class 2" ,
SUM(NVL(report_data.gvw_count, 0)) " "
FROM report_data
GROUP BY report_data.bin_start_date_time
) results
RIGHT OUTER JOIN tmp_bin_periods
ON results.start_date_time >= tmp_bin_periods.bin_start_date_time
AND results.start_date_time < tmp_bin_periods.bin_end_date_time
GROUP BY tmp_bin_periods.bin_start_date_time,
tmp_bin_periods.bin_end_date_time Thanks.
Edited by: user10641405 on Jun 15, 2009 3:14 PM
Edited by: user10641405 on Jun 15, 2009 3:17 PMHi,
Assuming the following 4 things:
(1) report_range_parameters contains data like this, from your [previous thread|http://forums.oracle.com/forums/message.jspa?messageID=3541079#3541079]
id group name min_value max_value
1 gvw_group gvw_name 0 5
2 gvw_group gvw_name 5 10
3 gvw_group gvw_name 10 15(2) max_value is actually outside the range (that is, a value of exactly 5.000 is counted in the '5->10' range, not the '0->5' range)
(3) the range has to match some column x that is in one of the tables in your main query
(4) You want to add that column x to the GROUP BY clause
then you shopuld do somehting like this:
select SUM(NVL("Class 0", 0)) "Class 0" ,
SUM(NVL("Class 1", 0)) "Class 1" ,
SUM(NVL("Class 2", 0)) "Class 2" ,
SUM(NVL(" ", 0)) "Total"
, report_parameter_min_value || ' -> ' || report_parameter_max_value AS weight_range -- New
FROM (
SELECT report_data.bin_start_date_time start_date_time,
SUM(DECODE(report_data.gvw, 0, report_data.gvw_count, 0)) "Class 0" ,
SUM(DECODE(report_data.gvw, 1, report_data.gvw_count, 0)) "Class 1" ,
SUM(DECODE(report_data.gvw, 2, report_data.gvw_count, 0)) "Class 2" ,
SUM(NVL(report_data.gvw_count, 0)) " "
FROM report_data
GROUP BY report_data.bin_start_date_time
) results
RIGHT OUTER JOIN tmp_bin_periods
ON results.start_date_time >= tmp_bin_periods.bin_start_date_time
AND results.start_date_time < tmp_bin_periods.bin_end_date_time
LEFT OUTER JOIN report_range_parameters -- New
ON x >= report_parameter_min_value -- New
AND x < report_parameter_max_value -- New
AND report_range_parameters.report_parameter_id = 2359 -- New
and report_range_parameters.report_parameter_group = 'GVW_GROUP' -- New
and report_range_parameters.report_parameter_name = 'GVW_NAME' -- New
GROUP BY tmp_bin_periods.bin_start_date_time,
tmp_bin_periods.bin_end_date_time
, x -- New -
I have a PL/SQL script processing information between Oracle database and MySQL database. My script ran perfectly with DG4ODBC 11.1.0.7. Then we upgraded Oracle to 10.2.0 and DG4ODBC 11.2.0.2. Now if I run my script from Solaris command line like ./myscript.shl, I get the following errors:
PL/SQL: ORA-00904: "cmswhit_moodle1"."mdl_grade_grades"."finalgrade": invalid identifier
PL/SQL: ORA-00904: "cmswhit_moodle1"."mdl_question_states"."attempt": invalid identifier
The strange thing is if I run the same query by cut and paste into sqlplus from command line, the query works perfectly without any problems.
What is the cause of this problem?
Any help would be greatly appreciated.
JeffreyHi Klaus,
The problem was solved after I updated MySQL ODBC to a new version from 5.1.8 to 5.1.13.
Summary of the problem and its solution:
The Problem: It appears that dg4odbc 11.2.0.2 requires a newer version of MyODBC. Previously I used MyODBC 5.1.8 which ran into problems with dg4odbc 11.20.0.2.
The Solution: After I updated MyODBC to 5.1.13, my PL/SQL scripts all work.
I need to point out that with MyODBC 5.1.8, I can run queries and updates from SQL*Plus console, but now PL/SQL scripts.
I'll close this thread.
Once again, thank you and happy holidays.
Jeffrey -
Error ORA-00904 invalid identifier
There are so many different employee rates colums in the employee table .
e.g)
emp_rate_1 column has all different salaries(10,20,30)
emp_rate_2 column has all different salaries(20,30,40)
If I do pick up one rate , it works fine as below
select
SUM(emp_rate_1) as emp_rate_1
from employee_t
result $60
but i have to summarize all different rate amount using loop. before looping method,
I tried as simple like below
declare
V_emp_rate_1_ID number;
begin
V_emp_rate_1_ID :=1;
select
SUM(emp_rate_||trim(V_emp_rate_1_ID)) as emp_rate_1
from employee_t ;
end;
I have an error message;
PL/SQL: ORA-00904: "emp_rate_": invalid identifier
ORA-06550: line 5, column 1:
PL/SQL: SQL Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:
how can I put dynamic column into Sum() in the query?
or would you give me your advice to solve the solution.Not clear whether you are trying to get two sums (one for each column) or one sum that totals both columns)
select
SUM(emp_rate_1) as emp_rate_1
from employee_t
result $60But you can do all three with one query
select
SUM(emp_rate_1) as emp_rate_1, sum(emp_rate_2) as emp_rate_2, sum (emp_rate_1 + emp_rate_2) as sum_both
from employee_t
Maybe you are looking for
-
How to make file associations in my java apps
I am making a Graph maker in Java. Just give x = 1,2,3,4,5 and corresponding y = f(x) and get the discreate graph. The graph can then be saved as a file of extention .grf (say) on the hard disk, and can be opened in my graph maker software for editin
-
Centralized purchasing operating unit in drop shipment cycle
Hi all, In multiple operating units, is there a way to use drop shipment cycle with a central Purchasing Operating Unit? I mean creating sales order in OU 1, Importing Purchase Requisition and auto create Purchase Order in OU 2(Central Purchasing OU)
-
An error message came up when updating camera raw 6.7 on my CS5 on windows 8
I Have Lightroom 5.5 and CS5 Photoshop. An error message came up when I tried to update CS5 and Camera raw. Can you assist. [email protected] Regards Peter
-
"Invalid Key" and EKAG20NT.EXE error
After trying to update my computer with an SSD, then returning to the original HDD's, I now get an error that says I have an invalid key. If I click through, it gives me an "Incorrect EKAG20NT.EXE version (internal error, API V2.00)". The program app
-
Win 7 64bit SP1 Install DVD don't work
Hi everyone, i try to install windows 7 64bit + sp1(.iso downloaded from msdnaa) von my new iMac(21.5", Mid 2011). I downloaded the .iso from my windows notebook and copy it to my mac. Then i burn it with the preinstalled mac prog on a dvd. but when