Multi SAP ECC Server Connection to Single SAP Portal

Dear Experts,
We have connected multiple SAP Client of same ECC server to Single SAP Portal and we are able to view data using various standard SAP ESS/MSS Objects.
Is it feasible to connect Multiple SAP ECC Servers to one SAP Portal Server for showing data from varios servers using Standard ESS/MSS Objects.
Any help appreciated.
Rgds
Gulshan

Hi Gulshan,
You are right....these are the JCO names being picked up by standard ESS/MSS applications.
The Standar DCs will be calling these JCO names only while connecting to the SAP Server.
As you described,
The portal do have system alias name as unique name.
You may need to use some customizations.....plz find the below threads...they may be of your help.
[Thread1 - Change the JCO name (RFC_META_DATA) |Change the JCO name (RFC_META_DATA);
[Thread2 - How to change the JCO reference to an existing model|How to change the JCO reference to an existing model;
Good Luck!!!
Biroj Patro.

Similar Messages

Connect the SAP B1 server to the Remote SAP B1 client

hi experts..
i want to know how to connect the SAP B1 server to the Remote SAP B1 client machine.

Hi Raleigh,
The reason why it is slow or hanging, is u need to upgrade the RAM in your Server. we have implemented the same concept and the speed is also good.
But we have done with one Single Server in the Office, which can be accessed both through Local LAN and via internet, for this we had given two IP Address for the Server.
One will be Public Static IP and the other is Local Static IP.
Hi raleigh,
I configured static ip with Nat mode in router.It was connecting from out side and while connecting it was asking Licence server ip,then i have given ip after that it was showing ths error"connection to the Licence server failed (60070-15)".Please help me.

Question regarding SAP ECC Server Value Pack successor

Hello,
currently one of our ERP 6.0 systems is scheduled for an EHP4 upgrade. So we used the SolMan to determine which technical usages are available for the system.
The SolMan presents teh SAP ECC Server Value Pack successor as a possible technical usages which could be implemented during this update. Now our customer does not know what this technical usage could be good for. I already searched within the help.sap.com area for ERP 6.0 but I was not able to dig up any information regarding this technical usage.
Can somebody tell me what they are good for or where to look for specific information?
Thanks in advance.
Kind regards,
Sven

Someone has information about this pack, I don´t find information in any part.

Key functional differences between SAP ECC Version 6.0 and SAP Version 4.6

Hi Forum,
As we are currently updgqrading to SAP ECC Version 6.0 from SAP Version 4.6, could someone please identify what are the new functionalities are being offred in SAP ECC 6.0.
Please let me know or guide me in a right direction - my email address is [email protected] or simply reply to the forum.
Thank you
Yogesh

Dear Yogesh,
Please go through Upgrade info @ service.sap.com.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack.
4.6C supports NONUNICODE.
Hope this would add some more info.
Regards,
Naveen.

No Connection btw JCAPS 5.1.2 and SAP ECC 6.0 whle creatining SAP/Bapi OTD

Hello.
We have the following problem trying to build SAP BAPI/RFC OTD.
1) JCAPS 5.1.2. SAP ECC 6.0. Jco version 2.1.7 (also tried 2.1.8, 2.0.12 with the same result). All steps were done according to SAP BAPI/ALE eWays user guides and readmes
2) SAP client already installed and worked ok on the same host as the JCAPS
3) It looks like the problem is in JCo. It seems like doesn't react when we trying to connect to SAP during creation of BAPI/RFC OTDs at design time.
Error message: partner not reached
ERRNO 10060
All ports are open and no restrictions imposed on JCAPS server. There are no connection log entries on SAP router host.
4)We tried to run sample Project which goes with eway, and the following entries in logical host log file were found:
[#|2007-06-12T11:35:13.171+0600|WARNING|IS5.1.2|STC.eWay.SAP.BAPI.com.stc.connector.sapbapiadapter.sapbapi.SAPConnector|_ThreadID=17; ThreadName=Worker: 5;|SAPConnector.isConnect(): JCO Client is null|#]
[#|2007-06-12T11:35:13.296+0600|INFO|IS5.1.2|STC.eWay.framework.management.com.stc.connector.management.util.Alerter|_ThreadID=17; ThreadName=Worker: 5;|sendAlert(), connection info: ConnectionInfo [ collaboration: cmBAPIOutbound_jcdFlightGetList, project: prjBAPIOutbound, component: eaSAPBAPI, deployment: dpBAPIOutbound, environment: envTest, logicalhost: LogicalHost1, integration server: IntegrationSvr1 ], monitor: ObjectReference [ name: SeeBeyond:GUID={70010000-D247521E130100-AC14015A-01},Name=prjBAPIOutbounddpBAPIOutbound|prjBAPIOutbound|dpBAPIOutbound|cmBAPIOutbound_jcdFlightGetList_eaSAPBAPI ], alert message: No connection established to SAP R/3 for user $$$$$$ on host $$$$$.|#]
[#|2007-06-12T11:35:13.312+0600|WARNING|IS5.1.2|STC.eWay.SAP.BAPI.com.stc.connector.sapbapiadapter.sapbapi.SAPConnector|_ThreadID=17; ThreadName=Worker: 5;|SAPConnector.isConnect(): JCO Client is not connected.|#]
[#|2007-06-12T11:35:34.781+0600|INFO|IS5.1.2|STC.eWay.framework.management.com.stc.connector.management.util.Alerter|_ThreadID=17; ThreadName=Worker: 5;|sendAlert(), connection info: ConnectionInfo [ collaboration: cmBAPIOutbound_jcdFlightGetList, project: prjBAPIOutbound, component: eaSAPBAPI, deployment: dpBAPIOutbound, environment: envTest, logicalhost: LogicalHost1, integration server: IntegrationSvr1 ], monitor: ObjectReference [ name: SeeBeyond:GUID={70010000-D247521E130100-AC14015A-01},Name=prjBAPIOutbounddpBAPIOutbound|prjBAPIOutbound|dpBAPIOutbound|cmBAPIOutbound_jcdFlightGetList_eaSAPBAPI ], alert message: Connection to SAP R/3 failed for user $$$$$$ on host $$$$$$.|#]
[#|2007-06-12T11:35:34.781+0600|SEVERE|IS5.1.2|STC.eWay.SAP.BAPI.com.stc.connector.sapbapiadapter.sapbapi.SAPConnector|_ThreadID=17; ThreadName=Worker: 5;|Unable to initialize SAP R/3 Client Connection|#]
Any help is appreciated

Hi Yermek.
I guess you are placed and set all jars relates to bapi/rfc.
You need to pass atleast one parameter from jcd which will initiates the BAPI connection.
i.e atleast from jcd you need to send a request.
Hope it will work...
Thanks,
M.P.Rao.

Can one syclo server connect to multiple SAP backends?

Hi All,
I am working with SAP Service Manager application and the backend is SAP CRM.
As we all know that the backend system setting for syclo server needs to be maintained in the JavaBE.ini file
Suppose I have a requirement where one of my screen has to deal with a status update development and the backend in this case is ECC and not CRM.
Can I achieve this ? I mean can we configure the JavaBE.ini file to connect the multiple SAP backend ? If yes please explain the process/steps to do so.
Thanks and Regards
Neha Mahanty
Message was edited by: Michael Appleby

Thanks Bill,
As I understand , Going with Standard SAP Integration mechanism means to have connection with CRM system and ECC system can be called internally from CRM via RFC's . Is my understanding correct here ? This can be done If we create a FC in CRM and internally call ECC FC via RFC.
Also I shall try the second approach too. However I have a question here.
Suppose I create a new JavaBE2.ini file and configure it for ECC.
Later when I create java steps will it automatically detect that which SAP system it should connect to? I cannot explicitly tell the Java step to call the ECC system , Can I ?
Please advise.
Thanks
Neha

SAP Content server connectivity

Hi..
SAP Content Server 6.40 on Solaris 10, Apache 1.3. xx installed successfully. i unable to connect from ECC to SAP Content server gives error in error_logs of app ache
Mon Sep 6 14:46:55 2010 error http://client 172.16.20.219 File does not exist: /usr/sap/XXX/apache/htdocs//ContentServer/ContentServer.dll
It really great full, If you can help.
Regards,
Panu

Das..
Yes my apache server installed and able to open and start and stop.
installed path: /USR/SAP/XXX/APACHE
Port :1090
while installtion apache use make and make install command successfully.
Installed SAP Content Server 6.30 on Solaris and can't get pass the CSADMIN First screen that ask the server/port and script. according to installation document it ask for ContentServer/Contentserver.dll but my installation on the Content Server 6.40 didn't exist that script.
Did i installed correctly.
it really helpful if you can help on this.

Difference between SAP ECC IDES 6.0 and SAP NetWeaver?

Hello everyone!
I am a bit confused since I am also new to SAP world, so I would to ask you, we have a SAP IDES ECC 6.0 in our server here to our company, I was trying to see a little of SAPUI5 and in a tutorial a guy was using SAP NetWeaver Visual Composer.
1- But, what's the difference between the SAP IDES ECC 6.0 and SAP NetWeaver?
2- What are the other parts I am missing? Are there any other IDES or such a thing around those terms?
3- How can I get installed SAP NetWeaver?
4- I have also got some info about SAP ERP, SAP CRM, SAP MM, SAP BW.. And those?
5- What are they in term of software/patch/ide/plugin/addon... ?
Please, I really need an overview in order to make all the things clear in my mind,
Thank you!
Denis

Hi Denis,
SAP is a big umbrella where lot of products are developed and made to use in various industry solution like Engineering, Chemical, Retail, Oil & Gas. I used the term Solution to relate SAP application to these solutions.
SAP NW is comprised of following components SAP_BASIS, SAP_ABA, PI_BASIS and SAP_BW. In totality we refer this as NW stack.
SAP application will have underlying database like Oracle, DB2, MSSQL or MaxDB where actual business data is stored.
Please check link Products | SAP to have more insight of SAP products ,services and offerings.
Hope this helps.
Regards,
Deepak Kori

SAP Content Server Connectivity issue

Hi Friends,
We have installed Content server 6.40 on a standalone server after the installation i tried to open below link but its not opening.
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
This content server has to be connected to R3(ECC 6 EHP4 ) hence we went to t codes OAC0 and OACT to create content repository
We have created a content repository as below
Content Rep.    ZDMS
Description     ZDMS
Document Area : DMS document management system
Storage type: 04 HTTP content server
Version no.     0046   Content Server version 4.6
HTTP server     192.168.30.12(where the content server is installed)
Port Number     1090                        SSL Port Number
HTTP Script     ContentServer/ContentServer.dll
Phys. path      D:\usr\sap\FNS\SYS\global\
and when i am checking i am getting below error
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
i have also created a entry in table SDOKPROF
as below but still same issue.
NAME = USEHTTPPLG
VALUE = OFF
and also we have run RSHTTP05 to check if any error but no errors.
Even when we are going in t code CSADMIN we are getting same error
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
In dev_icm belwo error is showing.
** WARNING => Connection request from (2/3/0) to host: xxx.xxx.xx.xx, service: 1090 failed (NIECONN_REFUSED)
[Thr 5352] {000102ca} [icxxconn.c 2271]
Kindly help to solve this issue.
Thanks
Basis

Hi Deepak,
Thanks for your inputes i checked IIS and after the content server installation these website were not created hence i created it manully as per note 1823408 - Manual Creation of Website on Windows 2008 Server
I created SAP_Content_Server by following first 3 steps but after that 4 , 5 and 6 steps are not clear i dont see those option in ISS manger.
1. Go to Internet Information Services Manager from Start Menu >> Admintrative tools >> IIS manager
a) or Start Menu >> Run >> "Inetmgr"
2. Right Click on Sites >> "Add Website" to create a new Website.
a) Site name <Name of the webiste>
b) port <Port No>
c) Physical Path <path of the Content Server installation directory>
d) Application Pool >> Select "DefaultAppPool"
e) Click "OK"
f) Website will be created.
3. Right click on the newly created website >> "Add Application"
a) Alias "ContentServer"
b) Application Pool >> Select "AppPool_ContentServer"
c) Physical Path <path of the Content Server installation directory>
d) Click "OK"
Content Server Application will be created.
4. Double Click on the website >> Handler Mappings
a) Select "ISAPI.dll" from the list >> Edit Feature Permissions
b) Check the tick boxes for "Script" and "Execute"
c) Click "OK"
5. Double Click on the website >> Handler Mappings
a) Enable "Anonymous Authentication"
b) Enable "Basic Authentication"
c) Enable "Windows Authentication"
6. Double Click on the IIS Server name >> ISAPI and CGI Restrictions >> Click on "Add"
a) ISAPI or CGI Path <path of the Content Server installation directory,selecting "ContentServer.dll" >
b) Description "ContentServer.dll"
c) Check the tick box "Allow extension path to execute"
d) Click "OK"

Difference Between SAP ECC. 6.0 and SAP SCM 5.0

Hi Gurus, pls answer the questions below
1) What is the Difference between ECC and SCM
2)Is it mandatory having ECC if i have SCM
3)What are functionality availble in SCM when compares to ECC.
4)SAP-IS Retail is a Part of ECC or SCM
thanks
Satish

Dear Satish,
1) ECC is the SAP ERP Central Component and you can connect to this the SCM system (Supply Chain Management).
2) yes it mandatory to have at least one ECC if you have SCM
3) There are several functionalities availble in SCM when compares to ECC. Please read http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
and
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
for application help and for available functionalities.
4) Regarding IS Retail please read note 157755. Here you will find your answer how can you instantiate your R/3 system as a Retail system (SAP Retail).
I hope this helps.
Regards,
Tibor

Login to multiple SAP systems using pwd of single SAP system

Hi All,
We have 3 different SAP servers, with sids: ECD, BWD, HRD.
for each user, a user with the same username is created in all three systems.
the user does not want to maintain 3 different passwords, instead only single password to be used in all systems. i.e. when he changes the password in system ECD, the changed password should work in other systems BWD and HRD as well.
if we were using SAP EP, we checked the possiblity of username based SSO and having portal login using only on system ECD.
but we are not using the portal, and all the users will access 3 sap systems using SAPGUI.
is there any way, where one system's password will work to login to other systems.
thanks in advance,
Madhu_1980

Hi Tim,
You're right about the fixed client for the MYSAPSSO2-ticket-issuing system. In the case for Java, the "client" is specified inthe UME parameter login.ticket_client. And the trusting ABAP system will have to add the Java system + "client" into its ACL (in addition to the certificate). This "client" will only play a role in that "trust" relationship.
As for launching the actual transaction via SSO, this is how it works.
SAPGUI transaction will be launched by a thing called Portal transaction iview. That iview will have a parameter called the System Object. The System Object will determine which ABAP system-client it will connect and logon on to. So if you want to logon to multiple clients, then create one System Object for each of the system-client combination, and then create transaction iviews to each of the corresponding system object. The iviews will be presented to the user which then allows the user to launch the transaction iview (specificy SAPGUI link in the iview property)
https://help.sap.com/saphelp_nw74/helpdata/en/4e/1262711e3d2287e10000000a15822b/content.htm
I hope I understood your questions.
Cheers
Donald

Connect SAP B1 server to Remote Client

hi experts..
i want to know how to connect the SAP B1 server to the Remote SAP B1 client machine.

hi Edward..
thanks for reply me..
yes..i want to acces my SBO server in the remote SBO client, without using citrix Presentation server , VPN or leased line.I am having Static Public IP,with the help of this is it possible to make a setup.And what r the changes i can do in the server and the client side.give me some example configuration setup to create a connection in server and client side.

"An IdocException occurred" while posting Idocs from SAP ECC to SAP PI AEX

Hi all,
While sending Idocs from SAP ECC to SAP PI 7.4 AEX, we are experiencing this issue at SAP ECC-SM58
Only a particular Idoc type is having this issue.
Below are the checks done before posting this query:
1. Pushed other Idocs from the SAP ECC to PI and all were getting exchanged successfully.
2. Reloaded the meta data in PI for the particular Idoc type in issue.
3. Checked the RFC destinations in SAP ECC, RFC connection test is also working fine.
4. Unicode option enabled in the SAP ECC RFC destination pointing to PI-AEX
5. Restarted the inboundRA service in PI AEX.
Is there anything still missing. What could be root cause of this issue.
If anyone has encountered it before, pleases share the resolution.
Thank you
Younus

Hi Amit,
Thanks for the reply. Log viewer doesn't provide much help on the error.
The error desc says
"JRA]serverExceptionOccurred. Server XI_IDOC_DEFAULT_SID, Managed_Application_Thread_58, connectionId=5-ip address|sapgw20|XI_IDOC_DEFAULT_SID, Exception: com.sap.conn.jco.JCoException: (104) JCO_ERROR_SYSTEM_FAILURE: An IDocException occurred"
regards,
Younus

Patch needed for uploading sap ecc 6.0 country india version

Hello experts,We are facing problems whileworking with the cin module,First of all i would like to convey that our server is based at jakarta and that the license is based at jakarta(indonasia),however the off shore delivery centre is based at india,so please guide us like what patches are needed to be uploaded so that we can operate the cin version.
Functional error----- The error or problem been faced by the functional consultants is that while entering the FTXP tranction the respective fields are always in the display mode and not allowing to enter any data(only single session been opened and not the case of multiple session in the same tranction),
pls guide,thanks in advance,
Anshuman.

Thanks guys for your replies.
Uday,
Is there any Authorization object that will let me download ECC IDES?. I dont see any such object ( named ECC or similar) assigned to my SID in Serv Mkt Place.
Could that be the reason?. Pls advise.
JD
>
uday kumar wrote:
> Hi
>
>
All corrective software packages, for SAP NetWeaver 7.0 and SAP Business Suite 2005 and beyond that are delivered after April 2nd, 2007 will ONLY be available via SAP Solution Manager's Maintenance Optimizer. Find more details here
> Its applies for only support packs and SP stacks you can download Software packaged irrespective of solution mangaer directly
>
>
Sorry if its a repeat question. I need ur help. I was trying to download SAP ECC 6.0 IDES from SAP service market place. I identified all the files needed for ECC 6.0 IDES version installation, added them to download basket, though they wont show up there
> R u sure that you have added them to download basket,do you have proper authorization to download them to download manager,cross check the setting of download manager and your S userid and password.
>
>
I have Serv Mkt place ID and is there anything else that I need to install first to be able to download IDES files?.
> Did you configure downlaod manager at your desktop or forntend server?
>
> Regards
> Uday

Error while starting SAP Content server

Hi Experts,
I have installed content server, and from OAC0 i have imported certificate. The status is showing running. In details tab, when i enter on start button, I am getting below error.
HTTP error: 500 (Internal Server Error) "CreateTab ContentStorage, connect error SQLConnect failed, [SAP AG][SDBODBC DLL][SAP MaxDB] Commun
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
"CreateTab ContentStorage, connect error SQLConnect failed, [SAP AG][SDBODBC DLL][SAP MaxDB] Commun
Can any one suggest possible solution?
Regards
Aditya

Hi Aditya
Could you refer the SAP Notes
1764842 - Connection problem to SAP Content Server
582765 - SAP Content Server cannot address database
Br
SS

Multi SAP ECC Server Connection to Single SAP Portal

Similar Messages

Maybe you are looking for