Multi-select prompt values on BI EE dashboard.
Hello,
I have a question about to multi-select prompt. I need to show values of multi-select prompt on the dashboard, because end-users want to see values of the prompt. Please, look at attached screen shot.
Regards, Vladimir.
Link prompt
Thanks for your reply, because my colleague gave the same advice this morning and this decision works pretty nice.
The main point is to show which values stored in multi-select prompt for end-user on the dashboard.
If you have other ideas about this issue I will be very curious to know.
Regards, Vladimir.
Similar Messages
-
How to Select More then 1000 values in Multi-Select prompt!!!
Hello Users,
I have Scenario where i have to pass all the values from prompt to report and the values in the prompt are coming from session variable, so whatever value access user has the report will run with that only...
Now the question is that Multi-Select Prompt is not able to take more then certain values, so is there any way that we can increase the limit for selected values??
in-short how to increase the limit for selected values in multi-select prompt??
Thanks In Advance!!!Hey David,
The Scenario is like, we have data level security on "Unit" attribute. now based on the user selection when user logs in he should able to see the report only for those units which he/she has access.
in total we have 1800 units available, now for 5-10 units access is fine, but the question will arise when user will not have only some units access from 1800 units.
because report will not take those values from the multi-select prompt reason is that multi-select prompt is not able to take more then certain values in selected side.
now in multi-select until-unless u have data coming in selected side those values will not pass. so i have kept the sql in default for that prompt.
so when user logs in he will able to see those values in selected side for the multi-select prompt, but when values increase from some level it's going automatically in un-selected side.
i want everything on selected side of multi-select prompt.
Let me know if you need any further details. -
Multi-select prompt for BI Publisher SQL report in Dashboard?
Is there any way to populate a presentation variable from a multi-select dashboard prompt?
I have a BIP report using a SQL data source, and it will be presented on an OBIEE dashboard. Since the only apparent method for prompting a SQL BIP report from a dashboard prompt is to use presentation variables, and it appears that you can only set presentation variables using non-multi-select controls, it looks like there's no way to do this.
Any ideas?Thanks for the response Fabiano.
I tried using BI Answers to feed this report but it ended up being too cumbersome because of the number of queries and the awkward XML data names generated on calculated fields. Those were the main reasons for SQL data sources. I was able to cut the report from 10 queries down to 2, and assign meaningful XML data names. The report runs much faster and works very well. I am using bind variables, but the only way to populate them (apparently) is to use presentation varibles, which are not populated on a multi-select prompt. -
Multi select prompt defaulting to only 256 values
Hello All,
The requirement we have is to have the prompt defaulted it to be picking all the values in the prompt. The prompt has about 700 values. But it's only defaulting to 256 values. Is there a way to increase this. I am on obiee 11.1.1.6.10.
I have tried using the <MaxDropDownValues>256</MaxDropDownValues> in instanceconfig.xml. but that's off now use. Is there a seperate parameter that would control the values in multi select prompt?
Kindly help out.
Regards,
DeepHello Deep,
Check this
Srinivasan Software Solutions Pvt.Ltd.: [OBIEE 11g] Customizing Prompts 'ALL Column Values' To Custom Value
Thanks,
Sasi Nagireddy.. -
Multi-Select Prompt to the Report
Hi,
How to pass value(s) chosen in a Multi-Select Prompt to the Report?
Is Prompted will pass the values but My requirement is to exclude those values in the Report.
I think we can not use of Presentation Variable in this scenario..
How can I do it?
Thanks,
VencyHi..
okay.. have you think of guided navigation in this case...
I am not sure.. that it really helps... but just one approach...
If it works.. then okay.. just think in that way...
This may helpful to you in understanding of guided navigation...
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-selecting-reports-from-dashboard-prompts-and-guided-navigation-sections/
Thanks & Regards
Kishore Guggilla -
Combo Prompt Design (with Drop down and Multi-select prompts)
Hi folks,
I have the following prompt design requirement in OBIEE dashboard:
PromptA: should be a drop-down prompt
PromptB: should be a multi-select prompt
PromptB should list the values contained in either of two dimensions (lets say: Product Names and Product Group Names ). Lets define Product Names to be the names of individual products, while the Product Group Names is the names of a predefined collection of certain products.
The string values that should appear in the PromptA then are: Product Names and Product Group Names. Consequent to the selection made in PromptA, values from one of these two dimensions should be dynamically displayed in PromptB. That is, if Product Names is selected from PromptA, then all product names from the Product Names dimension should be listed in PromptB. And if Product Group Names is selected from PromptA, then all product group names from the Product Group Names dimension should be listed in PromptB.
Can anyone tell me how do I relate the above two prompts and have my reports to work accordingly?
regards,
Mahendra
Edited by: Mahendra Varman on Jan 7, 2009 12:11 PM
Edited by: Mahendra Varman on Jan 7, 2009 12:21 PMHi
For this you have to do two dashboard prompt
In promptA:
select one dummy column,
In control dropdown list select dropdown
In show dropdown list select SQL Results
In sql results write the following query
Select case when 1=0 then tabelname.column else 'Tablename.ProductNames' end from subjectarea name
Union all
Select case when 1=0 then tablename.column else 'Tablename.ProductGroupName' end from subject are name
In set variable ->set presentation variable called var1
Saved it as PromptA
In PromptB:
Select one dummy column in that column forumla write @{var1}
but problem with this approach it shows two Go buttons for two prompts to avoide this create custom Go button
for creating custom Go button see this link
http://obiee101.blogspot.com/2008/11/obiee-how-to-replace-multiple-go-button.html
Try this its not work let me know
i tried for another solution
Regards
Naresh -
Multi-select prompts in Direct Database Request
Is it possible to pass multi-select dashboard prompts to direct database requests?
I have a report based on direct database request that needs the ability to run for all customers or the selected combination of customers.
For example:
select customer_name, sum(quantity)
from orders
where customer_name = '@{pCustomerPrompt}'
group by customer_name;
Here pCustomerPrompt is a multi-select prompt for customers.
Thanks,
AravindI am not sure exactly whether it could be possible..
One info I can share you is: we cannot assign a Presentation Variable to a Multi-Select prompt... -
Multi-select prompt and variable
Hello!
I have a table function (which is my data source) that has a number of input parameters and the problem is with multi-select prompt because it doesn't support setting a value in a variable (OBIEE 10.1.3.4.1.). Can I somehow get a list of selected items from multi-select prompt and pass it as one string (value) to my request variable? Or maybe you have any other idea?
I've searched old posts but I couldn't find solution to my problem regarding this issue.
Tnx a lot!Hi,
This post will solve your problem;
http://www.rittmanmead.com/2009/11/oracle-bi-ee-10-1-3-4-1-multi-select-prompts-string-aggregation/
Good Luck,
Daan Bakboord
httP://obibb.wordpress.com -
Multi-Select Prompt default prompt should display 'All Choices'
If a multi-select prompt doesn't have a value, it shows as blank, which
technically means "%" ie. all values. Is it possible to display the text 'All Choices' so that users understand that the reports are based on all values of that blank prompt field.
Please suggest,
Thanks.If we enter the text 'All Choices' as the default to in the prompt then this value is checked against the other values for this column in the table. Eg: - If we want Name to be the multi-select prompt. There is no match for 'All Choices' in the database table and the report does not return any rows. We need a functionality similar to the one available for drop-down list control. For drop-down control OBIEE by default offers the option 'All Choices' which in the query is used as %. In drop down we can only select one name at a time or All. The user needs to have the flexibility to either select multiple names or select an option All Choices which will return all results.
Any suggestions on this.
Thanks. -
In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?
Nic, for me the iTunes window looks like this, when I connect my iPad 3:
I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
Click the "Apps" tab in the "Devices" pane.
Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
Then do I click "GarageBand" to select the documents in the right panel.
Which part is different for you? Perhaps you could post a screenshot?
Regards
Léonie -
Multi Select Prompt in BI Publisher
Hi All,
Is it possible to create a multi select Prompt in OBIP which is similar to OBIEE multi select prompt?
Default multi select prompt given in OBIP is not user friendly. By any means If any one has created much user friendly multi select prompt please let me know how to do that?
Thanks & Regards,
SanxHi Sanx
Its what is there today. I believe that multi select will be available via the look up type prompt in the future but for now its what you see is what you get :0(
Tim -
Multi select prompt not defaulting
Hi,
I have a multi select prompt in the report which I have defaulted using the SQL query. Even then
the prompt is not getting defaulted. Anyone knows what can be done.
ThanksHi User,
Check ur sql again.If its fine then clear the cache of the browser and try it again.
Thanks
Diney -
How to dipsplay value of multi select prompt in Answers
I have a request in Answers that has a multi select column prompt. I can display the value selected in the prompt in the Narative view as long as only one value is selected. When more than one value is selected, how can I display the multiple values selected in the Narative view?
Thanks in advance.
SandeepMulti select can not be assigned to Presentation variable (It is greyed out), so you can not get the respective values.
-
Prompt value based on another prompt(Multi Select prompt)
Hi Expert,
I have two multiselect prompt Continent and conutry
my req is when I select continent in the first prompt then second prompt sholud show the country based on first prompt value.
Ex : If I select Asia in continet then country prompt sholud show only Asia's country.
any sugeestion pls.
i know constraint but only possible in drop down prompt..Hi,
Constrain is not applicable for edit box only.We can use it for drop down list and multi select also.Other wise go for the presentation variable.
mark if helpful/correct...
thanks,
prassu -
Multi-Select prompt for Calendar Year range of values
Hi All,
I three prompts and one of them is a Multi-Select i.e Calendar_Year as i the user can select a range of years or random years like 2005,2008,2007 or 2005-2007. What do i need to do in the report so that the report(pivot table) can display the data accordingly. Presentation Variable is not possible as the option goes off when i select the multi-select, i using Guided Navigation in my report.
Thanks in Advance for the helpWhere did you enter this code?SQL Results
You mean Default to/SQL Results? YES
Could you post your NQQuery.log (just filter)? -
RqList
S&OM - CUSTOMER MASTER.CUSTOMER_NAME as c1 GB,
SALES DATA:[DAggr(CIC.SALES DATA by [ S&OM - CUSTOMER MASTER.CUSTOMER_NAME, S&OM - CUSTOMER MASTER.FRDW_CUSTOMER_NUMBER, CIC.CUSTOMER_NUMBER, CIC.CIC_LOV as c2 GB,
CIC.CUSTOMER_NUMBER as c3 GB,
left(cast(CIC.CALENDAR_YEAR as CHARACTER ( 30 )) , 4) as c4 GB,
CIC.CIC_LOV as c5 GB,
S&OM - CUSTOMER MASTER.FRDW_CUSTOMER_NUMBER as c6 GB
DetailFilter: topN(SALES DATA:[DAggr(CIC.SALES DATA by [ S&OM - CUSTOMER MASTER.CUSTOMER_NAME, S&OM - CUSTOMER MASTER.FRDW_CUSTOMER_NUMBER, CIC.CUSTOMER_NUMBER, CIC.CIC_LOV , 10 at_distinct [ S&OM - CUSTOMER MASTER.CUSTOMER_NAME, S&OM - CUSTOMER MASTER.FRDW_CUSTOMER_NUMBER, CIC.CUSTOMER_NUMBER, CIC.CIC_LOV ) <= 10 and left(cast(CIC.CALENDAR_YEAR as CHARACTER ( 30 )) , 4) >= '2009'
OrderBy: c2 desc
Thanx
Maybe you are looking for
-
Problem in starting Application with Weblogic Server
Hi friends, I am using weblogic server 4.5.1.7. After I logged in my program, I got an error message as follows. I checked my classpath, I did have "RemoteClientImp_Stub.class" in my server side jar file. I appreciate your help: Could not authenticat
-
Regd : Integration Between Portal Layer And Process Layer
Hi Experts, I have a query regarding the integration between Portal layer and the process layer in CE. How does the interaction happens or what is the process behind the integration of these two layers. I was going through some help documents at h
-
Best solution for bringing new systems up to date with software updates
I have read that I can create a non-deployed software update group that contains previous months patches and use that for reporting purposes to find out which systems do not have all the updates, but that is where my understanding falls short. For s
-
Premiere Elements Blu-Ray Burn Fatal Error
How can I make my Premiere Elements 8 burn a Blu-Ray H.264 1920x1080 project without stopping (not crashing) with a "fatal error"(encoding media ~97% > burning disc 0% > fatal error; Adobe Media Encoder – Property Data Invalid") after 13 hours? I am
-
i am using bada2.0 OS on my samsung wave and use firefox on my PC....its(firefox) greatly designed and made according to needs...wish could have a version for my phone... as firefox has launched version for android.this not a big task for firefox to