Multi-Server Monitor log outs repeatedly

I recently installed ColdFusion Enterprise 10 and set up 3 instances on the same server and then set up multi server monitoring for my three instances. The problem is logging into one CF admin on one port logs you out of the other. This appears to be affecting the multiserver monitor as well making it utterly useless. From the overview dashboard you can see the servers logging in and out repeatedly. Is this is a bug or is there something obvious here I'm missing?

Similar Messages

Exchange Server 2013 Logs Out of Control

I have a fairly new install of Exchange Server 2013 running in full production. Everything has been great except for the high level of log files that are generated on a daily basis. I am able to truncate the Transaction logs everyday with a Server Backup,
but that still does not help me with the other constantly growing log files in C:\Program Files\Microsoft\Exchange Server\V15\Logging. Is there any way to set these to automatically purge after a set amount of days? I have found resources that discuss setting
up a powershell script that will delete everything after a set amount of days, but I want to know if anything in Exchange 2013 will allow me to do this. I am getting tired of expanding my VM disk. Any help would be greatly appreciated.

Unfortunately Exchange 2013 creates alot of log files that it does not clean up on it's own. While there isn't a way to tell Exchange to clean up the files after X number of days, there is a very helpful script someone else has already written that does
the work for you. He has 2 versions, 1 that you have to put on each individual server (I like that one in case I lose the server I put the script on) or 1 that you can run on 1 server that takes care of all of your Exchange Servers.
http://www.c7solutions.com/2013/04/removing-old-exchange-2013-log-files-html
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

IPhone email stays logged into pop3 server, never logging out

I have an iPhone 4 with the latest firmware/software.
My email provider is SureWest. They have a pop3 server I use to retrieve my email from their server. This works fine.
I also use Outlook Express on my Windows machine at home to download this same email.
I have the iPhone set to check for new email every 15 minutes. It leaves a copy on the pop3 server, so I can download the same emails when I get to my home computer.
The problem is that the iPhone appears to stay "logged in" to the pop3 server, so when I get home, and try to check my email, I get an error message from SureWest, saying that I am already logged in. But I'm not!
To solve the problem, I have to power off my iPhone, wait a minute or two, then check my email from the home computer.
Seems silly that the iPhone just stays "logged in" to the pop3 server.
Any fixes/updates for this problem?

I have an iPhone 4 with the latest firmware/software.
My email provider is SureWest. They have a pop3 server I use to retrieve my email from their server. This works fine.
I also use Outlook Express on my Windows machine at home to download this same email.
I have the iPhone set to check for new email every 15 minutes. It leaves a copy on the pop3 server, so I can download the same emails when I get to my home computer.
The problem is that the iPhone appears to stay "logged in" to the pop3 server, so when I get home, and try to check my email, I get an error message from SureWest, saying that I am already logged in. But I'm not!
To solve the problem, I have to power off my iPhone, wait a minute or two, then check my email from the home computer.
Seems silly that the iPhone just stays "logged in" to the pop3 server.
Any fixes/updates for this problem?

Keep getting logged out repeatedly

Not seeing 9: invalid cookie supplied Unknown status code: 9
Firefox 4. Is this happening to anyone else?

Logged in with FF Aurora 5.0a2 at 21:48:37.
Started this post at 21:49:50, then decided to watch the Dallas - OKC game for a little while until dinner was served (pan-broiled pork chops, endive salad with toasted pecans, Danish bleu cheese and pear in a coriander vinaigrette); walked my dog, had a smoke on the stoop with the pooch while playing a game of solitaire on my iPhone (won), then came back here at 23:13:41 to see what happens (copying my post to the clipboard before pressing Add Reply)...
And:

MacBook Pro logs out repeatedly on its own at startup

Hopefully this question is posted in the appropriate location.
When I start my MacBook Pro, I am asked to insert my password and login.
Upon entering my password, the computer will display the desktop, and applications will begin to open. About 10 seconds after, the computer will log me out, and ask me to sign in again. It does this at least 5 times. After restarting the computer, it will let me in.
I called Apple for support, but the associate said that she has never heard of a problem like this before.
Any troubleshooting ideas?

have you checked for statup items?
if you can login.
apple menu,
system preferences,
Users,
click on the user account from the left hand list
click on the login items tab
if you have applications in that list; they could be causing the issue. (crashing the computer and dumping you back to the login window) try removing any thing in the list. See if it helps.

Server 2012-logging out idle users after x time

Hi Guys,
I cant seem to find anything that's working for this & my boss is riding me for this.
I need to set up a rule in Win Server 2012 R2 that will logout users who are Idle for 30 mins, I cant get it through GPO so hoping for any solutions? its been 2 days, please help?

> I need to set up a rule in Win Server 2012 R2 that will logout users who
> are Idle for 30 mins, I cant get it through GPO so hoping for any
> solutions? its been 2 days, please help?
RDS or local logon?
If RDS: Check what you see in Computer Configuration\Administrative
Templates\Windows Components\Remote Desktop Services\Remote Desktop
Session Host\Session Time Limits\
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Logging out of itunes?

My uncle wanted me to log into his itunes account on my laptop so I went to itunes store and logged out of my account and into his, but when I went back to music, it was still my music! Does anyone know why this is or if you can even log out of that part of itunes completely? If you can, how, because I can't figure it out.

Log in, log out, repeat 50 billion times.
It will never have an affect on the media that exists on the computer.
What are you really trying to accomplish?

How can I log out of webdav?

I am trying to test some webdav - site studio content.
Every time I open webdav I am always logged in as the same person.
I tried rebooting. Maybe server restart logs out, but I don't want to restart the server.
Does anyone know how to log out; or how to force a login prompt?

I placed a SR with Oracle. so no need to duplicate effort. But below are my responses to your post:
UCM: 10.1.4.0.0
OS: 2.6.18-92 GNU Linux
UCM security - not LDAP
Is there WNA or SSO configured? No WNA - I don't know what SSO is.
What I mean is that when I log in to the network I log in as kgough. And when I log in to UCM I log in as kgough (same name, different password).
And when I went to a test user I found someone who's user name has no corresponding UCM account, and she has never connected to UCM before. In fact nobody has ever connected to UCM on this computer.
She logs in with test credentials I gave her "PropCost_1". She was prompted twice on the second prompt she chose "remember my password"
Then she is viewing folders authored by kgough that PropCost_1 has no read access to. When she pastes a file in one of the folders it shows up in UCM with author "kgough"!
Do you mean go to IE and disable "Integrated Windows Authentication"? Done, and still pasted content shows up as author=kgough

What is a "logged in user" on the "Active Sessions" report in CF8 Server Monitor?

I was looking at the Active Sessions Report (The Chart View) and saw I have more "logged in users" than "active sessions".
I had expected them to be nearly the same.    It's on our Intranet where I log users in (using cflogin and cfloginuser) at the begining of their session and users should be logged when the session ends.
I couldn't find a detailed explaination of what a "logged in user" means.   There is a chance that the same user is logged into a nested application as well as the Intranet, but I don't think that is what I'm seeing.
I also don't see a way to get a list of what CF is counting as a logged in user. I can only see a way to get the total count.
Any help is appreciated.
Thanks,
Jeff

Thank you Michael for the reply, but I don't think that is the issue.
When a user opens their browser on the intranet, a session begins and they are logged in (using the cflogin and cfloginuser).    If they close their browser, the session should hang around for 20 min. (per the server setting).   I am assuming this is still considered an "Active Session" since I can see this behavior in the report.
At first, the Active Sessions and Logged In Users are exactly the same.   When the sessions start to time out, the active sessions are reduced, but the Logged In Users remain the same.    Then, after a while, they start to move together. So I have more Logged In Users than Active Sessions.
I left the Server Monitor open last night and for most of the night, I had 0 sessions, but 57 "logged in users".   This morning, as people opened their browsers, the Active Sessions and Logged In Users moved together.   The gap of 57 looks consistent.
It looks like people are remaining logged in after their session ended.
I am really looking for a detailed explaination of "active session" and/or "logged in user" as used in the server monitor. It would be really nice to find a way to list the details about each item counted in the "logged in user" and not just the total count.
Thanks Again for your reply.
jsm

GRC AC 5.3 Logging strategy in multi server nodes

Hello Experts,
We have GRC AC 5.3 SP6 and 5.2 10 landscapes and PRD system are running with multiple server nodes. SAP recomends to use SAP Logger instead of Java Logger in multi server environment, but i am not able to find out complete documentation on this.
Can someone please give pointers on configuring GRC logging in NWA - which all Categories needs to be defined,etc,etc.
And after this configuration, will we be able to see the logs of scheduled jobs with same details as shown in GRC --> Background Job -> View Logs.
Thanks
Davinder

Hello Harleen,
Thanks for your time. Here are my observations
1. When we have created categories and then deinfed Logging and Tracing (with Severity level ALL) in NWA - these entries have also been reflected in Visual Administrator -> Log Configuration.
2. We will have to restart SAP system after changing logging strategy from Java Logger to SAP Logger.
3. After this change and restart, only upcoming new jobs scheduled/run will be displayed in NWA, jobs ran in the past will never be displayed in NWA.
Severe Problems faced when checking logs through NWA:
1. Logs through NWA are not at all readble as one entry is displayed in one row, whereas checking logs in RAR - VIew Logs was very convenient (similar to reading a text file).
Is it possible to customize the display format of log files in NWA to something like text files,etc?
2. When we try to donwload the logs from NWA, server produces huge dumps files of size in GBs (hpfa files which are memory dumps) - and before this download is completed - server crashes after around 15 minutes of starting log downloads - no free space availbale as everything has been taken by these memroy dumps (around 7GB).
Any further pointers on handling GRC AC logs (multiple server nodes) in NWA would be highly appreciated.
Thanks
Davinder

Data Services Admin Console "Read Timed Out" via Job Monitor Log Tab.

Hi All,
I am getting the "Read Timed Out" via Job Monitor Log Tab issue, when large ETL jobs are being executed.
Is there a resolution for this issue.
Thank you
Kind regards
Hai.

Hi Manoj,
I have checked the UNIX server and the admin.xml is not located in advised location.
The only two file that are in the advised location are:
- ContentTypes.xml
- PythonAPI.xml
I have another install of data service (default installation) on a windows environment, and I checked the advised location and the file is there.
Is it possible to copy the windows admin.xml to the Unix server.
Thanks
Kind regards
Hai.

Server Monitor and servermgr_xserve retain count in system.log

We've got 4 Xserves G5s on 10.5.4 all exhibiting this behavior. As soon as we open Server Monitor, we get this message in the log files repeatedly:
Jul 3 10:28:46 krusty servermgrd[55]: --Module servermgr_xserve's response has retain count of 1.
Jul 3 10:29:16: --- last message repeated 2 times ---
It doesn't seem to have any impact on the performance or the server stability so I just ignore it, but I don't want to miss something important if it gets lost in all of these seemingly unimportant messages. Has anyone seen similar behavior and know of a way to stop this logging (short of closing Server Monitor)?

Did you set up this Xserve as it came from Apple, or did you take an existing 10.5.x image and lay it onto the Xserve? The latter may not have the relevant components in the image... hwmond is an Xserve-only component.

Monitor not showing the whole screen when I log out of Xorg/Openbox

Please help, what happens is..
I log into arch, it boots fine (it displays the loading of daemons in like arabic or something but that's another matter!), I can see everything, I 'startx' into Openbox and that's all fine but when I log out of X it cuts off the bottom of my screen.
I've got a widescreen 1680x1080 monitor and an Nvidia GeForce 8400 GS graphics card and I've tried using nvidia and nouveau drivers.
It only started AFTER i'd installed Xorg, I'd just log into x then kill it and i'd have half my screen missing.
I've tried setting nvidia-settings and editing the conf files in Xorg but it must be an issue outside of X surely, as It's always fine in openbox?
any ideas?
Thanks.
EDIT: I did try searching but to no avail - if there's a topic on this i'm very sorry =/
Last edited by teatreetea (2011-01-12 15:28:07)

I don't know how to do the nested scroll thing I'm sorry
/var/log/Xorg.0.log
[ 3557.788] (II) Loading extension DOUBLE-BUFFER
[ 3557.788] (II) LoadModule: "record"
[ 3557.788] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 3557.788] (II) Module record: vendor="X.Org Foundation"
[ 3557.788] compiled for 1.9.2, module version = 1.13.0
[ 3557.788] Module class: X.Org Server Extension
[ 3557.788] ABI class: X.Org Server Extension, version 4.0
[ 3557.788] (II) Loading extension RECORD
[ 3557.788] (II) LoadModule: "extmod"
[ 3557.788] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 3557.788] (II) Module extmod: vendor="X.Org Foundation"
[ 3557.788] compiled for 1.9.2, module version = 1.0.0
[ 3557.788] Module class: X.Org Server Extension
[ 3557.788] ABI class: X.Org Server Extension, version 4.0
[ 3557.788] (II) Loading extension MIT-SCREEN-SAVER
[ 3557.788] (II) Loading extension XFree86-VidModeExtension
[ 3557.788] (II) Loading extension XFree86-DGA
[ 3557.788] (II) Loading extension DPMS
[ 3557.788] (II) Loading extension XVideo
[ 3557.788] (II) Loading extension XVideo-MotionCompensation
[ 3557.788] (II) Loading extension X-Resource
[ 3557.788] (II) LoadModule: "glx"
[ 3557.789] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3557.799] (II) Module glx: vendor="NVIDIA Corporation"
[ 3557.799] compiled for 4.0.2, module version = 1.0.0
[ 3557.799] Module class: X.Org Server Extension
[ 3557.799] (II) NVIDIA GLX Module 260.19.29 Wed Dec 8 12:24:30 PST 2010
[ 3557.799] (II) Loading extension GLX
[ 3557.799] (II) LoadModule: "dri"
[ 3557.799] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 3557.800] (II) Module dri: vendor="X.Org Foundation"
[ 3557.800] compiled for 1.9.2, module version = 1.0.0
[ 3557.800] ABI class: X.Org Server Extension, version 4.0
[ 3557.800] (II) Loading extension XFree86-DRI
[ 3557.800] (II) LoadModule: "dri2"
[ 3557.800] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 3557.800] (II) Module dri2: vendor="X.Org Foundation"
[ 3557.800] compiled for 1.9.2, module version = 1.2.0
[ 3557.800] ABI class: X.Org Server Extension, version 4.0
[ 3557.800] (II) Loading extension DRI2
[ 3557.800] (II) LoadModule: "nvidia"
[ 3557.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 3557.801] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 3557.801] compiled for 4.0.2, module version = 1.0.0
[ 3557.801] Module class: X.Org Video Driver
[ 3558.216] (II) NVIDIA dlloader X Driver 260.19.29 Wed Dec 8 12:10:14 PST 2010
[ 3558.216] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 3558.216] (--) using VT number 8
[ 3558.220] (II) Loading sub module "fb"
[ 3558.220] (II) LoadModule: "fb"
[ 3558.220] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3558.221] (II) Module fb: vendor="X.Org Foundation"
[ 3558.221] compiled for 1.9.2, module version = 1.0.0
[ 3558.221] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3558.221] (II) Loading sub module "wfb"
[ 3558.221] (II) LoadModule: "wfb"
[ 3558.221] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 3558.221] (II) Module wfb: vendor="X.Org Foundation"
[ 3558.221] compiled for 1.9.2, module version = 1.0.0
[ 3558.221] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3558.221] (II) Loading sub module "ramdac"
[ 3558.221] (II) LoadModule: "ramdac"
[ 3558.221] (II) Module "ramdac" already built-in
[ 3558.221] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 3558.221] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 3558.221] (==) NVIDIA(0): RGB weight 888
[ 3558.221] (==) NVIDIA(0): Default visual is TrueColor
[ 3558.221] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3558.221] (**) NVIDIA(0): Enabling RENDER acceleration
[ 3558.222] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 3558.222] (II) NVIDIA(0): enabled.
[ 3559.086] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G98) at PCI:1:0:0 (GPU-0)
[ 3559.086] (--) NVIDIA(0): Memory: 524288 kBytes
[ 3559.086] (--) NVIDIA(0): VideoBIOS: 62.98.71.00.52
[ 3559.086] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 3559.086] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 3559.086] (--) NVIDIA(0): Connected display device(s) on GeForce 8400 GS at PCI:1:0:0
[ 3559.086] (--) NVIDIA(0): NTS MBW-SERIAL (CRT-1)
[ 3559.086] (--) NVIDIA(0): NTS MBW-SERIAL (CRT-1): 400.0 MHz maximum pixel clock
[ 3559.136] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 3559.136] (==) NVIDIA(0):
[ 3559.136] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 3559.136] (==) NVIDIA(0): will be used as the requested mode.
[ 3559.136] (==) NVIDIA(0):
[ 3559.136] (II) NVIDIA(0): Validated modes:
[ 3559.136] (II) NVIDIA(0): "nvidia-auto-select"
[ 3559.136] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 3559.172] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 3559.172] (--) NVIDIA(0): option
[ 3559.172] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 3559.172] (--) Depth 24 pixmap format is 32 bpp
[ 3559.172] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 3559.174] (II) NVIDIA(0): Initialized GPU GART.
[ 3559.182] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 3559.182] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 3559.182] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 3559.182] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 3559.182] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 3559.182] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 3559.182] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 3559.182] (II) NVIDIA(0): Config Options in the README.
[ 3559.187] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 3559.254] (II) Loading extension NV-GLX
[ 3559.278] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 3559.283] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 3559.283] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 3559.283] (==) NVIDIA(0): Backing store disabled
[ 3559.283] (==) NVIDIA(0): Silken mouse enabled
[ 3559.290] (==) NVIDIA(0): DPMS enabled
[ 3559.290] (II) Loading extension NV-CONTROL
[ 3559.291] (II) Loading extension XINERAMA
[ 3559.291] (II) Loading sub module "dri2"
[ 355/var/log/Xorg.0.log
[ 3559.767] (**) AT Translated Set 2 keyboard: always reports core events
[ 3559.767] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3559.786] (--) AT Translated Set 2 keyboard: Found keys
[ 3559.786] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 3559.786] (II) XINPUT: Adding extended input device "AT Translated Set 2 key$
[ 3559.786] (**) Option "xkb_rules" "evdev"
[ 3559.786] (**) Option "xkb_model" "evdev"
[ 3559.786] (**) Option "xkb_layout" "us"
[ 3559.787] (II) config/udev: Adding input device PC Speaker (/dev/input/event$
[ 3559.787] (II) No input driver/identifier specified (ignoring)
mod edit: code tags
Last edited by litemotiv (2011-01-12 16:12:59)

How to ensure OC4J runs after user logs out of a W2003 Server

Greetings,
I have a question. We have BI Publisher running on a W2003 server. When I log into the server, a dos window starts up, and runs the OC4J stuff. When I log out of the server, this process stops.
In order to use the scheduling part of BI Publisher (meaning, reports can be emailed out), the OC4J window must be running (meaning, I cannot log out of the W2003 server).
How do I ensure the OC4J process remains running after I log out of the W2003 server? Note - this was fresh server, with a clean OBISE (Oracle Business Intelligence Standard Edition) install.
Thanks,
Colin Jensen

Use the services created at installation time to startup Oracle AS components.
thant should do the trick

Lightroom CC not showing up in my creative cloud after repeated log out and log in's

tried updating to the latest lightroom, but creative cloud not showing Lightroom CC even after repeated log outs and log back in's. Showed up first time on another machine of mine but not my main desktop machine.

Hi Sandeep,
I just signed up for a 30 day trial and I'm really excited to use the software for movie editing, however I just saw this post after I was trying to use Premiere Pro and sadly I don't have a machine with 64 Bit OS. I was just seeing if there is any way I can cancel my free trial and then start it back up after I get a new computer. I'm really excited about using Premier Pro but want to make sure I can try it out with a film project before purchasing and I don't know how long it will take to get a new computer.
thanks!

Multi-Server Monitor log outs repeatedly

Similar Messages

Maybe you are looking for