Multi session DVD burning not possible with mac?

When try to burn blank dvd or rewritable dvd the multisession option is greyed .
I tried different dvd s but of no use
How to burn multisession dvd?

Similar Messages

Is there a dvd burner that comes with macs? if not whats a good dvd burner for mac os x?

is there a dvd burner that comes with macs? if not whats a good dvd burner for mac os x?

This may help, but it's an accessory with an extra cost:
http://store.apple.com/us/product/MD564ZM/A
This new Superdrive also supports DVD-Audio so you can load more music into it than a CD.

DVD Burner not working in Mac Mini

My mac mini (running OSX 10.7.5) all of a sudden stopped burning/reading DVDs, however CD burning and reading still works.
I ran my system's disk utility and corrected some problems and tried again to no avail. I tried a previously burned DVD which did not work either. However, after trying several DVDs, I got the burner to work (or at least it appeared to as it went thru the usual messages of recording my iDVD movie, but when the recording message showed DONE, the screen appeared to freeze there (typically, at this point, I usually get a message that asks if I want to burn another) --I was able to hit cancel to exit the program. Anyways, the DVD did not burn. At this point on the plus side, I can now read my previously burned DVD... so I tried again to burn my iDVD Movie again but it just spits out after 15-30 seconds.
I saw on some boards that I should try cleaning the burner? Do I have to take my system apart to do this? Do I use a cleaning disk? If this is the case, will my DVD acknowledge it if it isn't working? Or do I just spray compressed air into its slot?
Any help would be greatly appreciated as this is for a job that I need to get out.
Thanks so much!

Yes use a CD/DVD cleaning disk
Also see:
How to clean a DVD Superdrive using a credit card !
It could be that the burning laser died. Different lasers are used for CD and DVD burning

Remote session via RDGW fine with Windows - not possible with Mac ...?

Hi,
I've configured a fresh single RDS Server (all roles on one Server including Gateway) based on Windows Server 2012 R2. Everything works fine when we use Windows 7 with current RDP Client to connect via Gateway/HTTPS.
When we use a Mac (OS X 10.9.3) with current Version of "Microsoft Remote Desktop" (8.0.7), no RDP Connection is established. Error message: "Unable to connect to remote PC. Please verify ...". Login on <external.domain.name>/rdweb
works fine and I'm able to download the .rdp-file and open it with Microsoft Remote Desktop, but after a few seconds the error above appears.
I did some traffic analyzing on our Firewall and it seems that the Mac try to connect on port 3389 on the public ip of the RDS Server, which is blocked. I manually configured a RDP Connection with Gateway - same error. The log of Microsoft Remote Desktop:
[2014-May-22 11:58:30] RDP (0): Final rdp configuration used: gatewayhostname:s:<external.domain.name>
screen mode id:i:2
use multimon:i:1
session bpp:i:32
full address:s:<external.domain.name>
audiomode:i:0
username:s:
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com:1
redirectprinters:i:1
bookmarktype:i:3
use redirection server name:i:1
loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.<name>_RDS
[2014-May-22 11:58:30] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-22 11:58:30] RDP (0): lo0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-22 11:58:30] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-22 11:58:30] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-22 11:58:30] RDP (0): gif0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): stf0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): en0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): en0 af=30 (AF_INET6) addr=<address>%en0 netmask=ffff:ffff:ffff:ffff::
[2014-May-22 11:58:30] RDP (0): en0 af=2 (AF_INET) addr=<address> netmask=255.255.255.0
[2014-May-22 11:58:30] RDP (0): en0 af=2 (AF_INET) addr=<address> netmask=255.255.255.0
[2014-May-22 11:58:30] RDP (0): en1 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): fw0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): en2 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): bridge0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): p2p0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): --- END INTERFACE LIST ---
[2014-May-22 11:58:30] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-22 11:58:30] RDP (0): client version: 8.0.24875
[2014-May-22 11:58:30] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-22 11:58:30] RDP (0): correlation id: 7a0a5e55-c35a-c642-882e-788a487a0000
[2014-May-22 11:58:30] RDP (0): Resolved '<external.domain.name>' to '<external ip address>' using NameResolveMethod_DNS(1)
[2014-May-22 11:58:38] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-22 11:58:38] RDP (0): ------ END ACTIVE CONNECTION ------
I remember that there was an issue to establish SSO based on DNS resolve (external Domain Name to internal ip address via Gateway Connection); but we resolved this with a new DNS Zone. But why is it fine on Windows, but not on Mac OS X with Microsoft
Remote Desktop? I wondering why the MRD is not using the Gateway Connection to resolve the RDP host ... ?
Many thanks,
Erik

And log from situation 1:
[2014-Jun-03 14:43:36] RDP (0): Final rdp configuration used: redirectcomports=0
disable themes=0
allow font smoothing=1
session bpp=32
negotiate security layer=1
disable wallpaper=0
full address=rds.something.com
rdgiskdcproxy=0
[email protected]
disable cursor setting=0
gatewayusagemethod=2
use redirection server name=1
compression=1
gatewayprofileusagemethod=1
keyboardhook=2
remoteapplicationmode=0
allow desktop composition=1
connection type=6
alternate full address=rds.something.com
drivestoredirect=*
gatewayhostname=gw.something.com
displayconnectionbar=1
networkautodetect=1
redirectposdevices=0
gatewaycredentialssource=0
screen mode id=2
bitmapcachepersistenable=1
disable full window drag=0
shell working directory=
workspace id=rds.something.com
redirectprinters=1
kdcproxyname=
redirectclipboard=1
use multimon=0
disable menu anims=0
prompt for credentials=0
authentication level=2
audiocapturemode=1
audiomode=0
autoreconnection enabled=1
enableworkspacereconnect=0
bandwidthautodetect=1
alternate shell=
videoplaybackmode=1
promptcredentialonce=1
redirectsmartcards=0
winposstr=0,3,0,0,800,600
devicestoredirect=*
loadbalanceinfo=tsv://MS Terminal Services Plugin.1.something
[2014-Jun-03 14:43:36] RDP (0): Final rdp configuration used: gatewayhostname:s:gw.something.com
screen mode id:i:2
use multimon:i:0
session bpp:i:32
full address:s:rds.something.com
audiomode:i:0
username:s:[email protected]
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com:1
redirectprinters:i:1
bookmarktype:i:3
use redirection server name:i:1
loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.something
[2014-Jun-03 14:43:36] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Jun-03 14:43:36] RDP (0): lo0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Jun-03 14:43:36] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Jun-03 14:43:36] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-03 14:43:36] RDP (0): gif0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): stf0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): en0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): en0 af=30 (AF_INET6) addr=fe80::288:65ff:fe37:7788%en0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-03 14:43:36] RDP (0): en0 af=2 (AF_INET) addr=192.168.21.114 netmask=255.255.255.0
[2014-Jun-03 14:43:36] RDP (0): en4 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): bridge0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): p2p0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): --- END INTERFACE LIST ---
[2014-Jun-03 14:43:36] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-03 14:43:36] RDP (0): client version: 8.0.24875
[2014-Jun-03 14:43:36] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-03 14:43:36] RDP (0): correlation id: 9c3a9777-747c-704c-86d1-1ace1eef0000
[2014-Jun-03 14:43:36] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-03 14:43:36] RDP (0): ------ END ACTIVE CONNECTION ------
Seems to have disappeared "workspace id=" or is it all right?

DVD Burner not working with 10.5.1

This is REALLY bad.... will not burn DVD's with 10.5.1. Can I go back to 10.5?

I got the same problem: you have to delete the fonts cache.
See the [Latex fonts in Leopard] section on
http://www.stat.duke.edu/~dmm36/tech.php

La Cie external DVD burner not working with OSX 10.5.2

Every time I try to burn a DVD with my external drive I get an error message sayng that the connection is not stable. I have double checked all my connections and everything is fine yet I cannot burn DVDs or CDs. Any ideas????

I have had the burner for about 2 years and was working fine. Worked even after I upgraded to OSX 10.5. Tried to use it the other day, and this problem occurred. Not sure if it happened after the update to 10.5.2.

Multi-session-DVD?

Does the super drive support multi-session DVD burns on any type of media? Or otherwise is there software that facilitates this?
Thanks for any info,
G5/DC/2GHz/SD/10.4.5

Multi-Session DVDs are defined for PLUS media only - MINUS media won't work.
The only application - I'm aware of - that writes DVD +R(W) multi sess. on a Mac is DragonBurn. (Did that myself before I switched to DVD-RAM)
Every current SuperDrive will support DVD +R(W) multi sess.

What external dvd burner is compatible with my 2007 mac mini running OS X 10.5.8?

What external dvd burner is compatible with my 2007 mac mini running OS X 10.5.8?

I have an LG GE24LU20 and works great with either my iMac or Mac Mini.
LG GE24LU20 Optical Drives - 24x External Super-Multi DVD Rewriter - LG Electronics US
Heck' I can even open and close the tray from my menu bar icon,
plus it is way faster and less finicky than the superdrives.

HP C5380 DVD/CD Printing Feature Not Compatible With Mac

I purchased this all-in-one specifically for the feature of printing direct to cd/dvds. Other functions work fine but this will not. After contacting HP Support I am informed that this feature is not compatible with Mac. Surely this is false advertising as nowhere on the packaging can I find any reference to this. Under specifications it shows that system requirements were Mac OSX 10.5.
Has anyone else had this problem? Is there a fix? I have searched mac support but can find no reference to this. Interested to hear other viewpoints and experiences.

Hello,
I would try printing directly on CD/DVD from the application HP Photosmart Studio.. Follow the steps below:
1. Open HP Photosmart Studio
2. Select an image from the Photosmart Studio library/browser
3. Choose "Create" in the toolbar
4. In the menu on the left, choose the following settings:
- Project: CD/DVD Label
- Label Type: CD/DVD (5 inch/120 mm)
5. Move the image from the media bar to the label, resize it if necessary
6. Click "Print" on the toolbar
Regards,
Vicarious

Multi-session DVDs

Is it possible to burn multi-session dvds? It would be nice to burn multiple times to a dvd like you can to a cd. If this is possible, please let me know.

Sorry but no this is not possible.

USB superdrive not working with Mac Pro

Is there a trick to getting a USB Superdrive working with a Macpro?
The drive in the Macpro no longer ejects and have tried connecting the USB drive to both the front and back ports - does it not work with Mac Pros?
Any pointers in the right direction would be much appreciated.

I had a problem my superdrive. It would play dvd's and cd's that were already burnt but would not burn blank DVDs or CDs- in the recent past it had no problems burning. In addition, the Finder would not display the superdrive. When I put a blank disc in it would go to Disk Utilities and would not allow burning. With help from Apple I discovered the problem-- The settings in CDS & DVDs had been changed from When you insert a blank DVD/CD "Ask what to do to to "GO to Disk Utilities". If this sounds like your problem try changing the settings to this:
Try going to; System Preferences/ CDs & DVDs
Change these two settings to this:
When you insert a blank CD: Ask what to do
When you insert a blank DVD: Ask what to do
NOTE: If they are already set to this you probably have a different problem. If they are set to Go to Disk Utilitiy this is probably a solution.
And
Then go to Finder Preferences
Make sure that under "Show these items on desktop:" that the checkbox for CDs, DVDs, and iPods is checked.
Try to burn the DVD again (reload Disc- perhaps restart) and try again.
Don't know how these setting changed but they did. It worked for me.
Message was edited by: pj176

External DVD burner not working

I have LITE-ON DVDRW SOHW-1633S DVD burner attached to my Mac via USB.
When I turn burner on, Mac OS successfully detects it and even ask me to mount blank dvd to my desktop. Also I see burner in Disk Utility as well as in the list of available burners in Toast 7. I can even open and close tray and write CDs, BUT not DVDs. There is some error happening in Toast or any other soft when I trying to burn dvd disk.
Also, I just noticed that in System Profiler in Disc Burning section there is information that Burn support is unsupported.
Is my burner unsupported by Mac OS X and I will not be able to write DVD disks with it?

Hi Sabanin,
don't panic. Download and install this: Patchburn
This should solve your problem.
If this answered your question please consider granting some stars: Why reward points?

Lost ical and the ical 1.5.5 is not working with mac osx 10.5 ?

lost ical, would like to download it, as in the installation disk, I'vent the possibility to do it . The problem is that the ical 1.5.5 is not working with mac osx 10.5 ?

biomecasport,
Welcome to Apple Discussions.
1. Insert the Leopard Installation disk into the computer.
2. The disk will appear on the desktop.
3. Double click on the "Optional Installs" folder.
4. Double click on the "Optional Installs.mpkg."
5. Click on (Continue) in Introduction.
6. Click on (Continue) in Software License Agreement.
7. Click on (Agree) to agree to the terms of the software license agreement.
8. Click on the disclosure arrow ▶ next to Applications.
9. Select (✓) iCal.
10. Click (Continue).
11. After iCal has been reinstalled, download and install the Mac OS X 10.5.8 Combo Update to bring iCal up to the most recent version.

Is the new maverick download not possible with the version lion?

Is the new maverick download not possible with the version lion?
My version is:
Mac OS X Lion 10.7.5

Should be, you can compatibility here:
http://support.apple.com/kb/HT5842

HT4437 is airplay mirroring possible with mac with osx lion?

is airplay mirroring possible with mac with osx lion?

It is a feature of ML not Lion and only if you have a fairly recent (2011 or later, check first) Mac. Airparrot app will do the mirroring on Lion for a couple of bucks.

Multi session DVD burning not possible with mac?

Similar Messages

Maybe you are looking for