Multi-tasking not working

I just updated to the new iOS 4 and when I double click it does not bring up the multi-tasking menu, but rather goes to my phone favorites. I have went to my settings-homebutton -> but there is no option to switch it to "multi-tasking" is there something I am doing wrong?

childersa wrote:
I just updated to the new iOS 4 and when I double click it does not bring up the multi-tasking menu, but rather goes to my phone favorites. I have went to my settings-homebutton -> but there is no option to switch it to "multi-tasking" is there something I am doing wrong?
That's because you have a 3G and not a 3GS. The 3G doesn't support multi-tasking.
If you indeed have a 3GS then somehow you downloaded the wrong version of the firmware.

Similar Messages

Multi gestures not working on iPad Air ios8 onwards

Multi gestures not working on iPad Air ios8 onwards. Turning gestures off then on works briefly. It's annoying. Is the Air bust? In for rep-air?

MMine has not been working ever since ios8 update. Apple blamed a game I have on the iPad, however this problem occurs on all apps including apple own brand.
ITs it's almost like they don't care
come on Apple sort this out !! It's been too long

New 500 GB DVR Multi Room Not working!

I received the new 500 GB DVR this past Friday and set it up over the weekend. I'm having issues with viewing the new content on the new DVR with other STBs.
I've tried rebooting all the boxes and unplug each one but still get the same message that There was error connecting to the DVR STB. It's almost like the boxes are trying to still access the previous DVR. I tried to submit to Verizon Support on Twitter and it's been 3 days without hearing back if they had a solution. They tell me the same cut and paste message they give everyone to DM them on Twitter and here is the link to the form but then you don't hear back at all.
Has anyone else experienced issues with the new 500 GB DVR and Multi Room access?
Solved!
Go to Solution.

I switched from a 7216 MR-DVR to a 7232 and had tech support switch the MR feature to the new box, and have no problems. The STBs and DVRs talk to each other on their own little MoCA network. COAX or splitter issues can cause problems. Router not involved. I have MRDVR running and all routing functions are turned off on the Actiontec, and the the WAN ports are not even connected. The Actiontec is bridge LAN to MoCA. My router is a Linux box. The Actiontec does filter STB broadcast traffic from my LAN. It sees no MoCA traffic except for VOD and guide updates. All other UDP broadcast traffic is blocked on the bridge.
The hub errors people were seeing on the older 1.7 img were not HUB as in router related. The hub acts as the master on the MoCA network. Looking at the STB diagnostic menu D16 for "Connected Home" my DVR shows as the hub and is verified by the MAC address my Linux box assigns an IP address to. If you are having Multi Room DVR issues I can almost guarantee that it is not a router issue. Check and make sure you have good quality RG-6 coax and the proper splitter(s). Make sure there is no line loss or interference between the boxes. Also make sure Multi Room is assigned properly only to the DVR wanting to be the Multi Room DVR. It can not be assigned to more than one DVR. Now with the 1.9 image the rules may change, but I am not sure. Right now it is my understanding that only one DVR can be the HUB. Now that may be changing, we will need to wait and see. I believe it will change.
Now back to removing the old DVR and having Multi Room Enabled on your new DVR. You may want to have both DVRs connected so the feature can be disabled on the old DVR and enabled on the new. If you do not do this and reconnect the old DVR you may end up with two trying to act as HUBs. May not work well with 1.8. Not saying I know for sure, and my assumptions are only based on observations. But when I had Multi Room moved from old to new, both my DVRs were connected, and my system works great.

Install Updates task not working during Build and Capture in SCCM 2012

Working with a new SCCM 2012 installation.
We are trying to get a Build and Capture TS to install all updates for Win7SP1.
All packages are deployed to DP, build and cap machine is in a collection with all updates deployed to it. Agent installation parameters include "SMSMP" "SMSSLP" parameters. Machine is not being attached to the domain during OS install.
Updates can be pushed to existing domain machines, so obviously the updates themselves are working.
The task sequence works correctly to install the image, but "Install Updates" task just sits there and eventually times out. (No indication of updates being installed.) If this task is working, shouldn't I see a Downloading Updates progress bar, or was that
eliminated from 2012?

Same issue for me except I'm running 2012 R2 my B&C runs forever on Install Software Updates, eventually just rebooting and coming back to the login screen of Windows 7 without ever finishing the Install Updates.
Been working on it litteraly for weeks.
1- Tried adding .Net 4.52 as an application installation thinking maybe it would resolve the issue
2- Tried installing via Run Command Line + DISM all hotfixes that require 2 reboots as per (https://support.microsoft.com/en-us/kb/2894518)
3- Tried to simply REMOVE the same hotfixes from my Software Update Groups alltogether.
4- Injected all applicable software updates through Offline Servicing in the SCCM Console (Schedule Updates) on the Windows 7 DVD wim file. That way my logic was that once it would hit the Software Updates, there would be a lot less to install.
I'm at the point where I had to open a case with Microsoft Premier Support as of yesterday. So, nothing new to report yet. But yes, this is a true pain in the ***.
For the sake of comparison, I am running 4 Update Groups: one containing patches up to 2012. Another one for 2013, 2014 and 2015. I have patches for Windows 7 + Office of all categories except Service Packs.
If someone has any ideas, feel free to chime in.

IN UPDATE TASK NOT WORKING

Hi ,
I have used IN UPDATE TASK with a function module. Also used COMMIT WORK after the FM. Even then it is not working. If I comment the IN UPDATE TASK it is working. Any clues please ?
Thank you,
Surya.

Hi Amar,
I assume that V1 and V2 are Start Immed. and Start Delayed under Attributes of FM( under Update Module). If so, I tried both , but no luck.. thanks for your reply.
Anyone have clues please let me know.
Thank you,
Surya

Schedule task not working in OIM11gr2

Hi Experts,
I have coded a schedule task, using the plugin approach, the steps i have followed are:
1. Created the custom code jar
2. Created plugin.xml
the above 2 files are added in plugin and registerd in OIM
3. Created the task.xml and registered in MDSWhile creating the job i could see it shows up in the tasks but when i executed thejob it is giving me below error:
I tried putting it in using UploadJars.sh utility and placed thejar in schedule tasks folder but did not work.
An error occurred while loading the plugin class. Class null was not found.
Please provide help this is really urgent!!
thanks

This is how my Task.xml (MDS file) looks
<?xml version='1.0' encoding='UTF-8'?>
<scheduledTasks xmlns="http://xmlns.oracle.com/oim/scheduler">
<task>
<name>RIMReconTask</name>
<class>com.abc.iam.customtask.rim.RIMReconST</class>
<description>This scheduled task will reconcile the RIM profile to the OIM users</description>
<retry>0</retry>
<parameters>
<string-param required="true" helpText="User Login">User Login</string-param>
<string-param required="true" helpText="User Status">User Status</string-param>
<string-param required="true" helpText="Resource Object">Resource Object</string-param>
</parameters>
</task>
</scheduledTasks>
I have removed the plugin file completely. I have validated that class path and name it is the same as com.abc.iam.customtask.rim.RIMReconST
I have registered the jar in OIM database using UploadJars.sh utility.
I get the following error:
An error occurred while loading the plugin class. Class null was not found.
Dont know what is wrong here !!

Query in Main Task Not Working But it works For BG Task

Hi All,
I have a requirement to send work item to different level approvers for that i have to find final level approver from a table and save the data accordingly ,
i have a main task and a Background task
<b> my problem is that the same query that works in back ground task is not working in the Main Task.</b>
SWC_GET_ELEMENT CONTAINER 'LEVEL' Level. is a macro written in the method in BOR in main task for getting value which is in the WF container and has binded to the task container. it is not picking up the value from the task container to the method.
Please help me on this
Thanks & Regards
Hari Sankar M

hi Arghadip Kat,
Thank You for Your Response, i've tried ur Suggestion but it is again not working
just let me explain again
i have two tasks,(these two tasks are in a loop.) with one BOR(object) and two Methods
One Method is for first Main task and another is for second task(which is a background task)
i need to get a value called final from a table, i've written a query in the method of Back ground task. and i'm getting the value correctly but i'm not able to pass this value to the main task coz the loop exits after executing the subtask and coz loops exit point is the value final.
So for getting the value of Final in main task i've written the same query in main task but its not working.
Thanks & regards
Hari

Authentication Host-Mode Multi-Auth not working

hi
In my lab environment I configured 802.1x with "Multi-Auth" mode for multiple clients on a single protected port to be authenticated agains Microsoft NPS AAA server.
Switch ports configured with Single-Host or Mult-Host options are working fine but "Multi-Auth" mode its not working. My hardware details and configurations are as follows
Catalyst Model = WS-C2960S-24TSL running IOS 12.2(55)SE2
Current configuration : 10423 bytes
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
aaa new-model
aaa group server radius NPS
server-private x.x.x.x auth-port 1645 acct-port 1646 key <removed>
aaa authentication dot1x default group NPS
aaa authorization network default group NPS
aaa session-id common
switch 1 provision ws-c2960s-24ts-l
authentication mac-move permit
dot1x system-auth-control
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface GigabitEthernet1/0/1
switchport access vlan 5
switchport mode access
authentication order dot1x webauth
authentication priority dot1x webauth
authentication port-control auto
authentication timer reauthenticate 7200
authentication violation protect
dot1x pae authenticator
spanning-tree portfast
interface GigabitEthernet1/0/5
switchport access vlan 5
switchport mode access
switchport voice vlan 98
authentication host-mode multi-auth
authentication order dot1x mab webauth
authentication priority dot1x
authentication port-control auto
dot1x pae authenticator
interface GigabitEthernet1/0/7
switchport access vlan 5
switchport mode access
authentication host-mode multi-host
authentication order dot1x webauth
authentication priority dot1x webauth
authentication port-control auto
authentication timer reauthenticate 7200
authentication violation protect
dot1x pae authenticator
spanning-tree portfast
interface Vlan5
ip address x.x.x.x x.x.x.x
interface Vlan98
no ip address
radius-server vsa send accounting
radius-server vsa send authentication
end
My debug log for Authentication, dot1x and AAA is as follows.
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) dot1x_pm_mda_port_link_linkcomingup: voice VLAN 98, data VLAN 5
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Setting domain ALL to UNATHED
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Host access set to ask on unauthorized port since feature
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) host access set to 1 on GigabitEthernet1/0/5
*Mar 1 01:58:51.354: dot1x-ev(Gi1/0/5): Interface state changed to UP
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Enabling dot1x in switch shim
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Host access set to ask on unauthorized port since feature
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) host access set to 1 on GigabitEthernet1/0/5
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Host access set to ask on unauthorized port since feature
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) host access set to 1 on GigabitEthernet1/0/5
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Received clear security violation
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Received clear security violation
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Link UP
*Mar 1 01:58:51.360: AAA/BIND(00000004): Bind i/f
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Assigned AAA ID 0x00000004
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Retrieved Accounting Session ID 0x00000004
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Allocated new Auth Manager context (handle 0x83000002)
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Initialising Method dot1x state to 'Not run'
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Adding method dot1x to runnable list for Auth Mgr context 0x
*Mar 1 01:58:51.360: AUTH-EVENT: auth_mgr_idc_add_record: Recv audit_sid=0000000000000002006CD0E0
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Sending START to dot1x (handle 0x83000002)
*Mar 1 01:58:51.360:     dot1x_auth Gi1/0/5: initial state auth_initialize has enter
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_initialize_enter called
*Mar 1 01:58:51.360:     dot1x_auth Gi1/0/5: during state auth_initialize, got event 0(cfg_auto)
*Mar 1 01:58:51.360: @@@ dot1x_auth Gi1/0/5: auth_initialize -> auth_disconnected
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_disconnected_enter called
*Mar 1 01:58:51.360:     dot1x_auth Gi1/0/5: idle during state auth_disconnected
*Mar 1 01:58:51.360: @@@ dot1x_auth Gi1/0/5: auth_disconnected -> auth_restart
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_restart_enter called
*Mar 1 01:58:51.360: dot1x-ev(Gi1/0/5): Sending create new context event to EAP for 0x4100002D (0000.0000.0000)
*Mar 1 01:58:51.360:     dot1x_auth_bend Gi1/0/5: initial state auth_bend_initialize has enter
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_initialize_enter called
*Mar 1 01:58:51.360:     dot1x_auth_bend Gi1/0/5: initial state auth_bend_initialize has idle
*Mar 1 01:58:51.360:     dot1x_auth_bend Gi1/0/5: during state auth_bend_initialize, got event 16383(idle)
*Mar 1 01:58:51.360: @@@ dot1x_auth_bend Gi1/0/5: auth_bend_initialize -> auth_bend_idle
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_idle_enter called
*Mar 1 01:58:51.360: dot1x-ev(Gi1/0/5): Created a client entry (0x4100002D)
*Mar 1 01:58:51.360: dot1x-ev(Gi1/0/5): Dot1x authentication started for 0x4100002D (0000.0000.0000)
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Received handle 0x4100002D from method
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Context changing state from 'Idle' to 'Running'
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Method dot1x changing state from 'Not run' to 'Running'
*Mar 1 01:58:51.360: dot1x-ev:DOT1X Supplicant not enabled on GigabitEthernet1/0/5
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): Posting !EAP_RESTART on Client 0x4100002D
*Mar 1 01:58:51.360:     dot1x_auth Gi1/0/5: during state auth_restart, got event 6(no_eapRestart)
*Mar 1 01:58:51.360: @@@ dot1x_auth Gi1/0/5: auth_restart -> auth_connecting
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_connecting_enter called
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_restart_connecting_action called
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): Posting RX_REQ on Client 0x4100002D
*Mar 1 01:58:51.365:     dot1x_auth Gi1/0/5: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
*Mar 1 01:58:51.365: @@@ dot1x_auth Gi1/0/5: auth_connecting -> auth_authenticating
*Mar 1 01:58:51.365: dot1x-sm(Gi1/0/5): 0x4100002D:auth_authenticating_enter called
*Mar 1 01:58:51.365: dot1x-sm(Gi1/0/5): 0x4100002D:auth_connecting_authenticating_action called
*Mar 1 01:58:51.365: dot1x-sm(Gi1/0/5): Posting AUTH_START for 0x4100002D
*Mar 1 01:58:51.365:     dot1x_auth_bend Gi1/0/5: during state auth_bend_idle, got event 4(eapReq_authStart)
*Mar 1 01:58:51.365: @@@ dot1x_auth_bend Gi1/0/5: auth_bend_idle -> auth_bend_request
*Mar 1 01:58:51.365: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_request_enter called
*Mar 1 01:58:51.365: dot1x-ev(Gi1/0/5): Sending EAPOL packet to group PAE address
*Mar 1 01:58:51.365: dot1x-ev(Gi1/0/5): Role determination not required
*Mar 1 01:58:51.365: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 1 01:58:51.365: dot1x-ev(Gi1/0/5): Sending out EAPOL packet
*Mar 1 01:58:51.365: EAPOL pak dump Tx
*Mar 1 01:58:51.365: EAPOL Version: 0x3 type: 0x0 length: 0x0005
*Mar 1 01:58:51.365: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
*Mar 1 01:58:51.365: dot1x-packet(Gi1/0/5): EAPOL packet sent to client 0x4100002D (0000.0000.0000)
*Mar 1 01:58:51.365: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_idle_request_action called
*Mar 1 01:58:53.352: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/5, changed state to up
*Mar 1 01:58:54.353: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/5, changed state to up
*Mar 1 01:59:22.188: dot1x-sm(Gi1/0/5): Posting EAP_REQ for 0x4100002D
*Mar 1 01:59:22.188:     dot1x_auth_bend Gi1/0/5: during state auth_bend_request, got event 7(eapReq)
*Mar 1 01:59:22.188: @@@ dot1x_auth_bend Gi1/0/5: auth_bend_request -> auth_bend_request
*Mar 1 01:59:22.188: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_request_request_action called
*Mar 1 01:59:22.188: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_request_enter called
*Mar 1 01:59:22.188: dot1x-ev(Gi1/0/5): Sending EAPOL packet to group PAE address
*Mar 1 01:59:22.188: dot1x-ev(Gi1/0/5): Role determination not required
*Mar 1 01:59:22.188: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 1 01:59:22.188: dot1x-ev(Gi1/0/5): Sending out EAPOL packet
*Mar 1 01:59:22.188: EAPOL pak dump Tx
*Mar 1 01:59:22.188: EAPOL Version: 0x3 type: 0x0 length: 0x0005
*Mar 1 01:59:22.188: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
*Mar 1 01:59:22.188: dot1x-packet(Gi1/0/5): EAPOL packet sent to client 0x4100002D (0000.0000.0000)
*Mar 1 01:59:53.016: dot1x-sm(Gi1/0/5): Posting EAP_REQ for 0x4100002D
*Mar 1 01:59:53.016:     dot1x_auth_bend Gi1/0/5: during state auth_bend_request, got event 7(eapReq)
*Mar 1 01:59:53.016: @@@ dot1x_auth_bend Gi1/0/5: auth_bend_request -> auth_bend_request
*Mar 1 01:59:53.016: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_request_request_action called
*Mar 1 01:59:53.016: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_request_enter called
*Mar 1 01:59:53.016: dot1x-ev(Gi1/0/5): Sending EAPOL packet to group PAE address
*Mar 1 01:59:53.016: dot1x-ev(Gi1/0/5): Role determination not required
*Mar 1 01:59:53.016: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 1 01:59:53.016: dot1x-ev(Gi1/0/5): Sending out EAPOL packet
*Mar 1 01:59:53.016: EAPOL pak dump Tx
*Mar 1 01:59:53.016: EAPOL Version: 0x3 type: 0x0 length: 0x0005
*Mar 1 01:59:53.016: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
*Mar 1 01:59:53.016: dot1x-packet(Gi1/0/5): EAPOL packet sent to client 0x4100002D (0000.0000.0000)
*Mar 1 02:00:23.844: dot1x-ev(Gi1/0/5): Received an EAP Timeout
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): Posting EAP_TIMEOUT for 0x4100002D
*Mar 1 02:00:23.844:     dot1x_auth_bend Gi1/0/5: during state auth_bend_request, got event 12(eapTimeout)
*Mar 1 02:00:23.844: @@@ dot1x_auth_bend Gi1/0/5: auth_bend_request -> auth_bend_timeout
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_timeout_enter called
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_request_timeout_action called
*Mar 1 02:00:23.844:     dot1x_auth_bend Gi1/0/5: idle during state auth_bend_timeout
*Mar 1 02:00:23.844: @@@ dot1x_auth_bend Gi1/0/5: auth_bend_timeout -> auth_bend_idle
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_idle_enter called
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): Posting AUTH_TIMEOUT on Client 0x4100002D
*Mar 1 02:00:23.844:     dot1x_auth Gi1/0/5: during state auth_authenticating, got event 14(authTimeout)
*Mar 1 02:00:23.844: @@@ dot1x_auth Gi1/0/5: auth_authenticating -> auth_authc_result
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): 0x4100002D:auth_authenticating_exit called
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): 0x4100002D:auth_authc_result_enter called
*Mar 1 02:00:23.844: %DOT1X-5-FAIL: Authentication failed for client (Unknown MAC) on Interface Gi1/0/5 AuditSessionID
*Mar 1 02:00:23.844: dot1x-ev(Gi1/0/5): Sending event (2) to Auth Mgr for 0000.0000.0000
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Received AUTHC_RESULT from dot1x (handle 0x83000002)
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Authc Result: no-response
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Method dot1x changing state from 'Running' to 'Authc Failed'
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Context changing state from 'Running' to 'Authc Failed'
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Existing AAA ID: 0x00000004
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Received AAA ID 0x00000004 from method
*Mar 1 02:00:23.844: AUTH-EVENT: Enter auth_mgr_idc_modify_keys
*Mar 1 02:00:23.844: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (Unknown MAC) on Interface Gi1/0/5 AuditSessionID 0000000000000002006CD0E0
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Sending AUTHZ_FAIL to dot1x (handle 0x83000002)
*Mar 1 02:00:23.844: dot1x-ev(Gi1/0/5): Received Authz fail for the client 0x4100002D (0000.0000.0000)
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Method dot1x changing state from 'Authc Failed' to 'Failed over'
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Sending DELETE to dot1x (handle 0x83000002)
*Mar 1 02:00:23.844: dot1x-ev(Gi1/0/5): Deleting client 0x4100002D (0000.0000.0000)
*Mar 1 02:00:23.844: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (Unknown MAC) on Interface Gi1/0/5 AuditSessionID 0000000000000002006CD0E0
*Mar 1 02:00:23.844: %AUTHMGR-7-NOMOREMETHODS: Exhausted all authentication methods for client (Unknown MAC) on Interface Gi1/0/5 AuditSessionID 0000000000000002006CD0E0
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) No more runnable methods
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Context changing state from 'Authc Failed' to 'No Methods'
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Building default attribute list for unresponsive client
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Signalling Authc fail for client 0000.0000.0000
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 02:00:23.844: %AUTHMGR-5-FAIL: Authorization failed for client (Unknown MAC) on Interface Gi1/0/5 AuditSessionID 0000000000000002006CD0E0
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Context changing state from 'No Methods' to 'Authz Failed'
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Signalling Authz fail for client 0000.0000.0000
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) dot1x_switch_authz_fail: Called for GigabitEthernet1/0/5 and 0000.0000.0000
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Host access set to ask on unauthorized port since feature
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) host access set to 1 on GigabitEthernet1/0/5
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Setting domain DATA to UNATHED
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 02:00:23.849: AUTH-SYNC (Gi1/0/5) Syncing update for context (0000.0000.0000)
*Mar 1 02:00:23.849: AUTH-EVENT: Started Auth Manager tick timer
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Started 'restart' timer (60s) for client 0000.0000.0000
*Mar 1 02:00:23.849: dot1x-sm(Gi1/0/5): Posting_AUTHZ_FAIL on Client 0x4100002D
*Mar 1 02:00:23.849:     dot1x_auth Gi1/0/5: during state auth_authc_result, got event 22(authzFail)
*Mar 1 02:00:23.849: @@@ dot1x_auth Gi1/0/5: auth_authc_result -> auth_held
*Mar 1 02:00:23.849: dot1x-ev:Delete auth client (0x4100002D) message
*Mar 1 02:00:23.849: dot1x-ev:Auth client ctx destroyed
*Mar 1 02:00:23.849: dot1x-ev:Aborted posting message to authenticator state machine: Invalid client

Multiauthentication Mode
Available in Cisco IOS Release 12.2(33)SXI and later releases, multiauthentication (multiauth) mode allows one 802.1X/MAB client on the voice VLAN and multiple authenticated 802.1X/MAB/webauth clients on the data VLAN. When a hub or access point is connected to an 802.1X port (as shown in Figure 60-5), multiauth mode provides enhanced security over the multiple-hosts mode by requiring authentication of each connected client. For non-802.1X devices, MAB or web-based authentication can be used as the fallback method for individual host authentications, which allows different hosts to be authenticated through different methods on a single port.
Multiauth also supports MDA functionality on the voice VLAN by assigning authenticated devices to either a data or voice VLAN depending on the data that the VSAs received from the authentication server.
Release 12.2(33)SXJ and later releases support the assignment of a RADIUS server-supplied VLAN in multiauth mode, by using the existing commands and when these conditions occur:
•The host is the first host authorized on the port, and the RADIUS server supplies VLAN information.
•Subsequent hosts are authorized with a VLAN that matches the operational VLAN.
•A host is authorized on the port with no VLAN assignment, and subsequent hosts either have no VLAN assignment, or their VLAN information matches the operational VLAN.
•The first host authorized on the port has a group VLAN assignment, and subsequent hosts either have no VLAN assignment, or their group VLAN matches the group VLAN on the port. Subsequent hosts must use the same VLAN from the VLAN group as the first host. If a VLAN list is used, all hosts are subject to the conditions specified in the VLAN list.
•After a VLAN is assigned to a host on the port, subsequent hosts must have matching VLAN information or be denied access to the port.
•The behavior of the critical-auth VLAN is not changed for multiauth mode. When a host tries to authenticate and the server is not reachable, all authorized hosts are reinitialized in the configured VLAN.
NOTE :
•Only one voice VLAN is supported on a multiauth port.
•You cannot configure a guest VLAN or an auth-fail VLAN in multiauth mode.
for more information :
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/dot1x.html

Schedule tasks not working for SSL.

I am running CF11 using Tomcat 7 and jdk1.7.0_45. I have non-SSL sites that execute the exact same task fine. However for my SSL enabled sites, the task will not run. Does anyone have an idea as to what is causing this?

I can confirm that cfschedule does work with SSL and yes you will need to import the certificate or root certificate into your certificate store if it is not one issued by a "well known" provider that the jre supports. The gotcha is that the certificate domain must match the server name used in the cfschedule call. For us this meant that our www.domain.com cert did not work, even after importing, for https://127.0.0.1/... To fix this we created a hosts file entry so the request didn't have to round trip outside the box.

Pocketmac and tasks - not working

I am a former PC using and have changed over to Mac for business and personal use. I have a blackberry 8703e from Verizon and no matter what I do, I cannot get the tasks to sync. I sent several emails to pocketmac support (with all the data they requested), but I get no reply.
It seems as though tasks are a major problem. I even tried using missing sync, but that too does not work.
Is there anyone that can help me? And I DO NOT want to delete all my data and start over, there is too much there.

Hello,
Take a look at this related post: http://forums.adobe.com/message/5741078#5741078
Hope this helps.
Cheers
Parikshit

Disable port monitoring task not working

Hi,
On SCOM 2012 SP1 the task "disable port monitoring" is not working. When I run it shows a success message but the port\interface keeps to be monitored on scom, the ports that I'm trying to disable the monitoring are members of the Relay Network
Adapters Group. Is there any way to fix this task or manually stop the monitoring of the port\interface ?

Hi Carlos,
By coincidence I ran into the same problem today.
It can be disabled by creating an override where you target the specific port object and set the parameter enabled=false.
I am not 100% sure this is the correct way but it works. I am assuming the disable port does something similar but I have to open up the task to confirm this.
For now I hope this helps.
Regards Marthijn van Rheenen
Blog: Heading To The Clouds

My Laptop TOUCHPAD [Synaptics] multi touch not working on startup

My Laptop is HP Pavilion DV6 - 7040TX
It is working nicely, I noticed one thing. That the multi touch functionality in the touchpad is not working on Windows start up. (Multi touch - Two finger pinch, there finger ....) ie. Only single touch is working, I can drag the cursor, select and click. When I open the Synaptics settings from the Cpanel, the other features are working fine, doesn't make a difference when I closed that settings tab.
This is my issue, some of my friends bought this very same Laptop and they don't seem to have this problem at all. Please help me out of this.
- Manoj

i had the same problem. what solved this for me was to simply go to device manager and under mice and other pointing devices uninstall the touchpad, i had a usb mouse handy just in case i needed it, but then i restarted the laptop and it auto reinstalled touchpad for me and then all options worked on startup.

External Task not working from job

Hi,
I am trying to call a batch file which copied fdr files from one folder to another and runs sarmanalyzer to generate csv files in the edq landing area.
The batch file is working fine when called from command prompt or double clicked in the edq server, but does not work as expected when called from project or job.
I generated a log file which confirms that the log file is being executed by the job to the last line, but the file copying and sarmanalyzer commands simply do not work.
Any pointers are greatly appreciated.
Thanks,
Sid

Hi Nick,
Thanks for help!
My bat file runs without any errors from external tasks in EDQ.
The account has full control on all the shared folders i am using.
My script:
    set ss_temp_dir=D:\Datanomic\dnDirector\config\landingarea\EDQ_Notification
echo s1 > log.txt
    set srm_analyzer_path=\\<appsrvr4>\d$\sba81\siebsrvr\BIN
echo s2 >>log.txt
COPY /Y \\<appsrvr1>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
COPY /Y \\<appsrvr2>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
COPY /Y \\<appsrvr3>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
:: The above copy is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
echo s3 >>log.txt
:: log s1-s2-s3 created in commandarea.
setLocal DisableDelayedExpansion
pushd \\<sharedloc>\siebfile\FDR\
setLocal EnableDelayedExpansion
echo s4 >>log.txt
for /f "tokens=* delims= " %%G in ('dir/b/od T*.fdr') do (set newest=%%G)
echo s5 >>log.txt
copy %newest% %ss_temp_dir%
echo s6 >>log.txt
:: log s4-s5-s6 created in   \\<sharedloc>\siebfile\FDR\
pushd %ss_temp_dir%
echo s7 >>log.txt
for %%F in (%ss_temp_dir%\*.fdr) do (
     ::set outfile=%ss_temp_dir%\%%~nF.csv &&
%srm_analyzer_path%\sarmanalyzer.exe -o %ss_temp_dir%\Snapshot_Working_CSV.csv -x -f %%F
:: The above saqrm_analyzer is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
echo s8 >>log.txt
MOVE /Y %ss_temp_dir%\*.fdr %ss_temp_dir%\BU\
echo s9 >>log.txt
:: The above move is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
::Log s7-s8-s9 created in %ss_temp_dir%
Thanks,
Sid

CFHTTP and Scheduled Tasks not working after CF8 Upgrade

I have recently upgraded to ColdFusion 8. My scheduled tasks
in the ColdFusion Administrator do not work anymore. I ran them
manually without the ColdFusion Administrator from the server and a
local machine via Internet Explorer 7 and they work. I tried to run
the same scheduled task with the same URL via CFHTTP in a CFM page
and this does not work. The logs are not giving me any error
messages. Has anyone run into this? Is this a bug with CF8 or even
an IIS issue? ColdFusion is on a Windows 2003 SP2 server.
Thanks,
Mike

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML dir=ltr><HEAD><TITLE>The page cannot be displayed</TITLE>
<STYLE id=L_defaultr_1>A:link {
FONT: 8pt/11pt verdana; COLOR: #ff0000
A:visited {
FONT: 8pt/11pt verdana; COLOR: #4e4e4e
</STYLE>
<META content=NOINDEX name=ROBOTS>
<META http-equiv=Content-Type content="text-html; charset=UTF-8">
<META content="MSHTML 5.50.4522.1800" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<TABLE cellSpacing=5 cellPadding=3 width=410>
<TBODY>
<TR>
    <TD vAlign=center align=left width=360>
      <H1 id=L_defaultr_2 style="FONT: 13pt/15pt verdana; COLOR: #000000"><ID id=L_defaultr_3>The page cannot be displayed
</ID></H1></TD></TR>
<TR>
    <TD width=400 colSpan=2><FONT id=L_defaultr_4
      style="FONT: 8pt/11pt verdana; COLOR: #000000"><ID id=L_defaultr_5><B>Explanation: </B>There is a problem with the page you are trying to reach and it cannot be displayed.</ID></FONT></TD></TR>
<TR>
    <TD width=400 colSpan=2><FONT id=L_defaultr_6
      style="FONT: 8pt/11pt verdana; COLOR: #000000">
      <HR color=#c0c0c0 noShade>
      <P id=L_defaultr_7><B>Try the following:</B></P>
      <UL>
        <LI id=L_defaultr_8><B>Refresh page:</B> Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
<LI id=L_defaultr_9><B>Check spelling:</B> Check that you typed the Web page address correctly. The address may have been mistyped.
<LI id=L_defaultr_10><B>Access from a link:</B> If there is a link to the page you are looking for, try accessing the page from that link.
      </UL>
      <HR color=#c0c0c0 noShade>
      <P id=L_defaultr_11>Technical Information (for support personnel)</P>
      <UL>
        <LI id=L_defaultr_12>Error Code: 400 Bad Request. The data is invalid. (13)
        </UL></FONT></TD></TR></TBODY></TABLE></BODY></HTML>

GPO Preference Scheduled task not working

Hi,
System info: Windows 2008 R2 and Windows 7
I created a group policy object which switches off automatically all client PCs at 2AM everyday.
But this did not work..the task is running as domain admin.
I have checked GP result and that setting was applied successfully.
Are there other ways to troubleshoot this issues?

> So far in my experience, GP Modeling always help me to troubleshoot why
> such GPO is not being applied to a particular user or computer.
Skip Modeling, use Resultant Report :) And gpupdate - if neccessary at
all - has to be run on the client.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Multi-tasking not working

Similar Messages

Maybe you are looking for