Multi-track project syncing with video

Dear All,
After I sent a project from FCP to Soundtrack Pro, the sound tracks have no linking with the video. That is, if I move a clip accidently, the clip will become out-of-sync with the picture. Is there anyway I can lock the audio files with the video making sure no out-of-sync?
Thanks.
King

Every Clip can Be locked in sdtr pro.
Highlight the specific Clip(s) in your Timeline in sdtr pro, rightclick and Select Saving Clip
After that all selected Clips are saved, you can not Move them until you unlock them.

Similar Messages

  • Audio not syncing with video in itunes

    Just upgraded iTunes (to sync wiht my iphone 5C) -- after a few playbacks the audio stopped playing while video would continue (no issues with music or in any other video playback outside of itunes).  I turned off the equalizer, which returned the audio track to syncing with the video, except when i expand to full screen viewing -- the audio gets off track again and never catches up.  In looking through user comments this seems a frequent problem for iTunes with Windows, but I have OS X 10.8.3.

    Just upgraded iTunes (to sync wiht my iphone 5C) -- after a few playbacks the audio stopped playing while video would continue (no issues with music or in any other video playback outside of itunes).  I turned off the equalizer, which returned the audio track to syncing with the video, except when i expand to full screen viewing -- the audio gets off track again and never catches up.  In looking through user comments this seems a frequent problem for iTunes with Windows, but I have OS X 10.8.3.

  • Multi track project  shows audio track 1 & not 2  need help!!!!

    hello everyone... Have a sequence in fcp 1 video track 2 audio tracks i right mouse click the sequence go to send to click on multi track project it sends to soundtrack pro but only track 1

    This would frustrate me in the beginning and sometimes it will come back to me. I'll blame that on the Pro tools I have installed. Make sure that device is enabled in controll panel, hardware. Disable the ones you don't use. I don't think AA will recognize usb or firewire hardware if that is what you have. Needs to be a card. I use the M-Audio Delta L1010. 8 inputs. I use 8 direct outs from my mixing board into the 8 inputs on the card. Sounds very good for the price.
    Good luck.
    Donnie

  • After ATV2 5.0 update Netflix audio is not in sync with video

    As the title says, on ATV2 after the 5.0 update, Netflix audio is not in sync with video.
    Anyone else seeing this?

    I spoke tooo soon.
    Netflix audio is not in sync with video today as well. Any movie, it happens to all.

  • HT4589 When using compressor voice is not sync with video. What causes this and how to fix it, please?

    When using compressor voice is not sync with video. What causes this and how to fix it, please?

    Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
    Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
    If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
    Let us know how you get on.

  • Error sending multi-track project back to Final Cut Pro, can't open XML

    I am an experienced Final Cut Pro user but just tried using Soundtrack Pro for the first time on a real project. I sent the audio from my Final Cut sequence to a Soundtrack Pro multi-track project, added a few effects and created some fade-ins and fade-outs, and then tried to Export back to Final Cut.
    I selected "File > Export", named my file and selected "After Export > Send files to Final Cut Pro sequence."
    Now in Final Cut an error appears that says "The document “Name.xml” could not be opened. Final Cut Pro cannot open files in the “Final Cut Pro XML File” format."
    Am I crazy or is something wrong happening here? I can get the exported audio files to appear in my sequence if I select "File > Import > XML" in Final Cut, but after this whole process Final Cut seems to be functioning unreliably (after closing Final Cut and re-opening, I even once got a similar error that said "Final Cut cannot open files in the Final Cut Pro Project File format", which is obviously crazy).
    Am I doing something wrong? Any advice would be greatly appreciated.

    hi,
    i have the same situation. expirienced in fcp, new in soundtrack pro.
    similar message. did you find an solution ?

  • Audio not sync with video using photo booth since os moutain lion was installed

    Since OS Moutain Lion was installed my photo booth no longer function well, audio is not sync with video, the sound delay is obvious with the video outut wha can I do to correct this?

    I've seen that problem in several threads, both here and in the Mountain Lion forum. I tried to replicate the problem but was unable to do so... so it's not a problem effecting all Macs. Try posting here - in the Mountain Lion forum - and see what you get as a search. There's one specific "More Like This" to the right on this thread but there doesn't seem to have been a solution posted.
    Good luck,
    Clinton

  • PVC2300 recorded audio is not sync with video

    Hi all,
    I have a big big problem with my new PVC2300 network camera:
    when I recording (from browser interface) the audio of the .avi file is not sync with video... in details in a record of 12-13 minutes the audio ends 8-10 seconds before the video... and I suppose that more lenght is the recorded file and more lenght is the desync between audio and video.
    I use MPEG4 video stream at 640x480 30 fps and audio G.711 A-Law in mode "simplex - listen only".
    For my usage this is a very big isssue... I hope there is a way to fix it.
    Thanks in advice
    Robert

    I tried for 2 days for all possible configurations, editing: frame rate, quality, resolution. and type of stream (MPEG4 or MJPEG).
    The only case that the recorded audio and video is sync is setting the SMB protocol to autorecord to a NAS.
    But this mode have a lot of problems (.asf  format, large file size and continuos recording without the ability to start and stop the recordings).
    I think that the desync is a bug (a very big bug) of yours activex control  that makes the recording.
    I have find more or less a workaround using the Cisco Client... the program get an error on start (after unintall and install few times, and a lot of test, I understand that the only way to use the Cisco Client is running it as administrator.
    Ok finnaly the cisco program works, but using it I found another problems:
    after recorded, I tried to export a part of recording for testing the audio-video sync... the program gives me 2 format: AVI (without the ability to choose any other options) and ASF (with quality options). I tried first AVI format... the result sucks: bad video quality, 1,8 GB every 20 minutes and audio desync... no comment! ...then I tried the second export format: ASF...thats OK, the result is good... audio finally is syncronized with video.
    My system is Windows Vista SP2 (32bit) and Internet Explorer 8... I tried also from an other pc with Windows 7... same problems recording from browser interface.  I have installed on my system the lastest video codecs (for example: divx etc.).
    For my usage I can use the Cisco Client but my ideal usage will be recording from browser.
    I think these problems are very serious for a product as is this camera.
    I hope there is a way to resolve they... maybe with a future firmware update or installing an other software.
    Thanks
    Robert

  • Audio not synced with video on movie downloads

    The audio is not synced with video on movie downloads from the ITunes store.  I have downloaded many movies in the past from the same PC with no problem.

    Hi Jimmyjoefl,
    I understand that you are having playback issues with videos you have purchased from the iTunes Store. After doing some research, I found the following resource that describes your exact symptoms:
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/TS1718
    Here are some things to check if, when viewing a movie in iTunes for Windows Vista or Windows 7, you notice that a video appears distorted, intermittently pauses, or has audio that is out of sync with the image on-screen.
    Thanks,
    Matt M.

  • Monitoring audio in sync with video when capturing in FCP studio

    Is there a way I can monitor audio in sync with video when capturing in FCP Studio? I know you can plug headphones into your tape deck but that sound is not in sync with the video in the capture window due to time delay. I tried plugging the headphones into my Powerbook but could not get any audio coming through these, nor audio through the Mac's inbuilt speakers.

    The preview checkbox is ticked and the audio monitor indicates that sound is being picked up (the levels rise and fall) but I still can't hear anything! The audio/video sync on the external monitor is ok, but because there is a time delay between that and the video capture window, I can't use that as a reliable monitor for sound sync. If I could resolve the video sync problem there, then I could monitor the sound through the external monitor.

  • The audio on my purchased tv shows doesn't sync with video.

    The audio on my purchased TV shows won't sync with video.  Any ideas?  Thanks.

    Hello jjos4,
    It looks like the article below has some troubleshooting steps for this specific issue.
    Note: The article mentions that it is for Windows Vista and Windows 7, but most of the troubleshooting should still be applicable in Windows 8
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    Hope that helps,
    Griff W.

  • Audio no longer syncs with video thanks to some frame changes I made - HELP

    I had frame issues with a feature-length movie recorded at 24p and edited on a 24fps timeline. My early settings led to a repeat frame every 3 frames. I have since changed the pulldown, though I don't know from what to what to be honest. Maybe it WAS 2:3:2:3 and now it's 2:3:3:2, or the other way around. Not sure at this point.
    I made other changes, too. I found a setting to change from interlaced to progressive, which only made sense since my footage was captured on the progressive setting on the Panasonic DVX100. So I changed that, too.
    I may have changed another setting or two as well until the video looked more accurate and lost the 'flicker' or 'jerky' appearance on long, tracking shots.
    Through all these changes, the audio didn't suffer anything. Now, with a new audio mix from my sound engineer, the dialogue matches perfectly for the first several minutes, but by the end of the movie, it is off by several seconds. I have tried to revert to my original video settings to see if I can sync the video and audio, but I have had absolutely no success. Even the earlier audio mixes that kept sync through the video changes are now out of sync.
    And the movie's length has not changed.
    HOWEVER... my music selections have held their positions perfectly throughout. I am at my wit's end with this and I am, no doubt, lacking in explanation to expect one of you experts out there to solve my problem. Anyone who is willing to take a shot at this, please let me know!
    I should mention, too, that I have opened a backup copy of the movie from another hard drive - a backup copy saved before any of the video settings were altered. And that file has the same problems, too. I'm frustrated with the way Final Cut handles system preferences and doesn't adjust to the preferences of the individual file, but rather the last saved settings. Makes it difficult to backtrack.
    Again, thank you for struggling through this tome and accept my gratitude in advance for any effort given to assist me!
    Justen
    Message was edited by: prov

    It's going to be very important for you to figure out what format your video was captured in. You have almost definitely been editing at a frame rate that was different from the frame rate of your video, which is why you were seeing problems with panning. Have you been watching the video on an external television or just on your computer screen? Chances are there isn't a quick fix for this issue. You're either going to have to learn about this technical stuff or you need to find someone who knows about it who can troubleshoot with you in person. I've written a little bit about editing in 24p on my website. This post is a good start. http://www.kylegilman.net/2007/03/01/24p-headaches/
    <Edited by Moderator: Insert Disclaimer to URL>
    DISCLAIMER: I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    Your audio was probably not recorded in Pro Tools, it was edited and mixed in Pro Tools. How was your audio recorded on set? Did you have microphones going into the camera or did you record into a separate machine like a DAT player or a hard disk recorder?
    My advice for now, not really knowing exactly what the problem is, and assuming the timecode on your imported AVI files matches the timecode on your DV tapes is to do a batch capture of your sequence straight from the DV tapes, capturing using the DV NTSC 48 kHz Advanced (2:3:3:2) Pulldown Removal preset. This will at least ensure that your video is at the correct frame rate. Unfortunately it won't ensure that your audio will sync up.
    Also, have you tried changing the speed of your mixed audio to either 99.9% or 100.1%? This will not be a complete fix because you still probably have some duplicated frames in your video, but it might put it back in sync.
    And make sure you have a back up of your project and media before you do anything else.

  • Teouble with audio becoming out of synce with video.

    Hello, I'm using final cut to edit my videos but for some reason, FCP has been giving me some issues. In my work flow I often layout two long video track in the timeline, then I will chop up the top track to create transitions from the top to the bottom and vise versa. as soon I press play, it the video will start off in a slower speed almost as if the computer is overloaded, then it catches up to normal speed in about a second. This has really been driving my crazy. It also effects the way video syncronizes with audio. I can lay both video tracks on top of one another perfectly in sync with the audio, but as sometime once it get's to new scene or the video switches to another track the audio is no longer in sync with the video. sometimes I can stop the footage, then press space bar to copntine and the audio and video will be in sync. This is really weird and I was wondering if anyone has any answers for me. I'm pretty sure it's not an overload on the system because the projects are rather small, and I'm using a quad core 2.5, with 5 gig of ram. and this is my graphic card info
    NVIDIA GeForce 7800GT:
    Chipset Model: GeForce 7800GT
    Type: Display
    Bus: PCI
    Slot: SLOT-1
    VRAM (Total): 256 MB
    Vendor: nVIDIA (0x10de)
    Device ID: 0x0092
    Revision ID: 0x00a1
    ROM Revision: 2152.2
    Displays:
    Cinema HD:
    Display Type: LCD
    Resolution: 1920 x 1200
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    HWP D5259A:
    Resolution: 1280 x 768 @ 75 Hz
    Depth: 32-bit Color
    Core Image: Supported
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Thanks so much for you time.
    Mike

    Yes. Those that are designed to work with A/V files will work better.
    Drives from G-tech and Granite Digital are worth a very close look.
    However, if you have an empty drive bay in your G5, a second internal SATA drive is the better choice.
    good luck.
    x

  • Trouble exporting multi-track project

    A client gave me a drive with his show on it. I 'm supposed to cut the sound on Sound Track pro, it's an experiement for me.
    I've exported multi-track before, and have exported from this project, one of the daily roll assemblies. But something in the final version is totally screwing me.
    It exports and then I get the message that the exported session file can't be opened.
    G5 Dual Core 2 gighz   Mac OS X (10.4.2)   Final Cut Studio, Sound Track pro 1.0.5

    Well I think I've found the problem a 4 track wave file. Seems Soundtrack Pro really is not ready.

  • Bluetooth audio not in sync with video on iPad 2 with iOS 6

    I noticed that after I upgraded my iPad 2 to iOS 6, there was a problem with I use my A2DP Bluetooth headset (Jabra Halo) with my iPad 2. The audio is no longer in sync with the video playback! And it's really annoying. This problem does not exist when I plug in a headset to the iPad.
    Is anyone else facing this issue? I only has one bluetooth headset so I'm not sure if this is a problem with my Jabra Halo headset or the iOS 6. This used to work without any issues with iOS 5.

    Hi mynew:
    Welcome to discussions!
    Did you make the video in imovie and send it to iDVD?
    Read this and fill in iMovie 6 where iMovie 3 is..
    iMovie: Improving audio and video synchronization
    http://docs.info.apple.com/article.html?artnum=42974
    Extracting the audio from the video and using 16-bit instead of 12-bit are explained there.
    Sue

Maybe you are looking for