Multi-VRF support on Catalyst IOS Hybrid

Hi,
I have Catalyst 6509/Sup720. I intend to use hybrid sw (CatOS [SP] + IOS [RP]).
I am planning to configure Multi-VRF feature.
Is the Multi-VRF feature on hybrid version.? If no, is there a plan to support it in the future.
I saw this feature supported on Cat IOS system native, but can't seem to find on the hybrid one.
Thanks
SSng

Multi-VRF (VRF-Lite) is not supported in Hybrid mode. I don't think that there are any plans to support it in the future either. You would have to migrate to Native mode.
Hope this helps,

Similar Messages

  • Multi-VRF CE or VRF-Lite support on 1800/2800

    Can anyone please confirm whether ISR 1800 and 2800 series devices support Multi-VRF CE functionality and which IOS release should be used?
    I could not find any document which is explicitly mentioning the above for the mentioned boxes.
    Actually my Purchase Order has been held up due to this... ;-)
    Thanks...

    Yes, they both do. For specific IOS version required, please refer to the Cisco IOS features navigator:
    http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
    Hope this helps,

  • VRF support

    Hi:
    1) Is VRF support dependent on switch/router model device or IOS version?
    2) What devices support VRF currently? or what IOS version supports VRF now?

    Hello,
    A1) Yes, Multi-VRF (aka VRF-lite) depends on hardware and IOS software version.
    A2) VRF support starts at 850 and 870 series router, 1700, 1800, 2800, up to CRS 1 and Catalyst 6500. So a very wide range of products and IOS versions support Multi-VRF.
    For a detailed list of all IOS versions on all hardware platforms please cosult http://www.cisco.com/go/fn
    Hope this helps! Please rate all posts.
    Regards, Martin

  • Multi-vrf CE/vrf lite Instances

    I'm currently looking at deploying vrf lite on our ce's but I'm unable to locate the limitations on how many instances can be run. I realise that the low-end ce's (1700, 2600) the limitation is 5 instances. Is there any other CE related devices that can run more instances, if so, how many and what devices?
    Regards
    Mark

    Hi,
    The 5 instances restriction comes from the "Designing MPLS Extensions for Customer Edge Routers" Product bulletin. The following script from that document is:
    Conclusions
    In order to ensure that their data is kept private while traveling across a Service Provider’s network, customers are presented many VPN options to suit their needs. This paper has focused on one particular type of VPNs: MPLS-VPNs. A general description was outlined for MPLS-VPNs in order to discuss the new feature in Cisco IOS release 12.2: Multi-VRF CE.
    Multi-VRF CE extends limited PE functionality to CE devices by allowing the traditional LAN network behind a CE router to be segmented into separate VRFs. With this feature, the CE router is now able to segment their LAN traffic into a maximum of 5 separate VRFs.
    So, I'm not sure whether this is just a standard feature set for all models, or this particular feature has been upgraded to support more vrfs, which as you say, will require the appropriate capacity.
    Regards
    Mark

  • Multi-vrf ce and ospf domain-tag

    I have configured an mpls vpn between two customer's sites. In every site I have installed two cat35xx with a multi-vrf ce.
    I have a multi access ospf neighbour ship to the customer equipments and a bgp session to mpls backbone.
    The ospf routes are redistributed on bpg and vice versa.
    On ospf process can I use domain-tag to prevent routing loop?
    How can i do to verify the domain-tag's functionality in this architecture?
    I've tried to configure domain-tag but the ospf database contains all tagged routes but how can i be confident that these routes'll not be announce back to mpls backbone through bgp session between catalyst 35xx and Pe?
    Is the the domain-tag functionality supported with vrf-lite?
    Thanks in advance

    Hi Martin,
    I've ospf process running only on catalyst 3550 with vrf-lite, the ospf routes are announced to the PE through bgp session configured between the catalyst 3550 and the PE.
    Does the vrf-lite support the same functionalities of native PE-CE ospf in the mpls vpn, as domain-tag?
    Thanks in advance
    B.

  • Is 1000Base-T GBIC Supported in Catalyst 6006 now in China?

    Is 1000Base-T GBIC Supported in Catalyst 6006 now? If so, what is the hardware/software environment it needs (i.e.1000Base-T GBIC Card type and the CatOS or IOS version)?

    Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml
    If anyone else in the forum has some advice, please reply to this thread.
    Thank you for posting.

  • Multi-VRF

    Hi.
    I intend to understand what a multi-vrf is, but the bottm line is, I don't seem to understand them very well.
    I was asked about it and I was surprised that I was not able to find an easy way to explain them.
    If you are to explain what a multi-vrf is, how would you do it?
    What are the basic ups and downs?
    Thanks

    Hello Jayson,
    a Multi-VRF CE is a device that has multiple VRFs and is shared between different customers and is generally owned and managed by the service provider.
    From a technical point of view the multi-VRF CE has a subset of the features of an MPLS PE.
    It has the capability to segregate traffic of different customers and to support address overlapping but:
    there is no support of MPLS forwarding so there are only VRF access links both to the customer both to the real MPLS PE.
    There is no support/need of the MP-BGP for address-family Vpnv4.
    The uplink is usually made with an high speed 802.1Q trunk where each vlan carried is mapped to a different VRF/Customer.
    The customer benefits are the sharing of the CE device and of the high speed uplink(s).
    Scalability is the issue in comparison with a real PE:
    a PE with N VRFs can use N+1 interfaces (N access links + 1 MPLS backbone link)
    a multi VRF CE with N VRFs needs 2*N interfaces (for each VRF one link towards the customer and one towards the SP PE)
    The same is true for the routing relationships: on each VRF a different routing relationship exist with PE (it can be eBGP in VRF or IGP OSPF or EIGRP in VRF) while a real PE has one/two BGP relationships with the RRS and this is enough for all defined VRFs.
    Often a Multi-VRF CE is a multilayer switch that can offer high port density at a cheap price.
    Hope to help
    Giuseppe

  • 3745 Multi VRF with modules ??

    Hi,
    Please anyone can tell wheather Gig modules are supported on 3745 and if yes then how many? Also please tell which is the Gig module I could not find on cisco.com.
    And also do the onboard LAN ports support Multi VRF function ?
    Thanks
    NK

    We use VRFLite with the onboard LAN ports and it works just as expected.
    hth
    -birgit

  • Multi VRF CE and CoS/QoS

    Looking for some details on do's and dont's for Multi-VRF CE. Also wondering how CoS/QoS is supported. If I want to do CBWFQ on the CE that is supporting Multi-VRF CE can I do it per subinterface to have a policy per VRF?

    It depends on what platform you are using. The 7200 and 7300 do not support CBWFQ on sub-interfaces right now. Ive heard September this year but wont hold my breath. The 12k supports it but only on the E3 card not the 10portgigE4+ card.

  • Multi-language support for user-specified text strings used in the forms

    multi-language support for user-specified text strings used in the forms
    Instead of creating multiple forms, 1 in each different language, for the same service, is there any workaround?

    Hoan - is your question what are the considerations when creating multiligual catalogs? If so, I can tell you that at other clients I have seen them use a single catalog for one or two languages. For the two langugages, such as Spanish/English, you can create a single catalog with both of them. Once you get to more than two languages, the catalog would get unweildy and is therefore not suggested.

  • Win 8.1. Core language and multi-language support.

    HI,
    I've used a US developed program with multi-language support for years in Win XT and Win 7. As the program now supports win 8.1. I've upgraded to 8.1. and the new release of the program. However it will not work properly and the reason given is
    that my version of 8.1. has a different core language compared with what  the program uses and this version is not multi-language supported. Now I wonder if there are various versions of  the core language in 8.1. or is the core
    language unique, supported by various language packets for menu's, guiding texts, etc.  Why do I then need a multi-language supported program? Where can I put this question?
    Regards
    Sverre

    I'd probably try them here.
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=fsharpgeneral%2Cvcgeneral%2Cvbgeneral%2Ccsharpgeneral%2Cwindowsgeneraldevelopmentissues&filter=alltypes&sort=lastpostdesc
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Has anyone heard definitely that Apple has stopped supporting anything but IOS 7 for FaceTime?

    Has anyone heard definitely that Apple has stopped supporting anything but IOS 7 for FaceTime?

    No such announcement has been made.
    From the various posts on the forums, it seems users on various devices and versions of iOS are having issues, even those with iOS 7.
    ~Lyssa

  • Multi-master support

    I have a LDAP server that want to sync entries to an AD. Can I config the a multi-master for the LDAP ?

    Hi, the current Meta-Directory product looks at just one changelog (the RetroChangeLog for Sun ONE Directory v5.x) and as such true and full Multi-Master support with Meta is not possible at this time. However, the engineering team are in the process of documenting what cohabitation is possible when Meta is used against just one of the two Directory masters. This white paper will be available in a few weeks time, if you email me or contact your Sun ONE account manager this information will be provided to you.

  • Multi-Lang support and slides issue

    First, is anyone here using slides-based Flash documents at
    all? Whenever I post my (IMHO well-researched) questions/reports,
    like the one linked to below, I never get an answer. By now I'm
    ready to give up completely on slide-based documents and ready to
    convert it all to "flat" Flash docs, but I'm just curious why the
    numerous horrible bugs in slides get no response, did everyone else
    but me know not to use them???
    (older problem, actually more a report because there is no
    solution, it's clearly a bug IMHO:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=288&threadid =1255720&enterthread=y)
    Anyway, I found a new issue, which, like last time, I first
    successfully and easily recreated using a fresh (slide-based)
    document to make sure my AS code isn't interferring.
    Doing the same experiment with bot a "normal" Flash document
    and with a slide-based one, I created a dynamic text field and
    followed (Macromedia/Adobe) instructions to setup multi-language
    support (en,de) for the text field, using the Strings dialogue.
    It all worked as it should in the regular Flash doc, but
    nothing worked in the slide-based one. Right now I'm trying to see
    if I can still get it to work using the Locale class and AS code,
    but that doesn't seem to work either.
    Again, by now I've pretty much decided to abandon slide-based
    layout because of the bugs and the non-existing feedback, I'm only
    curious if I was the only one who ever even tried slides...(?)

    this should work. One thing to keep in mind is that Swing components have fonts set on them, so if the font you are using doesn't contain the characters, then you get garbage sometimes (I see this with japanese characters when they pump into an app I'm currently writing, even though I know I got the right character codes out of the email).
    Try base64 encoding the content before it is sent and save it (the base64) to a text file (Don't send the base64 text, send the actual content). Then base64 encode the content when it is recieved and compare it to the stored file (without the whole displaying thing). If they match, your issue isn't javamail, it is probably swing, or you aren't setting the character encodings correctly. If they don't match, javamail.
    Just taking bets I would say the two will match and your issue is simply the swing font thing.

  • Multi language support by crystal reports..

    Hi Experts,
    Please throw some info or links about multi language support by Crystal Reports.  How many languages it supports at present and what are they?
    Should we create indivitual universes for every language which are required?  if yes, is there any shortcut for the same.
    Need to know about single sign on faclity also.
    Please help.
    Regards
    BaaRaa.

    Just check these links. Hope it might help you.
    http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/e0dedc7d-89a4-2b10-5385-909205c9b99f
    Crystal Report 2008 support the following languages:
    u2022 Chinese Simplified
    u2022 Chinese Traditional
    u2022 Dutch
    u2022 English
    u2022 French
    u2022 German
    u2022 Italian
    u2022 Japanese
    u2022 Korean
    u2022 Portuguese (Brazil)
    u2022 Spanish
    u2022 Swedish

Maybe you are looking for

  • Split Data File and Compare Events

    Hi All, I'm pretty new to DiAdem and the community so I apologize if this has been answered.   The data file I am working with is a vehicle field test and I would like to compare events throughout a single data file events highlighted by the flagged

  • Awaiting my Apple TV - How does WiFi reception compare to your Macs?

    My Apple TV is due to arrive Monday. So happy to finally be getting one. I have lots of videos, music, and podcasts ready in iTunes! Unfortunately, my living room is the opposite of the house, from my airport express. Today I was doing some testing w

  • A great iTunes idea!!

    With all the Apple keynotes (MacWorld confrences and such) that exist, wouldn't it be nice if Apple offered them on the iTunes store to purchase? This would be great because, 1.) Every conference video is historical and would be great for people to l

  • Video Clips From the Net????

    Hey, what would be the best (free) program to lift clips from sites like YouTube to work with them in Imovie....or is that even possible? any help would be greatly appreciated, thank you.

  • Using 64-bit java on Solaris 10 x86

    Hello, I just got a new X2100 server and installed Solaris 10 on it. Everything's running fine and I installed the most recent x86 64-bit jdk 1.5 update on it. However, I can't find any detailed info on how to set the amd64 java binaries and env as t