Multi-wire optical cable for 150...200 meter connection

Please suggest multi-wire cable to connect switches located ~150...200 meters away from each other.
It is needed to have at least 8...10 wires inside such type of optical cable.

Cisco doesn't sell optical cabling. Typically people have optical cable installed by a cabling vendor from rack to rack and terminated in patch panels.
The recommended specification these days for most intra-building applications is OM 3 or ideally OM4 50 micron multimode cable. You tell the vendor how many pairs you require and they take care of it for you.
You only then need to procure the 1-2m fiber optic jumpers between the patch panel and the SFPs in your equipment. Again these would be OM3 or 4 50 micron multimode and generally you need LC terminations on both ends. They are commodity items and available from any number of online retailers.

Similar Messages

  • Optical cable for early 08 MacPro

    Does anyone know where I can buy a replacement optical drive cable for my early 2008 Mac Pro? My broken cable indicates it's a "593-0377 A". I recently bought a cable that was suppose to be for a Mac Pro but it was too short.

    A small clarification if I may:
    An 80-wire cable with 40-pin headers. Special wiring in the headers intersperses the (about five) grounds available in the interface so that a ground appears between every active signal on the cable. This keeps it quiet enough to run at the higher speeds required.

  • TOSlink optical cable for a Ma Pro? How does it work?

    Not sure if this is the place for this question or not, but I am trying to find out more information about the optical audio in/out section of the Mac Pro. On Apple's description page it claims that a regular TOSlink optical cable will work in those slots, but by looking at them, it doesn't seem like it would fit at all. Does a piece in the middle of the optical audio port go inwards? How would you ever be able to get a TOSlink cable to fit it? Anyone have any pictures of an optical cable inserted into a Mac Pro so I can see how it all works?
    I know this might seem like a rather absurd question, but I am trying to figure out if I can plug my old stereo surround sound amp into my Mac Pro to use it for audio. Thanks for the help!

    There are covers that will swing in out of the way as you press a connector against them. At least this is the case on my Mac Pro..

  • Correct optical cable for Apple TV  3rd gen

    I have now purchased two optical cables that were supposed to work with Apple TV. Neither had the correct end that would fit into the Apple TV. This shouldn't be that hard!! Can someone please point me to a link to the correct cable? Google searches bring up info about connecting, but do not say what cable to get.
    thanks!
    Joe

    Thank you for this. I even described and gave the details of the last cable I bought when I called apple a few moments ago, and he said it was the correct one, and it wasn't. I see on the link you provided that there is an adaptor. It looks like the one I have has one long end (no adaptor) and one small square end. My sound system needs the same square end as the Apple TV takes. So, I just ordered what I think is the correct one.
    thanks so much,
    Joe

  • Optical Cable for iMac

    is it possible to connect an optical cable from my iMac 27 late 2012 model to a logitech soround sound??

    Thank you so much! I will try to remember that the next time I'm in town. My amplificator needs just such a cable.

  • Optical cable for storage 3510

    What kind of cable is used to connect to optical storage 3510.
    I know it must be LC/LC. Is it multimodal or singl?
    Is there anything else important?
    Thanks
    Mario

    Use multimode fibre for connecting to a 3510. Also depending on the device connecting to the array, you may need to use an SC/LC cable to get the proper connectors.
    While the array will "auto negotiate" the connection topology "FC_AL" or "FC_SW", I am a big fan of hard setting the topology on each end of the FC link. This will result in quicker "Link Up" times and fewer device timeouts during link events.

  • Where to find an optical cable for iMac in Paris FRANCE ?

    This is not a question : i have the answer and i want to share it !
    On apple store France on Internet, or in Paris at CONNECTIQUE PLUS 60 rue de Malte 01 42 08 54 07.
    With this cable you can connect your iMac to your amplificator to get the Dolby Digital, 5.1, DTS sound !
    Enjoy !

    Thank you so much! I will try to remember that the next time I'm in town. My amplificator needs just such a cable.

  • How to make a cable for VWIC-1MFT-G703 connect to MGX 8830

    I want to connect a Cisco 1721 with VWIC-1MFT to MGX 8830 through E1 port but I don't know how to make a cable.What is the pin assignment of the e1 port on MGX 8830.
    Many thanks for who reply this.
    Thank you so much in advanced.

    The document Understanding 1-Port and 2-Port E1 Multiflex Trunk Voice/WAN Interface Cards (VWICs) has more information on Cisco 1-Port and 2-Port E1 Multiflex Voice/WAN Interface Card (VWIC-xMFT-E1, VWIC-xMFT-G703, and VWIC-2MFT-E1-DI).
    http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b6e0f.shtml

  • Samsung LN52A650 Audio - HDMI or Optical Cable

    Hello,
    I purchased the Samsung LN52A650 in December and just had it mounted. I keep hearing conflicting opinions in regards to whether or not I need a digital optical cable for the audio or will an hdmi cable suffice? I have a Denon AVR1909 receiver and will be hooking a PS3 to it as well as a 7.2 speaker system. Will my hdmi cable carry the audio that i need? Thanks very much.
    Sincerely,
    VM The Prince 
    Solved!
    Go to Solution.

    Actually, if you are wanting to use your PS3 as a BD player, and want to hear the HD audio codecs contained on BD movies, you have to use HDMI. Toslink won't carry the new codecs.

  • Optical cable does not work in Apple TV Software v4.2

    Hi,
    Before I upgraded 4.2, I could hear audio from optical cable and could see video from HDMI.
    In my case, my display can play audio with HDMI, but I prefer to using optical cable for home theater system. Therefore I usually set the volume 0 on the display.
    However, after the upgrade, the audio did not come from optical cable but only from HDMI as ususal.
    I tried the following things but I could not get it better.
    - Reboot AppleTV
    - Reset AppleTV
    - Restore AppleTV
    - Reconnect optical cable and HDMI cable
    - Restart my audio system.
    - Restart my display
    Does anyone have similar situation after upgrading 4.2?
    Message was edited by: hiromalon

    I KNOW! haha, I hate how simplified the Linksys Smart Wi-Fi service is.. I hope that Cisco would enable advanced settings in their next firmware upgrade for advanced users..
    You are pretty lucky to have the EA2700 model. Cisco provides official support for people who do not like the Smart Wi-Fi service to revert back to the classic Web based setup but ends classic web for EA6500. If you feel like trying it out then give it a go! You can make a back up of all your router settings to your computer so if the classic web setup doesn't work for you then you can always upgrade back to the current "Smart" version and restore all your settings.
    Here are the links to that:
    This one talks about the benefits of having "Smart" Wi-Fi and tells you that you can downgrade if you don't like it:
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0 75691a356fa4dda9d40baed9a266813_Why_was_I_updated_to_Cisco_Connect_Cloud_.xml
    This link pretty much tells you how to do it:
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=25856
    UPDATE: I forgot to mention, to back up your current configuration; When you log in to Smart Wi-Fi just click "Troubleshooting", and click the "Diagnostics" Tab and you should see your Backup and Restore settings.

  • Can WAP610N use 4-wire Ethernet cabling?

    My local hardwired ethernet uses 4-wire, CAT5 cabling to get 10 Mbps connectivity. Will the WAP610N work with this cabling? (I understand, of course, that it will be limited to 10 Mbps.)
    Thanks for any help.

    Thanks, I have seen that the CAT5 cabling mentioned in the specs. But CAT5 can be connected using either 2-pair (4 wires, my current configuration because is was installed before 100 Mbps became widely available) or 4-pair (8 wires), although the 2-pair is limited to 10Mbps. My question is whether the 2-pair (4-wire) works.

  • Optical Output for iTouch 4?

    Does anyone know if acompany makes an iTouch4 cradle or cable that would accept a digital optical cable for audio? MP3's are digital, doesn't make much sense to use Analog cables from the iTouch to a digital sound system. [email protected]

    Just saw this post.
    I have the same complaint with iPad output. It's tough to get a straight answer from Apple about the quality of the output from the dock connector.
    1. From what I can find, the headphone jack does not give real Line Out quality. It sounds pretty good through good headphones but not to run a good stereo set.
    2. I have had difficulty finding out what quiality the "Line Out" signal is from the Apple dock for iPad/iPhone.
    3. The HDMI connector from the iPad will support digital audio and should work well according Bang and Olafsen.
    4. You can get OPTICAL output from the Airport Express but I'm not sure how to set it up as a hub WITHOUT needing a connection to the full internet. Anyway you can connect an iPad to a correctly set up Airport Express and play iTunes to it and then it feeds your stereo. This is about $100  but a cable connector (if it existed) would be on the order of $50 so this isn't too bad. I don't have the link on how to do it but I did see it. I'll try to post it.
    Cheers!

  • My iphone 5 is not charging properly. Recently the USB cable was emitting sparks on connecting it to my laptop.This has resulted in physical damage of the wire. Is it still eligible for replacement since it is under 1 year warranty?

    My iphone 5 is not charging properly. Recently the USB cable was emitting sparks on connecting it to my laptop.This has resulted in physical damage of the wire. Is it still eligible for replacement since it is under 1 year warranty?

    Why not. The iPhone was also delivered with a charger to connect to the wall outlet, use it

  • Optical audio cable for iMac?

    I need to find an optical audio cable for my 20" intel iMac.
    I have not been able to determine what kind of cable that it is that I need to be able to hook up my iMac to my logitech z-5500's. I know that the z-5500's have an optical input on them, but it is a standard size optical input.
    Does anyone know what exactly it is that I am looking for?
    Any help is appreciated.

    I wish Apple would sell a nice white Toslink ->Mini-tos adapter, as all of their products seem to be using the connector. (Or better yet, include it with the computers.)
    The cable mentioned above will work fine and is not viciously overpriced like the Monster stuff. Another good quality solution, especially if you already have a regular optical cable, is this adaptor: http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=180-968
    I use two of those (both with Dayton Audio optical cables from the same seller, though any optical cable will do as there's no real difference between any of them) with my iMac and AirPort Express, and have not had any problems.

  • Do anyone know we're to buy a 3 meter long cable for power to my iPad

    Do anyone know we're to buy a 3 meter long cable for power to my iPad?

    http://www.amazon.com/AmazonBasics-USB-Lightning-compatible-Cable/dp/B00FA4Y7N2/ ref=sr_1_7?ie=UTF8&qid=1396967394&sr=8-7&keywords=Apple+lightning+to+usb+cable
    http://www.amazon.com/ACEPower%C2%AE-CERTIFIED-Premium-Lightning-Generation/dp/B 00HMY1LIC/ref=sr_1_28?ie=UTF8&qid=1396967688&sr=8-28&keywords=Apple+lightning+to +usb+cable

Maybe you are looking for

  • How do i create a new row in a table binding?

    seems like this should be easy. apparently it is not.

  • IBR PDFExport error

    hello , i see this error when i try to convert word to PDF by using IBR server : Step PDFExport forced conversion failure by conversion engine because of error: stack trace An error has occurred. The stack trace below shows more information. !csLogJo

  • Is there a way to use eraser tool with soft edges?

    Hi, I am wanting to erase the edges of a rectangular object so that it blends better with the background, and am wondering if there is a way of doing this using the eraser tool with soft edges? Here is a snapshot to illustrate further what I mean: Yo

  • My ipad is disconnected to my wifi, though wifi is fine, and in settings it says it is connected..help pl

    this has been happening frequently lately. when I look in settings it says that my ipad is already connected to my home wifi, but I can't get on anything that uses it. I'm am not good with this stuff as it is all new to me, so any help would be appre

  • Can you contact the owner with serial number

    Hi! I found an ipad yesterday on the road (screen broken) and it is reset. It is locked with the activation lock. I wonder if apple can inform the owner of the device (can be tracked by serial number) so that they could contact me? BR Naga