Multi Y-scale zoom problem

I created two Y-scales on my XY Graph and attached one plot to each scale. The problem is that when i am trying to zoom the graph it changes both scales. I tried to set Active Scale before zooming but that didn' help.
Is it possible to zoom scales independently using Tools from Graph Palette?

Hi Jonni,
I have attached an example in LabVIEW 8, you can change your Y-Axis range to zoom in on individual plots.
Regards
JamesC
NIUK and Ireland
Attachments:
Use Axis range as zoom.vi ‏15 KB

Similar Messages

The new version of Firefox does not seem to allow multi-touchscreen pinch/zoom feature. Is this a bug or is there something I can do to fix the problem? Thanks.

Since the new version of Firefox (which I love, esp the reduced menu bars at the top, leaving more web page viewable space), I am unable to use the multi-touch pinch/zoom function to resize pages. the scrolling still works, and all worked fine before.
Is this a bug or is there something I can do to fix it?
Thanks for your time.
Mx

Not a fix but if it's just a web site here and there that you find yourself using the pinch zoom feature you can use the IE Tab 2 addon to automatically use the ie engine and the zoom works.
You lose the other firefox features on those pages but as I said, if it's just a few sites it's worth a look.
I sure hope the Mozilla community fixes this in their desktop PC version soon. You can't gripe if it's free so I just keep waiting. :)
Their android and iOS version supports it so why not the PC version?

Zoom problem (help needed urgently)

friends,
i m working on a class in which there is one JPanel inside a JInternalFrame. i have functionalities like zoomin and zoomout. for that i m writing my code on mouse clicked of JPanel but my problem is that mouseClicked method is getting called several times even if i click once on JPanel and thus zooming the JPanel by a very large value.
please help me if u have any solution for it.Its very urgent.

it would be difficult to post complete code so i m posting the important part of my code related to this zoom problem.
public class PaintPanel extends JPanel implements MouseListener
     public Rectangle normalShape;
     public int initialX =0;
     public int initialY = 0;
     public int finalX = 0;
     public int finalY = 0;
     protected void paintComponent(Graphics g)
addMouseListener(this);
super.paintComponent(g);
scale = zoomvalue;
// System.out.println("scale value is " + scale);
Graphics2D g2d = (Graphics2D) g;
AffineTransform at = g2d.getTransform();
AffineTransform atnew = new AffineTransform();
atnew.scale(scale,scale);
at.concatenate(atnew);
// g2d.setTransform(at);
g2d.setTransform(at);
public void mouseClicked(MouseEvent e)
// get the position of mouse released
setCursor(new Cursor(Cursor.DEFAULT_CURSOR));
finalX = e.getX();
finalY = e.getY();
temploc3 = finalX;
temploc4 = finalY;
if(WellPlot.zoomFlag)
System.out.println("zoomvalue in mouseClicked " + zoomvalue);
zoomvalue += 0.1 ;
setZoom();
return;
}

Is there any way to help aid this annoying wallpaper zoom problem?

So with the addition of iOS 7 came a new feature; parallax, adding a 3D effect to the home and lock screens. This is all fine and dandy, but 1. I don't like the feature because it wastes battery to use the gyroscope to just make the wallpaper move a bit, 2. The parallax doesn't even look 3D, and 3. Which is my main problem, it messes with the scale and zoom of when I am trying to set a wallpaper.
So pretty much what I am asking, is there any way to make more of a wallpaper show when I set it? Even with "Perspective Zoom" turned off, most of the edges of the picture are cut out and the "Fix" introduced with 7.1 doesn't seem to fix anything relating to the annoying zoom problems, other than giving people the option to not have their wallpaper move, but still have animations-and oh that brings up something else-
Turning off "Perspective Zoom" turns off the wallpaper moving, but not the app icons moving. If you look closely, the apps move too, in the opposite direction of the wallpaper, to help give more of a parallax effect. The movement is a lot more subtle, but still definitely there.

I never had any problem installing wallpaper. Knowing the photo is going to enlarge start with a photo smaller then full screen. If the photo is too small when you try to install it you can enlarge it by putting two fingers on the screen and moving your fingers apart.

Chart x scale update problem

LabVIEW 8.5.1
Sweep Chart Problem
The x scale values do not update until after the 2nd sweep. The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
It appears to be a problem with the chart, since it happens with any vi with a sweep chart. I've used versions 6 through 7 for years and never seen this. I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
I've included a simple example.
Thanks much,
JSC321
Attachments:
Chart Sweep Scale Update Problem.vi ‏32 KB

You have a typical race condition!
There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
(Execution order is enforced even if the wire value is not even used inside the loop )
Try it!
Message Edited by altenbach on 12-23-2008 11:08 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
HistoryRace.png ‏10 KB

Multi Block Form Navigation Problem

Hiii
i have got a multi block form the problem that am facing now is that when running the FORM and when am over one of the my canvases then if i tried to press any of :
(Tab button,Down arrow ) the canvas changes to ANOTHER Datablock ...
i dont know what is the problem ....
ANY SUGGESTIONS
OMD

Make the datablock you want to show on top as the first block in the object navigator.
HTH.
Regards,
Arun

Zoom problems with G30

When I zoom out with the rocker switch on my G30, the zoom will return to a wide angle, especially if I lightly touch the telephoto end of the rocker. It will continue to return to wide angle by itself, even if I move the rocker switch to telephoto. This seems to occur when the weather is hot (we shoot outside much of the time) and the camera has been operating for an extended period. This zoom problem does not seem to happen if the touch screen and remote zoom are used and the camera is cool. I bought this camera 9/2013. Has anyone else experienced this issue? Could this be a defective zoom switch? Would updated firmware make any difference? Any help would be appreciated.

Hi mimages!
Thank you for posting.
Based on your description, the camcorder will need to be examined by a technician at our Factory Service Center. To start this process, you'll need to complete a Repair Request on our website.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Muse phone version jotform zoom problem

Hi
I have added a jot form to the phone version of a website www.mycharitablelegacy.org.uk but when someone goes to fill the form in the website zooms in on the form field and makes it very difficult to complete.
Does anyone know if there is a metadata line of code to add to the phone version in the pages> page properties> metadata to stop the zoom so the forms can be completed easily?
I found this when i googled this http://stackoverflow.com/questions/4472891/how-can-i-disable-zoom-on-a-mobile-web-page and i added the metadata code;
<head>
<meta name="viewport" content="target-densitydpi=device-dpi, initial-scale=1.0, user-scalable=no" />
</head>
This did stop some of the issue but made the site move around in the phone browser so i had to remove it? By adding this also has enabled me to determine this is a muse issue rather than a jotform issue.
Any advise would be great!
Thanks
Steve

I have the same problem.
this page causes the problem. And all same sub pages.
Golfkauppa Helsinki - Konalassa
Desktop version works well. So does front page of my mobile version,
but when you go to that page, mobile version stops working and switch to desktop version.
I have cleared my cookies and everything. But always this same page does the same.
Please help

IOS Wallpaper Scale/Zoom Issue Returns in iOS 7.1

Is anyone experiencing the photo zoom/scale for wallpaper issue again where they cannot fit scale down the photo subjects to fit into the iPad's frame?
This used to be fixed by turning off the Parallax effect via Settings > General > Accessibility > Reduce Motion ON
However, it seems like Apple has broken it again.
Can anyone else confirm this? I just tried changing wallpaper on iOS 7.1 and cannot get the photo to fit as if I was looking at it from the Photos App.

Nope, it's broken for me. Images with resolutions much larger than the iPads native resolution won't scale down. You can easily scale up, just not down. It's very aggravating that this remains an issue in 7.1
And, I'm sick of hearing people say it's working when it doesn't. It's not just my device. I've confirmed it on numerous devices new and old, iPhone and iPad. Not being able to scale an image down when you could prior to iOS7 is not "better". Losing capability is not "better".

XY graph zoom problem

Hello,
There is a issue when you zoom in using a XY graph. Say you have a two points one at 0,0 and another at 10000,10. If you zoom in to say point 5000,5 the centre point the line will be way off nowhere near where it should be crossing. I was wondering if anyone knows a fix for this problem?
Thanks

I agree that this does not look right, but is probably due to limitations in the math used. Once you zoom into the area of iterest, the position of the line actually changes as a function of zoom level. (for example, the 5000 crossing of the line is at 5.00, then at 5.015, then at 5.16). I am sure the accuracy it could be improved, but maybe at a cost of performance.
It should definitely be investigated.
LabVIEW Champion . Do more with less code and in less time .

Gallery zoom problem N8 since PR1.1

I wondered if anyone else has had this....
since 'upgrading' to PR1.1 intermittently, but often the gallery does not zoom correctly.
when i zoom previoulsy it would zoom in the current image in low quality then a couple of seconds later it would paint in the detail....
this painting the detail stage often does not happen and i have to reboot, which often doesn't fix it and i have to reboot again.
sometimes after a reboot, when i open the gallery it will say 'refreshing your media' - anyone else have this - or an idea for a better workaround... how about deleteing all the _PAlbTN directories? where is the gallery database?
There's no dignity in begging for kudos. Do it for the karma.

there could well be a third element to this...
it could be updating to pr1.1 after you have installed bubbles. nokia battery monitor has been giving me hassle too.
but my googling lead me to a bug report on beta labs, it had no other supporters, but uninstalling bubbles removed the problem immediately. not even a reboot required.
bubbles installs all kind of beta versions of all sorts of libraries that are used by all sorts of phone apps. it's a bit cheeky really whilst i understand that a beta is exactly that. this app does appear to have the potential to mess up everything rather than just itself. check this out for a 'known issue' - Installing Bubbles will also install a beta version of Qt 4.7.1 which may cause the Ovi Store client or other Qt-based applications to fail.
There's no dignity in begging for kudos. Do it for the karma.

Zoom problem

Hi guys,
I'm a new user here, but I've been using Photoshop for many years. I'm currently using Photoshop CS5 version 12.0.4.
I recently updated my video driver, and now I'm having a problem with my zoom tool. I'm going to try as best I can to describe it accurately here, and hopefully someone can tell me if there's a way to fix it.
Basically, I used to be able to select the zoom tool, then click and drag to draw a "box" around whatever I want to zoom in on. This is the behaviour I want.
Right now, however, if I select the zoom tool, the behaviour is that instead of getting the "box," it just zooms as I'm dragging. That is, I click, hold down my button, and when I drag to draw the box, I instead end up zooming in (or out, if I drag the other way) of my image, until I let go of holding down the button.
Has anyone seen this before? Does anyone know why this is happening? Or, more importantly, how I can fix it? It's driving me nuts!
Thanks in advance,
Kevin.

Aha! I think I may have found it. There's a checkbox called "scrubby zoom" that seems to control this behaviour. I have no idea why this ever would have become checked, but un-checking it seems to restore the zoom tool behaviour to what I was expecting.
Hope this question helps someone else,
Kevin.

HTML Map tag zoom problem.

Hi,
We have discovered a problem with our webpage that only occurs on safari. We have an image with an image where we use an <map><area> tags to indicate click-able hot spots on the image. When you change the zoom level in the browser, increasing or decreasing the size of the image the relative location of the hot spot changes within the image.
This problem happens in both windows and mac versions of safari. IE, Chrome and FireFox handle this correctly.
Does anybody know how to fix this?

Hi
a webkit nightly from http://webkit.org will likely fix it on an individual machine - but afaik, apple didn't include the fix in the recent safari updates.

Display mysteriously changed... not a zoom problem.

I opened up my computer and the font and display had changed. Now things like webpages don't fit in the screen. Even the desktop picture has changed. It isn't zoom and I've checked the display resolutions. Anyone know how to correct this problem?

Did you try holding down CNTL while you scroll down with the mouse or trackpad.
This can zoom the screen even when the System Preferences > Universal Access shows zoom off.
Regards,
Captfred

Will Labview 7.1 fix scale overlap problem?

I am having a problem with using multiple y-scales. My program demands that the user be able to add and remove y-scales at run-time as needed. When this is done to the waveform graph, scales eventually begin to overlap and the entire graph moves out of alignment. This problem was previosly reported for dealing with XY graphs. In the response the Labview support person stated that there should be a Reset Scale Layout method available at run-time. After incorporating the fix method given in the other report, my axis's still fail to align. Will this method be included for the waveform graph function in Labview 7.1 or has a permanent fix for this problem been made?
Thanks
Jonathon

Hi Jonathon,
Adding/removing scales programmatically can give some strange behavior if you don't manually refresh (or redraw) the graph each time using the Defer Panel Updates method for a Panel Invoke Node. I've attached a simple VI below using a waveform chart, but the same concept applies to waveform graphs.
Let me know if this doesn't fix your problem.
Thanks!
Kileen C.
Applications Engineer
National Instruments
Attachments:
mult_scales_fix3.vi ‏56 KB

Multi Y-scale zoom problem

Similar Messages

Maybe you are looking for