Multicam clipping & video output "shaking"

Hi All . . . I am having some problems with Final Cut Pro X and multicam clipping. I am syncing by audio, and when I play the footage in the timeline, or export the footage the video part "shakes". Audio seems to be fine. If anyone knows of a fix I would be most grateful . Thanks, Craig

As far as I know, there's no workaround within 7.1. If rolling back to 7.0.1 is an option, then that should get Transmit working with multicam editing. But whatever you do, DON'T roll back to 7.0.0--in case you weren't aware, it had a gnarly multicam bug.
If you revert to 7.0.1, please consult this thread: http://forums.adobe.com/message/5823746#5823746#5823746.

Similar Messages

  • Clips from Project bin to source monitor causing video output to go out of sync(CS6 and CC)

    Any footage I double-click or drag from the Project window to the Source monitor causes my video output to go out of sync. When I put the clips in the timeline, video goes back in sync and I'm able to view video output.  My monitors are connected to a Blackmagic Intensity Shuttle Thunderbolt(9.7.5) via component and HDMI. Is this normal behavior in Premiere or is there a setting to enable this? No issues doing this in FCP7(clips from Project window to Canvas).
    Can someone with an I/O from AJA, Matrox, or Blackmagic please test this out for me. Thanks...
    2012 Macbook Pro
    MacOS 10.8.3

    Hi Joe,
    How do you have your audio setup? Try the following.
    - Set your OS system sound to Built-in or Line out audio
    - Select Blackmagic for both Video and Audio in Preferences> Playback
    - Select System Default Input/Output from Preferences> Audio Hardware
    Hope this helps,
    Peter Garaway
    Adobe
    Premiere Pro

  • Why is multicam source not switching cameras on video output?

    When I have a multicam source sequence loaded in the source monitor and I select different cameras nothing changes on the video output (have tried both Decklink and AJA stations). It just keeps outputting camera one.
    Did something break with Premiere CC 7.1.0? Anyone else running into this? Any idea how to fix?

    As far as I know, there's no workaround within 7.1. If rolling back to 7.0.1 is an option, then that should get Transmit working with multicam editing. But whatever you do, DON'T roll back to 7.0.0--in case you weren't aware, it had a gnarly multicam bug.
    If you revert to 7.0.1, please consult this thread: http://forums.adobe.com/message/5823746#5823746#5823746.

  • How to use two audio souces in one multicam clip

    I have a three cameras, and an additional audio source.  Making the multicam clip with of the four elements was easy, however I would like to use both the audio from two different sources at the same time.  Is this possible?  I know about switching the audio from one source to the other, but in some cases, I have talent on stage left and on stage right, and I need the audio pick up from both regardless of the video angle.

    You can do it this way.
    In the multicam select audio to left clip.
    Then find the right clip, detach its audio, take its audio & align it to the multicam clips.
    This way you have audio from let & right

  • How to replace a clip that is part of a multicam clip in FCPX 10.0.9

    I am having an issue with a project drifting out of sync in FCPX 10.0.9.  In the time line everything is in sync, however when I export a master .mov file the video drifts out of sync.  I believe this is because my main audio is an mp3 file.
    MY plan is to convert my mp3 audio to an AIFF file and replace it with the mp3 in my project.  The only problem is that this audio file was imported as part of an hour long musical performance and I took the part I needed  and made it a sub clip.  I then took the sub clip and made that part of a multicam clip.
    Is there anyway to replace this MP3 sub clip with my new AIFF file in the multicam clip?
    Any help is greatly appreciated.

    jfriedman93n3h wrote:
    … I took the part I needed  and made it a sub clip.  I then took the sub clip and made that part of a multicam clip.
    never good practice to 'bundle' clips, sticking compounds into compounds... and in very rare cases needed/could be done 'better' using the tools 'n features FCPX offer....
    Why not simply adding the new audio to your project timeline and synch it?
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#verc1fabc30
    When done, erase the track in your MC ...

  • Video output dimension troubles in CS4

    This is my first project in PPCS4 and I'm having trouble getting an appropriate video output size.  The dimensions of the source clips are 640x480p, and originally only filled a small portion of the frame, with large empty margins around the outside.  I tried scaling up to 299%, which filled nicely, until I realized that the top and bottom were being cut off.  Any suggestions would be greatly appreciated, this is becoming very frustrating !!!

    What kind of source clip (what is the CODEC) and what are your project settings?
    A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

  • No video output to 23" Apple from Windows XP

    I just built a new computer with; Intel E6400 CPU, Asus P5W DH Deluxe motherboard and an EVGA 8800GTS video card. This setup will not give me any video output to my 23" Apple display that was working fine before. It will not post into the BIOS. I have not installed Windows yet. I hooked the computer up to a 19" Samsung LCD and it posted right into the BIOS with no problem. I talked to EVGA support and they think I may need a firmware update. Any idea where I could find out about this problem? The Apple is the second generation with the aluminum frame.

    Let's be constructive:
    BUT WHY doesn't it work? and how can we fix it/make it work?
    my cheap 'non apple' video cable works fine initially, then a message pops up about it not being an 'offcial' cable or some such, then asks if I want to enable airplane mode (both with or without it already disabled), and disables video out completely. Contrary to the many others that have overpaid for your proprietary cables; I'm NEVER EVER EVER EVER going to pay you for your atrociously overpriced cables, because you're action of 'disabling' 3rd party cables is monopolistic in any sense, destroys any hope competition in this area, hinders innovation by third party peripheral developers, and is downright unamerican imho because it does so. You've gone to far this time apple! I've come to the conclusion, you obviously don't care about functionality, as your hardware is almost always overpriced, proprietary, good looking junk, and you keep shaking my pockets for more money with your overpriced accessories and constant barrage of itunes streamery.
    Anyway, how can I use my device to do video out on this officially licensed apple dock I have? It doesn't seem to work; and I paid a lot of money for it. If there isn't a solution; maybe you should give out refunds for all the devices that now don't work? Thanks

  • No video output to ext monitor in rehearsal mode

    (My whole presentation is made up of video and stills)
    Hi, when I'm in rehearsal mode (Keynote 6.5.2) i cannot get full screen video output to my ext monitor.  It is only a black screen. In 'play mode' the presentation plays fine and it will give me full screen video but then i have no control of the presentation as it just plays out to the length of the clips used in each slide. I managed to save as a Powerpoint presentation which allowed me to use the play function and control it manually but i could not see the current slide playing in the presenter display. It also wiped all my trimming settings of the videos i am using.
    Is there a way to run my presentation in rehearsal mode and have full screen video outputed to an external monitor and see my current slide playing on my presenter display.
    My whole presentation is video and stills.
    I am using an iMac, 2.9GHz i5, 8GB Ram, OS X Yosemite 10.10.1.
    Thanks in advance
    Jason

    if i use an iPad to control it gives me full control to advance on click
    Please clarify;   you use the iPad remote control feature to advance manually a presentation on your Mac, or you are playing the presentation on your iPad.
    Did you create the presentation on the Mac yourself and what version of Keynote did you use?
    Try this test:
    create a new blank presentation then drag and drop (do not copy and paste) four slides on to the navigator panel in the blank presentation
    the Navigator panel is the view of slides in a column on the left hand side of the canvas.
    check the settings are set for manual play as I described before:
    Inspector  > Document > Document > Presentation Type:     change to Normal
    select all the slides in the navigator then;    Inspector > Animate > Start Transition:     change to On Click
    click the video on the slide then;     Inspector > Animate > Build In > build order button > change drop down menu to:  on click
    if the presentation plays manually, drag and drop the remaining slides over.

  • How do you create a PIP in a multicam clip?

    I know how to create a picture-in-pictre where I would overlay the PIP clip over the primary clip in my timeline, and reduce the size of the PIP window.
    But I would like to use PIP in a multicam clip. I usually fully switch from one angle to the other. But how do I keep my master clip rolling and make my other angle appear in the PIP?
    Thanks

    Create your multicam clip including the PIP angle.
    Edit the multicam clip into the timeline.
    Select the PIP angle as the active angle. Go forward in the project a bit and cut to a different angle.
    Select the PIP angle in the timeline and use Opt-Cmd-Up arrow to lift it from the timeline.
    Stretch it out for the length of your video so it covers up everything else.
    Select the PIP layer and press Shift-T for the transform function and shape the PIP and position it as you like.
    Should look something like this. Hope you see the images

  • Trouble with my Multicam clip

    I'm trying to synchornize my two camera shots using the multicam button.  All is well in making the clip; however, i notice then when the created multi cam clip is in the timeline it is displaying in a linear fasion with the second camera clips ahead of the first camera footage. In other words, nothing seems to be sychronized. Cameras footage is placed one after the other (not stacked)  If I double click on the clip nothing happens in showing the two clips (stacked) and they still remain all in one line. Very confusing.
    Could use some help!

    I've got everything synched  but my latest problem is trying to make a DVD from my multicam clip. I'm noticing that the secondary footage is not joined to the primary clip. When I join the two clips on one line only one camera is presented and the other camera edited footage does not read or register. 
    I edited the multicam clip in the time line after double clicking from the clip board. I'm also noticing I cant work with titles very well with the two multicam clips in this mode and that when I try to make a copy and put it the two clips into a new project I get a notice that says the video properties of this clip are not recognized and when I click OK  the clips reverse themselves in the New Project time line when presenting themselves. I'm stuck in multicam clip mode and don't know how to get to the next step in which I can move on from the synchronization.
    Sometimes I think it would be quicker to manually edit these clips.

  • Multicam Clip - Nudging Selected Clip Moves Unselected Clips

    Been having problems now for a while with on several projects when I need to manually align clips in a Multicam Clip. For instance when creating the Multicam Clip FCPX doesn't get some of the clips aligned 100% correctly. When I attempt to select a particular clip and nudge it it starts moving all the clips to the right of the selected clip. Suddenly I find the multicam is a complete mess and have to start again. I have to constantly fine work arounds because of this. It's driving me crazy and making what would be a very quick process with the help of FCPX audio align feature a huge nightmare.
    Anyone else come across this. It doesn't happen all the time. And I've haven't been able to single out what starts causing it. It doesn't seem to be linked to a particular type of clip as it happens on many different formats such as 4K, 1080, mov, avchd etc.
    I've shown this to Apple technical support on several occasions and they were not sure what is causing it, but did witness it themselves. I do believe this to be a bug and it's driving me crazy because it's wasting so much of my time. After spending hours finding work arounds and manually readjusting clips again and again, I would actually get this done much faster doing it 100% manually like I used to do in Adobe Premier CS6. Or perhaps use Adobe Premier CC which has audio align?

    Thanks for the trying Luis. Much appreciated.
    It must be something in my footage or some combination of something I'm doing.
    Looks like I'm going to have to spend some time trouble shooting this to figure out what's causing it if other people aren't having the same issue. Apple was unable to reproduce it also.
    Ya, the position tool is selected. I don't think it has anything to do with how I'm manipulation the footage itself. It has to be some weird combination of events together causing this. I'm wondering if it's something in the GH4 footage. I thought it may be only happening when I have GH4 4K footage mixed with 1080 but yesterday I had a multicam clip with only 1080 and it was happening.
    Or it's something specific to my laptop and FCPX.
    I'm going to make a quick demo video and post it for reference. Maybe someone can see something I'm doing wrong or at least show what I'm doing so someone can try to reproduce it.

  • How should I incorporate 60p clips into 24p multicam clips?

    I shot a music video recently on a 7D. I have three variety of clips:
    24p
    24p shot to slow playback, which needs to be sped up to 132% for sync
    60p that needs to be conformed
    How should I incorporate these clips into 24p multicam clips. Do I do all the conforming/speed changes in the multicam timeline after making the clip or is there a way to do it prior in the event browser and be able to take advantage of FCPX's syncing?

    I'm having difficulty following your description. You shot with one camera and you want  to make a multiclip…so should  I asume you had three separate takes of a performance? And the audio? Is it recorded music that you want the talent lip-syncing to? Or something else?
    Justin Powell! wrote:
    24p shot to slow playback, which needs to be sped up to 132% for sync
    60p that needs to be conformed
    Could you also expand upon these statements? Why does the 24p need speeding up and why does the 60p need to be conformed?
    With a typical multi-cam shoot, FCP does a great job of syncing different formats, including multiple frame rates. Those usually are synced by matching (automatically) the waveforms of the reference audio in the various cameras and any other sound sources. But yours does not sound like a typical shoot.
    Russ

  • While multi-camera monitor is open video output looks strobed

    While the multi-camera monitor is opne the video output to my DV deck looks strobed and soft.  Any ideas?  I have CS 6 with a Sony DV deck on a MacPro 5,1.  When I close the multicamera monitor the video on the output monitor becomes sharp again.  This is simply unnacceptable as I need to see the video in full rez while playing back.

    The multicamera monitor has always had an "adaptive resolution" when it comes to playback, meaning the resolution would degrade if it needed to (based on your system's capabilities) in order to keep up real time playback, which is more critical for multicam editing than full res playback.

  • Mailbox effect between shared and quicktime video output

    Here are some screenshots from a movie I'm making. You'll see the kid doing the limbo in the clip at the centre of the top image is mailboxed with black top and bottom. I've added some type to the frame (lower portion of bottom screenshot) and it looks like it'll fall outside the image, but when I export the movie as a medium shared video, it turns out fine (upper part of bottom screenshot).  Make sense? I can't figure out why this is happening and where the edges of my frame are. The problem gets serious if I export to Qucktime because the mailbox effect shows while it doesn't show in the medium shared video output.
    Any advice appreciated.

    Hi this worked for me... After you've changed the stuff within the browser close it out completely, Open the actual QuickTime on your PC edit-preferences then you will see both player and QuickTime separately. You need to uncheck automatically start play in both preferences, in the second one it has a browser tab when you click that the default is set checked for automatically play in browser uncheck that go through each tab in both preferences and make sure autoplay is not enabled anywhere, Good luck Rhondar35

  • MULTICAM CLIP, retiming without affect audio

    i am editing a multicam project, in time line  i want to retime a clip without to affect the audio, so i lift it from storyline, press cmd r and retime, but the angle audio too is affected i want to speed up just the video  and to fill gap with brolls pictures, graphic or whatever. thanks.

    My first thought was the same as Karsten's, but then I checked and, indeed, "Detach Audio" does not seem to be available in a multicam clip.
    I was able to do what you asked by adding a new angle. Made a copy of the existing angle and pasted into this new angle. Now you can use one angle just for the audio and you can do anything you want with the video in the other angle.

Maybe you are looking for