Multicam edit does not generate clips

Trying to do a multicam edit.Two cameras. When going through the process of selecting cam 1 or cam 2 the small blue marker appears on the timeline as it should. Once I have completed my selection the blue markers just disappear and no individual clips are made.
Any help will be more than welcome.

As Kevan noted you may be using the "switch" function as opposed to the "edit" function. If you're using keyboard shortcuts, then to make an edit to angle 1 means you would select cmd-1
If it's not that then make sure you don't have a locked track somewhere in the mix. I wonder if you may even have deselected the auto-select button (not sure if that would impact it or not)
Barring these suggestions you may just simply try trashing preferences, repairing permissions and re-booting the computer.
Good luck

Similar Messages

Cancellation document does not generate Accounting document

Hi Experts,
I am facing an issue that when a Billing document is getting cancelled through workflow ,the billing document does not generate a accounting document .I tried debugging the issue to check it but could not find the root cause of the issue.
In the code we are using 'BAPI_BILLINGDOC_CANCEL1 to cancel the billing document.
How to find that the accounting documents are getting generated from the corresponding billing documents correctly.
Thanks&Regards,
Praveen

First of all, are you able to create S1 type cancellation document after you call the BAPI? If you are not even able to generate the cancel document, perhaps you are missing committing the BAPI after calling it by using BAPT_TRANSACTION_COMMIT.
Also are you able to create cancellation and accounting document by calling the BAPI through a test ABAP program? First check it out before using it in your workflow.

Mailing the Report Output-Does not generating file name

Dear Gurus,
       The below program fulfils the "mailing the report" requirement .it sends the out put as an attachment in XLS format.But one problem exists i.e.,it does not generate filename.It gives the filename as ".XLS"(DOT XLS).
What should be done that system generates a filename?
*& Report ZTESTMAIL                                                   *
REPORT ZTESTMAIL                               .
tables: ekko.
parameters: p_email type somlreci1-receiver.
types: begin of t_ekpo,
ebeln type ekpo-ebeln,
ebelp type ekpo-ebelp,
aedat type ekpo-aedat,
matnr type ekpo-matnr,
end of t_ekpo.
data: it_ekpo type standard table of t_ekpo initial size 0,
wa_ekpo type t_ekpo.
types: begin of t_charekpo,
ebeln(10) type c,
ebelp(5) type c,
aedat(8) type c,
matnr(18) type c,
end of t_charekpo.
data: wa_charekpo type t_charekpo.
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1,
gd_error type sy-subrc,
gd_reciever type sy-subrc.
t_object_header = 'Text.xls'. append t_object_header.
*START_OF_SELECTION
start-of-selection.
Retrieve sample data from table ekpo
perform data_retrieval.
Populate table with detaisl to be entered into .xls file
perform build_xls_data_table.
*END-OF-SELECTION
end-of-selection.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'PO'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp aedat matnr
up to 10 rows
from ekpo
into table it_ekpo.
endform. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
form build_xls_data_table.
*CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
*con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>horizontal_tab,
con_cret type c value cl_abap_char_utilities=>cr_lf.
concatenate 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
into it_attach separated by con_tab.
concatenate con_cret it_attach into it_attach.
append it_attach.
loop at it_ekpo into wa_charekpo.
concatenate wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
into it_attach separated by con_tab.
concatenate con_cret it_attach into it_attach.
append it_attach.
endloop.
endform. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
describe table t_attachment lines t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
append t_packing_list.
Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
importing
sent_to_all = w_sent_all
tables
object_header = t_object_header
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
loop at t_receivers.
ld_receiver = t_receivers-retrn_code.
endloop.
endform.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
refresh it_message.
it_message = 'Please find attached a list test ekpo records'.
append it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY
Your suggestions will be appreciated and rewarded.
Thanks in advance
Murali

Hi
Your pgm is not passing anything in obj_descr in packing list for excel file. If you pass a name your excel file will have that.
Regards
Sathar
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'PO'
' ' *------> no value*
changing gd_error
gd_reciever.
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription *----> no value*
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
t_packing_list-obj_descr = ld_attdescription.

The RFUMSV50 program does not generate transfer lines of deferred VAT

Hello;
The RFUMSV50 program does not generate transfer lines of deferred VAT ,
The context is the following one:
Code VAT Created with code target VAT, general account of VAT also created,
Rule of deferred VAT created and activated for the company code in question, with marks to compensate for check.
The data of tests are the following ones:
Creation of an invoice via the FB60,
Integral payment of the invoice via F-53,
Creation of the confirmation of the operation in bank via the manual statement FF67,
Clearing of the intermediate banking account with the bank account via F-03.
After all these elements, by executing the RFUMSV50 program, I have nothing in result.
There somebody who had the same problem, could help us?
Thank you.

Hi
Service Tax credit cannot be utilized unless the Vendor Invoice is Paid. This is the reason till the payment is done the service tax Amount will be accumulated in deferred tax account and once the invoice is paid the balance in deferred tax is need to be transferred to respective Service Tax , Educational Cess and higher Education Cess account. There can be various business scenarios for full and Partial Payment to facilitates the transfer of such deferred balance to respective account SAP has come up with some new standard program RFUMSV50 instead of RFUMSV25. To overcome the limitation of this program i.e. not able to take care of more than one tax line item, below the solution is provided with scenarios “Full Payment is made to Vendor Invoice”.
hope this is help ful
thanks
Trinath

Edit does not appear in upper right corner of the main screen in camera roll of my iPhone 4S.

Edit does not appear in upper right corner of the main screen in camera roll of my iPhone 4S. My software is the latest ver. 6.1.3 and I know it is supposed to be there because we have other iPhone 4S phones and it is there on them.

I mean chip

Designerd does not generate Order BY code for Sort Order on a lookup tabel column.

I am setting the Sort Order on a column which is based on a lookup table.
When generate the the module, designer does not generate the code for the Sort Order that I set on the lookup table column.
Is there a work around for this problem or is there some thing else that needs to be done in designer to make it generate the order by clause?
I will very much appreciate help.
Regards
Prasad.

A bound lookup item, will be generated as a NON-database item in Forms. Designer generates an ORDER BY CLAUSE (a Forms Block property) for the ordering. But a NON-database item cannot be included in the ORDER BY CLAUSE.
I used a stored function for ordering the lookup item.
Best regards
Harm van Zoest

SQR does not generate PDF file

Hi,
on F9 with 8.49 tools on a Win 2003 server , the SQR does not generate PDF, but only nnnnn.out and nnnnn.log files.
What might be the reason ? What should be verified ?
Thank you.

Hi ...
the table that uses the output file type is PS_PRCSOUTPUTFILE , lokk into this table...
(or)
login to PIA ...
navigate to peopletools--process scheduler--system settings--process type--process output type.
select sqr and see type web and active and default are checked.
Then navigate to process output format (the next tab to the previous one)
then select process type sqr and output destination type web are selected...
then u should see *.pdf is active and default... if not make it default...
reconfigure the process scheduler(bounce the scheduler and clear cache).
that should give u pdf doc....
any questions... please update
Thnks!

In other words jQuery mobile does not generate code with result can not test Apps in dw cs6

from the time compiled in phonegap dw c6 tools and tested from dw the App in Android sdk, for a jQuery mobile App the, code in split/Live is the same as split/Live/Live Code.... in other words jQuery mobile does not generate code with result can not test Apps in dw cs6, but design shown without jQ mobile generated code, well?

well, jQuery mobile stopped to generate code with result can not test Apps in dw cs6, but design shown without jQ mobile generated code, well (neither generated code seems nor design as seem in mobile)....????

Matrixx 7 autocode does not generate ucb and subsystem wrapper for "procedures" code style

Under matrixx 6.1.3  when procedure style code generation is specified (-procs), autocode generates subsystem and ucb style wrappers (see below):
Executing the command:
autostar -l c -o "test.c" -d "/usr/local/apps/matrixx-6.1.3/solaris_mx_61.3/case/ACC/templates/c_sim.dac" -procs "test.rtf"
*        AutoCode/C       Code Generator V6.1           *
*      (C) Copyright 1998. Integrated Systems Inc.     *
*      Unpublished work; Restricted rights apply.       *
*      All rights reserved. Portions U.S. Patent.      *
Loading 'test.rtf' ...
Initializing ...
Processing names ...
Building symbols ...
Executing '/usr/local/apps/matrixx-6.1.3/solaris_mx_61.3/case/ACC/templates/c_sim.dac' :
             Generating procedures declarations ...
             Generating procedures definitions ...
             Generating subsystem-style wrapper (subsys_1)
             around procedure tt1 ...
             Generating UCB-style wrapper(s) around procedure(s) ...
Output generated in test.c.
However, matrixx 7.1.4 does not generate the wrappers. see below :
Executing the command:
autostar -l c -o "test.c" -d "/data/binaries/SUN8/apps/matrix714/solaris_mx_71.4/case/ACC/templates/c_sim.dac" -procs "test.rtf"
*           AutoCode/C       Code Generator V7.1               *
* (c) Copyright 1987-2004. National Instruments Corporation *
*          All rights reserved. Portions U.S. Patent.         *
Loading 'test.rtf' ...
Initializing ...
Processing names ...
Building symbols ...
Executing '/data/binaries/SUN8/apps/matrix714/solaris_mx_71.4/case/ACC/templates/c_sim.dac' :
             Generating internal procedure declarations ...
             Generating procedures definitions ...
             Generating MAKEFILE in test.mk
Output generated in test.c.
Code generation complete.
Please note that the autocode user's guide for matrixx7 indicates that these wrappers are generated when -procs is specified.
-procs: Sets the template parameter procs_only_b as True, and default template only generates Procedure SuperBlocks and generates UCBsand subsystem wrappers for each of these procedures.
Is ther a way to create the same behavior under matrixx7 when -procs option is used?
Thanks

Hello,
These wrappers were separated into different templates. What you would need to do is to run the templates that you need. You can find these templates in the C:\Program Files\National Instruments\MATRIXx\mx_71.4\case\ACC\templates folder.
Hope this helps.
Ricardo S.
National Instruments

TS3274 I working in Citrix and the keyboard does note generate. How can I get it to work?

I working in Citrix and the keyboard does note generate. How can I get it to work?

Close all open apps by double-tapping the home button, then swiping upward on the app window (not the smaller icon) off the screen.
Then reset: hold down the home button along with the power button until you see the Apple, then let go.

Upgrade with DBUA to 12c hangs while upgrade.xml does not generated

Hi together,
actually I've an upgrade problem with dbua. At a server with Oracle Linux 6 I've running an 121.0.2 GI. in that GI there are two Oracle Homes: one 12.1.0.2 wih PSU1 and one 11.2.0.4 with PSU4. I'm trying to upgrade the database "testdb" from 11.2.0.4 to 12.1.0.2 with dbua.
So I'm logged in and set all session parameters to the new 12.1.0.2 home:
$ export ORACLE_HOME=/usr/local/oracle/product/12.1.0.2/
$ export PATH=$ORACLE_HOME/bin:$PATH
After that I start the dbua. i select my testdb and wait. And still wait..... After selecting the db and dbua has getting al the database information he will hang at 0% by "Run Pre Upgrade Utility". But why?
So I've looked into trace.log from dbua:
oracle@testserver- DB_12_1_0_2:/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2
$ ll
total 96
-rw-r----- 1 ora121 oinstall    1374   Oct 17 10:56 mapfile.txt
-rw-r----- 1 ora121 oinstall      104   Oct 17 10:56 preupgdir.sql
-rw-r----- 1 ora121 oinstall 29326    Oct 17 10:56 sqls.log
-rw-r----- 1 ora121 oinstall 53994    Oct 17 10:56 trace.log
-rw-r----- 1 ora121 oinstall         0    Oct 17 10:56 trace.log.lck
ora121@QUM169 - DB_12_1_0_2:/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2
$ less trace.log
In the trace.log he tells me, that he weren't able to create a file called upgrade.xml and throws a java exception:
[Thread-77] [ 2014-10-17 10:56:28.200 CEST ] [PreUpgradeToolGroup.validate:252] validateConnectionToDB using user:=null
[Thread-77] [ 2014-10-17 10:56:28.233 CEST ] [PreUpgradeToolGroup.validate:268] create log dir obj for pre upgrade tool
[Thread-77] [ 2014-10-17 10:56:28.234 CEST ] [PreUpgradeToolGroup.validate:274] creating dir object for pre upgrade spool at/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2
[Thread-77] [ 2014-10-17 10:56:28.239 CEST ] [PreUpgradeToolGroup.validate:320] Executing CREATE OR REPLACE DIRECTORY PREUPG_OUTPUT_DIR AS '/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2' using SQLEngine.
[Thread-77] [ 2014-10-17 10:56:28.244 CEST ] [PreUpgradeToolGroup.validate:362] validationLogDir =
[Thread-77] [ 2014-10-17 10:56:28.244 CEST ] [PreUpgradeToolGroup.validate:376] Preupgrade Utility used= /usr/local/oracle/product/12.1.0.2/rdbms/admin/preupgrd.sql
[Thread-77] [ 2014-10-17 10:56:29.742 CEST ] [PreUpgradeToolGroup.validate:462] Executed Pre Upgrade Script successfully, now load MEP............
[Thread-77] [ 2014-10-17 10:56:29.742 CEST ] [DbuxUtils.writeRootElementForUpgradeXML:509] Passed in upgrade xml file /usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2/upgrade.xml does not exist.
[Thread-77] [ 2014-10-17 10:56:29.742 CEST ] [PreUpgradeToolGroup.validate:479] Executing preupgrade tool
[Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [PreUpgradeToolGroup.validate:480] Spool file /usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2/upgrade.xml
[Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [DbuxUtils.getPreUpgradeLoader:236] upgrade.xml does not generated
[Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [PreUpgradeToolGroup.validate:487] Executing Preupgrade tool failed..Upgrade xml does not exist
[Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [PreUpgradeToolGroup.validate:491] upgrade.xml does not generated
[Thread-77] [ 2014-10-17 10:56:29.745 CEST ] [SQLEngine.done:2278] Done called
Exception in thread "Thread-77"
java.lang.NullPointerException
        at oracle.sysman.assistants.dbma.wizard.view.ValidationPage.prepareMaps(ValidationPage.java:1989)
        at oracle.sysman.assistants.dbma.wizard.view.ValidationPage.check(ValidationPage.java:1651)
        at oracle.sysman.assistants.dbma.wizard.view.ValidationPage$Check.run(ValidationPage.java:2040)
        at java.lang.Thread.run(Thread.java:682)
But why? Does anybody know that error?
Thanks a lot for help and regards,
Dave

Yep they are! The own group they weren't in was the asmadmin group. Amusingly I had to add them both to the asmadmin group, so that the upgrade.xml was created with the oracle 12c user and group oinstal and not with oracle 11g user and group asmadmin. I can't tell you really, why, because it is a little bit confusing why he generate a file with the correct group when I add that group to the user, which was assigned wrong before to the file ?!?!

External editing does not work in LR4 (??)

external editing does not work in LR4 (updated from LR3 a few days ago)
has anyone an idea to solve this problem?
Thank you.
Regards
Priska

priskaleutenegger wrote:
no ..
when I send the RAW Document for external editing (Elements 10) nothing happens at all ... zero :-(
a friend of mine has the same problem - also updated from LR3 to LR4, external editor: elements 10
Which process version is the image you're trying to edit externally?
You right-click (I'm assuming PC, can't help Macs), there should be a context menu option "Edit in". You choose that, and there's an option for Elements 10 or not?
If so, what happens when you select it? Do you get any further message?
If not, you may have to go to Edit menu, preferences, External Editing tab and create a preset for Elements. In the "Additional External Editor" area, click "Choose" and navigate to wherever Elements is on your machine and you can create a new external editor.

Adobe Digital Editions does not detect my e-reader

Can anyone help please? My Adobe Digital Editions does not detect my Sony e-reader and does not appear in my bookshelves. My laptop detects the device without any issues but Adobe does not - I have re-installed twice but still the same.

Re-installing is not the answer. Most likely, the issue is either the
sequence of events that you go through, whether the SONY ereader is
supported and whether it is registered properly. Let me go through these in
reverse order. I am assuming (dangerous) that the SONY is 'new to you'. If
not, then please accept my apologies.
You start with making sure that the SONY ereader is supported by Adobe
Digital Editions (ADE from now on). Check the list of supported devices
HERE <http://blogs.adobe.com/digitalpublishing/supported-devices>. If it
is, then you know that the rest of the process should work.
Next, attach the ereader to your computer. Let's assume a Windows
machine: plug it into a USB port and wait for Windows to recognise it and
tell you your hardware is ready to use. If you've done this before, check
that Windows has added your ereader as a device by going to My Computer and
looking at the disk drives. Your ereader should show up. Then, if you
haven't registered the ereader with SONY, you should go to their website.
It will look for attached ereaders and confirm that it finds yours.
Register it with SONY, using your Adobe ID and password. SONY will then
write a small record onto the ereader, which ADE needs to see. Close the
SONY website.
Next, bring up ADE. If all is well, ADE will recognise your ereader and it
will show up on your bookshelf. If there's a problem with the ereader, ADE
will tell you that, and we can go from there.
If all is well, you can transfer your ebooks via drag and drop. When you're
done, close ADE, but don't disconnect your SONY until it tells you it's
finished updating itself. THEN eject it via My Computer or the small icon
in the system tray at the bottom right of the screen.
Hope this helps!
==================

Adobe Digital Editions does not decect my e-reader

Can anyone help please? My Adobe Digital Editions does not detect my Sony e-reader and does not appear in my bookshelves. My laptop detects the device without any issues but Adove does not - I have re-installed twice but still the same.

Sorry, but you are at the wrong forum; this one is only for discussions on the forums themselves. The Digital Editions forum is here:
http://forums.adobe.com/community/adobe_digital_editions

TopLink does not generate SQL statements for inserting new objects

TopLink does not generate SQL statements for inserting new objects. Why?
Thanks in advance...

Please see the response in
Why does not unitofwork.commit write data to the database?
Regards,
Chris

Multicam edit does not generate clips

Similar Messages

Maybe you are looking for