Multicam Edit playback: One Angle only in Viewer

Hello
I just shot a theater play with 3 cameras, managed to do a multicam edit thanks to the great walkthroughs there is on internet. So I now finished a rough cut, and I want to review the whole thing from the beginning.
Now for some reason, when I play the cut, my Viewer only shows the active angle and not the multiclip.It will show me the 3 angles only if I pause.
Is there some setting I missed?
Here are my settings
RT:
Unlimited RT / Dynamic Playback Video quality and frame rate / Multiclip playback
Thanks in advance
Cheers

Genius. I was having this same problem...thanks!

Similar Messages

  • "Next Edit" on one track only?

    Is there a way to have the keyboard commands for Go To Previous or Next Edit (either ; and ', or Up Arrow and Down Arrow) apply only to one track?
    I sometimes want to use those commands to quickly flip through all the shots in a particular sequence, but when there are many audio tracks below, the playhead will only be moved to wherever the next edit on any of those tracks happens to be. I'd like to have the option of the playhead moving to the next edit on my main video track (V1 say), while ignoring the multiple audio edits underneath.
    Have tried selecting just the track whose edit points I want to use, but that doesn't seem to make a difference. And since I already have numerous audio clip disabled here and there -- for reference and possible future use -- selecting then temporarily disabling ALL the audio tracks would not be feasible.
    (I suppose making all the audio tracks temporarily invisible would be one workaround, but aside from that being a nuisance, I also sometimes want to play part of a clip as I'm skipping along the Timeline from shot to shot, and usually I like to hear the sound with it.)
    So -- any clever way to just have the "Go To Previous/Next Edit" command apply to one track only?
    John Bertram
    Toronto
    (FCP 5.1.4)

    Well whaddaya know!
    John "original poster" Bertram here. Just tested both methods:
    The Auto-Select buttons appear to have no effect re this issue (tried various combinations, including the obvious one of my target track being the only track, video or audio, with the Auto-Select toggled on);
    But Chi-Ho Lee's method worked perfectly! Exactly as described. Once an edit point has been selected, the Previous/Next Edit commands apply only to that one track (hooray!). They do so by actually changing the selection to the Previous or Next edit point. Bonus is that even if I then play part of the clip where the selection point happens to be, the selection itself remains even though the Playhead has moved on -- and the Previous/Next Edit commands continue to work on just that one track (i.e. whether or not the Playhead happens to be in the same position as the selected edit point).
    Thank you CHL! (I wonder if that technique is actually documented?) In any case, it's exactly what I was looking for.

  • Multicam Editing: Not usable, choppy preview

    Hello,
    I'm using Premiere CC and got in trouble when using multicam-editing. Even with only 3 Tracks in my multicam sequence, the preview in the program monitor is nearly useless. It's slow, choppy, stopping, jumping....
    At first, i thought it was caused by my pc. So i bought a new computer, a Dell Precision Workstation T3610 with 32GB RAM, K4000 GPU, Intel Xeon Processor, SSD and SATA Drive. I'm not a pro in editing, but i think, that this configuration should be strong enough to show at least 3 tracks.
    First i tried 9 tracks and if this wouldn't work, it would be ok for me....:-)
    ....but only 3, 3 TRacks with 1920x1080 // 24fps ?? Should working, or?
    Maybe with this system more than 4 cams are possible.
    I'm sure this MUST work, because two years ago, with an older version of Premiere and a slower PC, i edited 6 Tracks and it worked. It must be a problem caused by false settings or something else.
    The system runs on the SSD Disk, also Premiere.
    My Videofiles are located on an internal SATA Drive // 7200. In project setting i stored Previewfiles on an external USB 3.0 drive.
    1. So...often i read that every videofile in my project should be on another harddrive...but ...hmmm...now i have tree harddisks...isn't that enough?
    Every angle = a new hdd?
    2. Project Setting -> Video / Audio Recording, Video / Audio Preview?
    3. I found out something which is maybe interesting:
    3 or more angles are working perfect if im using the "Source Monitor". When i do the same in the "Program Monitor" Premiere is going down, the Preview is chopy and stopping.
    So my simple question: In both windows, source and program monitor, the feature is the same: 3 video angles. Why are the playing so different????
    Maybe it's a bug?
    I would work in this way...no problem for me...source or programm....what the matter? But in the source monitor i don't have the cutting feature....so i HAVE to use the programm monitor.
    What should i do????I
    'm getting more and more desperate....   :-)
    Excuse my english, i hope i could explain the problem good enough, so that you understand and maybe help me.
    Thank you very much
    Kiki

    I have the exact same problem. I used to be able to edit multicam sequences, HD footage, 2-3 cameras at about only 17 mbps or so, with ease. NOw the PC chokes on it. It plays for several seconds, then stops for about ten seconds. I hear my fan spinning faster. It happens if I have the multicam monitor on, but lately it seems to happen for single camera editing as well.
    I'm going to check my nVidia drivers, but I think they're all up to date. I'll check for dust in my PC. Not sure what else to try. Bypassing my USB3 hub? Copy project to a different (new) USB3 hard drive?

  • Multicam editing: Can't get blade to show in angle viewer when trying to edit in Timeline

    This problem just appeared. I have done lots of multicam editing in FCPX, it works great.
    But, today I started on a new video and:
    - I created the first multicam clip, it looks fine.
    - I created a Project and appended the multicam clip into the Project, it looks fine.
    - I see all the Angles in the Angle Viewer, it looks normal.
    - I select the Event Browser and hit play, all angles play. I move the curser over an angle and I see a hand, just as I should. everything fine so far.
    - I click in the Timeline and hit the space bar and the selected angle and audio start to play..........BUT the angles in the angle viewer do NOT play. Not right.
    - With the Timeline still selected, I move the curser over an angle in the angle viewer, and i see the hand, NOT the Blade.
    So, FCPX thinks I am still in the Event Browser, even though when I click in the Timeline, the Timeline background color changes to light grey, which says I am in the Timeline. FCPX is not letting me go into the Timeline (even though the background color changes).
    I have to be doing something dumb, but I don't see it.
    Any suggestions?

    Turns out that was EXACTLY the problem --- I kept looking around and finally discovered the problem was that I was NOT in a project (although I thought I was).
    Nevertheless, thank you for responding.

  • Have created multiclip.  Moved it from browser to viewer.  Saw that the 2 angles were not sync'd.  Held down control/shift on one angle to scroll through clip to put them into sync.  Both angles move at the same time.  What is happening?

    Created Multiclip in browser.  Moved it to the viewer.  Saw that they were not exactly sync'd.  Held down shift/control to move one angle to match the other.  Both angles move at the same time.  What is happening?  I have done this before and have always been able to re-sync my clips to do my edit.

    correction needs to be made to step #14, I typed:
    14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
    Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
    14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
    Another Correction:
    Originally read:
    Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
    Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
    Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW.

  • When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect?

    When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect.

    Yes you certainly can.
    Right click any desktop in the list > Settings > in the left pane select the desktop you want to auto connect to > check "Auto connect to this desktop".

  • In ical, only since the update, when I look at the day view, I can no longer scroll down indefinitely; it stops at one day only

    Since the update, when I use ical , and am on the day view, I no longer can scroll down through multiple days; it stops at one day only. Seems like a poor design change. Any idea how to reverse this?

    cfromflorida,
    Try swiping left/right works for me.

  • Way to rollback only one row of a view object

    Is there a way to "rollback" only one row of a view object? That is, two or more rows have been modified but we wish to only restore one of the rows to the original (database) values.
    Is there a way to retain all of the current rows in all of the view objects for an application module after issuing a jbo:Rollback?
    Thanks

    Is there a way to "rollback" only one row of a view object? That is, two or more rows have been modified but we wish to only restore one of the rows to the original (database) values.In jdev903, a new method is being added to Row interface to reset the row state to the transaction-original state i.e., rollback the row to it's original values.
    Is there a way to retain all of the current rows in all of the view objects for an application module after issuing a jbo:Rollback?No. You may however override before/afterRollback methods on the ViewObjectImpl subclasses to cache the current row key in beforeRollback and restore currency on the default iterator to that rowkey in afterRollback
    Thanks

  • Only using Quick Edit to interact with a list/view in Sharepoint 2013

    Hello All,
    I would like users to only interact with a view in Quick Edit mode as it has all the functions I need (Edit,add and delete) without having to open Web Forms. Is there a way to hide the "New Item" link on all current and future views for a list?  
    Thanks
    MM

    Lobo,
    If you want to hide "+ New Item" which come as web part top left corner, then edit web part
    Select "Data Sheet view" as default view from "Selected view" drop down of "edit web part property"
    - "Data Sheet view" as web part don't show " + New Item" link.
    If that list is display as web part in any of the page not as data sheet view as default then below steps will help.
    Make "Toolbar type" as No toolbar just below selected view
    Change view style to default to "Basic table" from "Edit the current view" of "edit web part property"
    If you want to remove "new item" from file tab of ribbon, then permission need to be removed as contributor to read only. 
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Field editable in FB02 for only one document type and user

    Hi:
    I have a question about editing a field and I hope you can help me. I need to make a field editable in FB02, but only for one document type and two users. The field is BSEG-ZFBDT, Baseline payment dte.
    I have tried in ‘Document Change Rules’, make this field editable when line item not cleared, but it works for all document types and users.
    Please, any idea?
    Thanks in advance for your time.
    Best regards.

    Hi,
    You have to write a ABAP code to achieve this.
    Validation is another Option where you can mention that value is allowed in the Baseline Date field only if the User and Document type value satisfies.
    BR
    Amitash

  • When I open an event I can only see one photo. The view option for dispaying thumbnails is greyed.

    When I open an event I can only see one photo. The view option for dispaying thumbnails is greyed. Iphoto '08 has worked perfectly for years. Suddenly it's balky~

    Have you tried moving the thumbnail size slider at the botton on the screen?
    LN

  • When i use the blade tool to cut a clip in an angle during multicam editing, i can't move the clips afterwards. it's like they are stuck together. ?????? Thanks, Mircea

    when i use the blade tool to cut a clip in an angle during multicam editing, i can't move the clips afterwards. it's like they are stuck together. ??????
    Thanks, Mircea

    Hi,
    I'm using 10.0.7. It's like snapping won't turn off. Instead ,if i use the keyboard to nudge the clips, there's no problem. I am using that at the moment.
    1. when i try to drag
    2. when i nudge:
    3. snapping is off.
    Thanks,
    Mircea

  • Multicam editing in premier pro cc 2014, problem with one camera display size

    Although the clip works fine in a sequence all by itself in multicam editing it is much too large and only a portion displays.  The other camera is fine.  The clips are from different types of cameras 1 is a DSLR, it displays too large, the other is a Sony PD 1570, a pro videocam  that uses tape, it displays fine.

    Have your tried re-ingesting the media.  It's possible the file(s) are corrupt.  I run into this on occasion, especially if the results shows up in the render (which is a dead give-away to file corruption) and re-ingesting fixes it.
    It's also possible that the drive the file resides on has issues as well.  Are you using a raid?  We need more information regarding the specs of your machine and process.

  • Multicam editing issue

    I've been able to successfully create multicam edited squences previously but I've run into a problem I can't seem to figure out. I've followed the steps for creating a multicam form the manual and from Ken Stone's tutorial here http://www.kenstone.net/fcphomepage/multicam_editingmartin.html, but still not luck.
    I'm creating a multiclip based on in points in FCS2. The videos I'm using are H.264, 640x480, 29.97fps, the data & audio rates are different.
    What's happening is after adding/creating the multiclip sequence the clip angles are not playing in the viewer and only one angle plays in the canvas. When I select the second angle I get a red render line above the entire clip. The RT settings are limited to just "Use Playback Settings" and "Full Quality".
    Any help would be greatly appreciated!
    Thanks
    Jerry

    The problem is very likely coming from the fact that FCP doesn't support h.264. It's a delivery format, not an editing format.
    You'd be much better off transcoding these files to a supported editing format such as DV then creating the multiclips.
    Jerry
    Message was edited by: Jerry Hofmann

  • Multicam Editing Not Working

    I'm using Final Cut Pro v10.1.3 and I can't get multicam editing to work.  I've got three angles in my multicam clip and they are all synced properly.  However when I open up the angle viewer and try to edit the clip, I can't.  I see all three angles, but I don't see the icons in the top left that should allow me to edit audio only, video only or both.  And when I try to switch between the camera angles, I can't.  I'm only being show one angle and can't switch to any other.  Any ideas what I'm doing wrong?

Maybe you are looking for