Multicam Edit Really Slow
I am editing DV PAL and have just noticed that there is bug which is delaying my keyboard commands to switch to different cameras in the multicamera window.
Firstly after lining up my two cameras, I exported the audio alone to a wav format so I could mix it from both cameras right. Then imported it back into my project and overlayed the audio in track one of the layered sequence. I muted the audio from both cameras in track 2 and 3. Created another sequence and dragged my layered sequence for multicam edit. Apparently when I start playing with the yellow borders around camera 1, it plays fine but when I change to camera 2 it is just instant and the border now changes to red. If I press 1 for camera 1 it responds after 2 - 3 seconds and carries on like that. At times it appears as if its no longer playing in real time. All the colour correction in the layered sequence have been disabled. I have stopped the editing because I would like to sync some of the sections with music beats in the scene to make it more interesting.
Am I missing something, here or its my sytem or the footage that is just too slow for the editing process? Other than that I might have to push on like that and review the edit once the multicam window is closed. This method will not produce the results I am after. I have done it before and it use to work only slowing down when its coming to the end of at least 50 minutes multicam sequence and this one is just 40 minutes.
All the video files are located on RAID 1.
My system configuration is as follows
APP CS4
HP XW6600
Quad Xeon 5420 2.5Ghz
Vista Business 64bit
Nvidia Quadro FX4600 GPU
8GB RAM
RAID 1 esata
250 GB C drive HDD
750 GB D drive
22" HD monitor.
I have attached a pdf which showed my system perfomance at the time of the multicam edit.
One big bottleneck for the system is the way PPro deals with the audio. For a test, try disabling all the audio. you should see a big performance increase. The trick now is to keep PPro from working too hard on the sound.
Try this - Instead of placing your mixed audio track on track 1 in the source timeline, place it in track 2 of the timeline you actually use for the multicamera editing. Then delete anything in track 1 in this timeline. You can link the video and track 2, but pay attention when you remove material that you are cutting audio 2 as well, to keep everything in sync.
It may still not be perfect, but it should help. You can also disable any color-correction on the tracks until you are finished cutting, as this is a system drag in multicam.
Multicam is overall a bit of a mess in CS4. The delay you see is no fun. You will notice, however, that the actual cut will be at the right moment.
Similar Messages
-
Heavy Retouch Editing Really Slows Down Aperture!
I've been editing a few images in Aperture 3.0.1 that have require a significant amount of Retouch editing. Once I've reached about 70-80 Retouch edit brush strokes, Aperture starts to bog down. If I go over 100 Retouch brush strokes, Aperture REALLY starts to slow down, particularly if I try to export a file to be edited in Photoshop or NIK plugins. In fact, exporting is DRAMATICALLY slowed down, even if just exporting a 800x800 JPG. If I hit 150+ Retouch brush strokes, the Export Version function in Aperture becomes all but unusable. It can take 20-30 minutes to actually export the version! And that's just for a single image.
Once Aperture has caught up with itself, I can go and export a lightly edited image and it will happen in mere seconds. Go back to that heavily Retouched image, and export takes forever!
I sure hope the next release of Aperture resolves this issue! As best I can tell, it is directly related to RETOUCH (both Repair and Clone) and not so much the other Adjustments.
BTW, I have already shared my experience with the Aperture Team via Aperture Feedback.
MarkI've seen this slowdown as well.
I think that, to some extent, that this is an issue that will exist with the type of application that Aperture is. It is dynamically applying your edits and rendering a final image to your eye, and if you have 150 retouches Aperture has to do a LOT of work. I mean, really, the math and calculations required are extreme. Maybe there's a magic bullet for this in how Aperture renders the output, but I don't know from the non-destructive nature whether this is possible. It could just be that I can't think of an easy way. -
Multicam, the more edits the slower it gets
Hi! I have a problem again. I want to do a multicam edit with 2 clips AVCHD, the show is about one hour. AVCHD is no problem it's a i5, 6GB Ram, working smoothly normally.
Now I started editing in multicam monitor and switching the cams on the fly. After a few edits the system got more and more laggy. After a while PR needed about 2-3 seconds to switch cams after pressing the keys.
So I stopped and started from the same point again, but the system kept beeing laggy. After I did the whole show - and it wasn't possible to edit at the right positions, I wanted to shorten the whole show. Now it takes about 10 seconds for the system to make the cut. The colorful Donut appears and it's taking ages to go on and on...
So it seems the more edits (cuts) there are in the timeline, the slower PR gets. What the f.... I've never had a problem like this before with AVID. There it doesn't matter how many edits you have in a project.
What can I do. It's just a 60 Minutes show! What about 90 Minutes etc...
Please help!
ATB
AndreasThis 'may' be your machine, but all of us who use multicam in CS4 have the same issue, so I doubt it's 'just your machine'.
Multicam works great until (my experiences) you reach in the neighborhood of 30-50 "cuts", then it slows down (by slow down I mean the multicam monitor changing from cam to cam delays more and more) until it gets to the point that the user feels/believes the multicam isn't functioning. That "visual feed back" the user gets from seeing the multicam monitor change is (my opinion) a necessity to make the 'multicam feature' usable. In actuality, the multicam cuts are being recorded by CS4, and if you play back your timeline, you'll see the cuts you made, but not having that visual feedback as you are creating the cuts is unnerving to say the lease.
Apparently, Adobe didn't do anything to address this in CS4 updates but I SINCERELY HOPE this will be corrected in CS5. I still have a copy of CS2 on my machine and if I'm going to have to do a lot of cuts in a multicam environment, I resort to using CS2 for my multicam work, then export that to an .AVI and import that .AVI into CS4 as a new file. It's a cumbersome work-around I know.... BTW: multicam worked great in CS2 and CS3, only 'not working so great' in CS4....so, again I doubt that it's really your computer. -
Elements 13 works really slow in editing.Can someone help. I have OSX Yosemite 10
elements 13 works really slow in editing.Can someone help. I have OSX Yosemite 10
First of all, did you have PSE installed before updating to 10.10? If so, you need to do this:
A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog
Also, be sure you have updated to 10.10.1. And if you have a large number of recently imported images in the organizer, PSE will be slow till organizer is through creating thumbnails for the photos. -
I have been working on a Christmas Video and all of a sudden iMovie got really slow and wouldn' let me edit or play the video. I restarted it a few times now and nothing seems to work. What do i do?
Which version of iMovie are you using and what mac do you have?
-
I need a program where I can remove objects and touch up dead grass, etc.
Reviews say Aperture runs really slow with Lion, any suggestions?
To add on to Corky02 answer:
The recent Aperture release AP 3.3.x is very efficient, both on Lion and Mountain Lion. But you need a decent hardware to support it. The older Macs will have problems with the storage and CPU requirements. For good performance on large raw images plenty of RAM is important, at least 4GB, but 8GB would be much better, and your library should be on a fast disk, preferably on an internal drive. And don't let the system drive get too full.
Many reports about Aperture being slow are due to putting the Aperture library onto slow disks or acessing the original image files over the network, insufficient RAM, or corrupted or ill-designedAperture databases.
Aperture excels at all kinds of image processing that can be considered image developement - raw processing and color/lighting adjustments, but does not do compositing. If you are shooting raw and want professional image developement I'd recommend to do this in Aperture and not in iPhoto - you will have much more control over this in Aperture (after a steep learning curve). You can also repair and retouch the image to correct minor blamishes. For graphics compositing and inpainting you can set up an external editor and send your images from Aperture to this external editor - any of the editors Corky recommended would be o.k. for this.
To see, if you will want the advanced image processing in Aperture or the easy to use, more basic options in iPhoro will be sufficient to you have a look at the Aperture User manual, or the tutorial on the support page: Aperture Support
But Aperture is a professional apllication, not "plug and play". You should only consider it, if you are willing to spend some time on learning to use it properly and are willing to work your way through the manual.
Regards
Léonie -
video play back runs really slow its all stick and not smooth why is this i thought macbook pro was fast for this stuff. or will it work better
in final cut pro XIt was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier! -
Installation OIM on redhat Linux really slow
Hello,
I have a problem with the installation of OIM. When I try to install OIM on a linux server (redhat 5.0 64b) with the JRockit 64bits java 1.6.0 (jrmc 3.2.1-1.6.0) version the installer is just really slow. It takes ages for the command line installer to go to the next step.
has anyone else experienced this and found a solution?
greetings,
BasThe machine on which OIM is to be installed has enough memory, I believe it has 8GB..
The weird thing is that the first time we ran the installer, it was just normal (== fast) but the installation failed when deploying OIM into Weblogic and we can't run the weblogic deploy script, since this also fails.. (it throws a nameError: fail on the configoim.py script) That's when we decided to try to install OIM again from scratch.. so we moved the current installation directory to another location and started the installation again. This when the problems as decribed by Bas began.. The installer is really really slow.. we waited for more then 15 minutes for it to continue to the next step.. but it didn't. We checked the machine for spiking processes but the machine was totally idle..
Does anyone know what could be the problem? Are we doing anything wrong? or are we missing something?
Edited by: SteinWelberg on 3-mrt-2010 12:38 -
My Macbook Pro is running really slow and programs keep crashing
I have a 15" MacBook Pro (Mid 2010 Model) that is doing my head in, as it runs really slow most of the times as soon as I open more than one program (especially if I use Excel or Word of course). I ran the EtreCheck and the result is below, hopefully this will help some of you guide me in the right direction?
Most of my memory (over 200GB) is used up by "OTHER", any idea what that could be and how I could easily free up space?
Thanks a lot
EtreCheck version: 2.1.8 (121)
Report generated 17 April 2015 08:02:01 BST
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 155
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:16:25
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (64.39 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
JMicron Samsung S2 Portable 1 TB
EFI (disk2s1) <not mounted> : 210 MB
TIME MACHINE (disk2s2) /Volumes/TIME MACHINE : 999.86 GB (70.54 GB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.logmein.hamachi (1.0.0 - SDK 10.9) [Click for support]
/Library/Extensions/tap.kext
[not loaded] foo.tap (1.0) [Click for support]
/Library/Extensions/tun.kext
[not loaded] foo.tun (1.0) [Click for support]
/System/Library/Extensions
[loaded] com.logmein.driver.LogMeInSoundDriver (4.1.48f99) [Click for support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.67) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) [Click for support]
Startup Items: ℹ️
tap: Path: /System/Library/StartupItems/tap
tun: Path: /System/Library/StartupItems/tun
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.logmein.hamachimb.plist [Click for support]
[running] com.logmein.logmeingui.plist [Click for support]
[running] com.logmein.logmeinguiagent.plist [Click for support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Click for support]
[failed] com.rim.BBLaunchAgent.plist [Click for support] [Click for details]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.hamachix.tuncfgd.plist [Click for support]
[running] com.logmein.hamachi.plist [Click for support]
[running] com.logmein.logmeinserver.plist [Click for support]
[loaded] com.logmein.raupdate.plist [Click for support]
[failed] com.rim.BBDaemon.plist [Click for support] [Click for details]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist [Click for support]
[running] ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Skype Application (/Applications/Skype.app)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2008/Office/Microsoft Database Daemon.app)
Spotify Application Hidden (/Applications/Spotify.app)
BlackBerry Device Manager UNKNOWN Hidden (missing value)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 3.0.5.0 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
LogMeIn: Version: 1.0.935 - SDK 10.7 [Click for support]
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.935 - SDK 10.7 [Click for support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
Picasa: Version: 1.0 [Click for support]
Safari Extensions: ℹ️
1Password
Evernote Web Clipper
WebRank SEO
Audio Plug-ins: ℹ️
EcammAudioLoader: Version: 1.0.3 - SDK 10.8 [Click for support]
CallRecorder: Version: v2.5.14 - SDK 10.8 [Click for support]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Trusteer Endpoint Protection [Click for support]
VLC Streamer [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 254.45 GB
Destinations:
SAMSUNG [Local]
Total size: 999.86 GB
Total number of backups: 36
Oldest backup: 2012-04-09 11:47:32 +0000
Last backup: 2015-02-05 20:06:09 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
11% WindowServer
4% Safari
1% Skype
0% Dropbox
0% rapportd
Top Processes by Memory: ℹ️
241 MB Skype
206 MB Safari
172 MB Spotify
129 MB mds_stores
120 MB Finder
Virtual Memory Information: ℹ️
2.49 GB Free RAM
4.03 GB Active RAM
844 MB Inactive RAM
1.23 GB Wired RAM
2.80 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Apr 17, 2015, 07:54:25 AM /Users/[redacted]/Library/Logs/DiagnosticReports/Safari_2015-04-17-075425_[reda cted].crash
Apr 17, 2015, 07:42:57 AM Self test - passed
Apr 16, 2015, 10:33:24 AM /Users/[redacted]/Library/Logs/DiagnosticReports/PDFpen_2015-04-16-103324_[reda cted].crash
Apr 16, 2015, 08:07:28 AM /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-04-16-080728_[redact ed].cpu_resource.diag [Click for details]
Apr 14, 2015, 07:13:57 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-04-14-191357_[redacted].crashLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.
When you post the log extract or the crash report, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
SQL Query running really slow, any help in improving will be Great!
Hi,
I am really new to this performance tuning and optimization techniques. Explain plan also, I only have theoretical knowledge, no clues on how to find out the real issue which is making the query slow..So if anyone can give me a good direction on where to start even, it will be great..
Now, my issue is, I have a query which runs really really slow. If I run this query for a small subset of data, it runs fast(Its flying, actually..) but if I give the same query for everything(Full required data), its running for ages..(Actually it is running for 2 days now and still running.)
I am pasting my query here, the output shows that the query stucks after "Table created"
SQL> @routinginfo
Table dropped.
Table created.
Please please help!
I also ran explain plan for this query and there are a number of rows in the plan_table now..
SORRY!IS there a way to insert a file here, as I want to attach my explain plan also?
My query -Routinginfo.sql
set trimspool on
set heading on
set verify on
set serveroutput on
drop table routinginfo;
CREATE TABLE routinginfo
( POST_TOWN_NAME VARCHAR2(22 BYTE),
DELIVERY_OFFICE_NAME VARCHAR2(40 BYTE),
ROUTE_ID NUMBER(10),
ROUTE_NAME VARCHAR2(40 BYTE),
BUILDING_ID NUMBER(10),
SUB_BUILDING_ID NUMBER(10),
SEQUENCE_NO NUMBER(4),
PERSONAL_NAME VARCHAR2(60 BYTE),
ADDRESS VARCHAR2(1004 BYTE),
BUILDING_USE VARCHAR2(1 BYTE),
COMMENTS VARCHAR2(200 BYTE),
EAST NUMBER(17,5),
NORTH NUMBER(17,5)
insert into routinginfo
(post_town_name,delivery_office_name,route_id,route_name,
building_id,sub_building_id,sequence_no,personal_name,
address,building_use,comments,east,north)
select
p.name,
d.name,
b.route_id,
r.name,
b.building_id,
s.sub_build_id,
b.sequence_no,
b.personal_name,
ad.addr_line_1||' '||ad.addr_line_2||' '||ad.addr_line_3||' '||ad.addr_line_4||' '||ad.addr_line_5,
b.building_use,
rtrim(replace(b.comments,chr(10),'')),
b.east,
b.north
from t_buildings b,
(select * from t_sub_buildings where nvl(invalid,'N') = 'N') s,
t_routes r,
t_delivery_offices d,
t_post_towns p,
t_address_model ad
where b.building_id = s.building_id(+)
and s.building_id is null
and r.route_id=b.route_id
and (nvl(b.residential_delivery_points,0) > 0 OR nvl(b.commercial_delivery_points,0) > 0)
and r.delivery_office_id=d.delivery_office_id
--and r.delivery_office_id=303
and D.POST_TOWN_ID=P.post_town_id
and ad.building_id=b.building_id
and ad.sub_building_id is null
and nvl(b.invalid, 'N') = 'N'
and nvl(b.derelict, 'N') = 'N'
union
select
p.name,
d.name ,
b.route_id ,
r.name ,
b.building_id ,
s.sub_build_id ,
NVL(s.sequence_no,b.sequence_no),
b.personal_name ,
ad.addr_line_1||' '||ad.addr_line_2||' '||ad.addr_line_3||' '||ad.addr_line_4||' '||ad.addr_line_5,
b.building_use,
rtrim(replace(b.comments,chr(10),'')),
b.east,
b.north
from t_buildings b,
(select * from t_sub_buildings where nvl(invalid,'N') = 'N') s,
t_routes r,
t_delivery_offices d,
t_post_towns p,
t_address_model ad
where s.building_id = b.building_id
and r.route_id = s.route_id
and (nvl(b.residential_delivery_points,0) > 0 OR nvl(b.commercial_delivery_points,0) > 0)
and r.delivery_office_id=d.delivery_office_id
--and r.delivery_office_id=303
and D.POST_TOWN_ID=P.post_town_id
and ad.building_id=b.building_id
and ad.sub_building_id = s.sub_build_id
and nvl(b.invalid, 'N') = 'N'
and nvl(b.derelict, 'N') = 'N'
union
select
p.name,
d.name,
b.route_id ,
r.name ,
b.building_id,
s.sub_build_id ,
NVL(s.sequence_no,b.sequence_no) ,
b.personal_name ,
ad.addr_line_1||' '||ad.addr_line_2||' '||ad.addr_line_3||' '||ad.addr_line_4||' '||ad.addr_line_5 ,
b.building_use,
rtrim(replace(b.comments,chr(10),'')),
b.east,
b.north
from t_buildings b,
(select * from t_sub_buildings where nvl(invalid,'N') = 'N') s,
t_routes r,
t_delivery_offices d,
t_post_towns p,
t_localities l,
t_localities lo,
t_localities loc,
t_tlands tl,
t_address_model ad
where s.building_id = b.building_id
and s.route_id is null
and r.route_id = b.route_id
and (nvl(b.residential_delivery_points,0) > 0 OR nvl(b.commercial_delivery_points,0) > 0)
and r.delivery_office_id=d.delivery_office_id
--and r.delivery_office_id=303
and D.POST_TOWN_ID=P.post_town_id
and ad.building_id=b.building_id
and ad.sub_building_id = s.sub_build_id
and nvl(b.invalid, 'N') = 'N'
and nvl(b.derelict, 'N') = 'N';
commit; Edited by: Krithi on 16-Jun-2009 01:48
Edited by: Krithi on 16-Jun-2009 01:51
Edited by: Krithi on 16-Jun-2009 02:44This link is helpful alright..but as a beginner, it is taking me too long to understand..But I am going to learn the techniques for sure..
Fo the time being,I am pasting my explain plan for the above query here, so that I hope any expert can really help me on this one..
STATEMENT_ID TIMESTAMP REMARKS OPERATION OPTIONS OBJECT_NODE OBJECT_OWNER OBJECT_NAME OBJECT_INSTANCE OBJECT_TYPE OPTIMIZER SEARCH_COLUMNS ID PARENT_ID POSITION COST CARDINALITY BYTES
06/16/2009 09:33:01 SELECT STATEMENT CHOOSE 0 829,387,159,200 829,387,159,200 3,720,524,291,654,720 703,179,091,122,042,000
06/16/2009 09:33:01 SORT UNIQUE 1 0 1 829,387,159,200 3,720,524,291,654,720 703,179,091,122,042,000
06/16/2009 09:33:01 UNION-ALL 2 1 1
06/16/2009 09:33:01 HASH JOIN 3 2 1 11,209 87,591 15,853,971
06/16/2009 09:33:01 FILTER 4 3 1
06/16/2009 09:33:01 HASH JOIN OUTER 5 4 1
06/16/2009 09:33:01 HASH JOIN 6 5 1 5,299 59,325 6,585,075
06/16/2009 09:33:01 VIEW GEO2 index$_join$_006 6 7 6 1 4 128 1,792
06/16/2009 09:33:01 HASH JOIN 8 7 1 5,299 59,325 6,585,075
06/16/2009 09:33:01 INDEX FAST FULL SCAN GEO2 POST_TOWN_NAME_I NON-UNIQUE ANALYZED 9 8 1 1 128 1,792
06/16/2009 09:33:01 INDEX FAST FULL SCAN GEO2 POST_TOWN_PK UNIQUE ANALYZED 10 8 2 1 128 1,792
06/16/2009 09:33:01 HASH JOIN 11 6 2 5,294 59,325 5,754,525
06/16/2009 09:33:01 TABLE ACCESS FULL GEO2 T_DELIVERY_OFFICES 5 ANALYZED 12 11 1 7 586 10,548
06/16/2009 09:33:01 HASH JOIN 13 11 2 5,284 59,325 4,686,675
06/16/2009 09:33:01 TABLE ACCESS FULL GEO2 T_ROUTES 4 ANALYZED 14 13 1 7 4,247 118,916
06/16/2009 09:33:01 TABLE ACCESS FULL GEO2 T_BUILDINGS 1 ANALYZED 15 13 2 5,265 59,408 3,029,808
06/16/2009 09:33:01 TABLE ACCESS FULL GEO2 T_SUB_BUILDINGS 3 ANALYZED 16 5 2 851 278,442 3,898,188
06/16/2009 09:33:01 TABLE ACCESS FULL GEO2 T_ADDRESS_MODEL 7 ANALYZED 17 3 2 3,034 1,582,421 88,615,576
06/16/2009 09:33:01 NESTED LOOPS 18 2 2 10,217 1 189
06/16/2009 09:33:01 NESTED LOOPS 19 18 1 10,216 1 175
06/16/2009 09:33:01 HASH JOIN 20 19 1 10,215 1 157
06/16/2009 09:33:01 HASH JOIN 21 20 1 6,467 80,873 8,168,173
06/16/2009 09:33:01 TABLE ACCESS FULL GEO2 T_ROUTES 11 ANALYZED 22 21 1 7 4,247 118,916
06/16/2009 09:33:01 HASH JOIN 23 21 2 6,440 80,924 5,907,452
06/16/2009 09:33:01 TABLE ACCESS FULL GEO2 T_BUILDINGS 8 ANALYZED 24 23 1 5,265 59,408 3,029,808
06/16/2009 09:33:01 TABLE ACCESS FULL GEO2 T_SUB_BUILDINGS 10 ANALYZED 25 23 2 851 278,442 6,125,724
06/16/2009 09:33:01 TABLE ACCESS FULL GEO2 T_ADDRESS_MODEL 14 ANALYZED 26 20 2 3,034 556,000 31,136,000
06/16/2009 09:33:01 TABLE ACCESS BY INDEX ROWID GEO2 T_DELIVERY_OFFICES 12 ANALYZED 27 19 2 1 1 18
06/16/2009 09:33:01 INDEX UNIQUE SCAN GEO2 DELIVERY_OFFICE_PK UNIQUE ANALYZED 1 28 27 1 1
06/16/2009 09:33:01 TABLE ACCESS BY INDEX ROWID GEO2 T_POST_TOWNS 13 ANALYZED 29 18 2 1 1 14
06/16/2009 09:33:01 INDEX UNIQUE SCAN GEO2 POST_TOWN_PK UNIQUE ANALYZED 1 30 29 1 1
06/16/2009 09:33:01 MERGE JOIN CARTESIAN 31 2 3 806,976,583,802 3,720,524,291,567,130 703,179,091,106,188,000
06/16/2009 09:33:01 MERGE JOIN CARTESIAN 32 31 1 16,902,296 73,359,971,046 13,865,034,527,694
06/16/2009 09:33:01 MERGE JOIN CARTESIAN 33 32 1 1,860 1,207,174 228,155,886
06/16/2009 09:33:01 MERGE JOIN CARTESIAN 34 33 1 1,580 20 3,780
06/16/2009 09:33:01 NESTED LOOPS 35 34 1 1,566 1 189
06/16/2009 09:33:01 NESTED LOOPS 36 35 1 1,565 1 175
06/16/2009 09:33:01 NESTED LOOPS 37 36 1 1,564 1 157
06/16/2009 09:33:01 NESTED LOOPS 38 37 1 1,563 1 129
06/16/2009 09:33:01 NESTED LOOPS 39 38 1 1,207 178 12,994
06/16/2009 09:33:01 TABLE ACCESS FULL GEO2 T_SUB_BUILDINGS 17 ANALYZED 40 39 1 851 178 3,916
06/16/2009 09:33:01 TABLE ACCESS BY INDEX ROWID GEO2 T_BUILDINGS 15 ANALYZED 41 39 2 2 1 51
06/16/2009 09:33:01 INDEX UNIQUE SCAN GEO2 BUILDING_PK UNIQUE ANALYZED 1 42 41 1 1 31
06/16/2009 09:33:01 TABLE ACCESS BY INDEX ROWID GEO2 T_ADDRESS_MODEL 25 ANALYZED 43 38 2 2 1 56
06/16/2009 09:33:01 INDEX UNIQUE SCAN GEO2 MODEL_MODEL2_UK UNIQUE ANALYZED 2 44 43 1 1 1
06/16/2009 09:33:01 TABLE ACCESS BY INDEX ROWID GEO2 T_ROUTES 18 ANALYZED 45 37 2 1 1 28
06/16/2009 09:33:01 INDEX UNIQUE SCAN GEO2 ROUTE_PK UNIQUE ANALYZED 1 46 45 1 1
06/16/2009 09:33:01 TABLE ACCESS BY INDEX ROWID GEO2 T_DELIVERY_OFFICES 19 ANALYZED 47 36 2 1 1 18
06/16/2009 09:33:01 INDEX UNIQUE SCAN GEO2 DELIVERY_OFFICE_PK UNIQUE ANALYZED 1 48 47 1 1
06/16/2009 09:33:01 TABLE ACCESS BY INDEX ROWID GEO2 T_POST_TOWNS 20 ANALYZED 49 35 2 1 1 14
06/16/2009 09:33:01 INDEX UNIQUE SCAN GEO2 POST_TOWN_PK UNIQUE ANALYZED 1 50 49 1 1
06/16/2009 09:33:01 BUFFER SORT 51 34 2 1,579 60,770
06/16/2009 09:33:01 INDEX FAST FULL SCAN GEO2 LOCAL_COUNTY_FK_I NON-UNIQUE ANALYZED 52 51 1 14 60,770
06/16/2009 09:33:01 BUFFER SORT 53 33 2 1,846 60,770
06/16/2009 09:33:01 INDEX FAST FULL SCAN GEO2 LOCAL_COUNTY_FK_I NON-UNIQUE ANALYZED 54 53 1 14 60,770
06/16/2009 09:33:01 BUFFER SORT 55 32 2 16,902,282 60,770
06/16/2009 09:33:01 INDEX FAST FULL SCAN GEO2 LOCAL_COUNTY_FK_I NON-UNIQUE ANALYZED 56 55 1 14 60,770
06/16/2009 09:33:01 BUFFER SORT 57 31 2 806,976,583,788 50,716
06/16/2009 09:33:01 INDEX FAST FULL SCAN GEO2 TLAND_COUNTY_FK_I NON-UNIQUE ANALYZED 58 57 1 11 50,716 -------------------------------------------------------------
Edited by: Krithi on 16-Jun-2009 02:47 -
Solution Manager Enterprise Edition upgrade slow
Hi
I am performing SOMAN 7.0 upgrade to Enterprise edition by upgrading kernel 701 and SP stack 18. I have already upgraded the kernel and java stack and now in the process of upgrading ABAP. I am expereincing really slow performance of this upgrade. I have checked tp and R3trans version which is uptodate as I updated kernel. I cant see any problem with CPU utilization as well swapping. I checked the SLOGs and there are no alerting errors. I see its moving and its very slow. I am just wondering if any of you guys experienced this - is this normal since this is a upgrade?Thanks a lot, i realize the installation following the standard add-on installation procedure!
Now i have the ST-ETP
ST 400 0024 SAPKITL434 SAP Solution Manager Tool
ST-A/PI 01M_CRM570 0000 - Application Servicetools for CRM 500 - 7
ST-ETP 100 0000 - SAP Solution Manager Enterprise Edition
ST-ICO 150_700 0025 SAPK-1507PINSTPL SAP Solution Manager Implementation Cont
ST-LV 100 0001 SAPK-10001INSTLV SAP Landscape Verification Wizard
ST-SER 701_2010_1 0002 SAPKITLOS2 SAP Solution Manager Service Tools
Then don't forget to perform step 5. After the installation steps.
Step 5 says this:
5. After the installation
To activate SAP Solution Manager Enterprise Edition, the Enterprise Addon SM_APPLM has to be activated in the IMG of the Solution Manager System. This is done via IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate Solution Manager Enhancements.
a) In the case of ST-400 SP15-SP17
To use Extended Tracebility in Change Request Management activate BC-Set SOLMAN40_CHARM_CONTEXT_001 in transaction SCPR20
b) In the case of ST-400 SP18 or higher
The activation of BC-Set SOLMAN40_CHARM_CONTEXT_001 will be done automatically.
In my spro i don't have this options->
I see the route Activate Solution Manager Enhacements in SPRO -> Cross Scenario Settings
And in enterprise extension I only see ( SM_CRON, SM_QC_AD, SM_SSP,SM_SUPP_VAR)
I guess that this in SP24 is done automatically, but you said, that don´t forget the step 5 after installation.
update:I check for updates of SP and this add-on don´t have SP for now -
Photoshop Elements 12 runs really slow and is almost unusable.
Photoshop (and Premiere) Elements 12 runs really slow and is almost unusable.
All other high end software works perfectly including 3D rendering software.
27" iMac mid 2011.
16gb of RAM.
Over 100gb free hdd space.
Radeon HD card 2GB.
3.4 GHz Intel Core i7.
I have tested on tiny low quality images as well.
I bought this with the bundled Premiere Elements which is also unusable even with the smallest and lowest quality video file.
iMovie works fine as does other video editing software. I ONLY have an issue with Photoshop and Premiere Elements 12.
Mavericks 10.9.3
Elements 12.1After the latest update, Firefox is much better. Using it again.
-
I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ? I had to re-connect my iMovie t
USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
OWC have a few different ones for sale.
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
Do you also connect the external USB drive to the AC power as well while you use it ?
Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
Stewie
Message was edited by: stewiesno1 -
Universe results in BOE XI 3.1 really slow compared to BOE XI R2
Hello,
Our system is BOXI 3.1 fp 1.6 installed on a Windows Server 2003 Standard Edition SP2 (3,5 GB RAM). The database that we are using is Oracle 10g (production system).
We are geting really slow results in one universe in BOE XI R3.1 compared to the same universe in BOE XI R2 (We have migrated this universe from BOE R2)
In BOE R2, in order to get the results it takes between 10 seconds and 1-2 minutes, but the same query, in BOE R3.1 it varies from 1 minute to 15 minutes, and it's not always the same time.
The first time it takes less time compared to other requests in order to get the results, and the query gets all the cpu from the server.
I have tried to optimize the table, using indexes and so on, but we have the same results in BOE R3.1
We are quering a big table (about 300-350.000 registers) that is partitioned by date.
I have tried to analyze the query that produces BO, and if I run the query in a query tool (like toad), it takes about 5-10 seconds in order to get ALL the results
Any way to solve this? Thank you.Hi Seb,
This is not working. I tried the same in one of the Test ID (This is an Enterprise Account).
But i am getting the message "Account information not recognized: Access is denied" in the CMC login page.
I logged in via Administrator and verified the Test ID. The account is enabled.
Please any help.
Thank you.
regards,
Kiruba v.r. -
Safari being REALLY slow or sometimes "Cannot find server"! HELP!
Right, i have the new 'Safari 4' but its being really slow.
When trying to load up webpages, it sometimes takes AGES to load a page, or sometimes it even comes up with the message 'Safari cannot find the server'.
I have 'LittleSnitch' installed so I can see when Safari is using the internet to either upload or download information and most of the time, Safari is sat there doing nothing and not downloading any information...
I have reset Safari to no avail!
Why might this be happening?
Message was edited by: Ozzmystro'Safari cannot find the server'
Generally refers to a DNS problem.
(First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl.)
Adding DNS codes to your Network Settings, should gives good results in terms of speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.222
208.67.220.220
(An explanation of why that is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
This is Apple's guidance on iPv6:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
Click on Apply Now and close the window.
Restart Safari, and repair permissions.
Maybe you are looking for
-
CD/DVD drive is no longer working on my HP Pavilion Slimline s3720y desktop
Hi! I am having problems with my HP desktop computer and wonder if someone can help me solve this issue. My CD/DVD drive is no longer working on my HP Pavilion Slimline s3720y desktop. When I tried to test my CD/DVD drive to ensure it it was worki
-
I can no longer connect my N86 to my PC to sync th...
It just won't connect to the computer. I click to connect my device (on Ovi) and it says to connect using the USB lead then it says it doesn't recognise and to try again. Please help, I have loads of photos on the phone now and I want to download the
-
Business areas financial statement
Hi, When business area wise financial statements are required and are mandatory for all accounts, then how business area will it be assigned to the accounts with automatic postings (post automatically)?
-
"Selective palette Error..." upon quitting PS CC
Hi. Am using PS CC 2014.2.2 Release. On quitting the software, I keep getting this box pop-up, stating ... Selective palette Error XML parsing error: "no element found" at line 1 I have no idea what this is. How do i resolve this? Thank you.
-
Signature of sender not appearing
Hello -- I've received PDFs I need to print. But the sender's signature is not appearing properly. Instead, the signature pain shows digital information related to the sender's signature -- not an image of the signature itself. How do I get the se