Multicam editing in premier pro cc 2014, problem with one camera display size

Although the clip works fine in a sequence all by itself in multicam editing it is much too large and only a portion displays. The other camera is fine. The clips are from different types of cameras 1 is a DSLR, it displays too large, the other is a Sony PD 1570, a pro videocam that uses tape, it displays fine.

Have your tried re-ingesting the media. It's possible the file(s) are corrupt. I run into this on occasion, especially if the results shows up in the render (which is a dead give-away to file corruption) and re-ingesting fixes it.
It's also possible that the drive the file resides on has issues as well. Are you using a raid? We need more information regarding the specs of your machine and process.

Similar Messages

Premiere pro CC (2014) problems with audio on .mts files

Hi,
This is a recent problem I have been having when trying to play certain clips in Premiere Pro CC (2014), I import the entire private folder and some of the clips play as normal and others seem to have skipping audio. This causes the second half of the clip to not have any audio in it at all because it is bunched up at the beginning. I don't even know where to start with trying to fix the problem, the only thing I have done is re import the files and put them in new folders to change the destination it has been imported from.
Any advice would be extremely helpful as it is mostly stopping me from getting on with any work,
Thanks!

Hi amber1992,
I will suggest you to go ahead and clean the Media cache and Media cache files folders manually.
MAC OS: Click on Go menu>Go to Folders>type ~/Library and click ok. This will open User Library folder and then navigate to Application Support>Adobe>Common>Media Cache and Media Cache files. Delete all the files from these folders.
Windows: C:\Users\username\AppData\Roaming\Adobe\Common or you can Click on Start button and in search type %appdata% and open Roaming folder>Adobe>Common>Media Cache and Media Cache files.
Once done launch the project again and check.
Regards,
Vinay

Premiere pro cc 2014 problems with audio

I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
Anyone else experience the same problems?

Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

Adobe Premier Pro CC 2014 closes with no error message after opening project

PC Spc:
OS:Windows 8.1 64-bit
Processor:Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
Ram: 2x 4GB Samsung 1600MHz
GPU:NVIDIA GeForce GTX 760
please help

abradders100 wrote:
I have a PrPr project on an external GTech drive connected via USB which ran fine on my old MBP in PrPr CC 2014. When I open this project on the new MBP I cannot render or export without getting error message "Video Preview Error; Error Unknown."
If I'm reading this correctly, it sounds like the project file was created on your previous MBP, and saved to that external USB (hopefully 3.0?) drive. Is that correct? Where did you have the media, scratch, etc files located on that previous MBP? I'm wondering if Pr on the new MBP is tripping over itself trying to find other data that it might need?
Also when the Warp Stabilizer effect is applied, it generates black lines across the video in the program window. This happens when using either Mercury Playback Open CL and/or Cuda. However if I switch to Mercury Playback Software only, everything is fine but of course much slower. In addition, if I remove the effects from the sequence: Warp Stabilizer and auto colour and levels, the sequence exports fine regardless of whether Mercury Playback Open CL and/or Cuda or Software only.
What about other accelerated effects? Can you apply any of them individually without getting black lines in the program window? Further, have you tried installing the previous version of Pr CC to see if the same issues exist? You'd have to create a new Pr project, as the 2014 project files aren't backward compatible. But it might be interesting to see if you're experiencing the same problems with the older Pr.

Adobe premiere pro cc 2014 problem with Yanobox Motype

My premiere pro always freezes when I'm trying to type a title in Yanobox Motype.
Please help me.

Locked... duplicate discussion... see GTX 970 and Premiere Pro

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of a solution." When I used the trial I never received this message. Now after purchasing it I receive this error each time I open PP and am unable to use. it. Any ideas or support to fix this issue?

What does the detailed crash report say?
And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

Premier Pro CC 2014 crashing, wasting enormous time, not able to load files into previous rev - this is crazy!!!

SOMEONE AT ADOBE PLEASE HELP!!!
I have had no problems editing Red Epic 4K R3D files in the past revisions of Premier CC but ever since creative cloud updated me to the latest Premier CC 2014 (8.0.1) I cant get any serious work done as my system is crashing on startup, or after a few minutes of work, freezing on playback at times, giving me artifacts at times and is just a miserable and frustrating experience I can get NOTHING done with!!!
How could Adobe release a piece of so called professional software like this with these now obvious MAJOR issues so many of us are experiencing, wasting massive time and money for all of its users and how can I get this running properly and stable as our livelihoods depend on this software to work and thats what we pay Adobe for ???
I am currently working on :
Mac OSX 10.9.3
Mac Pro 5,1 Tower
Nvidia GTX 660 2GB Graphics card
Cuda Drivers 6.0.37
I use a SSD swap drive and boot drive of 1/2 TB
I have a 6TB internal Raid for all my media files
I am editing 4K Red R3D files in a 4K timeline that I had no problem editing in previous version of Premier CC ???
If Adobe would have thought before changing the file compatibility with the new Premier Pro CC 2014 where you cant load a file updated to this new version back into Premier Pro CC previous revision or included some kind of import / export to and from previous versions I think we would all at least be operational again right now until Adobe can fix its errors in this new revision but they obviously didn't care to think about compatibility, safeguards for users and just adding more new features with a new file format in a buggy piece of software?
I have wasted days now on trying to solve these problems following other users in this forums suggestions including the following listed below:
• Reinstalled my OS downgrading to 10.9.3 originally thinking it was something OS related since I updated to 10.9.4 around the same time this all started happening
• Uninstalled / reinstalled Premier Pro CC 2014
• I have updated my permissions to read/write on my main user account on the Adobe Library files
• I have updated my permission to read/write on my main user account on my overall drive
• I have reverted my CUDA drivers back one revision as these were recently updated as well
I AM TIRED AND FRUSTRATED WITH ALL OF THIS NONSENSE WHEN I JUST NEED TO EDIT SO CAN SOMEONE AT ADOBE PLEASE SHED SOME LIGHT ON ALL OF THIS AND GET ME BACK TO A PLACE WHERE I CAN USE THE SOFTWARE I PAY FOR AND NEED TO BE ABLE TO WORK WITH TO KEEP MY BUSINESS OPERATING AND COMPLETE THE WORK MY CLIENTS ARE WAITING FOR ???
Originally I was very impressed with Adobe CC and Premier CC once I started to work with it after many years of abandoning the use of Premier as a Final Cut Pro 7 user but later decided to try Adobe again when Apple abandoned its pro base with the original Final Cut X. I also did not think this new cloud software model was all that bad over the old boxed method. This was all also before the big Final Cut Pro X update in December 2013/early 2014 where Apple appears to be back to support the real Pros but I have stuck with Adobe CC and Premier CC and been happy since that time. Now I am wondering if this was wise as I have had a number of other issues with other CC Apps, updates, etc and this is starting to feel like Creative Cloud is becoming a big, sloppy, buggy mess to me?

Also...
Add to right click menu of timelines an entry for "go to next keyframe" and "go to last keyframe" a la After Effects, we should also be able to assign a kb shortcut to this.
There are buttons on either side of the create keyframe button to advance forward or backward in the effects control panel or timeline.
You can also advance forward or backward in the effects control window by holding shift while dragging the playhead.
Allow copy/paste of selection of audio/video effects, not just one at a time. Sure we can copy/paste attributes but since we can also copy/paste effects it would only make sense to allow to copy/paste a selection of effects.
I guess I don't get this one. If I have 5 effects on a clip, I can simply command-click on the ones I want to copy over to the other clip.

Premier Pro CC 2014 crashing

Ever since I moved a project to a new RAID 0 array, premier pro cc 2014 crashes within 20-30 seconds. If I open the the project in the old location, no problems.
In looking at the Windows Application log, the error shows a a faulting module that is different each time, but generally it says:
Faulting application name: Adobe Premiere Pro.exe, version: 8.0.1.21, time stamp: 0x53c7b17f
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000005
Fault offset: 0x0000000000018e5d
Faulting process id: 0x19b4
Faulting application start time: 0x01cfbd3b5c4fbe76
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: f91568db-2930-11e4-836f-90b11c7e12af
I have attempted a direct copy of project to new location, and also restoring the project from a backup application
Files and Folders count are matching between old and new location
System:
Dell Precision T7600
32GB RAM
Windows 7 64 bit
Video Card: NVIDIA Quadro 4000
Running latest version of Premier Pro CC 2014

Windows Update shows "No important updates available". There are 5 optional updates available related to a RealtekUSB3 Card Reader and three updates to Remote Desktop that allows Windows 7 to have Windows 8 Remote Desktop functionality. Most recent check for updates was at 5:44am this morning, and last updates were installed 8/15/2014.

I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages fra

I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages frame rates are 29.97 and i have set timeline to 25 FPS is requirement by client. kindly revert. Thanks

Thanks Richarad ..It has solved the problem but still crashes some times .As the programme has the break (bumper)after every five minutes ,i hope it will not compress bumper time too after export.

My nested clips in Premier Pro CC 2014 are performing unpredictably.

Back in July I had some issues with Premier Pro CC 2014 (my projects would suddenly stop rendering due to an unknown error). I stopped using Premier Pro CC 2014 and went back to the previous version.
I am once again giving Premier Pro CC a try, but I am experiencing oddity after oddity with it.
My latest issue is with nesting layers. I have a small animation of dials going around a clock face. It looks fine layered on my timeline. When I nest the three elements, I can watch a few frames and then all I get is a black screen.
I'm well versed in nesting and I know my layers are fine. No filters or settings have been applied that could possibly make my nested sequence suddenly fall to black midway through.
Has anyone else experienced something similar with their nested sequences?
I'd love to hear any feedback you might offer!
Regards,
Len

Yeah, I've noticed that Premiere treats it's multicam clips in more unique way now, they used to more or less be nested sequences. It seems like whatever changes they were trying to make, they were only half built.
Having your project in a single folder is good practice in the future, too, though. It keeps projects contained, especially if they need to be handed off to other editors or stored long-term.
I usually divide my folders into:
assets
footage
exports
project files
other
and everything comes out pretty neat and organized.
Cheers!
Jason

Can't install Premier Pro CC 2014 on my MacPro

I have been trying to install Premier Pro CC 2014 on my MacPro, but it always stops at 42% and asks me to close PhotoshopServer.
The first time this happened I opened Activity Monitor, found that process and ended it with a Quit/Force Quit.
When I hit Retry on the installer, it immediately asks me again to close PhotoshopServer.
Problem is, it is no longer running. Doesn't show up in the active process list. Doesn't show up in search.
Tried restarting and going through it all again, with same result.
Haven't had any problems with any of the other CC 2012 installs.
Any suggestions?
Thanks,
Mark

Hi Jeff,
I have nine network drives that launch from my Login Items, but nothing else.
Thought there might be a firewall issue but had the same problem with it off.
M.

DirectLink from Premier Pro CC 2014 to Encore - no longer there

Trying to get a Premier Pro CC 2014 sequence into Encore CS6 - and it won't happen.
The DirectLink from Premier Pro CC 2014 to Encore - is no longer there and I've tried simply dragging the required sequences over from the PP CC window into the timeline bin in Encore - it won't do it.
I've tried importing sequences and after clicking on the project to open and select the sequences from it just sits there with a portion of yellow progress bar about 5mm long - doesn't move on.
I am now trying to build the DVD project by putting all materials on one sequence, with chapter markers on it and pushing out a media encoder file in H.264 first. Maybe this will import to Encore.
Hating the fact these two sister programs no longer talk or work together - losing Encore is a major headache.

Thanks Stan,
Interesting you say "Dynamic link only works between like versions. So the only DL for Premiere with Encore CS6 is Premiere CS6" and then show me a video where the guy's first screen pops up with "Using Premiere Pro CC & Encore CS6".
This is the latterday workaround to cover the issue of the removal of the directlink from PP CC 2014 to Encore - which does cover my issue - however I find it strange that Adobe choose to make great play of the DirectLink facility - now employed between programs such as PP CC 2014 and SpeedGrade - yet have deliberately destroyed a great working relationship in the same manner between PP CC 2014 and Encore.
I find this "dictatorial" deduction a real nause...

Film Touch Pro 2 Plugin Not Installing on Premier Pro CC 2014

Just paid for and downloaded "Film Touch 2 Pro" from Pixelan via the Adobe site. Installed as directed but the plugin in is not available in my version of Premier Pro. I am running the latest version of Premier Pro CC (2014) is this compatible with this version????
Any help would be appreciated thanks.
Paul Smith

I was not aware you could get plugins from a Adobe Site. Could you give a link.
It should run in nearly all versions.
If it does not work you have to contact Pixelan.
Do you see the plugin in the Plugins folder of Premiere (Program Files)?

The latest Premier Pro CC 2014 update forced me to convert and create version of my project while guaranteeing that the project would not be altered; however, the timelines are not the up to date versions I had.

The latest Premier Pro CC 2014 update forced me to convert and create version of my project while guaranteeing that the project would not be altered; however, the timelines/sequences are not the up to date versions I had. I saved different version of this project for various purposes, but they were all named differently(i.e joe and mary wedding, joe and mary wedding 2, joe and mary wedding 3, joe and mary wedding 3.1). I do not know if they just pulled the timelines from the earliest version, eradicated the data entirely, or something else.
Since the program prompts me to create and save a new version for the updated premier, I still have the previous projects, but cannot open them. I imagine they are unchanged, but cannot be sure.
Thoughts? Is it possible to uninstall an update re-install it later?
Please advise.
Thank you.
Brian

Also...
Add to right click menu of timelines an entry for "go to next keyframe" and "go to last keyframe" a la After Effects, we should also be able to assign a kb shortcut to this.
There are buttons on either side of the create keyframe button to advance forward or backward in the effects control panel or timeline.
You can also advance forward or backward in the effects control window by holding shift while dragging the playhead.
Allow copy/paste of selection of audio/video effects, not just one at a time. Sure we can copy/paste attributes but since we can also copy/paste effects it would only make sense to allow to copy/paste a selection of effects.
I guess I don't get this one. If I have 5 effects on a clip, I can simply command-click on the ones I want to copy over to the other clip.

I need help! I am trying to export my video to a DVD format on my Premier Pro CC 2014, but the MPEG2 - DVD format is missing from my presets!?

I already updated my Premier Pro CC 2014, updated my Adobe Media Encoder 2014, and still both do not have the MPEG 2 - DVD preset on them. Is there anyway I can download the presets somewhere and just import those presets to my Premier Pro? I have no idea how to fix this. Can anyone help?

Missing Presets/Activation http://forums.adobe.com/thread/1050730?tstart=0 may help
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Multicam editing in premier pro cc 2014, problem with one camera display size

Similar Messages

Maybe you are looking for