Multicam Editing Problem during Export Pr CC

Hey guys, first post.
i have been working on a pretty long multicam project (About 1h45m) in Premiere Pro CC
I was all done, and during export in Media Encoder i noticed that after about 45m of rendering, the preview window was still showing the beginning of the video. Upon further inspection, i noticed that the video appeared to be Looping. Sencing that something was wrong, i cancelled my render and reopened my project.
when the project reopened i could see that after a couple of edits, there were little white triangles and the top of the clips. I need to stress that before i started rendering, these triangles where not there.
And yes, when i played through my sequence, at every edit (camera change) the multicam clip would play from the beginning again. i have tried to remove everything after where this problem occurs and then drag the footage out. It does allow me to do edits again and it works fine, but i dont really want to spend hours doing it again, not understanding what the problem is and run the risk of it messing up again.
I am so very confused as to what is going on so any help at all would be awesome. Its very frustrating to work on something for so long and it fail during export.
I will attach an image showing a glimpse of what my problem is. (Please excuse the camera work)
Thanks again
Dan
Specs.
2012 iMac 
Processor  3.1 GHz Intel Core i7
Memory  8 GB 1600 MHz DDR3
Graphics  NVIDIA GeForce GT 650M 512 MB
Software  OS X 10.9.1 (13B42)

The triangles indicate hard media boundaries -- there are no more frames available from the source clip beyond that frame.  If you don't have a triangle on a clip at an edit point, then the source media has frames available beyond the in or out point of that clip instance on the timeline.
There are a few things that might cause what you're seeing, so I recommend you check your multicam source sequence to make sure that it's referencing the correct media, and that all the media in your project points to the correct files on disk.  Double- and triple-check that all the clip instances in the timeline point to the correct sequence or media.  If the problem is related to clips on the timeline not pointing to the right thing, you could save yourself some work by trying to fix that instead of re-creating your edits.  You should also see if you have any Auto-Saved projects that don't have the triangles at the edit points and that play the edited sequence correctly -- you could save yourself even more work.
Cheers,
Jeff

Similar Messages

  • Premiere Pro 7.1 serious Multicam Editing problems

    Hello, I am posting here because the bug report I filed one week ago to Adobe didn't give a result -no response at all from the bug department.
    I have two serious Multicam Editing Problems.
    PC Configuration: Core i7950, Asus P6TD Deluxe, 12GB DDR3 1600MHZ, Quadro K4000, SSD for the system, Seagate Constellation 7200rpm for video editing.
    1. When multicam mode is on at the program monitor, I press play and the program doesn't respond at all. The timeline plays till the end and the program just doesn't let you do anything but wait until playback of the whole timeline is over. Then the program works again (no "not responding" message in Windows).
    2. Sometimes the waveform doesn't even appear at the multicam audio clip. I read in other forums that this problem is found specifically at Premiere Pro version 7.1 (October release).
    I would be grateful with your help.
    Thank you,
    Stavros Symeonidis

    The media is always a combination of HD .MOV (dSLR footage and .MTS (from my Sony Vg-30). However, I also tested it with .mpeg files created by "match sequence settings". GPU acceleration is always on, as I use nVidia Quadro K4000 with the latest drivers (331.82).
    I always create the multicam sequences manually and the problem occurs with any amount of camera angles.
    The problem was not solved by reinstaling Windows (7 and 8). In general, I have no other issue with my PC system, except from this specific one.
    It doesn't appear always, however it will definitely happen if you press twice or three times the letter L, to fast forward the preview of your Multicam Sequence.
    I remind you that this only happens when multicam monitor is toggled at the program monitor.
    Did all these help at all to even reproduce this situation?
    Thank you,
    Stavros Symeonidis

  • Multicamera edit problem in Premiere Pro CC

    I have a multicamera edit project, the source and target timelines are set up as required.  I've performed the multicamera edit and saved the file.  When I open the saved file, only one track in the source file shows up in the target sequence.  All tracks in the source sequence are visible, the file was saved exactly as it was when the multicamera edit was performed.  It looks like a bug to me.
    Steve Keller
    Differential Films

    I just updated to the latest CC, and it looks like the problem has been fixed!
    Thanks.

  • Multicam editing problems with RT

    I am having an issue in Final Cut Pro with editing with the multi-cam editor. We are us-ing a G5 Quad with 4.5 GB of Ram. We selected 4 clips from the Browser, control clicked and chose "make multiclip". Then dragged the Multiclip in to the viewer window, or double clicked it to get it there. Dropped the multiclip to the timeline. Played the Clip, and chose our views in real-time. The video on the Canvas cuts out when we made a new selection. There were cuts made, but they did not show up in the browser. Then we had to play the clip back to get the cuts to show up. I know this is not how it is supposed to work. With the Lesson files in the Final Cut Pro book, you are able to cut and see the edits in real time. I have also seen this done on a less powerful machine than what we are using. Also I have the RT set to Unlimited, and Dynamic. Any Suggestions?

    What do you mean with "There were cuts made, but they did not show up in the browser"? The cuts are not supposed to show up in the browser. Did you mean the timeline (your sequence)?
    Have a look at this excellent article at Ken Stone's Final Cut Pro Web Site
    The Essentials of Multicam Editing in Final Cut Pro, by Steve Martin

  • FCP Multicam Editing Problem, Not Saving

    i have been editing on final cut for several years now, but i have never had a problem like this. i am editing a wedding using the multicam function, but every time i hit the space bar to pause the sequence all of the marks for the cuts disappear and are not saved. the entire clip goes to which ever angle as selected last. if they is anyone who has experienced this and could help it would be appreciated, thanks.

    i have been editing on final cut for several years now, but i have never had a problem like this. i am editing a wedding using the multicam function, < </div>
    Welcome to the family.
    You're saying: A) you've been using multicam for several years or, B) this is your first use of multicam after all these years?
    The section in the manual is explicit and a bit confusing but following the step-by-step procedure is absolutely necessary the first few times so you figure out how the thing is supposed to work. I think it's weirdly non-intuitive but they didn't ask me.
    Remember also that multicam is an effect and will render. Once it renders, you must unrender to make additional edits. Needlessly adds to the confusion.
    bogiesan

  • Multicamera edit problem (another one)

    I am trying to do a 3-camera edit.  I created a sequence with the three shots lined up.  I then created a new sequence, nested the first sequence into this sequence, enabled multicamera, brought up the multicamera monitor, and began my edit.  Soon after, any attempts to play my project were met with "rendering required files" accompanied by a slowly moving yellow bar, and ending with . . . nothing.  The yellow bar reaches 100% and hangs there.  I can hit "cancel" and try it again, but the same thing happens repeatedly and I cannot get the project to play in real time.  I *can* scroll and manually make my edits that way, but cutting to the beat (which I'm trying to do) is out of the question.
    As an experiment, I created a third sequence, imported the first sequence again, and had the same experience.  I can get the project to play in the multicamera monitor and make some edits exactly once, but if I hit "stop," I have the same "rendering required files" issue if I try to play the sequence again.  I'm stumped.
    Windows Vista 64 bit
    CS 4.2.1
    4 megs memory
    Intel quad core processor (model is escaping me right now)
    I'll happily provide any other information that would help someone figure this out for me.
    J. D.

    I just updated to the latest CC, and it looks like the problem has been fixed!
    Thanks.

  • Multicam Editing Problems

    Hi!
    I am able to create a multicam clip, and when I double click it it drops to the timeline & appears in my Angles viewer. However, when I hover my mouse over the 3 different angles it doesn't change to the blade, nor does clicking the clips themselves seem to make any cuts.  In short, I have a multicam clip that I can set up but cannot edit. What am I doing wrong?? Have the Pro Manuals & watched many how to videos but I cannot tell what I'm doing differently.
    Any help appreciated!
    best,
    hotbrown

    Russ H wrote:
    ...  confused by the terminology. When one double-clicks a multi clip, the timeline it opens in is called ..
    (sorry for gettin' completely off-topic... : )
    I forgot to mention:
    "compounds are evil!"
    LOL!!
    No, MCs, as a special incarnation of compound, are great, I'm using them weekly, and it's one of the many time-saving marvels of FCPX.
    But indeed, those 'multi purpose timelines' can confuse, esp. when you're not knowing where you're actually are..
    And compounds confuse on top of that!!
    sorry JDHHotbrown for thread-jacking.. it's just some silly 'internal' joke here ...

  • Multicam editing problem

    I've been editing in multicam for a while. But recently when I play back the timline I cannot get the viewer to either play back the video so I can choose between cameras or it shows only the one Canvas shot duplicated on the viewer and does not have multiple angels. In switching to "open" it does not want to say and moves back to "sync off". This also happened before upgrading to 10.4.10.
    So now, I cannot edit in multicam.
    Any ideas?
    FCS 2

    First make sure the multicam clip is in the viewer.
    Then make sure that your timelines realtime is set for multicam.
    Then make sure the canvas is 'open'
    Then make sure the viewer is 'open'

  • Problem during export and data

    I have 60GB of mount point OS level but my estimated dumpfile size 150 GB.
    How i will take the back up of the database using Simple export and Datapump utility
    We are using Red hat Linux OS and database version 10.2.0.4
    I am new to oracle .
    Thanks
    sanjaya

    >
    I have 60GB of mount point OS level but my estimated dumpfile size 150 GB.
    How i will take the back up of the database using Simple export and Datapump utility
    >
    Yes, use RMAN for backups. This export won't let you restore everything if your database crashes after an hour your export finished. You would have lost an hour of data. With RMAN, it will take hardly 1/5th of the export time and it is reliable when recovery situation occurs.
    By the way, if you use traditional export (not the datapump), you can use pipe to compress the data as the data gets exported.

  • Multicamera Edit Problems

    I have 3 Camera edit, as soon I render, when I double click a segment it shows 3 cameras, but when I play it turns into the active one.
    Please help.

    If you've already color corrected and got a bunch of filters just the way you like them, you can save those settings by dragging them from the clips to your favorites bin. In there, you can separate them into folders based on what angle they're for, and then drag those folders to the appropriate clips after editing.
    You'll want to use the Find feature to select all clips from each angle at once, to add the filters after the edit.

  • When i use the blade tool to cut a clip in an angle during multicam editing, i can't move the clips afterwards. it's like they are stuck together. ?????? Thanks, Mircea

    when i use the blade tool to cut a clip in an angle during multicam editing, i can't move the clips afterwards. it's like they are stuck together. ??????
    Thanks, Mircea

    Hi,
    I'm using 10.0.7. It's like snapping won't turn off. Instead ,if i use the keyboard to nudge the clips, there's no problem. I am using that at the moment.
    1. when i try to drag
    2. when i nudge:
    3. snapping is off.
    Thanks,
    Mircea

  • Multicam editing in premier pro cc 2014, problem with one camera display size

    Although the clip works fine in a sequence all by itself in multicam editing it is much too large and only a portion displays.  The other camera is fine.  The clips are from different types of cameras 1 is a DSLR, it displays too large, the other is a Sony PD 1570, a pro videocam  that uses tape, it displays fine.

    Have your tried re-ingesting the media.  It's possible the file(s) are corrupt.  I run into this on occasion, especially if the results shows up in the render (which is a dead give-away to file corruption) and re-ingesting fixes it.
    It's also possible that the drive the file resides on has issues as well.  Are you using a raid?  We need more information regarding the specs of your machine and process.

  • Place sequence markers during multicam edit?

    Hello all,
    I'm looking to place sequence markers on the fly as I'm performing a multicam edit using a keyboard shortcut, but I can't figure out how to do so.  I'm editing a college lecture, so when the speaker says "next slide" while I'm switching cameras in multicam mode, I can place a sequence marker at the point where the PowerPoint slide should start and end.  It would  make it much easier later when I have to go back and drop in the  slides.
    Thanks.
    Mike Tomei

    Thanks for the link, Todd.  I just submitted a feature request.
    shooternz:  yes, I'm able to place the markers in the main timeline window containing the multicam enabled edit, but only after switching from the multicam window to the timeline window.  My goal is to place the markers on the sequence while I'm in the multicam window switching between my camera shots.  Trying to keep a good flow going, rather than have to stop switching cameras, click on the timeline window, place a marker, then get the multicam camera switching started again.  It would be great to just make a real time pass switching cameras and placing markers, then just have to go back and drop in slides at my marked points.
    Mike

  • CC 2014 multicamera audio problems

    Hi everyone!
    I read about some problems with multicamera but in this new version (CC 2014) is the first time I worked in multicamera and I'm having some trange problems with audio, and I dont know if it is a bug or something.
    I´m in a full HD 29,97 project with 3 cameras and because some audio effects and have in the source 2 audio tracks. In this áudio tracks I have some fade in/outs and
    most of the time just to normalize gain. I mean that somethimes theres is a "contínuos cut" in same track or not.
    When in multicamera mode, select main áudio (1 track result from the source 2 tracks) and after finish I insert some vídeo in some places and did some cuts.
    The problem is that when playing the final multicamera the áudio (that I didnt cut or edit) is no the same, in some situations, that is in the souce timeline.
    Per example, in source there is a situation with the end a playback music (áudio track 2) and when another clip came with somebody talking (áudio track 1).
    To reduce the cut evidence I "cross" the sounds with fade out (track 2) and a fade in (track 1) and at the source timeline everything fine. But in multicamera timeline
    that point of the áudio result in more "áudio" that dont belong to that point. In this example is a fade out/ fade in 30 frames crossed in diferente timelines and other sounds appear. Very strange!!!
    I did some test and if I just eliminate de fades the sound in multicamera is ok but notice that was a cut sound. So, I think that the fade in and fade outs in multicamera
    are the main responsables for this problem that apparently is some bug, dont you think?
    Now I have this problem to export with almost to hours and there are many situations like that one I refer like an example.
    Someone had this problem and know what is wrong?

    lgc, Moneel,
    You may try to uninstall, run the Cleaner Tool, and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html
    Otherwise, this may be one for this specialized forum (where you may be able find the answer from previous threads),
    http://forums.adobe.com/community/download_install_setup
    or for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
    http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
    or for Adobe Support (phone),
    http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

  • Problem during install ECC5 IDES

    Hi all,
    I've got a problem during install ECC5 on Windows 2003, MS SQL SERVER 2005.
    Here is the error message
    (DB) INFO: PCL2 deleted/truncated
    Interface access functions from dynamic library dbmssslib.dll loaded.(RFF) ERROR: invalid checksum in data file "D:/Inst/DBEXP2/EXP2/DATA/SAPAPPL1.007"
                 current table was "PCL2"
    (DB) INFO: PCL4 deleted/truncated
    (RFF) ERROR: invalid checksum in data file "D:/Inst/DBEXP3/EXP3/DATA/SAPAPPL1.009"
                 current table was "PCL4"
    (DB) INFO: disconnected from DB
    I've found a note 162266 - Questions and tips for R3SETUP on Windows NT / W2K
    It said that this problem occurs when the data file is damaged during copying from CD or DVD. That make sense because our installation disks are copies made by DVD writer.
    So maybe I should download those two files from service, right?
    But I met another problem, I need SAPAPPL1.007 and SAPAPPL1.009. But on the website, export data are devided into 21 small packages. I have no idea which to download.
    Are there anyone who downloaded these files before? Could you spend some time and tell me which are the disks I need.
    Thanks

    Hi,
    Login as <SID>adm -->goto <b>run</b> --><b>sqlplus "/as sysdba"</b> --> <b> grant dba to sap<SID>;</b> and check with the installation.
    If it's not work check with the following SAP SAP Note Number 400241 - Problems with ops$ or sapr3 connect to Oracle.
    Regards,
    Suraj
    Message was edited by:
            Suraj kumar

Maybe you are looking for