Multicam sequence in Premier Pro CC not syncing

I created a multicam sequence in PPCC based on audio waveform. I had success with 5 of the 6 clips from 3 cameras. I opened in the timeline and there was absolutly no sync. All the camera angles started at 00;00;00;00 in the timeline which is impossible because they started recording at different times. It's like the sync data just left the building. Any ideas?

Exactly. I don't know. PPCC said it wasn't able to sync one of the 6 clips, so, successfully with 5 of the 6. One would think that upon opening the newly created multicam sequence that you would find 5 clips ready to go. That was not the case. There were 5 clips, they all just started at 00;00;00;00.  PPCC said it was successful with 5 of the 6 when in reality the clips were not at all synced. That's the issue.
I was just starting to use Pluralize when PPCC with multicam audio syncing became available. I'll go back to that. I appreciate the press to sync manually, but I have projects in the pipeline that involve more cameras than I'm using now. Whether through PPCC or pluralize, I'd like to have the ability to multicam audio sync.
If anyone comes up with a fix for the issue or has insight to what I'm doing wrong, your comments are much appreciated. I have had success in the past with multicam audio syncing in PPCC. I don't know what changed.

Similar Messages

  • Importing After effects sequences to premier pro with camera and effects

    Hi there,
    I'm gonna try n put this across as best as I can. I have made a short film of 6 minutes (in 6 parts on after effects) I have added all the effects and the camera work on AE, but it needs a lot of editing here and there, which I find impossible to do on AE since you can't cut and join scenes like Premier pro. I need to import all these sequences onto premier pro for editing now. The problem is once I import the files, it imports in the right order in systematic folders etc, but it doesn't show any of the camera work or the special effects like gaussian blur etc. All my hard work has gone.
    There must be a way you can import the after effects file on premier the way it looks on AE. Can somebody please help me?
    Another problem is I read some boards and it has been suggested to edit the clips first on premier and then add effects on AE but I read this really late and I've already composited the whole film on AE. I just need premier for cutting now.
    Thanks for any help in advance.
    Cheers,
    Nikhita
    P.S: I also thought about exporting the AE sequences as TGA files but there's ZERO space left in my internal hard disk for that, and it would take forever to export them all anyway. Any other kind of export would reduce the original quality which I dont want, and which I dont have space for anyway, so that option is out as well.

    Every production house in the world that is working on more than one project uses external storage for their video files. As long as the drive name and path do not change you have no problems.
    Lossless or nearly lossless means that. No visible reduction in quality. That's why every production house that knows what they are doing uses production codecs in their workflow. Production codecs range from uncompressed (which very few use) to Avid, Black Magic Design, ProRez and a host of other specialized codecs. Jpeg2000 and png QuickTime can store alpha channels as well as a bunch of other 3rd party codecs.
    The way you start loosing quality is to use highly compressed formats like H.264 or MPEG or AVCHD in your production pipeline. It is usually OK to start with these codecs as original footage if the camera you used only offers these options, but any use of a delivery format in the production pipeline for anything but delivery is not a good idea.

  • "Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers." What does this mean? Need help urgently!

    Premier Pro CC will not open, even though all my computer software is updated. It comes up with the message every time I try and open it. "Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers and start again." What does this mean? I have been searching the internet for an answer for hours. Urgent help needed.

    Error "Premiere Pro could not find any capable video play modules" | Startup 

  • My MacBook Pro will not sync address book changes with my IPhone.  Why?  It used to.

    My MacBook Pro will not sync address book changes with my IPhone.  Why?  It used to.

    Then you may have to try manually resetting the syncservices folder by following Julian Write's post (from https://discussions.apple.com/message/9274781#9274781):
    Ok, as you can't reset SyncServices in the "normal" way, you'll have to resort to the "other" way:
    Although it's not advised to do so in normal circumstances, you'll need to manually delete the SyncServices folder.
    Before doing so, you MUST make a backup of both your Contacts and Calendars:
    In Address Book, choose *Export > Address Book Archive...* from the File menu.
    In iCal, choose *Back up iCal...* from the File menu.
    Then, make a backup of the SyncServices folder located at:
    ~/Library/Application Support/SyncServices
    By backing everything up first, you don't risk losing anything.
    Finally delete the aforementioned SyncServices folder and restart the Mac. This will force Mac OS X to recreate the SyncServices folder, and hopefully fix your problem.
    I believe in Snow Leopard you can back up your calendar in File>Export>iCal Archive rather than File>Back up iCal as posted above.

  • My mini mac recognizes my usb mic, but premier pro does not list it under preferences?

    my mini mac recognizes my usb mic, but premier pro does not list it under preferences?

    Hi Robert,
    This has to do with Audio MIDI setup. See this article: https://multimedia.nscad.ns.ca/pdfs/Setting%20up%20a%20USB%20Microphone%20for%20Premiere%2 0CS6.pdf
    I hope it helps!
    Thanks,
    Kevin

  • Premier pro does not show in creative cloud

    premier pro does not show in creative cloud

    Adobe's MINimums http://www.adobe.com/products/premiere/tech-specs.html
    -Programs won't display if they will not install on your computer
    -http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

  • Premier pro is not on the list in cloud to download? i have tried multible ways but still cant get the free trial download

    premier pro is not on the list in cloud to download? i have tried multible ways but still cant get the free trial download

    Hi axeevan,
    Please download the Premier Pro CC application through your account on adobe.com.
    If in case you still face issues, please contact support:
    https://helpx.adobe.com/contact
    Regards,
    Sheena. 

  • HT1386 selected itunes on macbook pro will not sync to iPad

    selected itunes on macbook pro will not sync to ipad

    Might there be an ownership issue --- such as:
    Might the tunes that do not sync to the iPad have been purchased using a different Apple ID and password than are either used on the iPad or authorized on the computer's iTunes?
    Remember, purchased music is protected.  It cannot be indiscriminately shared.

  • Blending mode in Adobe Premier Pro CS4 not working???

    in Adobe Premier Pro CS4, the "multiply" blending feature is not  working properly. When there's no video underneath the "blending" layer,  it SHOULD not show anything, but instead the clip instead just shows  up.

    Well, the problem is that you're assuming that the "nothing" in the gaps in your PPro sequence is "something," when really, it actually IS "nothing"...
    OK, existentialism aside, when you see black in the Program Monitor that results from a gap between two clips, from a digital standpoint, there really is nothing there. Empty spaces in a PPro sequence are actually a fully transparent layer, created by an alpha channel that encompasses the entire frame. Since the Multiply mode is expecting RGB values to operate on, when it doesn't encounter any (due to the alpha channel) the effect is just ignored--that's why you see the clip with the Multiply mode when it crosses those gaps.
    You can correct this by filling your gaps with "real" black, either from an imported graphic or from the black video generator in PPro. Simply edit a bit of it into the gap so that there are no holes, and your multiplied clips will disappear.
    And for that matter, it's never a good idea to leave empty holes in a Premiere sequence; it's often the cause of rendering and exporting headaches.

  • Encore having trouble loading my sequence from Premier Pro CC.

    I have made DVD's before with Premier Pro CC and Encore, but today it is stalling when I try to import my timeline from PPCC. It says," Import Premier Pro Sequence. Loading." It will stay on this for hours not moving. Is Something wrong with my Encore? Is something wrong with my sequence?

    You can't import a sequence from Premiere CC to Encore CS6, you have to export the video out of Premiere as a Mpeg2dvd and import the two files, one audio and one video, into Encore. Encore CS6 is the last of the Encore releases and will not directly link to any of the CC programs.

  • Address Book on MacBook Pro does not sync with IPad or Iphone

    I have a MacBook Pro with OS10.7.4.  When I add a new address it does not sync with my IPad or IPhone.  However, adding an address on the IPad or IPhone it will appear on the IMac Pro.  I have checked to make sure that the Address Book on my IMac is directed to ICloud.  I also tried to uncheck the Address Book on ICloud, recheck and restart the computer with no success.  What am I missing?

    It just started to sync.  Forget the question.

  • I bought creative suite production cs6from Adobe and I have downloaded all the programs. However CS6 premier Pro does not open. A message says to upgrade mt video driver. This I have done but it still will not open. Please help Brian Dowdall

    I have the CS6 production suite. All the programs work except Premier Pro. It starts but tells me I need to upgrade my video software, which I have done.
    Can I rpair or  reload the Premier pro again without effecting the other programs in the suite which all work well.
    Brian Dowdall

    Nothing to do with the program. Something is not right on your system, but since you haven't provided any proper technical information we can't even begin to guess.
    Mylenium

  • Premier Pro CS6 not listed in Apps in Creative Cloud

    I need Encore CS6, but that comes with Premier Pro CS6 and that is not listed my Apps panel of Creative Cloud.

    Is your computer 64 bit?
    Premiere Pro only installs and runs on 64 bit computers.
    If your computer is 32 bit then you will not see Premiere Pro listed.

  • Premier Pro CS6 not displaying Video

    Premier Pro CS6 is not displaying video.  Loads and plays clips with sound and all monitors work but no video displayed, installs them in timeline, exports - just does not display video in program or preview monitors nor will it scrub in the thumbnails (static images only). Just started all of a sudden for no apparent reason.  All valid file types, even previous projects that worked fine before display no video now.

    If you are on Windows it HAS been known to happen that a Windows Update will cause a video driver to have problems (more information when you ask a question is a good thing http://forums.adobe.com/message/4200840 so people will be able to help)
    It is "more usual" to need a video driver update, so good to know that a simple un/reinstall worked for you

  • Lost a sequence in Premier Pro.

    Hi! I lost several hours of work after saving regularly in Premier Pro. I can't find the sequence I was working on. There was a "serious error" message, but I can't even find it in the auto-save folder. Sorry if this is a newb query, but the software works beautifully for me otherwise. Does it save the project and only some of the sequences? I can scroll through all the sequences, but the one I was woking on doesn't appear. Thx all

    Ask in the Premiere forum and provide some useful and sensible information like system info, sequence settings, footage used, folder configuration and so on.
    Mylenium

Maybe you are looking for

  • Webcenter Discussion

    Hi All, We have a requirement where in we need to create a webcenter discussion, I'm referring to "Developer's Guide for Oracle WebCenter 11g Release", I want to create a new category through the "Oracle WebCenter Discussions administrator interface"

  • Airport Base Station witk PC

    I have an airport base station 2.0. I have several internet users in my home. Two mac laptops, two pc laptops and a desk top pc. They are all wireless. It is difficult for the pc users to maintain a connection with the internet through the hub but th

  • Indesign Move Pages

    When using the Move Pages to move from Document A to B and before closing  B are the images still linked to the Document A folder or do they assume the linkage to the same graphic name in the Document B folder.

  • ESB  --  BPEL, Web Services

    Hi @ all, I have a question. My application has a BPEL-Process and 3 orchestrated Web Services. Is it usefull to use ESB (Enterprise Service Bus) for this application? Advantages / Disadvantages ?? Thx!

  • Error loadjava xmlparserv2 pl/sql

    Ich versuchte den XMLParser (XML/PLSQL) xmlparserv2 sowie xmlplsql.jar in den JServer zu laden. Das Laden lief ohne Fehler ab, jedoch beim "resolven" der Klassen erhielt ich folgende Fehlermeldung: Referenziertes Object Scott.oracle/xml/parser/v2/XML