Multicam sync issues

I've found about six different camera flashes to use as inpoints to sync up the clips of a three camera shoot and each time one of the angles in the subsequent multiclip is way off. Is there any way, after creating a multiclip, to slide a single angle around and manually sync it up?

horsesbreed wrote:
Is there any way, after creating a multiclip, to slide a single angle around and manually sync it up?
Yeah, select the Angle in the Viewer, then hold down *Control & Shift* while dragging the mouse left/right to adjust sync.

Similar Messages

FCP Multicam Sync Issues

i am edited a project in final cut using the multicam feature. sometimes the canvas and viewer will not sync, or i cant get any angle but the active one on the viewer. this is very frustrating, its wasting a lot of my time. what can i do to avoid this? thanks
Final Cut 5.1.4 and i edit from a external hard drive.

"sequence error, unable to add clip to sequence. possible media limits problem in clip or sequence."
I've not seen that message before. Any chance of re-acquiring the media...could be corrupt somehow.
Could be your external drive is going bad.?.?
RE: OS/FCP/QT combo...
These links show best combos and has QT downloads.
http://www.digitalrebellion.com/blog/cats/28/index2.html
http://www.digitalrebellion.com/blog/posts/listof_quicktimedownloads.html
Did your Tiger disks go away with your tower? Not sure of best options to get another set, others might have some insight.
I'd try to exhaust all other possibilities before any downgrade.
-Delete prefs
-Run Disk Warrior on external...or at least Disk Utility/Repair disk
-Confirm media settings exactly match sequence settings.
-What type of external drive and how is it connected.
2 streams of DVCam shouldn't be an issue on a laptop.

Multicam sync issues on export

Hi all,
I wonder if anyone else is having this problem. I'm editing a 2-camera multicam shoot in Final Cut (5.0.4). We shot DVCPRO HD 720p24 on the HVX-200. Everything works fine in Final Cut, but when I export, either Automatic Duck to After Effects for some keying, or, it would seem, to a Quicktime movie, things go wrong.
With Automatic Duck, it clearly gave me the wrong timecode because the clips were slightly wrong (some of the time). I tried match-framing the clips and re-dropping them into my timeline (video only, because I wanted to keep the audio all from one source). This worked fine, but it told me that there was an audio-video offset by a few frames (even though, on playback, it was in sync). This offset seemed to correspond to the clips that were problematic in After Effects.
Then, when I exported a Quicktime movie of the original multicam, not the match-frame, the video drifted in and out of sync. I can't be sure, because I haven't run tests, but I would certainly guess that this is the result of a similar problem.
Has anyone else encountered this? Is this an inherent problem in multicam or does it just affect DVCPRO HD? Am I doing something wrong? Is there a better solution? Etc.
Thank you in advance for any help.
- David

Use shorter audio files. Break up the audio into shorter, more manageable chunks, and then place those shorter audio files in your movie.

Multicam sync issue

Here's the scenario:
Shot three fly fishing instructional videos in a row. Each one was identically set up with two cameras and an audio recorder. I normally have the audio active on the cameras so I can easily sync up the multicam via audio.
However, I failed to notice that one mic was not connected so I ended up with one video sans audio on all three sessions. So to clarify, I ended up with a video clip without audio, a video clip with audio, and an audio clip for each of the three sessions.
No problem methinks, I just set markers on the two videos, left "Audio sync" enabled and created my multicam clip.
Worked perfectly on two of my sessions, but the third failed, being out of sync by a couple of seconds. The angle editor revealed that the markers were not quite aligned. No problem, just manually synched them.
But, why would two work this way and the third fail? Or did I just get lucky with the first two?

Rusty Rat wrote:
H
Or did I just get lucky with the first two?
Yesl. I do think you got lucky when you set the markers the first time.
Russ

Multiclip sync issues - resolved???

Searching through the threads here I've seen a few different posts regarding the loss of sync in multiclips when moving media files around. Unfortunately all of the threads are locked and can't be posted to. None of them have been answered!
I've just run into a similar situation and am trying to find out if the recent update to FCP 6.0.3 has fixed this. My problem, which is 100% repeatable is as follows:
Create a new project/sequence.
Capture 2 camera tapes from the event (1 w/ timecode, 1 via a analog to digital converter, ie no timecode)
Review each captured clip and insert markers where I want to use scenes.
Create subclips from each marker I want to use
Mark In Points in each subclip to use as sync points (clapper board in my case)
Select the corresponding subclips from Camera A and Camera B and Make Multiclip using In Points for sync.
Place multiclip in timeline.
Play sequence and use keypad to insert camera changes.
Save file.
At this point everything is fine. My sequence plays back with all of my angle changes.
Now if I quit FCP and use the finder to move one of the captured files to another hard drive everything goes to sh*t. When I reopen the project, FCP will ask me to reconnect to the offline media file. No problem; use the dialog box to locate the moved file and reconnect. Now when I go back to the sequence and play it, the 2 camera angles are completely out of sync with each other. I'm not talking a few frames, its usually several seconds at least.
I've done this several times, and it always happens. FCP absolutely cannot maintain multiclip sync info when a media file is moved.
Just as a point of further frustration, I know someone is going to respond that I should use the Media Manager to move media files around. This is also broken. That's how I originally discovered the problem. I went to create an archive of the whole project. My destination was an external hard drive. When opening up the newly created project, I saw the same out of sync multiclips. My guess is because the media files were now on a different hard drive.
Also, try to roundtrip a multiclip sequence to SoundTrackPro - totally hosed when it comes back into FCP. Same out of sync issues.
So something is definately problematic here. I'm still on 6.0.1 and can't risk updating while this project is in process. But I would like to know if this problem still exists in 6.0.3.
Thanks,
Chris

Chris-- I am having the same problem-My media went offline-- tried reconnecting and get this message stating that the attributes of the original clip have changed; mark in and out-- then when i reopen my sequence certain clips that are multicam have suddenly got different ins and outs-- have no idea what is causing this but here is some advice someone posted on another forum:
I do almost nothing but multi-cam editing, and have for the last 8 to 10 years, but the overwhelming majority of my work is with matched time-code cameras. I have worked with in-points on FCP and have not had these problems, but I don't do it that often, so I don't feel comfortable telling someone that he's not having the problems he is having.
Jasper - when making multi-clips with in-points are you using master clips or sub-clips? Also are you sure you haven't seperately used the same source clip and thereby changed the in-point reference? These would be the first 2 things i would test when trying to figure out why the multi-clips were not functioning. Also I will say the a sure way to get corrupted multi-clips is to use a clip that has time-code breaks within it - something that shouldn't happen, but that actually happens all to easily in FCP.
Finally I can offer this work around, change the AUX time-code on the clips and sync with them. FCP makes it incredibly easy to change the time-code on a captured clip, and that includes 2 optional AUX time code tracks that are available for each clip. Find a sync point on each of the clips that you want to use in a multi-clip, go to Modify / Time Code - check the AUX TC 1 box and enter a common time code in the window - I would recommend that this time code be a copy of the actual time code of your most important clip, but anything will do - and then when making a multi-clip choose to Sync with Aux 1. (just don't uncheck the box containing your source time-code or you'll loose it - leave both boxes checked) - this extra step does not take long and should alleviate your problems.
hope this helps?!@

Performance problems with multicam sync sets

I'm working on editing a concert video where we have up to 8 cameras. The whole concert is in one big multicam sync set (imported from PluralEyes).
And my computer just isn't hacking it. Intel core 2 quad 2.67GHz, 16GB ram, Windows 7 64-bit, and I just added a pair of 7200RPM local data disks in a striped configuration for performance. Graphics card is an Nvidia GT 630. This is well past the recommended hardware, but of course the processor and motherboard are a bit old. (Oh, and OS disk is a 256GB SSD, and there's an 80GB SSD for scratch and stuff; the source files for the concert exceed 500GB hence can't be on those.)
When I open the multicam set in the source viewer, it takes more than 30 seconds to come up with the set of camera views. And when I click on another spot in the playback line, it takes forever or longer (i.e. it never does) to come up with the new set of views. moving a frame left or right sometimes works, and sometimes doesn't.
Watching the resource monitor while this is going on, I can't tell what's really going on. It hasn't consumed nearly all the memory, and disk traffic isn't extreme (and goes to zero in the case where it never does display the right view).
I first thought the problem was editing from an external USB3 disk, hence the upgrade with the local striped pair of real disks; but that made only a marginal improvement. I've checked graphics driver version, and that's current. Premiere says it's using CUDA.
And I don't have any real option of spending another $500 to upgrade things right now.
Wondering -- is the total length of the multicam set possibly an issue? It seems like Premiere would really only deal with parts close to where the playback head was, and the total length wouldn't be a big deal. I suspect the *width* is the problem, because narrower sets have been less trouble. That's harder to try to fix right now unfortunately :-( .
I did also try this on my laptop -- i7 processor, 8GB, but not separate graphics (Intel 3000 I think, no CUDA). Had to use the external USB 3 drive there (internal drive is small SSD). Ended up behaving essentially the same as the desktop, no better no worse. So *just* upgrading the disks isn't the answer based on the desktop trial, and *just* upgrading the processor isn't the answer based on the laptop trial. Is there a clear answer?

I just ran a test with a 8x multicam AVCHD project (1920x1080x29.97) in your behalf. Here's how I set in up, and here's what I measured during an un-rendered (real time) playback:
On my 8-core cpu, loading was about 46% (indicates with a FAST 4-core CPU, you might just be OK
I limited Adobe CC 2014 to only use 12GB of RAM (approximating the performance with your 16GB system)
GPU was pretty much idle
Disk reads ~ 23 MB/s; disk writes ~1.5 MB/s (not too much disk activity here really, your SSDs sound fine)
Playback was perfect with zero lost frames (playback resolution = full); scrubbing was usable, but somewhat sluggish (at full playback resolution and limited to 12GB of RAM); When I bumped RAM available to Premiere up to 32GB, scrubbing was perfect (snappy) even with playback resolution set to full
Bottom line, you may actually be able to do a sub-$500 upgrade that would really help your current system. What motherboard do you have now?
Regards,
Jim

More Aperture/iPad syncing issues

Each time I create a new project or album in Aperture, I have trouble getting the images to the iPad when I sync. I sometimes need to sync several times until the images are recognized and imported to iPad. I do have the albums designated manually, rather than all, which means I have to sync and then sync again after I check the checkbox for the new album. I understand that, but sometimes I have to go back into Aperture to make sure the previews are updated. If I choose to update the previews for a project, Aperture will usually tell me that they're already up to date, but often they will not show up on the iPad, even after I check the appropriate box for the album in iTunes. Sometimes I get good results if I delete the previews and regenerate them in Aperture.
The second problem is the sort order. Even if I have "sort by filename" selected in Aperture, they do not show up in this order on the iPad--despite what the support article says about this. They appear to only show up in Date order. I've tried repeatedly resetting the sort order, but it does not change on the iPad. Sometimes I have to delete the album from the iPad, (uncheck the album in iTunes and sync again), then recheck it and sync yet another time. This does not always work, however.
It is very frustrating. The interface between Aperture and the iPad is very wonky. I often have to sync repeatedly, just to get the photos on the iPad and even then they're usually in the wrong order.
Aperture appears to have two types of previews: "previews" and "sharing previews," but "sharing previews" don't seem to appear in the documentation. I've noticed that, even when Aperture says the previews are up to date, when I exit the program, it will sometimes (but, maddeningly, not always), give the message, "updating sharing previews" before quitting. I cannot figure out how to force this, however. Sometimes opening and closing Aperture several times will cause it to do this, but I can't be sure.
iTunes seems to have its own process in which it "optimizes" images for importing to the iPad. Like Aperture's mysterious "sharing previews," "optimizing" does not show up in the iTunes documentation or help files.
This process either needs to be improved, or at least documented so users can understand how to avoid these problems.

1. Some people have reported slow syncing with anything but the iPad's own USB cable (e.g. using a US cable from an iPhone/iPod). Try different cables
2. More work - disable iTunes syncing completely, then re-enable a bit at a time, e.g. one movie at a time, one playlist at a time, one photo album at a time. There are periodic reports of syncing issues caused by a bit of media that's been corrupted, and this (tedious) approach allows you to identify where the problem might be.
3. If that fails, do a clean restore back to factory settings, then progressively re-enable syncing as above.
Hope this helps

Sync issues after iOS 8 update

Hi,
I have an iPhone 5S, 64 GB. After updating to iOS8 I got sync issues. "Waiting for changes to be applied" never disappeared. Also the storage usage in iTunes 11.4 is wrong. iTunes said I had 6GB free, when I had in fact 20GB. I restored the phone back to firmware, restored the backup. All was fine until I made setting changes in iTunes what I want to sync. The same issue in iTunes is back again. I already deleted my voice memos as someone recommended in another threat but that didn't help.
Any ideas how I can solve the problem, would be appreciated. Thank you!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Disappearing Contacts, Mobile Me Sync Issues, Calendar crash-Answers??

I'll try to keep this post brief but hopefully it will help provide some possible answers for frustrated users experiencing the random complete wipe out of all contacts and calendar data when syncing with mobile me using either push or fetch. After several weeks of experiencing these random sync issues and spending several hours over several days between tech support calls with iPhone then Mobile Me support and then finally a genius bar appointment where the genius said he didn't have a clue and simply offered to replace my phone.
The next morning, SAME PROBLEMS... and through it all NO ONE could tell me why my sync was so randomly unreliable. Every other day for no apparent reason, my phone would suddenly lose all contacts and/or calendar data. (A few thousand contacts and two years of calendar data). It was both frustrating and strange—even stranger that Apple techs had no clue why and seemed to think no one else was having this issue.
I tried everything - complete restores, resets, deleting and re-adding the mobileme account, etc., etc., etc. One tech support person finally said, "good luck..." The others kept handing me off the higher levels of support... until finally they just said "we don't know why this is happening." I was waiting for someone to just say, "Look, we have issues with mobile me, so hang in there and eventually it will work." I can be patient and I still think the iphone is the greatest invention in recent years. But everybody I talked with at Apple seemed to think this should be working flawlessly.
I also started having a crash on the calendar anytime I tried to see the list view for "all calendars." This was frustrating because that's the best feature of the calendar app!
I was prepared to just return to syncing with my computer and wait for the software to improve between the phone and mobile me. Finally, last night I tried a few things that seem to be working... and for the first full day, mobile me is actually useful to me today. (my fingers are crossed!)
Here's what I did.
1. I minimized the number of calendars I was syncing - I have no idea if this affected the sync, but I was syncing eight calendars, now I'm down to four. (You can easily export a calendar and import those events back into a different calendar.)
2. I did a complete restore of the phone (not from a back up) and the VERY FIRST THING, I added mobile me and synced only the calendar (set to push.) This cleared up the random calendar crash in list view and also mobile me was pushing data rather reliably. After a few moments my entire calendar was on the phone and worked perfectly. New events were transferred quickly back and forth.
3. I then chose to sync my contacts through the computer rather than over the air. I fear that the contact sync was somehow messing up the whole communication process between the phone and the cloud. Someone suggested that the number of "groups" in contacts might have an impact on the sync issues as well. I didn't need my contacts to sync with the urgency of "push" so this works for me. Plus I have a lot of contacts and it's just faster over the cable.
4. I then GREATLY reduced the number of apps on my phone. I originally had about 27 and I only reinstalled 9 of them. I did this ONE AT A TIME - starting with the most necessary and useful... and after each install, I checked the functionality of the calendar and mobile me. No problems. Perhaps I was having an app conflict?
5. Then I reinstalled the rest of my content - music, podcasts, photos. Still no problems.
ONE of these steps actually worked, and I'm not sure which one. My guess is that one or more of my apps was conflicting in some way. OR possibly something with the contact sync... but for the last 24 hours the mobile me calendar sync using push has been consistently reliable and useful. (for the record, mobile me email has always worked perfectly for me.)
No one with tech support ever suggested to me that I could be having an application conflict or any other problems with calendars or contact groups, etc. I've spent many hours on this the past few weeks... and for the first time, my iphone seems to be working with mobile me correctly.
In reading many of these posts, it seems a lot of others are having similar problems... so hopefully these suggestions might be helpful. If you have any thoughts as to which of these solutions was the correct one, I would be interested in hearing your opinion.
Thanks!

Are your Address Book contacts and iCal calendars/calendar events on your Mac synced with your MobileMe online address book and calendar?
When you say this data is not synced with your iPhone, none of your MobileMe online data is transferred to your iPhone, or after the initial transfer of this data to your iPhone when you first turned contacts and calendars for over the air syncing with your MobileMe account on your iPhone, the data is not kept synchronized with the MobileMe "cloud"?

How do I get rid of lip-sync issues with iTunes 10.2.2.12?

Hi Everyone.
Firstly, a very Happy Easter!
I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
The system stats for my PC are at the bottom of the post.
The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
I suppose my main questions are:
Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
Is the spec (below) of my PC causing any issues.
Here's an Easter Egg for anyone able to help!!
All the best
BandAidUK.
System Information
Time of this report: 4/24/2011, 10:13:44
Machine name: DEREK
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 3326MB RAM
Page File: 1273MB used, 3941MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
        Card name: NVIDIA GeForce 6200
     Manufacturer: NVIDIA
        Chip type: GeForce 6200
         DAC type: Integrated RAMDAC
       Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
   Display Memory: 512.0 MB
     Current Mode: 1280 x 1024 (32 bit) (60Hz)
          Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
      Driver Name: nv4_disp.dll
   Driver Version: 6.14.0012.6099 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
      WHQL Logo'd: Yes
WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: nv4_mini.sys
    Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
        Vendor ID: 0x10DE
        Device ID: 0x0221
        SubSys ID: 0x02F3196E
      Revision ID: 0x00A1
      Revision ID: 0x00A1
      Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
            Description: Creative SB Live! Series
Default Sound Playback: Yes
Default Voice Playback: Yes
            Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: P16X.sys
         Driver Version: 5.12.0001.0129 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 8/14/2003 16:58:12, 1296384 bytes
            Other Files:
        Driver Provider: Creative Technology Ltd.
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 8000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
              HW Memory: 0
       Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
               Registry: OK
      Sound Test Result: Not run
            Description: SoundMAX Digital Audio
Default Sound Playback: No
Default Voice Playback: No
            Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
        Manufacturer ID: 65535
             Product ID: 65535
                   Type: WDM
            Driver Name: smwdm.sys
         Driver Version: 5.12.0001.7000 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 3/22/2005 11:08:40, 260224 bytes
            Other Files:
        Driver Provider: Analog Devices
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
              HW Memory: 0
       Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
               Registry: OK
      Sound Test Result: Not run
Sound Capture Devices
            Description: Creative SB Live! Series
Default Sound Capture: Yes
Default Voice Capture: Yes
            Driver Name: P16X.sys
         Driver Version: 5.12.0001.0129 (English)
      Driver Attributes: Final Retail
          Date and Size: 8/14/2003 16:58:12, 1296384 bytes
              Cap Flags: 0x41
           Format Flags: 0xFFF
            Description: Hauppauge WinTV 88x Audio Capture
Default Sound Capture: No
Default Voice Capture: No
            Driver Name: hcw88aud.sys
         Driver Version: 2.125.28070.0000 (English)
      Driver Attributes: Final Retail
          Date and Size: 3/12/2010 09:47:58, 13440 bytes
              Cap Flags: 0x41
           Format Flags: 0xCC0
            Description: SoundMAX Digital Audio
Default Sound Capture: No
Default Voice Capture: No
            Driver Name: smwdm.sys
         Driver Version: 5.12.0001.7000 (English)
      Driver Attributes: Final Retail
          Date and Size: 3/22/2005 11:08:40, 260224 bytes
              Cap Flags: 0x41
           Format Flags: 0xCCC
DirectMusic
        DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
     DLS Version: 1.00.0016.0002
    Acceleration: n/a
           Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                  Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                  SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                  Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                  Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
        Registry: OK
     Test Result: Not run

Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
In List view, you can turn off every column (in menu View > View options) except track name.

Having sync issues with Outlook 2011 since upgrading to Mavericks

Hi All,
My work Macbook Pro 13" is having issues syncing my inbox and sent mail automatically. It's a hit or miss if I recieve emails in my inbox in a timely mannor with out pressing the Send/Recive button (even when i press it takes minutes to update). My Sent Items can show up an hour later even if I hit the Send/Recieve button.
All my mail is there and shows up/syncs on my iPhone quickly. I upgraded to Mavericks right when it came out and have only been having these sync issues for the last week or so.
I've cleared my mail cache and that didn't work. My calandar reminders and contacts don't seem to have any issues and no other apps have been preforming slow or strangely.... just my VERY important work email. My tech guys are stumped and I wanted to try you guys before they do a major rehaul of my system
Thanks!

A new Outlook Identity will most likely solve your issues. If you have any data under "On My Computer" folders, see this link:
How to move your data to a new Identity
BTW, how much free space on your drive? Use Disk Utility in Applications/Utilities to find this info. You need a minimum of 10% free but 15-20% is recommended.
Outlook gets very sluggish when you are low on disk space. If you have a bunch of older Identities from previous rebuilds you can delete these to help free up space.

ICal refuses to finish 'restore' ; trying to resolve sync issues.

trying to fix sync issues.
using missing sync.
everything worked perfectly for a ling long time before i thought it'd be cute to go in and put birthdays into addressbook, and select the option in iCal preferences to add those events to my calendar.
EVERYTHING has gone to **** since then.
the missing sync guys recommend i backup and restore addressbook and iCal.
addressbook did fine.
when i select the saved ICal database file (icbu) from my desktop, it will not complete.
what gives?
i'm trying to do this to fix another problem.
its like every step is making a new issue.
i am getting close to the edge guys...
pleaes help.
thanks!
c
(overall problem is that i cannot even get missing sync to overwrite my blackberry 8830 now.
for months, iCal, Addressbook, and Tasks synced perfectly.
all was well until i screwed with this stupid Birthday feature.)
Message was edited by: clyde c

also, i've already gone into iSync and cleared sync history....that didnt seem to affect anything.
thanks in advance for any insights at all.
c

IPhone and Windows 7 64 Bit - syncing issues

Hi,
Just wondering if anyone is able to help. I have updated to Windows 7 and am having problems syning my iPhone. It comes up with a multitude of errors but the most common is:
'The iPhone "Michael's iPhone" can not be syned. The required file can not be found.
I have restored the iPhone and after it resets, it sits at the Setup Window in iTunes for ages, then clicks over, starts syncing (it is doind that now) but also displays the error. Will be interesting to see if it actually finishes the sync and to see if the apps work on the phone.
I have also removed iTunes, Quicktime, Mobile App Supprt, Apple Software Updater, Bonjour and reinstalled and still the sync issues coninue. I also ran the diagnostic tool in iTunes on syncing and detecting the iPhone and it reports everything is ok.
Microsoft Windows 7 x64 Business Edition (Build 7600)
Gigabyte Technology Co., Ltd. P55-UD6
iTunes 9.0.1.8
QuickTime 7.6.4
FairPlay 1.5.18
Apple Application Support 1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number E400D*7E1<Edited by Host>
Current user is an administrator.
The current local date and time is 2009-10-23 19:56:37.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 5800 Series
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: cecad029456cdd284aef514988f34808
** iPod/iPhone Connectivity Tests **
iPodService 9.0.1.8 is currently running.
iTunesHelper 9.0.1.8 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
iPhone, iPhone 3GS running firmware version 3.1.2
Serial Number: 88924**3NS <Edited by Host>
Most Recent Device Not Currently Connected:
iPod nano (5th Generation) running firmware version 1.0.1
Serial Number: YM937**72D <Edited by Host>
** iPhone/iPod Touch Sync Tests **
Sync tests completed successfully.
I have applied all software updates and the latest chipset drivers for the motherboard. My Nano syncs without a problem. It just seems to be my iPhone.
I have iTunes installed in the defualt directory on C:\ with the mobile apps etc. Music is located on my E:\
I am not sure what to do now....

Well, the new gigabyte bios fixed the issue.

Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

Hello surig84,
Thank you for providing the details of the issue you are experiencing when syncing your iPad. I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

Like many others, I got the new iPad 3 and couldn't sync all of my photos. The best i got was 1,000 out of 15,000 to work. Today Apple released iTunes 10.6.1.7 and said the syncing issue was resolved. I erased my ipod cache and hit sync. Still locked.

Like many others, I got my new IPad 3 and could not sync all of my photos. The highest I got was 1,000 out of 15,000. Today Apple released iTunes 10.6.1.7 that , among other things, said it fixed the sync issue with photos. I excitedly, erased my ipod cache and hit sync. It looked like it was working, but just like before iTunes locked. This time at 2,244 of 15,000. Anybody have an idea of how to fix this?

What's the capacity of your iPad?
iTunes needs up to 3x of the actual size of the files you want to sync during the sync process. And syncing 15.000 photos could cross the size of the available free space on your device.
Don't forget that the pictures are now optimized for the retina display, so the size increases for each of them.
Message was edited by: Ingo2711

Multicam sync issues

Similar Messages

Maybe you are looking for