Multicam Video Rate

Hello,
I'm putting together 2-camera multiclips from HDV footage, and for some reason the Camera A timecode begins to drag behind the Multiclip Timecode by .03 per second.
It would obviously seem that the Multiclip TC was somehow set at 30 fps, and at 29.97 the Camera A is losing frames, but if so why?. Both cameras stay in sync with Audio, but the TC is dragging for Camera A. When you move the active angle to Camera B, its timecode is the same as the Multicam TC.
Does anyone have any ideas?
Thanks.
Mac OS X (10.3.9)

It is pretty baffling really. Both camera's are Sony Z-1's, Both Angles in the multiclip stay in sync with the audio, and the Camera B TC is the same as the Multiclip TC when you make it the active angle.
For some reason the Camera A TC falls behind by .03 per second. In the Browser, the Clips, the Multiclip... all say 29.97 and 48K.
So after an hour of footage the Clip-within-the-Multiclip TC is almost 5 seconds behind the Multiclip TC, and when you export, the footage is also out of sync.
Thanks
Mac OS X (10.3.9)

Similar Messages

How can I display three images in video rate succession (60 Hz)?

For a structured illumination microscope application, I have developed a VI that creates three images and displays them in rapid succession (as fast as the loop will go) on a second monitor.
From the naked eye it's pretty apparent that the loop is not displaying the images at video rate. Is there a way (perhaps with some sort of buffer) to get them to display faster? Is WinShow simply not going to be fast enough, and if not, what's an alternative method of displaying the images? If it helps, the images need only be displayed once each (the loop was just for testing).
Also, what is a way to measure the frame rate output of the images?
(sorry for the sloppy code, new to LabView)
Thanks,
-T
Attachments:
illuminationpattern.vi ‏31 KB

Hello,
Why don't you try drawing one window, call IMAQ WindShow once outside of the loop, then redraw that window each iteration within the loop. Hopefully this stops the flutter of the window. You can build a 3 element array of the 3 IMAQ images then use an index array to alternate through which image you want to be redrawn into the single window. The constant calling of IMAQ WindShow seems messy.
Regards,
Isaac S.
Applications Engineer
National Instruments

Display images at video rate

Hello
I have NI PCI 1424 board and the NI PCI 1422 board. I a trying to acquire images from my custom imager and display them at a video rate. I am using IMAQ Acquire Grab as shown in one of the examples provided with LabVIEW. I am grabbing one frame at a time and looping infinitely so that I can get a continuous stream of frames. This is doing the job of displaying the images but I know I am not getting the full frame rate out of my sensor and it is tending to be rather slow (about 1-2 frames per second).
I am sure there would be other ways to do this. I just do not know how.
Any ideas?
Thanks

Hello Rami,
I have modified the LL Ring example to include frame rate estimation and attached that with this email. You will need LabVIEW 7.1 to open this example. I hope this helps you out. Have a nice day!
Regards,
Nipun M
Applications Engineer
National Instruments
Attachments:
LL Ring with FrameRate.vi ‏123 KB

Array to Image at Video Rate

Hello,
I'm using Labview 2010 with SP1 (32-bit) on Windows 7 (64-bit) with NI-RIO 4.0 and a PCIe-7852R FPGA card. I've written a program for the FPGA card that acquires one line of an image (1024 values) from some custom hardware and puts the line into a target to host DMA FIFO. On the host I have a simple VI that reads all 1024 values from the FIFO. This happens continuously until the user presses a stop button. I'm getting one line, 1024 values, from the FIFO, about every millisecond but will eventually go faster. I would like to collect 1024 lines of 1024 elements per line and display it as an image. Using the obvious straight forward method I would concatenate 1024 arrays from the DMA FIFO and then update an Intensity Graph. Or, I would delete one line in an initialized 1024 by 1024 array, replace it with the line I've just acquired, and update the Intensity Graph after every line. Unfortunately employing either of these methods slows every thing down significantly. I've looked around for information about displaying data at video rate and have only found a couple threads that detail using the IMAQ package, which I have, to display from a camera that is supported by the IMAQ package. Unfortunately I am not using an off the shelf camera. How can I display array data as an image really fast? Any advice would be great.
Thanks.

The attached VI (LV2011) does about what you describe (I am using a U16 image as you did not mention what data type you were using).
Writing 1024 lines to the image takes ~65 ms on my dual-core, Windows XP, LV 2011 machine (not top of the line anymore by any stretch of the imagination).
Attachments:
Test Large Image.vi ‏40 KB

Video rate advice

Would be a video rate of 1500kbps (with Handbrake) be good to see a movie on apple TV and a 42 inches plasma screen? Thanks for any help

I have a 32" screen...
The default bitrate when using the ATV preset on Handbrake is 2500kbps, which for a 2 hour movie is about 2+GB
I tweaked the bit rate ripping Raiders of the Lost Ark at 1000kbps then 1500kbps and finally at the default, 2500kbps. The 1500kbps was totally fine and saves you over a gig space. I think the final file size for Raiders at 1500kbps was 956 megs as opposed to 2.13BG for the default setting on Handbrake.
I watched the 2500kbps (Apple TV preset) vs the 1500kbps (custom) and unless you're a REAL CRAZY videophile you can't tell the difference. This may help you save some space. It's up to you in the end really.

Multicam Video Editing

During Multicam video editing the playback in the mixer window with all 4 videos and the preview stutter after a few minutes of editing. This makes it very difficult to edit live. Please help as soon as possible we have a project needing to get done.
Thank you Merissa- ProVideo Productions Editor

First, work through all of the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed, report back with the DETAILS asked for in the questions at the end of that link

Video Rate Changes from Cinema Tools to Final Cut

I have a problem that exists on serveral levels. Hopefully I can explain:
1. I directed a concert shoot with eight cameras. All cameras were Panasonic DVX100A configured for 24p Advanced except one, which was a Panasonic SDX900 configured for 24p (which I later discovered was laid down with a 3:2 pulldown instead of a 2:3:3:2 advanced pulldown like the DVX100A cameras).
2. It was planned from the beginning to use the multiclip feature in FCP to edit the footage.
3. The tapes from each camera were captured from beginning to end—about an hour each tape, four tapes per camera—at full resolution, the pulldown was removed, and the clips were then recompressed to Photo JPEG EXCEPT the tapes from the SDX900.
4. When I finally figured out that the footage from the SDX900 used a 3:2 pulldown, I opened the captured clips in Cinema Tools and attempted to remove the pulldown. The problem I ran into there was that CT can't handle files larger than 9 GB. Each captured clip (four of them—one for each tape) ranged between 10 and 13 GB.
5. My solution to this was to open each clip in QuickTime Pro and split the clip in half, open each half in CT and remove the pulldown on the smaller files, then open the smaller halves in QT again and join them back together into a single clip.
6. When I open the new master clips in Cinema Tools and analyze them, the video/frame rate is 23.98 as expected. BUT, when I import the clips into Final Cut Pro, the video/frame rate is 29.97 and I can't understand why. If I try to do a pulldown removal (again) from FCP, it doesn't work—I get an error that it can't find a clip with a pulldown to remove (duh!).
Is this a bug, and is there any way to fix this and make it work? I need to make all of the assets available for my class at school.

I have a problem that exists on serveral levels. Hopefully I can explain:
1. I directed a concert shoot with eight cameras. All cameras were Panasonic DVX100A configured for 24p Advanced except one, which was a Panasonic SDX900 configured for 24p (which I later discovered was laid down with a 3:2 pulldown instead of a 2:3:3:2 advanced pulldown like the DVX100A cameras).
2. It was planned from the beginning to use the multiclip feature in FCP to edit the footage.
3. The tapes from each camera were captured from beginning to end—about an hour each tape, four tapes per camera—at full resolution, the pulldown was removed, and the clips were then recompressed to Photo JPEG EXCEPT the tapes from the SDX900.
4. When I finally figured out that the footage from the SDX900 used a 3:2 pulldown, I opened the captured clips in Cinema Tools and attempted to remove the pulldown. The problem I ran into there was that CT can't handle files larger than 9 GB. Each captured clip (four of them—one for each tape) ranged between 10 and 13 GB.
5. My solution to this was to open each clip in QuickTime Pro and split the clip in half, open each half in CT and remove the pulldown on the smaller files, then open the smaller halves in QT again and join them back together into a single clip.
6. When I open the new master clips in Cinema Tools and analyze them, the video/frame rate is 23.98 as expected. BUT, when I import the clips into Final Cut Pro, the video/frame rate is 29.97 and I can't understand why. If I try to do a pulldown removal (again) from FCP, it doesn't work—I get an error that it can't find a clip with a pulldown to remove (duh!).
Is this a bug, and is there any way to fix this and make it work? I need to make all of the assets available for my class at school.

Sync audio with video rate

i have captured video/audio through the deck that I have and it's rate is 48KHZ 16BIT and I have a audio file that is from the actual microphone. I want to sync these 2, but I can't seem to find the right way.
i've tried exporting the audio file in 48KHZ 16BIT and 24BIT and nothing, its still not synced. I don't know how else to do this. can someone please help me?

ok heres what i do... we have a youth tv show where this guy talks. we record the video from a canon AXH1. The audio is recorded from the camera but we do not use that audio. The audio from the mic he speaks on is recorded on a laptop using some audio program our audio guy uses. So what i do is align up the audio from the mic/laptop file with the audio from the camera so its synced....does that make sense?

Is it possible to add a video clip to an allready created multicam video

First i'm totally new to Final Cur Pro x. Is it possible to add a videoclip to the multicam file i've created ? I've created a multicam file with 2 angles and got them aligned manually cause FCP couldn't do it right. Anyway now i want to add a third angle is that possible.

Well this trick did it :-)
Multicam: Add additional clip?
Thanks for your suggestions

How to modify the video rate of a clip? HELP

I imported different videos for my FCP project. Almost all of them are in 25 fps but there are some that are in 29.97 fps and i see them with lines. How can i change this to 25?
Thanks.

I'll let someone else who has more time and patience than I answer that. I can't teach you how to use an application on a forum.

Can you output a multicam video (more than one angle on screen)

I'm trying to output some video for an engineering project and I need to be able to show four angles of the same intersection on one video. It is possible to do this? If so, how?

I am not sure if I have your question correct but yes it is possible.
Place a video on a track with another on the track above, a third on the track above the second. You can stack as many as you want on top of each other.
Then with the clip on the highest numbered track highlight the clip and then in the effects panel resize and reposition the clip, repeat going down the tracks
Col

Multicam Sync and Editing | Short and Suite | Adobe TV

In this episode of Short and Suite, Jason Levine shows you how to create a multicam video using a variety of different cameras so that the frame rates, frame sizes and aspect ratios all match up perfectly.
http://adobe.ly/wDw09n

Hi Jason,
These tutorials are outstanding! Have you written any books?
Thanks,
Greg

How do I relink my video files when the source files are located in an AVCHD folder structure?

I am using FCP X 10.1.1 and I was completely done with editing a simple multicam video for a choir track and when I was exporting it it failed. I re-opened FCPX and found that there are several missing files, when I had just been working with them just a second ago! I know about relinking video files, but when I try to locate the source files (knowing where they are), the browser will not let me select ACHD file contents to get at the video files. Also, I cannot open the Library file for my project either.
Here is a snap shot:

If it comes down to it, use clip wrap to carve your .mov files out of the SD. I am confused tho - if you were originally able to import all you needed and still have the original media ? Why can't you do it again to add other clips? To "get in" to your Library, control click on it>show paskage... but do NOT MOVE anything only copy.
Perhaps soeone else can shed light on this?

What are the movie to iPod video settings?

I wonder, what are the exact video settings corresponding to selecting "Movie to iPod" when exporting?
The settings left to consider for Movie to MPEG-4 when using H.264 320 x 240 are:
Bitrate: ? kbps
Optimized for: CD / Fetch / Stream
Frame rate
Sync every ? frames
And the advanced video settings:
Limit description to: Main, Extended, Baseline
Encoding: Best / Fast

After a bit of testing I think that a video rate of 622 kbps is used when selecting the internal Movie to iPod export option.
This results in 750 kbps when audio is 128 kbps.
Short videos in iTunes Music Store use 622 kbps video rate (Michael Jackson Billie Jean and Bad, Pixar For the Birds).
Longer videos used 570 kbps video rate (Michael Jackson Thriller, ABC - Lost).
However my original question was what settings to use to match the Movie to iPod export option.

SX20 has no video but c40 does

We have a remote office. Recently, when calling this office with the SX20, its connecting with audio only. This had previously worked before but we dont know whats changed. Calling the same remote office from a C40 in the same office as the SX20 works fine.
We have called some test numbers with the SX20 and that works fine too.
below are log extracts showing the call set up for a bad call and a good call. , iv'e replaced sensitive data with xxxx's
Does anyone have an idea of whats causing this from tyeh logs or what can generally be the issue?
thx,
happyhammer
==================================================================
Audio only SX20 to remote office
====================================================================
1040452.70 MC I: CallParticipantImpl: calledUri: h323:xxx.xxx.xxx.xxx
1040452.70 H323Call I: h323_call::makeOutgoingCall(p=21): Sending call request to stack (rate=1920000 srcName='', src uri='h323:xxx.xxx.xxx.xxx.' src e164='xxxxxxxxxxx' dest='xxx.xxx.xxx.xxx')
1040452.70 MC I: Experimental 1080p60 is configured on this box
1040452.71 MC I: RemoteParticipant::proposeMode(p=21, ch=1): Did not find mixer ((nil)) or channel (0x42bab024)
1040452.71 MC I: RemoteParticipant::propose60fpsThreshold(p=21, ch=1): Did not find mixer ((nil)) or channel (0x42bab024)
1040452.71 MC I: RemoteParticipant::reevalRefMode(p=21,ch=1) set ref [Audio (1): G.711a 64k ] q= auto, t60=6000
1040452.71 MC I: RemoteParticipant::reevalRefMode(p=21,ch=2) set ref [Video (2): vid-off [email protected] 0k ] q= auto, t60=6000
1040452.71 MC I: RemoteParticipant::reevalRefMode(p=21,ch=3) set ref [Video (3): vid-off [email protected] 0k ] q= auto, t60=6000
1040452.71 MC I: RemoteParticipant::proposeMode(p=21, ch=4): Did not find mixer ((nil)) or channel (0x42bd22ec)
1040452.71 MC I: RemoteParticipant::propose60fpsThreshold(p=21, ch=4): Did not find mixer ((nil)) or channel (0x42bd22ec)
1040452.71 MC I: RemoteParticipant::reevalRefMode(p=21,ch=4) set ref [Data (4): H.224-HDLC 64k ] q= auto, t60=6000
1040452.71 MC I: MediaServerAction(): InputGate(ig=224) creation took 192 miliseconds
1040452.82 MC !ER TransactionActionStorage::removeAction no match for Modify Mixer   id(5)
1040452.91 H323Call I: h323_call_handler::handleH323AlertInd(p=21, s=1): Incoming call alert indication
1040453.06 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialized 1
1040453.06 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 1 w 1920 h 1080
1040453.07 DATACTRL I: FECCCAPSREQ(): received global controller fecc capabilities
1040453.07 DATACTRL I: fecc_caps(ig=18,og=-1,s=0): updating caps
1040453.07 H224 !ER tx(p=21): pkt while not ready (so far 1 pkts dropped)
1040453.11 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=663/246/4852/158
1040453.57 MC I: RemoteInputGateImpl::setIncomingModeReport(ig=218,p=21) [Audio (1): aud-off stereo 0k ]
1040453.62 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=663/246/4852/158
1040454.13 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=663/246/4852/158
1040457.56 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=663/246/4852/158
1040458.41 H323Call I: h323_call_handler::handleH323CapsetInd(p=21, s=1) Received new capset
1040458.41 MC I: RemoteParticipant::setRRRate(p=21): Received new remote rate from protocol: 0 (old: -1)
1040458.41 MC I: RemoteParticipant::modeChanged(p=21, ch=1): ModesController wants to run mode: Audio (1): aud-off 0k
1040458.41 MC I: RemoteParticipant::modeChanged(p=21, ch=2): ModesController wants to run mode: Video (2): vid-off [email protected] 0k
1040458.41 MC I: RemoteParticipant::modeChanged(p=21, ch=3): ModesController wants to run mode: Video (3): vid-off [email protected] 0k
1040458.41 MC I: Conference::calcCommonRate(c=17,ch=3) rate=0
1040458.41 MC I: RemoteParticipant::modeChanged(p=21, ch=4): ModesController wants to run mode: Data (4): data-off 0k
1040458.41 MC I: RemoteParticipant::setRRCap(p=21): Received new remote capset from protocol: Capability table:
1: (1) G.711mu rate=64k ptime(ms)=20 2: (1) G.711a rate=64k ptime(ms)=20 3: (2) H.261 maxbr=1920000 fps-qcif=3000 fps-cif=3000 Simcapset:(0) {1,2}{3}
1040458.41 MC I: RemoteParticipant::modeChanged(p=21, ch=1): ModesController wants to run mode: Audio (1): G.711mu 64k
1040458.41 H323Call I: h323_call::sendOutgoingModesToStack(p=21): Modes sent to stack: audio: G.711mu, video: vid-off, duo: vid-off, data: aud-off
1040458.51 H323Call I: h323_call_handler::handleH323CallCnf(p=21, s=1) Incoming call confirm rate=19200 lang='' dest=[h323Id='xxxxxxx' ]
1040458.51 MC I: RemoteParticipant::setRRRate(p=21): Received new remote rate from protocol: 1920000 (old: 0)
1040458.51 H323Call I: h323_call::sendOutgoingModesToStack(p=21): Modes sent to stack: audio: G.711mu, video: vid-off, duo: vid-off, data: aud-off
1040458.51 MC I: setCallState(p=21) InCall
1040458.52 H323Call I: h323_call_handler::handleH323TpeStringAvailableInd(p=21, s=1) Tpe string available indication
1040458.54 MC I: RemoteParticipant::reevalRefMode(p=21,ch=2) set ref [Video (2): vid-raw [email protected] 0k ] q= motion, t60=921600
1040458.62 H323Call I: h323_call_handler::handleH323RtpOpenSessionReq(p=21, s=1) Open incoming media session (OLC/OLC-ACK, h233.chanid: 8: MC channel: 1)
1040458.62 H323Call I: h323_call_handler::handleH323RtpDecryptionKeyInd(p=21, s=1) Received decryption key (channel: 8)
1040458.62 H323Call I: h323_call_handler::handleH323IncMode: incoming mode
1040458.62 MC I: RemoteParticipant::configureIncomingChannel: Capability table:
7: (1) G.711mu rate=64k ptime(ms)=40 [0]
1040458.65 DATACTRL I: DataGateCfgReq(ig=18) hdlc=yes
1040458.67 MediaStreamController I: SC::PlayReq(og=10) path='/sounds/', tone=2
1040458.68 H323Call I: h323_call::configureIncomingChannelCnf(p=21) Receive media is set up for channel 8, sending confirm on open back to stack
1040458.68 H323Call I: h323_call_handler::handleH323RtpOpenSessionReq(p=21, s=1) Open outgoing media session (OLC/OLC-ACK, h233.chanid: 1: MC channel: 1)
1040458.68 H323Call I: h323_call_handler::handleH323RtpEncryptionKeyInd(p=21, s=1) Received encryption key (channel: 1, h323.type: 1)
1040458.69 MC I: configureOutgoingChannel(p=21, ch=1): Configuring mode : Audio (1): G.711mu 0k PT(0) (modescontroller says real is: Audio (1): G.711mu 64k )
1040458.71 RTP I: Flux Start FEC Decoder sess: 0
1040458.71 RTP I: Rtp_Ready_doRTPSourceMuteReq(app=0,strm=102) source unmuted
1040458.72 H323Call I: h323_call::configureOutgoingChannelCnf(p=21) Outgoing media is set up for channel 1, sending confirm on open back to stack
1040458.72 H323Call I: h323_call::configureOutgoingChannelCnf(p=21) Sending mic mute indication on startup (channel: 1, type: 1)
1040458.72 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=21, s=1) Mode changed (mediatype: audio, rtpaddress: rtp/rtcp 92.39.20.156:3230/92.39.20.156:3231 (fwtrav: mode: 0, keepaliveplno: 0, activertp: 0, activertcp: 0, RtpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, RtcpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, mode: Audio (1): G.711mu   0k PT(0) )
1040458.72 MC I: configureOutgoingChannel(p=21, ch=1): Configuring mode : Audio (1): G.711mu 0k PT(0) (modescontroller says real is: Audio (1): G.711mu   64k )
1040458.72 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=21, s=1) Mode changed (mediatype: video, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
1040458.72 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=21, s=1)Got mode change on a channel that is not open (mediatype: 2)
1040458.72 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=21, s=1) Mode changed (mediatype: duo, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
1040458.72 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=21, s=1)Got mode change on a channel that is not open (mediatype: 4)
1040458.72 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=21, s=1) Mode changed (mediatype: data, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
1040458.72 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=21, s=1)Got mode change on a channel that is not open (mediatype: 3)
1040458.72 RTP I: Rtp_Ready_doRTPSourceMuteReq(app=0,strm=102) source unmuted
1040458.73 H323Call I: h323_call_handler::handleH323MicOn(p=21, s=1) Mic on indication
1040458.73 MC I: ComasListener::recMicStatus(p=21) ON
1040458.73 MC I: RemoteParticipant::remoteMicStatus(p=21) unmuted
1040458.73 H323Call I: h323_call::configureOutgoingChannelCnf(p=21) Not sending openSessionCnf upon send mode change
1040458.74 RTP I: validateSSRC(sid=0) registering new ssrc (ea0f8401)
1040458.75 MC I: RemoteInputGateImpl::setIncomingModeReport(ig=218,p=21) [Audio (1): G.711mu 64k ]
1040463.62 DATACTRL I: FECCCAPSREQ(): received global controller fecc capabilities
1040463.62 DATACTRL I: fecc_caps(ig=18,og=-1,s=0): updating caps
1040463.62 H224 !ER tx(p=21): pkt while not ready (so far 2 pkts dropped)
1040463.63 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialized 1
1040463.63 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 1 w 1920 h 1080
1040491.57 MC I: AudioInputGateImpl::activeSpeaker(ig=218) RemoteParticipant 21 is the ACTIVE SPEAKER Active Speaker List: 21 1
1040514.20 CAMERA I: CamVisca::CamVisca_Ready_doCameraCommandReq
1040514.39 CAMERA I: CamVisca::CamVisca_Ready_doCameraCommandReq
1040514.55 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=641/246/4852/158
1040514.83 CAMERA I: CamVisca::CamVisca_Ready_doCameraCommandReq
1040514.92 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=641/246/4852/165
1040514.97 CAMERA I: CamVisca::CamVisca_Ready_doCameraCommandReq
1040515.12 CAMERA I: CamVisca::CamVisca_Ready_doCameraCommandReq
1040515.13 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=634/246/4852/165
1040515.26 CAMERA I: CamVisca::CamVisca_Ready_doCameraCommandReq
1040515.41 CAMERA I: CamVisca::CamVisca_Ready_doCameraCommandReq
1040515.42 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=628/246/4852/165
1040515.77 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=628/246/4852/172
1040516.06 CAMERA I: CamVisca::CamVisca_Ready_doCameraCommandReq
1040516.22 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=386/246/4852/172
1040516.57 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=386/246/4852/160
1040516.91 CAMERA I: CamVisca::CamVisca_Ready_doCameraCommandReq
1040517.08 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=386/246/4852/153
1040517.59 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=386/246/4852/153
1040518.01 CAMERA I: CamVisca::CamVisca_Ready_doCameraCommandReq
1040518.17 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=858/246/4852/153
1040518.53 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=858/246/4852/161
1040519.04 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=858/246/4852/168
1040519.55 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=858/246/4852/153
1040520.06 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=858/246/4852/157
1040520.57 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=858/246/4852/157
1040521.94 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=858/246/4852/157
1040586.53 MC I: AudioInputGateImpl::activeSpeaker(ig=218) RemoteParticipant 21 is the ACTIVE SPEAKER Active Speaker List: 21 1
1040693.73 MC I: AudioInputGateImpl::activeSpeaker(ig=218) RemoteParticipant 21 is the ACTIVE SPEAKER Active Speaker List: 21 1
1040784.73 MC I: AudioInputGateImpl::activeSpeaker(ig=218) RemoteParticipant 21 is the ACTIVE SPEAKER Active Speaker List: 21 1
1040790.01 H323Call I: h323_call_handler::handleH323RtpCloseSessionReq(p=21, s=1) Close incoming media session (CLC/CLC-ACK, channel: 8)
1040790.01 MC I: RemoteParticipant::configureIncomingChannel: Capset empty
1040790.02 H323Call I: h323_call_handler::handleH323RtpCloseSessionReq(p=21, s=1) Close outgoing media session (CLC/CLC-ACK, channel: 1)
1040790.02 MC I: configureOutgoingChannel(p=21, ch=1): Configuring mode : iX (1): undefined 0k (modescontroller says real is: Audio (1): aud-off 0k )
1040790.02 RTP !ER Rtp_Ready_doRTPSourceMuteReq(app=0,strm=102) invalid remote RTCP address, suppressing report
1040790.02 RTP !ER Rtp_Ready_doRTPSourceMuteReq(app=0,strm=102) invalid remote RTCP address, suppressing report
1040790.05 H323Call I: h323_call_handler::handleH323IncMode: incoming mode
1040790.05 MC I: RemoteParticipant::configureIncomingChannel: Capset empty
1040790.05 H323Call I: h323_call::configureIncomingChannelCnf(p=21): Not sending openSessionCnf upon receive mode change
1040790.05 H323Call I: h323_call_handler::handleH323IncMode: incoming mode
1040790.05 MC I: RemoteParticipant::configureIncomingChannel: Capset empty
1040790.05 H323Call I: h323_call::configureIncomingChannelCnf(p=21): Not sending openSessionCnf upon receive mode change
1040790.05 H323Call I: h323_call_handler::handleDiscInd(p=21, s=1) Received disconnect indication (Cause: 3:21, h323 cause: 31:21)- OtherRemote Q850
1040790.05 MC I: RemoteParticipant::reevalRefMode(p=21,ch=2) set ref [Video (2): vid-off [email protected] 0k ] q= auto, t60=6000
1040790.05 ModesController I: ModesController::resetRateLimit(ch=2)
1040790.08 H323Call I: h323_call::affirmIncomingDisconnect(p=21): Incoming disconnect affirmed
1040790.10 IXUser I: iXController teardownIxChannel: Not connected
=================================================================
audio and video to same remote office using a C40
=================================================================
Nov 14 14:27:30 (none) main: 3392266.06 MC I: CallParticipantImpl: calledUri: h323:xxx.xxx.xxx.xxx
Nov 14 14:27:30 (none) main: 3392266.06 H323Call I: h323_call::makeOutgoingCall(p=129): Sending call request to stack (rate=1920000 srcName='', src uri='h323:xxx.xxx.xxx.xxx' src e164='xxxxxxxxxxxxxx' dest='xxx.xxx.xxx.xxx')
Nov 14 14:27:30 (none) main: 3392266.06 MC I: RemoteParticipant::proposeMode(p=129, ch=1): Did not find mixer ((nil)) or channel (0x499cad9c)
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::propose60fpsThreshold(p=129, ch=1): Did not find mixer ((nil)) or channel (0x499cad9c)
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::reevalRefMode(p=129,ch=1) set ref [Audio (1): G.711a 64k ] q= auto, t60=6000
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::reevalRefMode(p=129,ch=2) set ref [Video (2): vid-off [email protected] 0k ] q= auto, t60=6000
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::reevalRefMode(p=129,ch=3) set ref [Video (3): vid-off [email protected] 0k ] q= auto, t60=6000
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::proposeMode(p=129, ch=4): Did not find mixer ((nil)) or channel (0x4994357c)
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::propose60fpsThreshold(p=129, ch=4): Did not find mixer ((nil)) or channel (0x4994357c)
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::reevalRefMode(p=129,ch=4) set ref [Data (4): H.224-HDLC 64k ] q= auto, t60=6000
Nov 14 14:27:30 (none) main: 3392266.07 MC I: MediaServerAction(): InputGate(ig=49) creation took 228 miliseconds
Nov 14 14:27:30 (none) main: 3392266.28 H323Call I: h323_call_handler::handleH323AlertInd(p=129, s=1): Incoming call alert indication
Nov 14 14:27:30 (none) main: 3392266.45 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=400/60/0/4575
Nov 14 14:27:31 (none) main: 3392266.80 MediaStreamController I: SC::PlayReq(og=12) path='/sounds/', tone=2
Nov 14 14:27:31 (none) main: 3392266.89 MC I: RemoteInputGateImpl::setIncomingModeReport(ig=43,p=129) [Audio (1): aud-off stereo 0k ]
Nov 14 14:27:31 (none) main: 3392266.98 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=400/60/0/4578
Nov 14 14:27:31 (none) main: 3392267.50 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=400/60/0/4575
Nov 14 14:27:34 (none) main: 3392270.47 H323Call I: h323_call_handler::handleH323CapsetInd(p=129, s=1) Received new capset
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::setRRRate(p=129): Received new remote rate from protocol: 0 (old: -1)
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::modeChanged(p=129, ch=1): ModesController wants to run mode: Audio (1): aud-off 0k
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::modeChanged(p=129, ch=2): ModesController wants to run mode: Video (2): vid-off [email protected] 0k
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::modeChanged(p=129, ch=3): ModesController wants to run mode: Video (3): vid-off [email protected] 0k
Nov 14 14:27:34 (none) main: 3392270.47 MC I: Conference::calcCommonRate(c=1,ch=3) rate=0
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::modeChanged(p=129, ch=4): ModesController wants to run mode: Data (4): data-off 0k
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::setRRCap(p=129): Received new remote capset from protocol: Capability table:
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::modeChanged(p=129, ch=1): ModesController wants to run mode: Audio (1): G.711mu 64k
Nov 14 14:27:34 (none) main: 3392270.48 H323Call I: h323_call::sendOutgoingModesToStack(p=129): Modes sent to stack: audio: G.711mu, video: vid-off, duo: vid-off, data: aud-off
Nov 14 14:27:34 (none) main: 3392270.57 H323Call I: h323_call_handler::handleH323CallCnf(p=129, s=1) Incoming call confirm rate=19200 lang='' dest=[h323Id='ARVATO' ]
Nov 14 14:27:34 (none) main: 3392270.57 MC I: RemoteParticipant::setRRRate(p=129): Received new remote rate from protocol: 1920000 (old: 0)
Nov 14 14:27:34 (none) main: 3392270.57 H323Call I: h323_call::sendOutgoingModesToStack(p=129): Modes sent to stack: audio: G.711mu, video: vid-off, duo: vid-off, data: aud-off
Nov 14 14:27:34 (none) main: 3392270.57 MC I: setCallState(p=129) InCall
Nov 14 14:27:34 (none) main: 3392270.58 H323Call I: h323_call_handler::handleH323TpeStringAvailableInd(p=129, s=1) Tpe string available indication
Nov 14 14:27:34 (none) main: 3392270.65 H323Call I: h323_call_handler::handleH323RtpOpenSessionReq(p=129, s=1) Open incoming media session (OLC/OLC-ACK, h233.chanid: 8: MC channel: 1)
Nov 14 14:27:34 (none) main: 3392270.66 H323Call I: h323_call_handler::handleH323RtpDecryptionKeyInd(p=129, s=1) Received decryption key (channel: 8)
Nov 14 14:27:34 (none) main: 3392270.66 H323Call I: h323_call_handler::handleH323IncMode: incoming mode
Nov 14 14:27:34 (none) main: 3392270.66 MC I: RemoteParticipant::configureIncomingChannel: Capability table:
Nov 14 14:27:34 (none) main: 3392270.67 DATACTRL I: DataGateCfgReq(ig=1) hdlc=yes
Nov 14 14:27:34 (none) main: 3392270.67 H323Call I: h323_call::configureIncomingChannelCnf(p=129) Receive media is set up for channel 8, sending confirm on open back to stack
Nov 14 14:27:34 (none) main: 3392270.67 H323Call I: h323_call_handler::handleH323RtpOpenSessionReq(p=129, s=1) Open incoming media session (OLC/OLC-ACK, h233.chanid: 7: MC channel: 2)
Nov 14 14:27:34 (none) main: 3392270.67 H323Call I: h323_call_handler::handleH323RtpDecryptionKeyInd(p=129, s=1) Received decryption key (channel: 7)
Nov 14 14:27:34 (none) main: 3392270.67 H323Call I: h323_call_handler::handleH323IncMode: incoming mode
Nov 14 14:27:34 (none) main: 3392270.68 MC I: RemoteParticipant::configureIncomingChannel: Capability table:
Nov 14 14:27:34 (none) main: 3392270.68 VIDEOCTRL-0 I: (proxy,161) maximum number of framestorage slices 2
Nov 14 14:27:34 (none) main: 3392270.70 MC I: VideoInputGateImpl::inputGateConfigState(ig=46): DecoderConfig[46]: maxMbps: 9000 maxWidth: 352 maxHeight: 288 memsize: 35348904
Nov 14 14:27:35 (none) main: 3392270.71 H323Call I: h323_call_handler::handleH323RtpOpenSessionReq(p=129, s=1) Open outgoing media session (OLC/OLC-ACK, h233.chanid: 1: MC channel: 1)
Nov 14 14:27:35 (none) main: 3392270.71 H323Call I: h323_call_handler::handleH323RtpEncryptionKeyInd(p=129, s=1) Received encryption key (channel: 1, h323.type: 1)
Nov 14 14:27:35 (none) main: 3392270.71 MC I: configureOutgoingChannel(p=129, ch=1): Configuring mode : Audio (1): G.711mu 0k PT(0) (modescontroller says real is: Audio (1): G.711mu 64k )
Nov 14 14:27:35 (none) main: 3392270.72 RTP I: Flux Start FEC Decoder sess: 0
Nov 14 14:27:35 (none) main: 3392270.74 RTP I: Rtp_Ready_doRTPSourceMuteReq(app=0,strm=5) source unmuted
Nov 14 14:27:35 (none) main: 3392270.74 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Outgoing media is set up for channel 1, sending confirm on open back to stack
Nov 14 14:27:35 (none) main: 3392270.74 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Sending mic mute indication on startup (channel: 1, type: 1)
Nov 14 14:27:35 (none) main: 3392270.74 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: audio, rtpaddress: rtp/rtcp 92.39.20.156:3230/92.39.20.156:3231 (fwtrav: mode: 0, keepaliveplno: 0, activertp: 0, activertcp: 0, RtpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, RtcpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, mode: Audio (1): G.711mu   0k PT(0) )
Nov 14 14:27:35 (none) main: 3392270.74 MC I: configureOutgoingChannel(p=129, ch=1): Configuring mode : Audio (1): G.711mu 0k PT(0) (modescontroller says real is: Audio (1): G.711mu 64k )
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: video, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1)Got mode change on a channel that is not open (mediatype: 2)
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: duo, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1)Got mode change on a channel that is not open (mediatype: 4)
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: data, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1)Got mode change on a channel that is not open (mediatype: 3)
Nov 14 14:27:35 (none) main: 3392270.75 RTP I: Rtp_Ready_doRTPSourceMuteReq(app=0,strm=5) source unmuted
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Not sending openSessionCnf upon send mode change
Nov 14 14:27:35 (none) main: 3392270.76 H323Call I: h323_call_handler::handleH323MicOn(p=129, s=1) Mic on indication
Nov 14 14:27:35 (none) main: 3392270.76 MC I: ComasListener::recMicStatus(p=129) ON
Nov 14 14:27:35 (none) main: 3392270.76 MC I: RemoteParticipant::remoteMicStatus(p=129) unmuted
Nov 14 14:27:35 (none) main: 3392270.77 H323Call I: h323_call::configureIncomingChannelCnf(p=129) Receive media is set up for channel 7, sending confirm on open back to stack
Nov 14 14:27:35 (none) main: 3392270.78 RTP I: validateSSRC(sid=0) registering new ssrc (bbf62201)
Nov 14 14:27:35 (none) main: 3392270.79 MC I: RemoteInputGateImpl::setIncomingModeReport(ig=43,p=129) [Audio (1): G.711mu 64k ]
Nov 14 14:27:35 (none) main: 3392270.90 MC I: RemoteParticipant::reevalRefMode(p=129,ch=2) set ref [Video (2): vid-raw [email protected] 0k ] q= motion, t60=921600
Nov 14 14:27:35 (none) main: 3392270.90 MC I: RemoteParticipant::modeChanged(p=129, ch=2): ModesController wants to run mode: Video (2): H.261 [email protected] 1856k
Nov 14 14:27:35 (none) main: 3392270.90 H323Call I: h323_call::sendOutgoingModesToStack(p=129): Modes sent to stack: audio: G.711mu, video: H.261, duo: vid-off, data: aud-off
Nov 14 14:27:35 (none) main: 3392270.90 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: audio, rtpaddress: rtp/rtcp 92.39.20.156:3230/92.39.20.156:3231 (fwtrav: mode: 0, keepaliveplno: 0, activertp: 0, activertcp: 0, RtpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, RtcpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, mode: Audio (1): G.711mu   0k PT(0) )
Nov 14 14:27:35 (none) main: 3392270.90 MC I: configureOutgoingChannel(p=129, ch=1): Configuring mode : Audio (1): G.711mu 0k PT(0) (modescontroller says real is: Audio (1): G.711mu   64k )
Nov 14 14:27:35 (none) main: 3392270.91 RTP I: Rtp_Ready_doRTPSourceMuteReq(app=0,strm=5) source unmuted
Nov 14 14:27:35 (none) main: 3392270.91 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Not sending openSessionCnf upon send mode change
Nov 14 14:27:35 (none) main: 3392270.97 H323Call I: h323_call_handler::handleH323RtpOpenSessionReq(p=129, s=1) Open outgoing media session (OLC/OLC-ACK, h233.chanid: 2: MC channel: 2)
Nov 14 14:27:35 (none) main: 3392270.98 H323Call I: h323_call_handler::handleH323RtpEncryptionKeyInd(p=129, s=1) Received encryption key (channel: 2, h323.type: 2)
Nov 14 14:27:35 (none) main: 3392270.98 MC I: configureOutgoingChannel(p=129, ch=2): Configuring mode : Video (2): H.261 [email protected] 0k PT(31) (modescontroller says real is: Video (2): H.261 [email protected] 1856k )
Nov 14 14:27:35 (none) main: 3392270.98 MediaStreamController I: creating Video Output Gate with diffServ=0
Nov 14 14:27:35 (none) main: 3392270.99 RTP I: RtpSession_FlowRateReq, (sid=0) rateInBitsPrSec = 1856000, inited = 1, remoteFecSupport = 0, fecIsSupportedLocal=1
Nov 14 14:27:35 (none) main: 3392270.99 RTP I: RtpSession_FlowRateReq, (sid=0) rateInBitsPrSec = 1856000, inited = 1, remoteFecSupport = 0, fecIsSupportedLocal=1
Nov 14 14:27:35 (none) main: 3392271.00 H323Call I: h323_call_handler::handleH323FlowControl(p=129, s=1) Received flow control on channel 'video' (rate: 1856000)
Nov 14 14:27:35 (none) main: 3392271.01 RTP I: TrafficCtrl: Used existing entry (main): id: 2, tcid: 65568
Nov 14 14:27:35 (none) main: 3392271.02 H323Call I: h323_call_handler::handleH323ExtendedFastUpdate(p=129, s=1) Remote requested extended fast picture update for video
Nov 14 14:27:35 (none) main: 3392271.02 MediaStreamController !ER MixerVideo::action: wrong state
Nov 14 14:27:35 (none) main: 3392271.29 MC I: RemoteParticipant::reevalRefMode(p=129,ch=2) set ref [Video (2): vid-raw [email protected] 0k ] q= motion, t60=921600
Nov 14 14:27:35 (none) main: 3392271.36 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Outgoing media is set up for channel 2, sending confirm on open back to stack
Nov 14 14:27:35 (none) main: 3392271.36 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: audio, rtpaddress: rtp/rtcp 92.39.20.156:3230/92.39.20.156:3231 (fwtrav: mode: 0, keepaliveplno: 0, activertp: 0, activertcp: 0, RtpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, RtcpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, mode: Audio (1): G.711mu   0k PT(0) )
Nov 14 14:27:35 (none) main: 3392271.37 MC I: configureOutgoingChannel(p=129, ch=1): Configuring mode : Audio (1): G.711mu 0k PT(0) (modescontroller says real is: Audio (1): G.711mu 64k )
Nov 14 14:27:35 (none) main: 3392271.37 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: video, rtpaddress: rtp/rtcp 92.39.20.156:3232/92.39.20.156:3233 (fwtrav: mode: 0, keepaliveplno: 0, activertp: 0, activertcp: 0, RtpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, RtcpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, mode: Video (2): H.261 [email protected] 0k PT(31) )
Nov 14 14:27:35 (none) main: 3392271.37 MC I: configureOutgoingChannel(p=129, ch=2): Configuring mode : Video (2): H.261 [email protected] 0k PT(31) (modescontroller says real is: Video (2): H.261 [email protected] 1856k )
Nov 14 14:27:35 (none) main: 3392271.37 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: duo, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
Nov 14 14:27:35 (none) main: 3392271.37 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1)Got mode change on a channel that is not open (mediatype: 4)
Nov 14 14:27:35 (none) main: 3392271.37 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: data, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
Nov 14 14:27:35 (none) main: 3392271.37 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1)Got mode change on a channel that is not open (mediatype: 3)
Nov 14 14:27:35 (none) main: 3392271.38 RTP I: Rtp_Ready_doRTPSourceMuteReq(app=0,strm=5) source unmuted
Nov 14 14:27:35 (none) main: 3392271.38 RTP I: RtpSession_FlowRateReq, (sid=0) rateInBitsPrSec = 1856000, inited = 1, remoteFecSupport = 0, fecIsSupportedLocal=1
Nov 14 14:27:35 (none) main: 3392271.38 RTP I: RtpSession_FlowRateReq, (sid=2) rateInBitsPrSec = 1856000, inited = 1, remoteFecSupport = 0, fecIsSupportedLocal=1
Nov 14 14:27:35 (none) main: 3392271.38 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Not sending openSessionCnf upon send mode change
Nov 14 14:27:35 (none) main: 3392271.38 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Not sending openSessionCnf upon send mode change
Nov 14 14:27:36 (none) main: 3392271.81 RTP I: validateSSRC(sid=2) registering new ssrc (0b0afb01)
Nov 14 14:27:36 (none) main: 3392271.82 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:36 (none) main: 3392271.85 MC I: RemoteInputGateImpl::setIncomingModeReport(ig=46,p=129) [Video (2): H.261 [email protected] 0k ]
Nov 14 14:27:36 (none) main: 3392272.17 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialized 1
Nov 14 14:27:36 (none) main: 3392272.17 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 0 w 1280 h 720
Nov 14 14:27:36 (none) main: 3392272.17 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialized 1
Nov 14 14:27:36 (none) main: 3392272.17 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 8 w 1280 h 720
Nov 14 14:27:36 (none) main: 3392272.58 H323Call I: h323_call_handler::handleH323FlowControl(p=129, s=1) Received flow control on channel 'video' (rate: 1856000)
Nov 14 14:27:37 (none) main: 3392272.90 MC I: RemoteInputGateImpl::setIncomingModeReport(ig=46,p=129) [Video (2): H.261 [email protected] 0k ]
Nov 14 14:27:37 (none) main: 3392273.03 TxRateAdaption I: VideoOutputGateImpl::updateDownspeed(og=47): reportInital mediarate = 1856000 bit/s
Nov 14 14:27:37 (none) main: 3392273.03 RTP I: RtpSession_FlowRateReq, (sid=0) rateInBitsPrSec = 1856000, inited = 1, remoteFecSupport = 0, fecIsSupportedLocal=1
Nov 14 14:27:37 (none) main: 3392273.03 RTP I: RtpSession_FlowRateReq, (sid=2) rateInBitsPrSec = 1856000, inited = 1, remoteFecSupport = 0, fecIsSupportedLocal=1
Nov 14 14:27:38 (none) main: 3392274.02 H323Call I: h323_call_handler::handleH323ExtendedFastUpdate(p=129, s=1) Remote requested extended fast picture update for video
Nov 14 14:27:38 (none) main: 3392274.12 H323Call I: h323_call_handler::handleH323ExtendedFastUpdate(p=129, s=1) Remote requested extended fast picture update for video
Nov 14 14:27:38 (none) main: 3392274.46 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:40 (none) main: 3392276.01 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:40 (none) main: 3392276.54 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:41 (none) main: 3392277.66 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:48 (none) main: 3392283.98 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:49 (none) main: 3392285.42 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:50 (none) main: 3392285.94 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:52 (none) main: 3392288.49 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband

thanks for reply.
there are no VCS/MCU or gatekeepers involved. Just using H323 to make direct external calls using ip address.
The other end is a either a Polycom VSX 7000 or HDX 7000.
Should have said we have two SX20 and two C40's and both the SX20's connect with audio only whereas the C40's connect correctly with audio and video. Obviously something has changed since they were working before. Its unlikely that a configuration change has been made on the local SX20 ( would any config changes be in a log file?), so i dont know if the remote endpoint has changed anything ( ie, would changing something like the h323 id or e164 possiby cause an issue on an SX20 but not on a C40).
So i was hoping someone might know if the SX20 behaves differently to the C40 in someway that might cause this or does the log file show the reason why no video is being sent/received?

Multicam Video Rate

Similar Messages

Maybe you are looking for