Multicam - viewing all angles in the sequence

OK, I am a novice when it comes to multicam on FCP.
I can't seem to figure this small thing out...Can you NOT see all the angles of a multiclip while the footage is in the SEQUENCE? I know that you can see all the angles in the VIEWER, but I want to drop the whole 2 hours onto the timeline, and trim and swap angles there. But I can't see all the angles while watching in the CANVAS I have a Convocation, with a line cut and three ISOs, and I just want to cut away to the other angles when, well, I want another angle.
Not possible? How should I approach this?
Thanks,
Shane

OOoooo...thanks Michael! Perfect!
Only...I am stuck with a problem. They shot two nights, and the first night all the cameras matched...so that works great. BUT, they want me to use the SECOND night, and what did they do? They used a DIFFERENT CAMERA that shot a DIFFERENT FORMAT. So I can't multiclip. This is a two hour show.
I might transcode the different camera...I think the time taken to do that would make up for me trying to do it via stacking. Ugh...things can never be easy, huh?
Thanks!
Shane

Similar Messages

Is there a way to view all cameras in the timeline at once without creating a multicam sequence?

Is there a way to view all cameras in the timeline at once without creating a multicam sequence? Is there some kind of window I can open where they will show up? I am scrubbing a timeline and I would like to see all the cameras at once.

The multicam monitor only shows multiple clips at once when they are part of a mutlicam sequence. is there some reason you don't want to use them inside a multicam sequence for previewing?
Here is a possible workaround, if your workflow circumstances will permit it:
Apply a pip preset effect to each clip in the timeline. Use UL, UR, LL, LR presets and up to four video tracks will display at once. If you need to see more than that, you'll need to tweak their position parameters by hand. When you're done previewing them all at once you just need to delete their effects from the Effects Controls panel.
I know it's not that neat or quick, but it will let you see everything at once in the program monitor.

I have one specific library that when I select the "view all clips" in the browser drop down box, FCPX locks up. Rebuild the library? What would be the best method?

Final Cut Pro locking up when view all clips selected in the browser.

Russ H,
Yes, Force quit is the only option. No background tasks running, nothing on FCPX works, save I can move the beach ball around.
All the other menu options work fine. In fact, FCPX works in the library except when I select view all clips in the browser.
I am running Version 10.1.3 . It is only this library that has the problem. I am a new user so I only have three or four libraries so far. Most on the same local external drive.
The only difference I have been able to determine is the library in question has files on my boot drive as well as the local external. Could that be the issue?
Thanks for the prompt reply!

Since installing Lion, no Finder window will open on the desktop. I can see them through "Quick Look" and "View all Windows" in the contextual menu for Finder in the

Since installing Lion, no Finder window will open on the desktop. I can see them through "Quick Look" and "View all Windows" in the contextual menu for Finder in the dock.

Help please!

Why does my video get cut off from all angles in the Program: Sequence?

I just made a video, and after exporting it I noticed my whole video was basically trimmed down.
It was trimmed from the top, bottom, left, and right.
Anyone know how to fix this??
It is also trimmed in the Program: Sequence

What do you mean source material?
I took some footage of me playing a video game, and I captured it using a screen-capture software (Fraps).
The imported material was .avi clips
I still can't get it to work guys, ill try and explain everything I did.
1) Open Adobe Premiere Pro CS3.
2)Click new project DV-NTSC Standard 48kHz
3)Import a .avi Movie I captured using Fraps screen recorder
4) Use the Set In point and Set Out point to get what material I want from my movie
5)Drag it onto the timeline
6) Look at my program: sequence 1, and my movie seems to be trimmed from all angles, meaning if you've ever played a first person shooter game, you cannot see the gun I am holding, but in the movie clip that I recorded earlier, you can a see the gun I am holding.
Does this make any sense?

Project renames sequence and all clips in the sequence when a clip is added

My project is renaming my sequences and the clips in those sequences whenever I add a clip. For example, I have a sequence called "dance section 2", which contains 20 some-odd clips with various names. When I add a clip named "drop from above", the name of the sequence is changed to "drop from above", and the name of every other clip in the sequence is also changed to "drop from above" (video, audio, stills, everything). When I add a clip named "spins", all the names are changed to "spins".
The name of the sequence is changed in both the timeline and the browser, but the names of the other clips are changed only in the timeline. In the browser, they keep their old names. The exception to this is the last clip added before the name changer. For example, if I add "drop from above" to the sequence, and then add "spins", the clip named "drop from above" is renamed "spins" in the browser as well as in the timeline, but the other clips are renamed only in the timeline.
The clips in the sequence also keep their original content - so the sequence looks the same as it did before, but all the names of the clips are changed.
This is only happening in one project. All of my other projects are working fine.
I've tried restarting and deleting preferences. I've also looked at the autosave vault for the project. The backup projects saved after a certain time all behave the same way, and the projects before that time all behave normally. I can't imagine what would have caused this, though, since I've been working on this project all day and nothing's happened to my computer or hard drive or anything.
Also, there are no freeze frames at the beginnings of my sequences (I read another thread with a somewhat similar issue and getting rid of freeze frames seemed to help that person).
I'm in FCP 7.0 on a Macbook Pro.
Thanks in advance for your help!

Welcome to the discussions...
I've had this happen. My guess is that it's related to round-tripping to/from Color, but I can't be sure. IMHO, the sequence is corrupted. I just dealt with it for a while, then rebuilt it by making changes from an earlier version.
Sorry I don't have a better solution, but at least you know you're not alone.
Patrick

When I try to set a default for viewing all folders using the view options, it fails to apply this view to all folders. What am I doing wrong?

I open the 'view options', select the mode of viewing I want, click the 'always open in' and push the use as defaults button... this, by all accounts, should work to apply this mode of viewing to ALL my folders and subfolders... yet it does not.

I've had to work on this a little before it "stuck" to my preference; it appears that if you open a folder within a folder and set the option, it will apply to that and any within that, but not up a level. So you need to make sure you have it set at the top folder level and you have it set like this:
Also, if you have a folder in the dock, you will need to either control click it or - in my case I want column view - you need to Command click the folder and it'll open in column view. I've not liked this "feature" since it was changed in Snow Leopard; previously, you could just click on the folder and it would open the way you had it set.

Is there a way to view all albums in the way you can view all events?

I am finally giving serious consideration to moving over to using albums more. However, I am addicted to being able to see all of my events laid out with key photos. I'm not sure why you can't view albums in this manner - having them show up in a grid format in the main window with key photos for each. Everyone says albums are supposed to be the primary organization tool but having a giant list of 200 Albums down the left that I have to scroll down and down and down through to find something doesn't seem very user friendly to me. And if albums are supposed to be for all your custom-organized photos, then why can't you select a "key photo" for them? If events are supposed to be a dump by date for batches of photos, why would you even need a "key photo" option?

Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html.
OT

How to view all Actions in the Photoshop Actions Panel

My computer crashed and I removed all apps and reinstalled so now none of my actions appear. However I do have a backup file of all of them and want to reinstall but before when I was using cs6 ( Im assuming same thing as CC as it was all on the subscription plan ) I would click actions then the right arrows and it would bring me a big screen of all the actions ( even the ones that were just preloaded in ps ) and it was a big box with all the actions and some options to record etc...Now that box isn't there and it's just a single column drop down menu.

Actions can be loaded and save to any folder. Use the dialog to get to where you have saved your Actions. I never store actions in any Adobe Folder.

Need to add Authorization to view all activity across the organization

Hi !
I need to assign a user the authorization to display ALL activites by ALL users. How do I do it !!
Thanks!

Hi Pratap,
Could you re-frame your question for better understaning.
I understood in this way.
If you want user to have display all. Create a role with copy of SAP_ALL profile and change activity to 03 and assing this role to user.
I could not understand what do you mean by all users?
Cheers
Soma

All of a sudden I can no longer toggle or clip angles in multiclip sequence

Hi,
I've got a project with a number of sequences, videos, angles, etc and all of a sudden I can no longer toggle between angles in the sequence timeline. It was working last night and then stopped and it's still unresponsive. Every time I click to switch an angle or cut to an angle I get the alert beep.
I am not out of disk space and haven't changed any settings as far as I am aware of.
Thanks

Not sure what the deal is...have you added any new software or upgraded/updated anything since this started?
Have you tried opening an autosave version, to see if it works there?
Trashed prefs, run disk utility?
I'm not sure I've ever heard an 'alert beep', so would wonder if the drive is failing.
Can you be a little more explicit about exactly how it 'stopped working'...were you right in the middle of working on it, or had you stepped away for a bit?
Have you tried shutting down, then rebooting after 15-20 minutes?

Is there a way to force a user to view all of Accordion Widget?

Is there a way to force a user to read, or at least view,
all sections of the Accordion Widget? We want to make sure the learner reads
all of the material before advancing to the next slide. Is there a way to do
this? I have searched all over, but I have been unable to find.

No way. This is a static learning interaction, no event that could be used eventually. Personally I prefer offering reading material that is engaging over looking for a way to push the learner to look (reading doesn't mean he understands or grabs it) at all the stuff. But that is my teacher's past, if student doesn't read your stuff, something is wrong with the stuff, not with the student.
If you have to force, you'll have to find another way than the accordion interaction .

Is it possible to view all record of child object in parent detail page.

Hi All,
Could someone please tell me how to view all records of child object in any associated parent detail page.
For example, In opportunity detail page I want to see all lead associated with particular opportunity. As per standard setting I can be able to see only five lead records in opportunity detail page. Is it possible to view all lead on the same opportunity detail page instead of clicking on "show full list"
Thanks in advance.
Manish

There is my code in labVIEW for the moment
See attachments
Dany
Dany Allard
Attachments:
Exemple code SET.JPG ‏47 KB

What are the sequence of function modules executed in payroll result

Dear all,
what are the sequence of function modules executed while retrivieng pryroll result.or
functionmodule sequence in payroll programming.
By
bose

Hi Bose,
The sequence of FM executed in payroll result are
1. cu_read_rgdir ---> from this u will get the country key.
2. cd_read_last -
> from this fm u will identify the seqnr for the latest record and finally for the payroll result
3. pyxx_read_payroll_result.

Apply color correction to the sequence, not clip

Is it possible to select all clips in the sequence, then apply color corrector, or brightness/contrast filter _with a specific setting_ to the whole sequence?
Currently when I select all in the sequence, apply a correction through effects > video ... etc, then change a setting, it will only change the setting one clip from the sequence.
I know it is possible to work around this and do it with one clip and then paste attributes, but if there's another way, please let me know.
Thank you!

Michel,
That's a great idea, why didn't I think of that? Thank you for your fast reply, I got it near instantly on the iPhone and was laughing at how simple and smart a solution you had!
Cheers,
Roman

Multicam - viewing all angles in the sequence

Similar Messages

Maybe you are looking for