MultiCam workflow and buggy behavior (Premier Pro 2014 CC)

What is the best workflow for MultiCam with 2 or more different cameras (different color, gamma, etc.)?
I have used nesting to create one track per camera - then color adjust and then create a nesting of the different tracks.
But then you have to select and copy each segment of the overall nested tracks to get each multitrack clip and put in a bin.
If I adjust color on one track after splitting - is there any ripple or I would have to repeat the above steps?
I also notices that it is buggy - many times when I select Camera A when I go to beginning of sequence - many of the selections have been reversed with reversal again at clip transitions - resulting on exact opposite of what I selected or random changes. Locking the tracks does not prevent this. It seems to be overriding my choices based on some program logic!!
Thanks
M.

1. Create a sequence matching the specs of your footage.
2. Add the media, one camera per track.
3. Manually sync the clips.
4. Create a second sequence matching the specs of your media.
5. Nest the first sequence into the second.
5. Right click the nested clip, select Multi-Camera>Enable.
6. Edit as needed.
7. When editing is finished, go back to the original sequence and do CC and grading work on the original clips.

Similar Messages

  • Premier Pro 2014 will not launch

    I've downloaded Premier Pro 2014 and tried to launch it, but it freezes every time and won't even force quit. I have to hard crash the whole computer to get out of it.
    I've tried reinstalling, setting the permissions to read/write in the Adobe folder in the library, and tried to reset the preferences on launch as described here. But nothing works.
    Also I'm having basically the same problem with After Effects 2014.
    I think it has something to do with Media Core, but I can't figure out how to remedy. Earlier versions of PP CC and AEP CC are both working fine. Just these new versions will not launch.
    Any help would be greatly appreciated.
    Computer is a MacPro, 2.93 Ghz Quad-Core with 10GB of RAM.
    Thanks!

    It's working! Yay!
    Strangely, there is no 8.0 folder in the Plug-ins folder. So I pulled the plugins out of the 7.0>MediaCore folder and then was able to launch PP 2014. After getting it running. I quit PP and dragged the plug-ins back into the 7.0>MediaCore folder and was able to launch PP 2014. And this time it launched with all the plug-ins.
    I was also able now to launch After Effects CC 2014 with all its plug-ins working.
    Is it possible there's a different file structure for PP 2014 Plug-ins?
    Anyway it's working. Thanks for your help.

  • Premier Pro 2014 is very sluggish

    I installed Premier Pro 2014 last week and since then it's been running very slowly with frequent crashes. I have been using Premier Pro CC on a daily basis since it was first released 
    and hardly ever had a problem with it. Very frustrated and disappointed with this latest release - so have now decided to go back to to the more reliable Premier Pro CC.
    I am hoping that this is a teething problem with Premier Pro 2014 - and that soon an update will be released that will make it just as stable as Premier Pro has proven to be.

    So I use the following instructions posted by BobanskyBH and it seems to have worked perfectly!
    In the finder menu click and hold on the GO menu.
    Hold the option button and the User library menu will show up.
    Click the User Library.
    In that folder go to preferences and find the adobe folder.
    Right click on adobe folder and click get info.
    In the Sharing & Permissions section there should be three names. All should say Read & Write next to them.
    Unlock the lock, switch them all to read and write. Then click on the little gear directly under the names or to to the left of the lock and in the pulldown click on "apply to enclosed items. Then lock the lock again.
    Now go to your OS Hardrive and click on Users, your user name, Documents.
    Find the adobe folder there. Right click on adobe folder and click get info. In the Sharing & Permissions section there should be three names. All should say Read & Write next to them.
    Unlock the lock, switch them all to read and write. Then click on the little gear directly under the names or to to the left of the lock and in the pulldown click on "apply to enclosed items.
    The lock the lock again.
    Wait 1 minute.

  • Premier pro vs premier pro (2014)

    What is the difference between the PREMIER PRO vs PREMIER PRO (2014).    I try to stay updated on my Mac with CC and now have what appears to be duplicate applications, i.e. a regular CC version of the apps and a (2014) version.   I don't understand.

    Premiere CC and Premiere 2014 are two seperate programs. They are not duplicates.
    Premiere 2014 is and update or upgrade whatever you want to call it of Premiere CC with all new features.
    Below a link to all those new features.
    Adobe Premiere Pro Help | New features summary

  • How to import 4k cinema dng on premier pro 2014

    how to import 4k cinema dng on premier pro 2014 ?

    Wow.  Thanks Colin.
    When I follow your approach, I don't get the same "sequence preset" dialog box popping up.    
    FU question, though, the motion is frequently jagged.  Is there a way to smooth out/increase the quality of the rendering?    I have 16gb ram, Mac Pro.   which is able to handle iPhone video rending fine in quicktime.   (I've tried rendering for "performance" and "memory" but both seem to produce, eh results.).
    Michael

  • I am using InDesign CC and added Garamond premier pro font. This has worked for months, now suddenly my entire book is  highlighted in pink and my font is missing! I get the message that the font is currently unavailable on my computer, how can i get it b

    I am using InDesign CC and added Garamond premier pro font. This has worked for months, now suddenly my entire book is  highlighted in pink and my font is missing! I get the message that the font is currently unavailable on my computer, how can i get it back?

    BlazingRiver wrote:
    So my computer is running on OSX but my question is if any of the viruses on my windows partition can still run and communicate information to their 'master' as there is still a supply of electricity? Sorry if its obvious.
    Here's a positive thing: Windows viruses can't run on OS X, but they can be transferred from OS X to other PCs (only if you have them on the OS X volume).
    BlazingRiver wrote:
    1. How could a trusted source e.g. Google and Steam contain viruses if they are downloaded from the original source? and
    You could get a virus from a different source that infected Steam and Chrome without any problem. Viruses normally try to infect as many files and programmes as possible.
    BlazingRiver wrote:
    2. Can iOS devices get viruses and I know this is probably in the wrong but 3. What anti-virus scanner and remover tool do you recommend for windows. The only one I am familiar with is Kaspersky?
    iPhones, iPads and iPods touch can't get viruses but they can transfer them to other PCs. For Windows, I recommend Microsoft Security Essentials

  • Premiere Pro CC and the New Mac Pro (2014)

    I'm expecting delivery soon of a new Mac Pro, nicely loaded, which I purchased mainly because of all the work I do with video. Yet, I read in a review that Adobe Premiere Pro isn't optimized to take advantage of the new Mac Pro, won't run faster, and I'm better off using Apple's Final Cut.
    1. Is this true?; and
    2. If so, will Premiere Pro be updated any time soon to run best on a 2014 Mac Pro?
    My new Mac Pro will have the following configuration:
    3.5GHz 6-core with 12MB of L3 cache
    32GB (4x8GB) of 1866MHz DDR3 ECC
    1TB PCIe-based flash storage
    Dual AMD FirePro D700 GPUs with 6GB of GDDR5 VRAM each

    My main problem is that when i export using gpu open gl it crashes hard boot the mac pro. A 3 min timeline with 4k footage n a bunch of color grading.  I get lucky if the timeline is shorter. But i think it is a gpu issue n my mac must be fixed. Currently under apple tech support. N my case is unique. No one has had the same issue and that makes it harder for me to figure the isse and to apple figure the issue.
    If i export using software only mercury then the export goes smoothe no mattrr how long. But that defeata the point of owning a mac pro with 2 GPUs
    Enviado desde mi iPhone
    El 29/03/2014, a las 01:51 p.m., BanksMeador <[email protected]> escribió:
    Re: Premiere Pro CC and the New Mac Pro (2014)
    created by BanksMeador in Premiere Pro - View the full discussion
    I have had my 12 core 2014 Mac Pro for a couple of weeks now, and I'm not very impressed with Premiere CC performance with 4K R3D on a 1920 x 1080 timeline.
    I understand that there may be an update soon that will take adantage of the CPU's and GPU's when it comes to the complex task of de-bayering the R3D footage, but it's just not there now.
    I get similar playback performance to what I experienced on my 09 Mac Pro tower.
    Any insights on getting better playback performance in this scenario would be greatly appreciated.
    Thanks!
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6253414#6253414
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6253414#6253414
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6253414#6253414. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Pro at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Premier Pro 2014 opens Audition CS6 when editing audio clip from Premier

    I own Adobe CS6 Master Collection installed (for legacy projects) and I also have the CC subscription. When I am running Premier Pro CC 2014 and then try to edit an audio clip in Audition the CS6 version of Audition loads rather than the CC 2014 version. Any help or thoughts on why this is happening would be appreciated.
    KR

    I detected this with photoshop--I think its an OS issue--The OS doesn't appear to recognize the two versions are different.  In my case, I had PSP CC loaded, but then loaded the 32 bit version of PSP CS6 (so I could scan directly into the program using "IMPORT")  Windows changed the default to the 32 bit version.  When I tried to change default using windows, windows would not show the CC version as an option--just the 32 bit version.  Without editing the registry, I couldn't find a way to force windows to ignore the 32 bit version and open the CC version.  My workaround was to always open the CC version from the icon and then click on the file I wanted open.  It appears that if any version of the program is already running, the recognized default won't open.  This might work for you on Audition.

  • Adobe Premier Pro 2014.1 will not download

    I have 4 identical MacPros. RAM, processors, video cards are all identical.
    When I ran the update from the Creative Cloud app, all computers updated to 2014.1, except 1 machine. it still had the previous version of Premier Pro.
    Thinking that it may be an ID, or preference thing, I completely uninstalled all apps using the Creative Cloud app, and then ran AdobeCreativeCloudCleanerTool to find any left overs.
    I restarted the machine, then reinstalled Creative Cloud app, and then used it to download Premier Pro, and it still downloaded the previous version!
    I then completely wiped the machine, did a clean install of the OS, Downloaded an installed CC app, then downloaded Premier Pro, and again it downloaded the previous version!!
    I know there is probably a very simple answer to this problem I'm having, I hope. I need all 4 machines running the same flavor of Premier Pro. Any Ideas?

    Hi Skwent,
    Please try to rename AdobeUpdaterAdminPrefs.dat to AdobeUpdaterAdminPrefs.dat-old from the below mentioned location.
    Location: <Startup Disk>/Library/Application Support/Adobe/AAMUpdaterInventory/1.0/AdobeUpdaterAdminPrefs.dat
    Please revert in case the problem still persists.
    Thanks,
    Atul Saini

  • CS6 workflow (Photoshop, After Effects, Premier Pro)

    Hello, I'm new to CS and have been learning quite a few different programs over the past few months regarding post-production.  I've primarily been using Photoshop, After Effects, and Premier Pro.  I have noticed there are tons of different ways to work within and across these programs through the CS package.  Because there are so many ways to accomplish an end result, I was unsure what is the right way to edit or manipulate video footage.  For instance, if I plan on using after effects to do color correction using color finesse, or matte painting and rotoscoping, what order should I open the files and change them?  Should I start in premier and then use AE, or should I change in AE and then import into premiere?  I noticed not all AE changes are accepted in Premiere. Same question goes with any changes to footage in photoshop as well.  Any advice would be great or at least a direction to look to get resources to help with my workflow.  Thank you.

    You'll get way more feedback in either PP or AE forums than you will here.
    Bob

  • Can not re download premier pro 2014

    i have uninstalled premier pro cc 2014 and now want to reinstall it but the cloud wont let me.  it is possible i delete the app and didn't uninstall properly.

    Log out of the Cloud, restart computer then log in.
    See if that will do the trick.

  • Just loaded CS5.5 Production Premium for Mac and cannot get Premier Pro to open-error messages

    Just loaded CS5.5 Production premium onto my iMac and I am getting an error message when I try to open Premier Pro i.e., [/Volumes/BuildDisk/builds/Mulder64/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../../S rc/DirectoryRegistry.cpp-283].  I am finding similar issues with Encore.  Haven't been able to get through to Adobe help as yet, anyone have an idea?

    Which language is your default system language set to? This is critical as you may have installed support for langauges that your version of CS cannot handle. The common fix is to choose File --> Info or File --> Explore Package and remove e.g. Asian languages...
    Mylenium

  • Multicam Sequence Audio Editing in Premier Pro CC

    I have synced up all my video clips via audio (new feature in CC) and have gone through the whole video, selecting which shot I want at each point in the wedding ceremony.  However, I have 15 channels of audio and not one of them is the be all end all audio clip.  In fact most of the audio clips don't have any audio until a certain part in the service (for example, a singer's mic doesn't have audio till the person starts singing).  Some of my audio channels have terrible natural sound and I only needed the audio so that I could sync it up.  Calling Adobe, the guy told me I needed to come here because he couldn't help me.  I need help FAST!

    There's no question in your post. Only a statement.
    Not sure what you're wanting to know, but for what it's worth here's how I do multicam and have full control over ALL channels of the audio within the same timeline as the nested multicam clip. I sync all my clips stacking them on the timeline. I then ALT+Select ONLY the Video clips and right-click and select NEST. Now you should have one video clip and all your audio channels still laid out. Next, right-click on the nested video clip and select MULTICAM>Enable. Done. Now you can do your normal multicam edit and still have full view of your audio channels and just keyframe them off when you don't want to hear them, etc. Not sure if that answered your question, but then again, there was no question so hope this helps!

  • Problem Export/Encodind Premier Pro 2014 and MediaEncoder

    Good afternoon.
    Faced with such a problem.
    After updating to version 2014 Premier, MediaEnsoder began to issue an error on export. Black stripe on export or convert your files into MXF format 1080i.
    How to avoid it and what to do?

    So I use the following instructions posted by BobanskyBH and it seems to have worked perfectly!
    In the finder menu click and hold on the GO menu.
    Hold the option button and the User library menu will show up.
    Click the User Library.
    In that folder go to preferences and find the adobe folder.
    Right click on adobe folder and click get info.
    In the Sharing & Permissions section there should be three names. All should say Read & Write next to them.
    Unlock the lock, switch them all to read and write. Then click on the little gear directly under the names or to to the left of the lock and in the pulldown click on "apply to enclosed items. Then lock the lock again.
    Now go to your OS Hardrive and click on Users, your user name, Documents.
    Find the adobe folder there. Right click on adobe folder and click get info. In the Sharing & Permissions section there should be three names. All should say Read & Write next to them.
    Unlock the lock, switch them all to read and write. Then click on the little gear directly under the names or to to the left of the lock and in the pulldown click on "apply to enclosed items.
    The lock the lock again.
    Wait 1 minute.

  • Missing database, binding and server behavior w/CW 2014.1, extension mnger won't work.

    Following instructions for downloading Adobe Extension Manger and looking for the .zxp or .xzp files doesn't work with my CW 2014.1 CC. There are NO files with those extensions anywhere in my program folders. This is frustrating being a new customer. I PAID lynda.com for turtorials, after I PAID Adobe for software and now I'm at a standstill. Apparently Adobe doesn't want to talk to their end-users. Has anyone else had this problem? I desperately need to get php and Mysql working for one of my paying customers.

    I was pointed in the direction of using PHP and MySQL for database development
    PHP and MySQL are correct, but the connection between them should be through mysqli or PDO, not the mysql extension used by Dreamweaver server behaviors.
    There are many good tools for creating database powered websites, but it can be done with just Dreamweaver and the tools included with the free XAMPP software package. That package contains the Apache web server, MySQL, PHP and PHPmyAdmin (which is a database interface).
    Get the book PHP Solutions by Powers. It will get you going.

Maybe you are looking for