MultiCamEdit preview layout in CS6 changes.

I'd appreciate some help- with this . First time this has happened. I'm working on a 3 cam MultiCamEdit. Been doing this every week for about a year now and all of a sudden, the layout changes.
Maybe you can suggest a way to reset it back. I did a "normal" CS6 reset using the "SHIFT" as I launch. Didn't help. Tried to drag and it didn't work. Maybe I need help with the dragging idea??
As you can see the two frames over one original gives me a larger "main frame" but the main thing is that the three cams are larger and easier to view.
Here's the original two frames over one frame. I like this configuration...........
Now, all of a sudden today, when I open the MultiCamEdit for this project, I get all three frames on the top row. Any ideas how I can get back to the two over one configuration?
I don't like this.

Thought I'd try again for an answer. Anyone ?

Similar Messages

Converting Smartform into PDF preview layout

Hi ABAP experts,
We have converted an existing invoice layout smart form into PDF layout in print preview mode. However, we have an issue with PDF layout alignment. Earlier, it used to print the documents correctly (layout is aligned properly at the middle of the page). But when use this 'PDF' preview layout (triggered from smart form) the layout is left aligned/ larger right margin (but not at the middle).
We have gone through the existing forum links on this PDF layout generating from smart form. But no luck on this left alignment issue. Do we need to modify the OTF data that is being populated in the layout. Can it be modifed with the position of the layout dynamically. Please advise.
Technical team has used "CONVERT_OTF_2_PDF" to populate the OTF data.
In SAP note # 323736 (issued in 2006), the below limitation was mentioned. But do we have any way to resolve this page alignment issue.
Page size for SAPscript/SmartForms: PDF conversion uses the page format from the form definition as page size for the PDF document. If this has been defined larger than the page size that is actually used (for example for INCH12, INCH11 and so on), a reduced document or a larger right margin are the
result when you view/print in Acrobat Reader.
Thanks in advance.
Regards,
Satya

Hi Satya,
'We tried that option of "PDF!" but it didn't work for this smart form. Do we need to include/activate any option for this in the smart form.'..What do you mean by it didn't work for this smartform.?
Execute your smartform and when you are in the print preview mode of the form means you get the output, then type PDF! in the command and hit ENTER. A popup will get displayed if you are using windows 7
or Allow and decline type of radiobutton option will be displayed if you are using Windows XP. So just click Allow and your smartform output will be displayed in pdf. Now you can save the pdf output file while clicking the save option in PDF. Your smartform output will be aligned properly in the PDF.
You don't need any activation or any FM for converting the output in pdf for this.
Basically, we do this to attach the smartform output in test plan.
NOTE: This is for only to get the output in PDF while you are in Print preview of the form.
Regards
Syed

When I close CS6 changes in settings are not saved. Reverts to default settings on reopen. Why?

When I close CS6 changes in settings are not saved. Reverts to default settings on reopen. Why?

Sorry Photoshop -- Problems solved -- I read the details -- turns out you need to make changes with no files open for the preferences to apply to all files.
Thanks, Al

Using 'Preview Layouts' on specific objects

Hi everyone,
I would want to know if it is possible to import CR layouts in SBO, and use it with the menu "Preview Layouts" on personalized objects.
When I try to import a CR layout with the Report And Layout Manager of SBO, I choose my RPT file, check the Layout radio button, and open the List Of Documents. But in this list, there are no items which correspond to my specific objects, so I can't link my report and my objects, and when I open a record of my object, the menu "File -> Preview Layouts" is disabled.
So my question is : is it possible to create new Document Types to be able to link my layout and my objects? Or any other solution which can allow me to use "Preview Layouts" on my specific objects?
Thanks.

Hello Charly,
There is a way to add layout on User object. Using a piece of code, you can add your report in the table RDOC putting it in a BLOB field
SAPbobsCOM.ReportLayoutsService rptService = (SAPbobsCOM.ReportLayoutsService)oCompany.GetCompanyService().GetBusinessService(SAPbobsCOM.ServiceTypes.ReportLayoutsService);
SAPbobsCOM.ReportLayout newReport = (SAPbobsCOM.ReportLayout)rptService.GetDataInterface(SAPbobsCOM.ReportLayoutsServiceDataInterfaces.rlsdiReportLayout);
newReport.Author = oCompany.UserName;
newReport.Category = SAPbobsCOM.ReportLayoutCategoryEnum.rlcCrystal;
newReport.Name = "APRS";
newReport.TypeCode = "TypeCode";
SAPbobsCOM.ReportLayoutParams newReportParam = rptService.AddReportLayout(newReport);
newType = rptTypeService.GetReportType(newTypeParam);
newType.DefaultReportLayout = newReportParam.LayoutCode;
rptTypeService.UpdateReportType(newType);
SAPbobsCOM.BlobParams oBlobParams = (SAPbobsCOM.BlobParams)oCompany.GetCompanyService().GetDataInterface(SAPbobsCOM.CompanyServiceDataInterfaces.csdiBlobParams);
oBlobParams.Table = "RDOC";
oBlobParams.Field = "Template";
SAPbobsCOM.BlobTableKeySegment oKeySegment = oBlobParams.BlobTableKeySegments.Add();
oKeySegment.Name = "DocCode";
oKeySegment.Value = newReportParam.LayoutCode;
FileStream oFile = new FileStream("D:\\DEV\\Layouts\\Demo.rpt", System.IO.FileMode.Open);
int fileSize = (int)oFile.Length;
byte[] buf = new byte[fileSize];
oFile.Read(buf, 0, fileSize);
oFile.Dispose();
SAPbobsCOM.Blob oBlob = (SAPbobsCOM.Blob)oCompany.GetCompanyService().GetDataInterface(SAPbobsCOM.CompanyServiceDataInterfaces.csdiBlob);
oBlob.Content = Convert.ToBase64String(buf, 0, fileSize);
oCompany.GetCompanyService().SetBlob(oBlobParams, oBlob);
Then you have to associate your form to the reportType using this line of code in your form's constructor:
oForm.reportType = "ReportType"
Hoping that can help you
Best regards

Licence cs6 changed in a trial

licence cs6 changed in a trial. How can I get my cs6 back. My activationcode does not work anymore

Please refer:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivat ion-products.html
Click the Chat Now button at the end of the page and talk with a live agent who would resolve it ASAP.
Regards,
Ashutosh

Problems with preview of illustor CS6

i have problems with preview of illustor CS6. When i place a illustor in indesign the preview is not correct. same when i save illustrator to pdf

Hi Heiko
Did you create a package for enterprise deployment?
Creative Suite Enterprise Deployment | Adobe Developer Connection
The Adobe Enterprise packaging tool varies depending on which version of CS or CC you are packaging.
Also you need to have a license/serial number that supports the use of enterprise deployment tools. These tools allow you to create an install package that is already serialised and doesn't prompt for AdobeID where you license agreement supports such deployments.
Also what image deployment system are you using to which client OS.
The process is pretty simple now with the improved tools from Adobe, still some improvements they can make but it's a lot better than in the past.
Good luck.

Hello, I update my mac pro to 10.10. Why the photoshop cs6 change to slowly now. When I change the tools like brush to command+Z, It's will be freeze a while. why? and how can I improve?

hello, I update my mac pro to 10.10. Why the photoshop cs6 change to slowly now. When I change the tools like brush to command＋Z， It's will be freeze a while. why? and how can I improve?

what a long post....Apple, btw, does not read this stuff, so ranting, raving, and complaining here might make you feel good, but it does no good at all. That being said, I, too have a Mac Pro Quad Core Xeon with 6 gigs of ram and an nVidia 8800 GT graphics card (not as good as yours, alas) and I've had no problems at all with it. Yes, it doesn't have Thunderbolt, but maybe we Mac pro owners will get lucky and someone will come out with an adapter (probably not). No, you probably don't have to throw away your Mac Pro, but if you do, I'll take it, for a small "recycling" fee >:-) That was a joke. Yes, the Mac Pro's future isn't quite clear, YET. Hopefully that will improve very soon. As for not being able to upgrade to Mountain Lion. Don't worry about that too much, Nobody is forcing you to do that. Your Mac Pro won't quit working if it isn't installed. From what I've heard, you should give the new OS a chance, and wait to get it, in case there might be some bugs, or stuff not working with the new OS, which has been known to happen. Yes, we Mac Pro owners don't like being treated like mushrooms-kept in the dark, and being fed......... but Apple is Apple and it will do what it does, and there is nothing you or me can really do to change that. All I can say is....trust, have faith, be patient, go for a walk, do something else to take your mind off of this problem. IF apple decides to drop the Mac Pro for good, and that's a big "IF", I think they will anger a whole bunch of people
which isn't good. However, that hasn't happened...YET. Let us hope that it doesn't
John B

Saving back from CC17 to CS6 changes all complicated brushes into expanded objects.

saving back from CC17 to CS6 changes all complicated brushes into expanded objects. Also brushes vanished from brush pallet

http://helpx.adobe.com/illustrator/using/whats-new-17-0.html#Images%20in%20brushes
Since the Brushes were rewritten for CC, backsaving them (as well as other items) will cause them to be expanded. No way around it.

Dynamic Grid Layout Dreamweaver CS6

The Dynamic Grid Layout is the main reason for purchase new version of Dreamweaver .
Dynamic Grid Layout in Dreamweaver CS6 does not work nice, columns are not modify with the mouse, jumps back to the old postition. On You Tube it all looks so very easily, but in practice is all very sloppy about ...
Ask the forum, Do I have to drag a button to hold...
If I adjust the width on the left side of the div, I left a red band that set ....
Where is a make proper manual to find ....

Thanks for our suggestions, i keep trying, but Easy NO…..
Geert
Van: Nancy O. [email protected]
Verzonden: donderdag 10 mei 2012 17:11
Aan: Geertskigek
Onderwerp: Dynamic Grid Layout Dreamweaver CS6
Re: Dynamic Grid Layout Dreamweaver CS6
created by Nancy O. <http://forums.adobe.com/people/Nancy+O.> in Dreamweaver - View the full discussion <http://forums.adobe.com/message/4394107#4394107

Dragging a single image from mac Preview to InDesign CS6 doesn't work but 2 or more images does?

I usually take anywhere form 2500 to 5000 photos in any single day's session. Because of this, I need an easy way to sort through them and grab just the one's I need to import to my InDesign "book". I have been using CS3 for years now, and what I always did was open up Preview on my Mac to browse all my days photos. Then when I found a good one, I would simply drag that single image over to my opened InDesign screen and just drop it into a page. I would then go back to Preview and continue this procedure until I had looked through all the days images. I could even drag multiple images over and once I was over InDesign I can just click each image and pop them into various pages with ease. Then I upgraded to CS6 and I've hit a kink in the works. When I drag over a single image to InDesign, before I drop it into the page my mouse pointer looks like 3 tiny paste images (the little rectangle with the folded down upper left corner). If I release my mouse to drop the image into InDesign, it just flys back to Preview and doesn't drop into InDesign. Now if I get 2 or more images from Preview, this process works just like it always did. But 1 single image... never. I've tried holding down command, shift, control, option, and combos of those buttons to see if anything changes and it never does. I always get the mouse icon with 3 little paste icons. In CS3 if I dragged a single image it would only show 1 paste icon and 3 icons if I dragged 2 or more, but not in CS6. Is there a setting I'm missing or a preference? I've tried looking through everything that I can find to no avail. There has to be a way??? Thanks!

Use Bridge instead
good luck

Layout of site changes when I publish it?

Hi there,
I have just updated my adobe muse site but when I publish it through the FTP host like I usually do, the layout changes?? When I preview it, the site is fine but it just isn't publishing correctly.
Here is the site www.thspa.com.au
Thank you in advance for your help
Kindest regards,
Hannah xx

Thank you so much for getting back to me : )
I exported it as HTML and it opened fine...looked perfect??? Could it be an issue with the host?? The titles are on a wierd diagonal when I open it in the browser??? I have even uploaded it to the FTP host a few times coz I thought it was just a one off glich but its still playing up?
www.thspa.com.au is the website.
Kindest regards,
Hannah

Financial Reporting in Workspace: POV preview does not reflect changes

Hi all
after changing a report with FRStudio (a dimension has been moved to the pov) and saving it back to the repository (with the same name) we have a problem with the POV. We only have workspace users without limitations on their POV; the log in and immediatly try to open the modified report. All of them see the POV Preview, but: some of them immediatly saw the new dimension in the pov preview (so 4 boxes in this case); some of them continued to see the previous ones (3 boxes); some just see a couple of dimensions either new or old...
the only workaround I found is to create a new database connection (from workspace) to the same Essbase application and change consequently the connection the report points to. but this is not a practice applicable in a production environment... do you have any suggestion?
thank you

Hi Ruth,
My advice is dont use the Designer. The CRM Designer isnt supported by SAPCRM 5.0. Try to do all the configuration in blueprint tables.
If you have changed the layout with Designer and after you do the refresh of your fieldgroup structure then you always the designer changes will be lossed.
Regards,
Manuel
PD: I hope you can understand me.

Creating new website with Fluid Grid Layout in CS6 - CS3 Transitions problem

I am making my second website with Fluid Grid layout and as with my last one, it seems I can't use CS6 transitions. Each time I go to add a new transition, Dreamweaver stops working and shuts down. Should you be able to use the transitions function with CS6 transitions or not? In the end, what I want to do is create a behaviour where one image is swapped with another with a click (not a rollover as it won't work on mobiles, I believe).
Thank you

Add a link to jQuery's Latest Library to your document <head> tags.
<script src="http://code.jquery.com/jquery-latest.min.js"></script>
Add the jQuery function code to <script> tags in your document. I typically put them right above the closing </body> tag.
<script>
$(document).ready(function () {
    $("#one").click(function () {
        $("#one-a").toggle('slow');
    $("#two").click(function () {
        $("#two-a").toggle('slow');
    $("#three").click(function () {
        $("#three-a").toggle('slow');
</script>
</body>
As to why DW is closing you down, I don't know. That's not an expected behavior.
Without seeing your code, I'm going to guess that your CSS transition logic is incorrect or you're attempting to add transitions to the FluidGridLayout.css which is never a good idea. Always use a separate, external style sheet for your manually added content styles. Changes to either boilerplate.css or the temperamental FluidGridLayout.css files can result in problems.
Nancy O.

Preview and Photoshop CS6

This deals with opening images. I would like to use Apple's Preview to open my original .jpg files. Once I have corrected the files in Photoshop CS6 I would like the files to open in Photoshop CS6. Is this possible even though the files have the same extension?

Thank you for the idea, however this did not help me. In previous OS I was able to open my unedited my .jpg files in Preview. Once I opened the .jpg in Photoshop and saved the file it would then open in Photoshop if I double click on it while the other .jpg files that were not edited still opened in Preview. This has now changed after upgrading to Mountaln Lion and updating to Photoshop CS6.
Thanks again for your idea.

When I send or receive e-mail, the mail gets changed significantly from its' original form.....typestyle, size of letters, symbols, page layout, color, everything changes.....is there a way to fix that?.....

When I send or receive e-mail (Thunderbird).....the mail gets changed significantly from its original form.....typestyle, font size, symbols, page layout, color.....everything changes.....is there a way to fix that so my the original form of the mail is not changed?.....

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

MultiCamEdit preview layout in CS6 changes.

Similar Messages

Maybe you are looking for