Multicamera edit problem in Premiere Pro CC

I have a multicamera edit project, the source and target timelines are set up as required. I've performed the multicamera edit and saved the file. When I open the saved file, only one track in the source file shows up in the target sequence. All tracks in the source sequence are visible, the file was saved exactly as it was when the multicamera edit was performed. It looks like a bug to me.
Steve Keller
Differential Films

I just updated to the latest CC, and it looks like the problem has been fixed!
Thanks.

Similar Messages

Mpg4 editing problems in Premiere Pro CS5

I've been working with pp CS 5 or CS5.5 for a little while, and have hit a snag.
1. I have a file that is an mpg file, created a long time ago, and has bad color balance. over an hour
2. I imported it into After Effects, tweaked the colors, and exported it as an mp4 file.
3. It plays just fine.
4. I created a new project in PP, created a new sequence, imported the mp4 and put it into the time line. It plays fine. I need to clip spots out.
5. I set an in point and an outpoint on the main screen, and can see the bar with the timing ticks show gray between the inpoint and outpoing.
The timing marks are on the timeline, but don't extend down across the video and audio tracks. I locked and synced the tracks.
Chosing ripple cut, I can move the inpoint to the outpoint, but it still plays the 15 frames between the in and out point. I have used the extract icon on the main preview screen where I set the in and out, and still it doesn't delte anything. I was playing around with some other section trying
to delete them from the sequence, and it says that all frames are in use.
I know this is pilot error somewhere. It isn't working like the web tutorials show. Is this because this is a compressed MP4 rather than an MPEG? There is only 1 clip (the entire file) in the project.
The goal is to simply delete some bad sections where the talent hems, haws, makes a mistake and corrects himself etc. I want to delete them and close the gap. Any help as to what I missed would be appreciated.
Cheers
Woody

I know this is pilot error somewhere.
I would recommend reading the PDF file. Go through from start to finish, in sequence. Try each new thing as you learn about it. Look up any words you don't understand as you go.
Once you have the data on how to use the program, chances are you will know exactly where things went wrong.

Premiere Pro 7.1 serious Multicam Editing problems

Hello, I am posting here because the bug report I filed one week ago to Adobe didn't give a result -no response at all from the bug department.
I have two serious Multicam Editing Problems.
PC Configuration: Core i7950, Asus P6TD Deluxe, 12GB DDR3 1600MHZ, Quadro K4000, SSD for the system, Seagate Constellation 7200rpm for video editing.
1. When multicam mode is on at the program monitor, I press play and the program doesn't respond at all. The timeline plays till the end and the program just doesn't let you do anything but wait until playback of the whole timeline is over. Then the program works again (no "not responding" message in Windows).
2. Sometimes the waveform doesn't even appear at the multicam audio clip. I read in other forums that this problem is found specifically at Premiere Pro version 7.1 (October release).
I would be grateful with your help.
Thank you,
Stavros Symeonidis

The media is always a combination of HD .MOV (dSLR footage and .MTS (from my Sony Vg-30). However, I also tested it with .mpeg files created by "match sequence settings". GPU acceleration is always on, as I use nVidia Quadro K4000 with the latest drivers (331.82).
I always create the multicam sequences manually and the problem occurs with any amount of camera angles.
The problem was not solved by reinstaling Windows (7 and 8). In general, I have no other issue with my PC system, except from this specific one.
It doesn't appear always, however it will definitely happen if you press twice or three times the letter L, to fast forward the preview of your Multicam Sequence.
I remind you that this only happens when multicam monitor is toggled at the program monitor.
Did all these help at all to even reproduce this situation?
Thank you,
Stavros Symeonidis

Strange audio problem in Premiere Pro CS6

Hi
I have encountered a very strange problem. I am editing a documentary film in Premiere Pro. All material has been shot on the Sony FS 100 camera - imported into PP with the Media Browser. In one interview the last part of a clip has corrupted audio. At one point on the timeline the audio stops playing, and it sounds like a scratch on a vinyl record - two words repeating themselves to the end of the clip (See screenshot of timeline). The images are as they should. When I open the Avchd source clip in VLC the audio is working. When i Import the clip into Final Cut 7 using Log and Transfer the audio is working. My only other option would be that there is a software problem with Premiere Pro CS6. Any ideas of how to fix this issue?
Version PP: 6.0.1
Source footage: MPEG-4 AVCHD (1080/25p - Sony FS100)
Version mac: OS x 10.8
Model Name:     Mac Pro Mid 2010
Processor Name:     Quad-Core Intel Xeon
Processor Speed:     2.4 GHz
Number Of Processors:     2
Total Number Of Cores:     8
Memory: 20 GB
Graphics Card: NVIDIA GeForce 570 GTX
Third-party I/O: Matrox MXO2 with Max
Mercury Playback Engine: Software mode

One similar, potential problem, that can develop, is when the Conforming process is interrupted, before it completes 100%.
A quick way to rule that out, would be to navigate to the Media Cache files, and Delete the CFA and PEK (Waveform Display) for that Clip, outside of Premiere Pro. Then, when you launch PrPro and Open your Project, the program will recreate both of those files. There is a little progress bar, that many do not notice. Let it complete 100%, before even touching the computer. Test.
I hope that it is as simple as that.
Good luck,
Hunt

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps freezing and Crashing. A simple thing like leaving the project idle for about 15 minutes, you come back and find that it has frozen. Also if you drag out a clip on the timeline you will find that the whole application freezes. Any possible solutions would be much appreciated.

Could be several factors at play here. This ARTICLE might give you some tips on getting your computer ready for an editing session. Note that there are some added tips on Win7, thanks to Black Viper, near the end.
If nothing is helping, then the tips in this ARTICLE might help you find some clues amongst the breadcrumbs left behind with a hang, or crash.
The link in this ARTICLE will give you some general troubleshooting tips.
If nothing improves, then please post back with more details. This ARTICLE will give you tips on what would be helpful.
Good luck,
Hunt

Multicam editing problems with RT

I am having an issue in Final Cut Pro with editing with the multi-cam editor. We are us-ing a G5 Quad with 4.5 GB of Ram. We selected 4 clips from the Browser, control clicked and chose "make multiclip". Then dragged the Multiclip in to the viewer window, or double clicked it to get it there. Dropped the multiclip to the timeline. Played the Clip, and chose our views in real-time. The video on the Canvas cuts out when we made a new selection. There were cuts made, but they did not show up in the browser. Then we had to play the clip back to get the cuts to show up. I know this is not how it is supposed to work. With the Lesson files in the Final Cut Pro book, you are able to cut and see the edits in real time. I have also seen this done on a less powerful machine than what we are using. Also I have the RT set to Unlimited, and Dynamic. Any Suggestions?

What do you mean with "There were cuts made, but they did not show up in the browser"? The cuts are not supposed to show up in the browser. Did you mean the timeline (your sequence)?
Have a look at this excellent article at Ken Stone's Final Cut Pro Web Site
The Essentials of Multicam Editing in Final Cut Pro, by Steve Martin

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR

Kindly explain the exact configuration of Video Editing Suite: Adobe premiere pro CS6.1, its price in India and if it is also equipped to edit photographs

Kindly explain the exact configuration of Video Editing Suite: Adobe premiere pro CS6.1, its price in India and if it is also equipped to edit photographs too.

This is a user to user forum. We are not Adobe. For pricing information, you need to contact Adobe Sales in India.
Premiere Pro is just for editing video. Photoshop or Photoshop Elements is for editing photographs.

Mask problem in Premiere Pro CC 2014

Hello!
I have a strange problem with the mask tool in Premiere Pro CC 2014, and made this video to explain the problem.
Hope someone can help me.
Thanks a lot
/Per Haar
Mask problem in Premiere Pro CC 2014 - YouTube

But the whole point is that I am not able to place the mask properly because of the strange way it behaving. The purpose of a mask is that it should affect the area it is located above and not somewhere else, and it should also fill the entire mask and not only a spot at the center of the mask area.
It has nothing to do with the order of things, or if I turn up feathering or extract the edge. It's all about the wired way it applys it self.
If I apply and drag the mask to the corner, it should affect the corner and not somewhere near the center of my footage. As it is right now I have to zoom out to 25% and drag the mask way out of frame to affect the corner of my footage.
/Per

How would you edit 4k in Premiere Pro CC and export in 2.5k and 1080p (all within premiere pro, is it possible?), how would you edit 4k in Premiere Pro CC and export in 2.5k and 1080p (all within premiere pro, is it possible?)

how would you edit 4k in Premiere Pro CC and export in 2.5k and 1080p (all within premiere pro, is it possible?), how would you edit 4k in Premiere Pro CC and export in 2.5k and 1080p (all within premiere pro, is it possible?)

Edit 4K and export what ever you want from AME

Multicam Editing Problem during Export Pr CC

Hey guys, first post.
i have been working on a pretty long multicam project (About 1h45m) in Premiere Pro CC
I was all done, and during export in Media Encoder i noticed that after about 45m of rendering, the preview window was still showing the beginning of the video. Upon further inspection, i noticed that the video appeared to be Looping. Sencing that something was wrong, i cancelled my render and reopened my project.
when the project reopened i could see that after a couple of edits, there were little white triangles and the top of the clips. I need to stress that before i started rendering, these triangles where not there.
And yes, when i played through my sequence, at every edit (camera change) the multicam clip would play from the beginning again. i have tried to remove everything after where this problem occurs and then drag the footage out. It does allow me to do edits again and it works fine, but i dont really want to spend hours doing it again, not understanding what the problem is and run the risk of it messing up again.
I am so very confused as to what is going on so any help at all would be awesome. Its very frustrating to work on something for so long and it fail during export.
I will attach an image showing a glimpse of what my problem is. (Please excuse the camera work)
Thanks again
Dan
Specs.
2012 iMac
Processor 3.1 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 512 MB
Software OS X 10.9.1 (13B42)

The triangles indicate hard media boundaries -- there are no more frames available from the source clip beyond that frame. If you don't have a triangle on a clip at an edit point, then the source media has frames available beyond the in or out point of that clip instance on the timeline.
There are a few things that might cause what you're seeing, so I recommend you check your multicam source sequence to make sure that it's referencing the correct media, and that all the media in your project points to the correct files on disk. Double- and triple-check that all the clip instances in the timeline point to the correct sequence or media. If the problem is related to clips on the timeline not pointing to the right thing, you could save yourself some work by trying to fix that instead of re-creating your edits. You should also see if you have any Auto-Saved projects that don't have the triangles at the edit points and that play the edited sequence correctly -- you could save yourself even more work.
Cheers,
Jeff

Problem exporting Premiere Pro CS5.5 projects with still photos and h264 video

I'm a longtime Final Cut Pro user and evaluating Premiere Pro for my workplace before making the switch. I have been running into several problems when I try to export raw h264 video from a Canon 5D combined with still images on a Macbook Pro. Either I receive an error in Premiere Pro saying, "Error compiling movie. Unknown error." or Adobe Media Encoder appears to continue exporting (the time elapsed bar continues to move) even though the time remaining stays frozen once it hits a photo it doesn't like. It's not always the same photo.
I've spent several days trying to troubleshoot the issue, including batch resizing all photos to 1920 wide (to match the video settings), and it hasn't work. The sequence is currently set to render in ProRes 422. I've also tried HDV 1080p30 and MPEG-4. I cannot find any consistency with the errors. Occasionally an export will work, but every couple still photos will look like green static. I've also tried batch converting the photos in Photoshop to PNG and GIF without any luck. I'd include my default export settings but I've pretty much tried it all. I'm just trying to figure out what's causing the error since the message is very vague.
Couple other notes:
There's plenty hard drive space available for export
I can export the DSLR video (h264, 1080p30) without still photos no problem
I can edit the same still photos and video in Final Cut with no problem
I have the same problem with auto-save on and off
I tried re-installing production premium, deleting the preference files and cleaning the media cache - no luck. I also tried exporting under a different user account and it wouldn't work.
This is driving absolutely crazy. I'm affraid to use PP on deadline because I don't see any issues until it's time to export. Any ideas would be greatly appreciated. Thanks!
- McKenna

Thanks Todd. Your questions were actually very helpful. I'm using a Macbook Pro with an Intel Core i7 processor and NVIDIA GeForce GT 330M graphics card. I'm running OS 10.6.8 and have the latest updates installed.
When I disabled the GPU acceleration, I was able to render and export without a problem. The problem only occured when using the GPU acceleration and mixing h264 with still photos. It also affected both rendered previews and the final export. I'm assuming its a support issue with the graphics cards, but it would be great if you had any other ideas. I appreciate your help.

BIG PROBLEM BETWEEN PREMIERE PRO CS6 and FAST TRACK PRO

Hi there...im running premiere pro cs6 on macbook pro 2010 with 8 gb of ram...im editing a project of hd material from a canon 5d..i got all the sound from an external recorder, all the sound is already syncronized... i need to do some cleaning on it....i got an USB fast track pro from M-audio that work well....
the problem is this : every time i have to send a clip to another aplication for the cleaning of the sound( audition with dynamic link or soundtrack pro exporting a .wav file) after a while (it can be a couple of minutes or more) i listene a clic on my headphones and the sound goes back to the speakers of the macbook pro, after that i must reconfigure again the audio hardware and audio output mapping again ( this happen almost with every clip and only between audition and premiere) anyway i started to use soundtrack pro to avoid this problem... but what is happening now is that many times after i listen the clic on the headphones or after im tryng to go back from one audio application to premiere, premiere freeze out or shhot down....
the poject is kind of big and restart premiere 3 or 4 times in an hour of job in my mac book pro its not what i call a productive hour oj job...
somebody have the same issue??
please let me know becouse im starting to get really mad...
anyway ill post also in the m- audio website to check it out over there
thanks in advance

Hu Simon...thanks for the answer but how i already writed in my post im on a macbook pro(internal audio card are out of the question)...
anyway are you suggesting that adobe doesnt work well with usb audio devices???
becouse for now i have to stick with it....
if somebody got a suggestion please let me know

Problem with Premiere Pro CS5 project files bloating

Has anyone had the same problem that we're experiencing? - we have Production Premium CS5 installed on a machine with Win 7 Pro x64. We have three separate edits all of which are experiencing bloating of the .prproj project file. Often this bloating seems to occur when no importing of assets has occured, just changes in the edits. A project which started at 5mb has bloated to 1.5GB and we can no longer save it. Another project has bloated to 200mb and continues to grow in size. We have not brought in any weird assets, although we are using hi-def footage.
We upgrade from CS3 and never had this problem using Premiere CS3.
We can't fix the problem by 'remove unused footage' as this doesn't reduce the project size, although it does remove the unused footage.
We can't fix it by importing the project into a new clean project as the problem and huge file size just comes with
We can't fix it by using the project manager to collect up the project as it requires to save before collecting and the problem files can't be saved.
A couple of points to note - these projects were originally on Premiere CS3 and were upgraded to CS5. The footage is either Sony EX3 or Canon 5D - both HD.
The machine it's running on has 8gb of RAM.
Currently the projects I'm working on are gradually grinding to a hold with no way to make the files usable again.
Any suggestions are greatfully recieved as I'm at a loss. I've reported this to Adobe, and will report back if I get anything useful.
thanks.

natswilson wrote:
TClark,
I'm shocked that you are having the same problem on a mac. This seems to suggest a problem that could be really widespread. You've also beaten my 1.5GB file bloat size.
What the hell is going on with Premiere Pro? I'm surprised to have heard nothing from Adobe either via my support request or on this forum, save for Jeremys useful work around, considering how serious an issue this is.
I've had to break all the projects I'm working on which have multiple timelines in each project into a new seperate project per timeline in order to reduce the file bloat problem and reduce the risk of me loosing all my work in one go on a bloated file.
Adobe - we could do with some help here. It's frustrating to have spent so much money on licences for this software only to have virtually non-existant help when a serious flaw in the software manifests itself.
Nat
Yeah...it's really a bummer that no one is acknowledging it. It's pretty serious!
I hope Dennis jumps in soon!

Problems with Premiere Pro- Quits unexpectedly

Hello,
I have several key problems on Adobe Premiere CS6"
The following problem happens when I not only edit, but save, and export my project into a video file.
"Adobe Premiere Elements Has Encountered A Problem and Needs To Close - We Are Sorry For The Inconvenience"
I dunno how to solve or prevent this issue. Is it that my Mac lacks to power to edit, or are any of my settings off?
I don't think its Premiere that's the problem...
I'm guessing that either my preferences are wrong, or I'm just using too much or too large of footage to use on my sequences.
The camera I use is a "Sony HandyCam HDR- PJ650V", and the average video file runs around 1GB.
The media format is ".mts" and the only software that can understand it is Adobe After Effects or Premiere.
I've already lost so much time trying to figure out this problem, also hoping that same generic error message doesn't appear and crash Premiere again.
It always pops up!
Please help!!
This error message appears randomly through the following tasks:
1. Saving the project- It crashes w/ the same message after I click the save button.
2. Scrolling/previewing my project on the timeline- It might be processing or a GPU disfunction, but After Effects CS6 seens to be running smoothly enough, along with other somewhat hefty programs, like Photoshop. given the graphical prowess it requires.
3. Rendering the sequence, or composition (AE CS6)- I export my projects with the following settings:
Format: H.264
Preset: Youtube HD 1080p, 25
Audio format: AAC, 48000 Hz, Stereo
Also one thing to note, is the GPU is Mercury Accelerater engine, and I cannot change that to running off the CPU, not that GPU
The following specs are what I have to work with:
Mac:
I am using an IMac with software version 10.7.5.
   -Processor: 2.8 GHz Intel Core i7
   -Graphics: ATI Radeon HD 4850 512MB
   -Kind: ATI Radeon HD 4850 OpenGL Engine
   -Version String: 2.1 ATI-7.32.12
   -Open GL Version: 2.1
   -Texture Memory: 512
   -Serial Number: W89526355RU
   -Software: Mac OS X Lion 10.7.5 (11G63)
Adobe Premiere Pro CS6:
Version:          6.0.0
Last Modified:          4/29/13 10:31 PM
Kind:          Intel
64-Bit (Intel):          Yes
Any input/advice is greatly appreciated!!!

Two problems:
Wrong forum, go to the Elements forum
Mac

Multicamera edit problem in Premiere Pro CC

Similar Messages

Maybe you are looking for